I would like a query to run, depending on a date..If the date in [Txt_Date_Account_Opened] is between todays date, and within the last 30 days.do CurrentDb.Execute ("Qry_Append_Units")else a msg box stating "account is not yet open"
View RepliesI have a report that displays simple date fields. One of the fields is "lease execution". On the report, I want "lease execution" to display differently depending on the date the report was run.
So:
- If the "lease execution" date is more than 120 days away from today, I want it to display as Q YYYY.
- If the "lease execution" date is between 120 and 90 days away from today, I want it to display as MM/YYYY
- If the "lease execution" date is 90 days or less away, I want it to display the normal date MM/DD/YYYY
I was thinking I would need to do DateDiff() to figure out an amount of days that's between Now() and [Lease_Execution]. Then based on that amount make the report show it differently. Pseudocode would be: if DateDiff() = 40, then display [lease_execution] as MM/DD/YYYY
I want to add a number to my results within a query depending on the month and how many results. For example I have 10 results in my query 3 from January, 5 from March and the rest from April. The 3 from January would be 1,2,3. The five in March would be 1,2,3,4,5 and so on. Is it possible to do?
I'm using access 2003.
I am searching the net for a response to my problem but no result;
I have 1 BD access (Facture) in witch there is 2 tables (Entete_Facture and Detail_Facture) with a relation in Field (Numero_Fac).
It is very easy to use "INNER JOIN" to do a Query (Facture_with_date) fusionning the 2 tables, But I want to add to this query another column : " SUM(Qte_Article) GROUP BY Code_Article " as below:
Hi Everyone.
Lets hope that after finding this forum, my slight problems will begin to ease off a little.
I am unfortunately one of those newbies trying to get in well above my head and level of ms access workings, but we all have to start somewhere, right?!
My problem at the moment is as follows:
The scenerio is i work for an excursions provider in Cyprus and I am trying to set up an online excursions site for them.
Now with any excursion, the price flutuates through the year when its low season, high season etc. I have built a MS Access database with the following tables so far.
Excursions details: this contains everything about the excursion on offer, along with additional columns for the price changes and dates that these apply for. ie. [adprice1][fromdate1][todate1], [adprice2][fromdate2][todate2] etc
Now what I am trying to acheive if at all possible is that when a viewer takes an interest in an excursion and selects the date they would like to go on the excursion, that the correct price is displayed for that specific time period i.e if it the date was betwen [fromdate1][todate1] or [fromdate2][todate2]
Is this at all possible and if so can someone please explain to me in real laymans terms what I need to do for this too occur within the database please.
Thank you in advance and sorry for waisitng anybody's time if this seems obvious to others and not myself!
Regards
2rsGarry
Hi
I wonder if anyone can help me out on a db i have inherited. Basically I need to add a field to a table and backfill the field with a number depending on a date field.
The new field (CallID) needs to record the order in which calls are received on a certain date (CallDate in the table). So for example the first call on 1/3/05 CallID=1, the second on 1/3/05 CallID=2. The following day CallID restarts at CallID=1.
So I'm looking for an update query which will set CallID for the several hundred existing records in the database. If anyone can help with a pointer or too, or example SQL, I would be very grateful
Cheers
The following code should sum a field depending on the date. The field IncidentYear is created and set to Last, This or "-" depending on the date. I should get three rows, one for each of the three values..
I get..... you tried to execute a query that does not include the specified expression as part of an aggregate function
I'm sure I've missed something obvious and I can't see it! If I remove the group by clause and the sum field..... it works.
SELECT IIf([Incident Date]>=#01 July 2012#And [Incident Date]<=#30 June 2013#,'Last',
IIf([Incident Date]>=#01 July 2013# And [Incident Date]<=#30 June 2014#,'This','-'))
AS IncidentYear,
Sum(tbl_2c_Acc.[Vehicle Off Road Time]) AS VOR_Acc_Days
FROM (tbl_2c_Acc
LEFT JOIN tbl_Value_Proposition
ON tbl_2c_Acc.Lessee = tbl_Value_Proposition.[Lessee No])
LEFT JOIN tbl_Vehicle_Type
ON tbl_2c_Acc.[Vehicle Reg] = tbl_Vehicle_Type.[Reg No]
GROUP BY IncidentYear;
I have a date and time stamp in a Date/Time field of General Date format (3/1/2006 7:52:25 AM).
I wish to select query on the table's Date/Time field by date portion only (3/1/2006) and not include the time portion (7:52:25 AM) of the field.
Using this expression in the query's criteria - "Between [Enter Start Date: (MM/DD/YY Format)] And [End Date: (MM/DD/YY]" will not return the date ranges as desired without also typing in the full time string.
How can the date integer be parsed out and the query properly expression ed on the criteria field without using VB?
I need to display a message on a form after a record update has been done depending on whether a table field is ticked or not. If it is ticked I want one message if it is not ticked I want a different message, but here is the scenario.
I have a form and one of the options I have is to call up an address from a record in a table. I want it to display a message to advise whether there is a special requirement for delivery to the address, so in the table I have a checkbox field. If its checked, once the address has been pulled up I want it top advise 'special requirement' or 'no special requirement'.
I need to do this in a macro form, or expression form if possible as I already have an after update macro when that drop down is selected.
So on the dropdown list I have the following on the afterupdate function:
SearchForRecord
Object Type :
Object Name :
Record: First
Where Co0ndition - - "[ID] = "& Str(Nz([Screen].[ActiveControl],0))
That brings up the address from a record in my table onto this form, so what I want is if that record has got a tick the checkboxfield it prompts with a message and ok button.
I have a log in form and user combo box.
I want to add photo of each user in this log-in form.
Just want to ask if possible to change photo depends on combo box value?
I need to add new records to a table depending on what the cbo box displays. I figure this is the way to do it but I it's not working, I have only writen the first select,
Private Sub Comando6_Click()
Dim dbPalavraChave As DAO.Database
Dim rstchaveCFEPC As DAO.Recordset
Set dbPalavraChave = CurrentDb
Set rstchaveCFEPC = dbPalavraChave.OpenRecordset("chaveCFEPC")
[code]...
Here is a project. I have a grid on a form. its width is 20cm wide and 15cm tall. in the grid are 6 groups of columns (all columns listed are from left to right).
Group 1 - 5cm wide - description
Group 2 to 6 are 30cm wide and represent days. Each group is split into 8 columns which represent hours per working day.
I need to to draw or position a line over the grid depending on what day it is and time. for example, lets say its thursday at 14.30. ( the 8 hour columns run from 8am to 4pm ) it would need to look like this-
So I need to work out the position of of the line depending on the time of of the day in the week. The day can be determined by the column header, the time by the grid....
I'm looking to have either a combo box,, or 2 options buttons (whichever is easiest) that set a date field based on what is selected in the combo box/ option buttons.
The variables are 'Payment in 30 days" " Payment upfront"
if "payment in 30 days" is selected the date field on the form will enter the date as + 30 days from todays date
if "payment upfront" is selected the field on the form will enter todays date.
This date field must be blank unless an option is selected, as this information is only entered in a later stage of the form.
I've tried a few different ways to enter this but i can't quite get it to work as i want.
I'm looking for VBA code.Basically I have a drop down with 3 options on a form but need it to pull up a window to input depending on which option is selected. One selection of the options if selected will not require the input of data, as it can just input a set value or be left blank (haven't totally figured how I want to display it). With all this I will need it to display on a form in a certain format, in which I would like the drop down value displayed with the data inputted, though with the one option without data just would display drop down value.
View 4 Replies View RelatedI have a checkbox which when checked then turns textboxes to locked as below. However when I navigate to the next record which may not be checked the text boxes remain locked. I obviously want to lock the boxes depending on each record. I am navigating via the windows next/back record buttons. How do i do it?
Private Sub Check44_Click()
If Check44.Value = -1 Then
serial.Locked = True
gain.Locked = True
swst.Locked = True
Else
serial.Locked = True
gain.Locked = True
swst.Locked = True
End If
End Sub
I have an option button for a field [Fully Paid] (Yes/No) in my LoanT and i want to know if it's possible for my database to automatically choose an option depending on a calculated field
(Calculated field from another query) = [Outstanding Balance]
Say... if [outstanding balance] is = 0 or negative (refundable), then Yes should be On, if not it should remain No/off so that i wouldn't have to go over every record and manually choose the option
The option button is very useful when i want to display loans which are Paid and/or still active. How do I go about this?
On my form I have a number of buttons named A1 to A6. I want to be able to click on a button and bring up a report that thows all records A6 if that is the button I have pressed or A1 if that is the button I have pressed. I know I could make each query individually, each one looking for the appropriate data, but I was hoping I could make one query and have the criteria change automatically depending on the button that I press.
Is this possible or am I asking a little to much of Access!
Regards:)
Hi!
I'm have a query with some fields but only one record. The values in the record depends on comboboxes in a form.
What the query is doing, is that is calculating percentage. So the problem is if you go from zero to something bigger than zero, then this this gives you an infinite value of percentage. I solved that by if it is a zero, then it's changed to null. Then the percentage will be zero.
What I want, or wonder, is if the value is zero, is it possible to to have a textbox or something "lightened up" in a form? What I mean is that if you do your choices in the comboboxes and this gives you a "bad zero" in the query then a text pops up and tells you that "the values are a little bit wrong" or something like that=)
More "shortly" said, can a texts visibility in a form depend on the value in a query?
Hope you understand what I'm trying to say...
Thanks in advance for any help!
-jake
I have 2tables,table1 id,name, table2 id,name,date.
How can i write a delete query that will delete everything in table2,if the data date is today?
I am trying to write a function in an access 2007 query that will calculate the date range for each of my records based on the month-ending date and the In-transit days assigned to each record (excluding any weekend days) (i.e. if the in-transit days number is 5 & the month ending date is 5/26/12 then my date range would be 5/22/12-5/25/12). I want the funtion to calculate the range, I cannot use parameters as each record will have a different range based on it's in-transit days .
View 1 Replies View RelatedI have a field that generates a date from when the first input is put into another field.
I know and can lock the "date" field in the form but is it possible to lock that date in the table and query?
Basically, I have a table showing our clients and when their next service dates are:
I need the query to show NEXT SERVICE DUE dates in January, AND/OR if NEXT LOLER has any January dates.
These should show as either or both fields have January dates:
Next Service Due: February
Next LOLER: January
Next Service Due: January
Next LOLER: December
Next Service Due: January
Next LOLER: January
I managed to do the NEXT SERVICE DUE with January dates, but not both
Now that the year has moved into 2014, the query below no longer works. It appears that it is not extending back into 2013.
Code:
Private Function multiDateClause(dateStartQry As String, dateEndQry As String, firstOp As String, secondOp As String)
multiDateClause = dateClause(dateStartQry, firstOp) & " AND " & dateClause(dateEndQry, secondOp)
End Function
Private Sub b_last7_Click()
Me.resultsFrame.SourceObject = "FollowUp_bystaff"
Me.resultsFrame.Form.RecordSource = todoListQry(multiDateClause("Date()-6", "Date()", ">=", "<="))
End Sub
I'm after a piece of code which works as described below.
I have a save button on a form
I have a append query ready to run.
When the save button is clicked, I want the code to see if a checkbox is true or not and if its true I want the append query to run if its not then I want the form to save and nothing else.
The following is a simplified version of a puzzle I'm faced with, but if I can solve the simplified version I'll be able to solve the real thing.
Take the following column:
MyField
1-2A-B
YZ-A6
53-75-XC
How within a query can I replace the hyphens with spaces but only where they appear between two numbers? So this is the result I'm after:
MyField
1 2A-B
YZ-A6
53 75-XC
(note that the letters and numbers could be any values in any positions.)
In one table I want to limit the options of one field depending on what is chosen in another field.
Field Type has two options: Receivable and Payable.
I want field Sybtype with this limits:
If Receivable is chosen in Type field you will only have CreditCard & Lockbox available in the Subtype field. If Payable is chosen you will only have Cheque & Transfer to choose.
Shall I have two separate tables? or only one table with Type and SubType as below? but then how can I make the above work?
Type SubType
Receivable CreditCard
Receivable Lockbox
Payable Cheque
Payable Transfer