I am trying to create a validation rule whereby If a box is checked it makes sure that before saving and moving to the next form several, though not all fields are valid.
Ive tried many variations of:
([x] Is Not Null) OR ([Y] is Null) And ([x] Is Not Null) OR ([Y] is Null] etc etc for the fields I need covered.
Either the rule doesnt work at all or else all data input is invalid!
I have a main form which has couple of subforms bound to one main table. One of the subfomrs is about employment info. It has 3 TextBoxes: (Job Start Date), (Employer Name), and (Wage).
It has also 3 ComboBoxes: (Job Type [Full Time or Part Time]), (Hire Status [Permanent or Temporary]), (Quarter [1st, 2nd, or 3rd]).
I want to force users to fill all these 6 fields if they put any value in any one of them. I tried to set a Validation Rule in the TextBox/ComboBox’s property including IIF statement condition, but I did not succeed, and these rules did not work.I put the following code in the subform’s (After Update), (Before Update), and (On Current) events which works very well when I keep the (Wage) value 0 and move to a new record or to another subform:
Private Sub Form_AfterUpdate()
If Me.[Start Date] > 0 And Me.Wage.Value = 0 Then
MsgBox "You did not put how much is the wage."
Cancel = True
End If
End Sub
[code]....
how to make a similar validation rule for the other TextBoxes and ComboBoxes.
I am trying to create a validation rule for one of my fields.. i want it to be so that the user can not select a date to be on a Sunday..
View 2 Replies View RelatedI am building a scoring system for an Archery Tournament and am trying to add some extra validation between two fields.I want to check the contents of one field against another.So if Field A has an even value, then Field B must also be even, and if Field A has an Odd value, Field B must be odd.Would it also be possible to add an exception such that if Field B = 0 then the validation rule does not apply?I am only a very occasional user of Access, and don't have a very good grasp of the code structure in it, but am prepared to try and learn.
View 4 Replies View RelatedMany times I have appended tables. But now I am struggling even trying to append 4 fields defined as text.
View attached zip file.
How can I use the validation rule to set field to required instead of checking required field, because I wish to customize the prompt message.
Thanks.
Hi
I have a form which people fill in (made up of fields from Table1) to record when sick days.
On the form, they have to enter the "week commencing" (which is set at Medium Date format); then they have to enter in a first day (which is set at Short Date format).
The First Day should be no more than 7 days from the date that they enter in the Week commencing field on the form.
I want an error message to pop up if they do this, for example:
Week commencing: 1st April 2007
First Day: 10th April 2007
(because the 10th April 2007 is more than 7 days from the 1st April). But it would be ok if they did this:
Week commencing: 1st April 2007
First Day: 8th April 2007
Help???
thanks!
Maria
I created a field in access 2010 called OptionalSubjects . It is a multi value field where a user can select multiple values from the combo box, the selection are ID from a query. Now i want to limit the user to only two selection from the multiple values available and not less than two. So the field is either NULL or two selection only. How can I achieve this in validation rule or vba.
View 3 Replies View RelatedIn the forms for my database, I require the user to input a month and year. Due to how the reports are structured, I need the format of the month and year to be very specific. I tried to set the format as 'mmmm yyyy' however even though it is visibly displayed as this, in the table, the values are still stored as sometimes 6/1/2011 or June 2011 and Jun 2011, which in Access' eyes are two different values.
In the report, it will display June multiple times because of this format discrepancy. I am trying to create a validation rule to ensure the user will enter the month and year in the correct format, but how to go about writing the expression.
This is pretty simple but I need to place a validation rule in my table for a field so that users can only enter data that starts with APB. What would the rule be?
View 1 Replies View RelatedHow to create a validation rule in relation to another fieldname in the same table?
For example, the first field line is the serial number, and when something is entered for the serial number the OTHER field line (which is quantity) needs to be 1, otherwise it stays blank.
I use access 2007 or 2010 depending what computer I'm using.
I am wanting a text field in a table to accept only chars A - Z
In my validation rule I use
Like "a" Or "b" Or "c" Or "d" Or "e" Or "f" Or "g" Or "h" Or "i" Or "j" Or "k" Or "l" Or "m" Or "n" Or "o" Or "p" Or "q" Or "r" Or "s" Or "t" Or "u" Or "v" Or "w" Or "x" Or "y" Or "z"
Which works :D
Then validation text I use
Enter Alphabetical Letters only
Also works :D
Is there any short way to write Like A.....thorugh to Z without the long statement?
I want to create a field validation rule that requires the user to input a policy number in a standard format. The format has a fixed length of 13 with three underlying components. The first 3 digits identify coverage, the next 7 are the policy number and the final three must always be "-00".
Example: GLO1234567-00
Is it possible to create a validation rule for this ? If so, can you provide the code based on the simple example above ?
What would I need to enter into the validation rule to change the field to alphanumeric only?
View 3 Replies View RelatedI have two tables in Access 2010:
Tbl1 - Abbreviations: with fields (1) "Abbreviation" and (2) "Definition"
Tbl2 - Piping: with multiple fields one of which is "Unit"
In Design View of Tbl2, I'd like to set the "Validation Rule" for the "Unit" field so that it is restricted to values in field 1 of the Abbreviations Table (i.e. one of the listed abbreviations").
I tried variations of "[Tables]![Abbreviations]![Abbreviation]" in the "Validation Rule" portion of the Design View for Tbl2 (Piping) but, couldn't get this to work.
I only want the user to be able to enter 9 numbers into the field including 0 in the beginning if needed.
I have this code in at the moment "Is Null OR Between 100000000 And 999999999", however if the number starts with a 0, it doesn't include it.
Else I'll just use an Input Mask
TextBox1 Validation Rule is
>=0 And <21
I would like to replace the error message
" The value you entered doesn't meet the validation rule...."
I made a start with the OnUpdate Event
If Me.TextBox1 <= 1 Then
Msgbox "Whoops..."
Else
End If
But, although my message box appears, (nothing else does) the Validation Rule is ignorred and then zero entry causes an error.
So, I'm guessing, my If Statement has to catch the whole Validation (somehow). Am I on the right lines?
Can't we give conditions on Validation Rules? (Like IIf)
IIf(getusername()=[Log_Resource],Between DateAdd("d",-1,Date()) And Date(),Between DateAdd("d",-2,Date()) And Date())
I am using Access 2010 on Windows 7 (64-bit).
I have create a table clients that contains multiple column i.e. Id, First Name, Last Name, Starting Date, Company , while defining the table I did not mark REQUIRED property of any column
I have created a form based on this table "CLIENTS",
I create the company as combo box and taking the list from COMPANIES.ID
I put the validation rule as IS NOT NULL and put validating text Select Company from list.
If I marked REQUIRED property of this column in table definition as YES then it displays system generated message with tablename.controlname, while i want to display my own message.
But when i input the data and leave the Company column blank the validation is not executed.
There are three columns in the form on which I want to apply the same validation.
Is there a way to add a validation rule in an access form on an unbound text box. This box is currently doing a calculation of others. If the figure is not between 0 And 0.3125 then I do not want the user to be able to move on. For some reason if I enter "Between 0 And 0.3125" in the validation rule it doesn't seem to do anything. I can only assume its because its an unbound text box. Data attached please see Frm_Input and text box total standard hours.
View 4 Replies View RelatedError: Error evaluating check constraint in the validation rule
What does this mean?
I have used a combo box in the table to input into 2 fields - one restricted to numbers 1 to 5 and the other restricted to letters A to E
Message comes up when I try to change the view or press submit. Does it have anything to do with the field type?
Hey I have a little problem, I have this assignment for school to make a simple database, I did all that but there's one little thing I can't seem to find.
I have to limit a Field's length to 15, but not through Field Size but thanks to a validation rule, and since I don't know a lot of validation rule commands I have no idea what the syntax is for the field length. How can I do this, it's pretty urgent actually, need to have this by tomorrow :s
Thanks!
Relatively new to access, just trying to create a range in a validation rule. What I have are 2 cells, Date_Taken and Date_Returned. I want Date_Returned to only accept values between: Date_Taken and equal to or less than the current date.
Between "Date_Taken" And <=Now()
is what I've got at the mo', yet it's not working. I'm gathering that I'm referring to the Date_Taken cell incorrectly. Any help? I don't see any tools to fix such a thing.
Hi
I need to know how to set a rule to a password field that the user
only be able to type english letters and numbers .
Any idea how?
Thanks
Hey guys, what is the easiest way to validate a field based on another.
I have 2 combo box, lets say cboOne and cboTwo. If cboOne = 1 then cboTwo must be blank/Null. Can I place this validation in the table validation properties. If so, how do I word the validation code.
Hi,I'm really struggling to try and find a solution to a problem.I need to find a validation rule that only accepts:letters, spaces and hyphens (-) in the field.I have tried for at least 14 hours today and most of yesterday afternoon, but I just can't get it.The furthest I've got is rejecting everything except from letters and spaces, with each these codes individually:(I've only listed a few so you could see just a fraction of what I'd already tried)Is Null Or Not Like "*[!((a-z) or (Chr(32),Chr(45)))]*"Is Null Or Not Like "*[!((a-z) or (Chr(32)) or (Chr(45)))]*"Is Null Or Not Like "*[!((a-z) and (Chr(32)) and (Chr(45)))]*"Is Null OR Not Like "*[!((a-z) or (( ),(-)))]*"Is Null OR Not Like "*[!((a-z) or ( ) or (-)))]*"Is Null OR Not Like "*[!((a-z) and ( ) and (-)))]*"Is Null Or Not Like "*[!((a-z), ,-)]*"However, it is also rejecting hyphens, which I need it to accept.Also, unfortunately it is accepting bracketsHopefully someone here will have a solution, because I'm stumped, :confused:James
View 14 Replies View Related