How do I restrict access to the database while still being able to add a new hyperlink? I tried deselecting the "display navigation pane" option. But when I do this I am unable to add/edit a hyperlink in a form - when I right-click the only option I get is "add to favorites" rather than "edit", etc.
View Replieshow to restrict access to forms and reports using the Active Directory. It is a pretty simple method to pick up and easy to use in any database. My problem comes when I try to apply this same method to tables and queries as well.
View 5 Replies View Relatedi have a database that has a hyperlink on the table, my concern with this is that if the folder with the linked items(pdfs) is moved to a different location then does that mean that all the links will not work? if this is so is there a way to get the links to point to correct items other than manualy doing it ( there are thousands of links ) the reason i have used links is to keep the database small in size.
View 3 Replies View RelatedI have a number of databases in my system and I created a database that only has a switchboard form in it. This switchboard form has links to all of the various databases I have created and opens their default input form. This works fine but now I wish to place a button on the switchboard to run a report that is located in one of the databases.
I tried to use the hyperlink command in the switchboard database but that will not show me the information in the other databases only the switchboard database. I assume I have to link the databases and create a connection to the other database and its report.
HI All,
I have scoured the net and these forums looking for the answer but cannot find a good solution.
I am producing flow charts in Visio, and then saving them as HTML documents for use on our Intranet. Within the Visio flow diagrams I am using Hyperlinks on various shapes and text, to enable the viewer to open various other documents in various other applications. This seems to work fine in my web browser for normal office documents, like word and excel, but I need to be able to do it for MS Access databases too! Because the web browser tries to open it in the browser itself, the database won't open and I just get the normal "Web Page Could not be found" screen.
Another useful feature would be to be able to open to a number of different specific forms from a database, depending on which hyperlink is clicked. I assume this is not possible as you only seem to be able to define on page to be displayed upon opening the DB. Am I correct?
Any assistance would be greatly appreciated.
We are using access 2010, I have a blank form that produces an ID number for the specific record when saved. then i have other forms where the ID field is hyperlinked to the original form that was entered. I now have 2 users that are unable to open the hyperlinked form. when i login as them im able to open the hyperlinked form.
Private Sub ID_Click()
On Error GoTo Error_Catcher_1
DoCmd.OpenForm "NewRequestForm", , , "ID= " & Me.ID, acFormEdit
[code]....
I'm trying to create a pdf report displaying records in a columns, with each record having its own hyperlink. Rather than displaying the actual hyperlink, which is quite long, I'd like to portray a friendly_field like in Excel (Hyperlink("Link"). Hyperlinkpart doesn't seem to do this.Is there a formula I can create in a query where I can reference each individual hyperlink but show it as a "friendly_field" such as "Link"?
View 3 Replies View RelatedMy query is how to restrict a user when he logs in......say for example, if he is a guest user he will not be able to change the setting neither he will be able to see the design mode..i am using access 2003
View 3 Replies View RelatedIs there any way for me to have a button on my frontpage visible to only people i name
e.g.
if user = john smith or user = fred bloggs then show the button if not do not display it.?
Being a novice step by step idiot proof help would be appreciated
TIA
I am displaying table records in access form Datasheet view. While business users accessing that form, they are hiding and rearranging some columns for their use. So it will be hard for other users to access. I just want to know any settings are avaible in MS Access or can we accomplish this using any events or macro or modules??
View 14 Replies View RelatedHow to restrict the updation of a record while entering until a save button is pressed on the form ???????? is it possible without the vba ?
View 10 Replies View RelatedI have impletemented a user system for my database with different access levels relating to entering and editing data.
I would like to make certain forms only accessible to a specific group of users. Is this possible and how?
Thanks,
Gary
hi
i am having a login form.
where i have only two users..may be 3
suppose it is admin and guest
then i have a main form where i have 5 tabs,...where each tab contains 7 or more command buttons which will open some forms
what i need is when the admin is login he should be able to edit add delete
but if it is a guest then all the forms should be read only
i know abt the allowaddition and etc..but i don't know where to use it..
is it in the login form or in the main form or in each and every form
regards
jenson
I have a staff database in my office which holds, amongst other things a list of staff holiday taken. Presently the staff have no access to view holidays because they will also be able to view other employees details. What I need to do is enable members of staff to see their own holiday, but no others and Im really not sure how to go about it.
I have a workgroup in place; so each user has their own login/password.
Any ideas would be gratefully received.
Thanks,
Adam.
Hi, I would like to know how to do the following scenario in Access 2000.
Imagine I have a table, which has two fields X and Y.
User can only enter either field X or Y, but not both.
How to check the above case while user is real-time keying in the fields of the table?
Thanks, Sally
I have the below script:
For Each Item In offexchfldr.Items.Restrict("[SenderName] = '" & frmfm & "'") ' Select Items that match Sender Name on form
If Item.TaskSubject = subid Then
Item.Categories = frmcat ' Update category from form to outlook
Item.Save
End If
Next
This script checks every item in the outlook inbox where the item.SenderName = my database sendername
This works every time except for when the sendername has quotes or single quotes in their name. So i am trying to utlize the replace method on the item sendername before trying to find the items in the inbox but its not working.
Below is my attempt that does not work.
For Each Item In offexchfldr.Items.Restrict("Replace([SenderName],',"") = '" & frmfm & "'") ' Select Items that match Sender Name on form
I created a database which when macros are enabled the only thing visible on the screen is the forum. All tables as well as the ribbon bar is disabled. I also disabled right-clicking.
My issue is, for those who do not have macro's enabled, it opens up in design view and allows access to the left-hand tables until the user clicks the trust button at the top. Once trust is clicked, everything hides as expected.Is there a way to restrict access if they do not have their macros enabled?
I have a database in Access 2010 where I've created a navigation form, and I want a regular user opening the database to enter a password and only have access to that form, and not the actual tables or the navigation pane. They should only be able to view, add, edit, and delete data through the forms I've prepared, and I don't want them to be able to get to the tables themselves unless they have an admin password. I tried looking up how to do something like this, and I tried splitting the database, but it seemed like I was still able to go right to the tables and edit them from the navigation pane even in the front-end, and if I removed the navigation pane links to the tables from the front-end, the forms I made wouldn't be able to display anything from them anymore, and that's not what I want either.
So, I want one password to give access only to my navigation form and nothing else, and then a second password to grant access to everything else.
Is there anyone out there that can help me with this problem. I want to create a hyperlink in MS Outlook to my database file using my workgroup. The problem I'm having is when I put the following: file://"N:DbaseFilesSCC_Dbase.mdb" that works. It will open Access to that dbase file. But if I include the workgroup file associated like this: file://"N:DbaseFilesSCC_Dbase.mdb" /WRKGRP "N:DbaseFilesCSS_Issues.mdw" it doesn't work. Can someone please tell me why. I've been struggling with this for days now. I can't find any solutions.
View 2 Replies View RelatedI have 2 databases (accdb). Both databases have a loading pop form. Also both databases include the following line of code when the loading form opens:
Code:
docmd.runcommand acCmdAppMinimize
This code works great when I open the databases individually. but my problem is that I have a label on the pop form in accdb 1 with its hyperlink address set to accdb 2 and the subaddress set to the macro name.The hyperlink opens the database 2 just fine and it opens the loading form but it doesn't minimize the application window.
I have to save the hyperlink of the copied file into a record of my database.
Private Sub Knop29_Click()
Pad = "C:"
Dim Bestandslocatie As String
Bestandslocatie = DLookup("[Waarde]", "tblInstellingen", "[Tag] = 'Locatie'")
With Application.FileDialog(3)
.Title = "Bestand selecteren"
[Code] .....
The column where the hyperlink of the copied file has to come is "data".
As you can read the code i tried to do it this way: Me.Data.Value = NewName, but then i only get this pad saved into my database:
hns019afdelingafd_tdHasseltOpslag documentatie TDMaxihalKranenKraan24TraverseSoftware
So i need to find a way to past the file name after this link so that it becomes something like this:
hns019afdelingafd_tdHasseltOpslag documentatie TDMaxihalKranenKraan24TraverseSoftwareFile.exe
I have excel file with two fields:
Quote:
Model |Website
--------------------
Toyota |Press..
Honda |Press..
Website column is a function:
Code:
=+HYPERLINK("http://www."&A3&".com","Press..")
When importing to Access , the link is disappeared.
How to keep the 'Website' field value, based on 'Model' (as in Excel)?
I need to get an email address from a field and place it onto another form.. HOWEVER I dont want it as a hyperlink, nor do I want the mailto blah blah coming over.. I just want the email address as TEXT.In the application the user opens the email form by clicking an icon on an invoice screen, this will allow them to automatically email to the client.. Once they open the email screen they naturally see an arrangement of other boxes where they can enter subject, email description etc..
At the same time there are two boxes, the "To" box and the"From" box... I want these boxes to be auto updated with the email address (to save time). When the user clicks the icon on the invoice screen it automatically copies and displays the email address of the client in the "To" box on the invoice.. The problem I am having is that it is displaying as useless information which is associated with the hyperlink.The email address comes from a field that has already previously been associated as a hyperlink, and it HAS to come from this field, I have no way around it.... All of this information is coming from an address book section from a field that is a hyperlink field.. If it was a txt field then I would not be having this problem.
As I already have various forms open displaying information I am able to used simple code to fill in various bits of info to save time... Because of this I am using simply code to copy the email address from one form to another:
Forms![Email]![To] = Forms![AddressBook]![Email]
Obviously the above code is simple and works for 90% of this type of approach, however there must be some other code that I need to use to first translate the email address to text...
In the end I don't care what I have to do as long as it works.. Remember though that the original field is a hyperlink field and must remain so, I cannot simply convert that to txt..
How would I setup a hyperlink to a web page, from Access?
View 1 Replies View RelatedIm trying create a new form to add our current database that will password protect excel, word and if possible pdf documents when they are dragged onto it.
For now I only have 2 boxes 1 containing the password to be applied and the other to drag the file onto.
I have it all working so once its dragged on it works out if its a word doc, opens a hidden instance of word which then resaves it with a coded password.
The problem comes when change it so the user enters the password to protect it, when they enter a password or click on the drag box it doesn't allow the drag. it seems once they have entered the record the drag option is not available anymore.
I am having a problem with Hyperlink in a form when I click it tells me Run time error Microsoft access cannot follow hyperlink. Each records has its own link for specific file. If I click the link in the table it opens with no problem but in the form I get the error message to debug or end if I hit End it open the link.
Looked at the form - on click event procedures my command is
followhyperlink me.privileges
Am I missing something.