I just started my project database on my subject ITM4. My Database is entitled PCExpress Inventory System. I would like to know how to input (Text) in a Field where the Data Type is (Number) just like the North Wind.
View RepliesFrom a table I want a text field which has a path to a file to be copied automatically into a another field of the same table with a hyperlink text type...
View 5 Replies View RelatedI have a table with a field with names set to text data type and i want to change it to number data type but when i do it in design view the data get lost. I want to know if there is a way to convert the data in the field as number type and keep the data in the field.
View 7 Replies View RelatedI want to input data number such as 0.5 in my table, but it doesn't work. I already fill field size : integer with format : Standard with Decimal : 2, but the result is always 0.00 not 0.50 as my expectation. How to define that in my table?
View 5 Replies View RelatedI have an existing form where users type in information and it generates a couple of reports. In one of the fields, Customer PO Number, the user enters a number from a customer. Up until yesterday all of the customers we have been dealing with have used numbers only for their PO numbers. However, we have a new customer that requires alphanumeric PO's. Is there a simple way to change this field from a number to alphanumeric without having to redo each form, report and/or query. I am using MS Access 2010.
View 9 Replies View RelatedI have two tables(see below). I want to set up a query, link these 2 tables together. I set a one-to-one relationship between Client ID in two table. But got error message :"Type mismatch in expression".
I tried to change Client ID data type from "Text" to "Number", then Access deleted some data under Client ID in Order table.How can I make this work, but not having to re-type in all data?
Client Table:
Client ID(Autonumber)
Client Name (Text)
Client Address (Text)
Order Table:
Order ID(Autonumber)
Client ID(Short Text)
Unit Order(Number)
Unit Price
The DolphinBatchNo has number data type but the following sql statement doesn't capture the ight records. it doesn't check id dolphinBatchNo is blank.
Code:
strsql="select * from `MasterTBL` where PolicyNumber>=" & TxtFPolNo & " and PolicyNumber<=" & TxtLPolNo & " and PolicyStatus='Live' and DolphinBatchNo is null order by PolicyNumber"
I have a table with about 300,000 records. About ten fairly small fields per record. I am trying to change the length of a text field from 25 to 40 characters, and I get the error message, 'MS Access can't change the data type. There isn't enough disk space or memory'.
I have never seen this message before. I have about 64 Gig of free disk space. What can I do?
I have encountered an issue when I was inserting a string (with newlines about 176 characters) into access table. This field in access has the data type TEXT and it was truncated after the insertion. It is strange because I have three other fields with the same format and no truncation at all. May I know what could be the reason and how/what is the recommend data type for storing long text?
View 3 Replies View RelatedIs there a way to setup the format on fields to only allow text inputs, no numbers wanted. I know I can do this at the table level but is some cases numbers are ok. So I want to code it so I can control when numbers are ok and when there not.
View 1 Replies View RelatedI have a form with a list box on it that has 4 teams (Team1-4)..Below this list box I have a text box:"People on shift tonight"..I want to be able to select a team from the listbox and this prepopulate the people on shift box with the names of the colleagues from the team specified, is there a way to do this?
View 2 Replies View RelatedI an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
I have created a member data base form in Access2010.
That has been populated with 366 member records
I have two text box fields that are currently free type fields, Member Type & Member Status.
What is the best way I can change these to show only the relevant options:
i.e. Member Type ( Full, Family, Pensioner, Life. )
Member status ( Current, Lapsed, Deceased)
I have tried to right click the field but the "change to" option is greyed out & not available.
I have also tried to insert a combo box or list box to show these options. The "use control wizard" option has been highlighted but when I drag either a combo box or list box into the form. the wizard does not activate.
I had posted this a couple weeks back but it didn't help much in the end, thanks to anybody who posted there anyway though.
I've used the Lookup wizard to make a lookup menu in one of my tables. The field I tell it to refer to in another table is a Text type. However, after the lookup wizard completes the type of the field which is uses the menu is changed to Number.
At this point it can be kind of whacked out and inconsistent, but what usually happens is if I select a value from the lookup field it refers to the auto number that I used as a primary key for the looked up value.
I created a new table, and tried to do a lookup field for for the same fields and got the same problem - I think it's an issue with the field I'm looking up.
I'm 100% sure I didn't do anything stupid like select the ID auto number for the lookup... So what's going on?
I have
Table called "Products"
Field 1= "Product ID" which is a text field (PK) but numbers are used (ie 1 -20)
Field 2= Products -showing our list of 20 products
When I enter a new product, currently I have to look in the table to find the last ID used then use the next one available. I have created a form to be used for data entry to enter new products
What I am trying to do is :- 1, have the form open at data entry level but still able to scroll and see all records and 2, Have the form auto generate the next number available. For example, I have 20 products entered so when the form opens to enter a new product, the ID is automatically at number 21.
I wondered if its because the field is a text field or I am trying to insert the code in the wrong place.
I'm scanning serial numbers in a field, but the results always start with an S...like S123456789 , S107432567 etc.. how can I eliminate the S and make this field numeric?Access 2007 being used.
View 4 Replies View RelatedI have a multivalue text field called "Groups" that is generated through a relationship with another table called "Comments". When I set this up I left the field as a text field when it should have been a number field, and now I can't use the database with sharepoint, because the field needs to be a number field.
My Question is there a way to convert it without loosing all my data, as there are over 5000 records?
My Table with the multivalue field is called "Contacts", the field is called "Groups".
I tried update and append queries but I must be doing something wrong....
I have a number field in my subform that's autoupdated but I'd like it to display "weeks" beside the number without trying to store it, is this possible?
View 2 Replies View RelatedI have two tables in a query joined by a ID field. The problem is in the one table the ID fiels is a text format and in the other table its a number format so the query builder doesnt like that and gives me the Type mismatch in expression error.
There's no way around it though; i need it to be those formats in its respective tables for reasons i wont go into here for simplicity.
I have a DB that was given to me with a SSN field that has the Number Data Type. Therefore, if the SSN has a zero as the first number, it is not coming up. Other than changing data type to Text, is there a property that would keep the initial zero? Thank you for your assistance.
View 2 Replies View RelatedI have a form in Access2000 with 5 text fields which get transferred to the table for each new record. Is there a way i can "LOCK" one field so that once the user has input that data it never changes until closed. I can already lock the field but once i create a new record the field then goes blank.
View 4 Replies View RelatedI am trying to format my Number data type to look like this: 0001 / 2013 where "0000" is the prefix, 1 is the number and " / 2013" is the suffix.
Tablename: tblclients
Field Name: DelNoteNo
Data type: Number
Form
Control Name: DelNoteNo
Control Source: DelNoteNo
I am searching on this forum but I can't get it working.On the Before Up date procedure i have:
DelNoteNo = Nz(DMax(DelNoteNo, "tblClients"), 0) +1
but its is giving "invalid use of Null "
Is there a way to create a text default value for a control box that is bound to a number field?
I have a combo box that is bound to an auto number ID but displays text. Bound column = 1, Number of column = 2, Column width = 0; 4cm
I want to use sample text in all my controls (and I know an alternative would be to use the control tip text). In a text box it is easy, I just set the default value to that value and then a before_update event considers the text box empty if the field value is the default value (e.g. Name text box has: Name... as default value). This doesn't work with my combo box since the bound column is a number. I could create a value in the table but then it would appear in the drop box and it is messy.
[URL] .....
In my report, I have combo boxes that display numbers (for example min_revenue and max_revenue).
In case of a "0" or "999.999", I would like to display "n/a" within the combo-boxes.
I would like to avoid doing this within the table, because I would like to keep the data type in number format.
Remark: I confused "combo-box" with "text box". I'm using text boxes, which are supplied with values from a table
I have an order table [OrderMain], which contains [OrderNumber] "Auto Number" along with various customer related only info
Then i have a order line table [OrderLines] which contains the items ordered. Which looks like
OrderNumber
OrderLine
PartNumber
These tables are in a form, relationship of [OrderNumber]
This structure enables me to order as many parts as i'd like against 1 order number.
What i would like to do is set something similar to a auto number in the OrderLines table. This would be in the Lines Field.
The problem is, AutoNumber can't be used in the [Lines] field as each new order line # would continue from the last #.
The result would look like:
DLookup function. (this is for a stamp collection database).
On my form ("InventoryInput") I have a text box called "Catalog" for a numeric entry and a text combo box for selecting a "Country" in drop down list.
I want to query a table called "CatNameList" to get the "StampName" of the item (based on the entries of Catalog and Country) and populate that name in the text box. The fields in this table are called "StampName", "CatNumb" & "CName" respectively.
I have successfully placed the following expression in the control source of that textbox and able to populate the StampName I need based solely on the catalog number alone.
That express is :
=DLookUp("StampName", "CatNameList", "CatNumb = Form![Catalog]")
So it will populate the "StampName" data to match the "Catalog" number entry just fine.
However, I need to add a second layer to incorporate the Country.
Example : There is a catalog "1" for "USA", and a catalog "1" for "Canada" but both have different "StampName".
I have been attempting to get that second piece added with no success. Here is the expression I have been trying to get to work :
=DLookUp("StampName", "CatNameList", "[CatNumb] = " & [Catalog] & " And CName = '" & [Country] & "'")
Right now, the text box is just blank with the above expression. I thought it may be because there was no match found, but I have triple checked to ensure I have the spelling correct on the country name in both places.
Basically, I just need the dlookup to take the "catalog" and "country" off the form and match it to the "CatNameList" table fields of "CatNumb" and "CName" to give me "StampName" field back on the form.