Help -- Workgroup Security???

Jul 26, 2007

I'm trying to set-up and secure a networked multi-user database. I used the Workgroup Administrator to create a new workgroup and save it to the network drive. However, when I open my database, it seems it may still be pointing to the the default SYSTEM.MDW workgroup on my hard drive. Do I need to do something to my database to tell it to point to the new workgroup I have set-up? When I start having other people log in from different locations, will they need to join the workgroup or also point the database to the networked workgroup when they open the database? The manuals aren't very clear on this, please help.

View Replies


ADVERTISEMENT

Workgroup Security

Jun 2, 2005

Might be a stupid question but here goes.

I have successfully created my own private workgroup and have set up security levels for 4 users on one access programme that l have written.

I have a second access programme that l use with the same users, however l want to set different user parameters, can l set a second workgroup up as l did the first.

Is two workgroups possible on the same machine ?

Regards

Andy B

View 8 Replies View Related

Workgroup Security Sample DB

Jun 6, 2005

Can someone post a copy of a sample mdw file so that I may observe the design of the database? I am very new to the concept of db security and would like to take a look at how the design is constructed. Thanks!

View 11 Replies View Related

Workgroup File Security

Oct 27, 2004

This is more of a point of interest then a question, at work, Access defaults to a central workgroup file, so all Access files opened on a work machine will prompt for a user name and password, and only let you in if you get it right... but if you move the work group file, even after it has been open using that workgroup file, it will just let you straight in and GIVE YOU ADMIN RIGHTS!

No one really seems to know about this... does it happen if you manually set the workgroup file? Or is this just a security hole if you rely on the default? I'm not sure yet, haven't tested, but i fell people should be made aware (happens for sure on Access2002, haven't tested it on any others)

-mwalts

View 4 Replies View Related

Workgroup Security Alternative?

Apr 21, 2005

I was looking for free access add-ins through a search engine when I came across this site. I'm not sure whether or not some of the more seasoned programmers have seen this, but so far it looks like a less confusing alternative to the security features that access comes with. I'm not in any way advertising this, and I haven't tried it myself yet, so I can't speak about how good or bad it is, but it may be something worth looking into. Here are the links:

http://www.accesswizards.com/Downloads.html This lists the add-ins that are available from this particular site.

http://www.accesswizards.com/SecDetails.html This is the "read me" information about the security add-in.

View 1 Replies View Related

Workgroup Security - Bothers My Deployment

Jul 19, 2006

I've designed an access ade file (based on sql server) and distributed it at the network.

Somebody else has made another database (mdb) and placed the users in a access workgroup file by placing their windows logons into the workgroup file. These users happen to be the same users accessing my application. The following thing is happening : "when the users open my database they are prompted their user names and password of the workgroup file'.

I placed an empty database and the same thing is happening, the workgroup security is active alongside every database deployed to this specific user group.

How can I easily 'tell my database' it shouldn't make use of the workgroup security?

(It's odd that an ade which isn't able to use workgroup security prompts users by using workgroup security)

View 2 Replies View Related

General Workgroup Security Question

Dec 26, 2006

Hello,

I cant seem to get a certain setting right. I am trying to setup a user for the database that I have been working on. It keeps saying the following:

"It says I do not have necessary permissions to open. Have the system admin. Or person who created the object establish appropriate permissions for you."

I have that person assigned to the following:

Full Permissions
Full Data Users
Updated Data Users

And they still are unable to open the database.

Now from what I have read on this forum, I shouldn't give any personal permissions. So I have assigned users to groups and given the groups permissions.

In regards to the security question, what are bare minimums for a user to open the database, use the switchboard, choose a form, enter/change data via the form, and view reports.

I dont know the difference between:

Open/Run
Read Design
Modify Design
Administer

And I am afraid to give more than what I need, and I feel like I am just guessing and hoping to set it right. Thanks for any direction in this area.

View 4 Replies View Related

Remove Workgroup / Security Permissions?

Jun 22, 2007

Hi,

I've created a duplicate of our database in order to be able to work on the design of it from several locations. At present the database which is being used has been split into FE (on local machines) & BE (on server), with a .mdw file for the workgroup settings.

For the duplicate I have created a new database with all the Tables, Queries, Reports, Forms, Macros and code copied from the FE & BE files into a single file. My question is, to be able to work on this from remote machines / pass it on to others to work on the design, do I need to have a copy of the MDW present with the duplicate, or is it possible to remove the workgroup and security permission settings?

View 3 Replies View Related

Workgroup Security Cancelled If Mdw File Is Deleted

Mar 14, 2007

Hello people of access world forums. I've decided to design a simple access db with 2003 version but with 2000 compatibility and everything appear to work ok.

After designing and testing the db, I have set the Jet user-level security options as described in some documentation and set the startup options too for a "clean type" start. Everything is ok: I have created the workgroup in a new .mdw file, joined the workgroup, set the users, set the groups, protect the forms I wanted to. If I try to open the db, it asks for user and password and the db works as espected about security.

But if I delete, move or change the .mdw filename, the db turns accesible without the implemented security. Only the startup option works but no user is prompted and the protected items turns unprotected.

I would like to know how can I associate the .mdw to the .mdb so I can't access the .mdb if the .mdw file is not present (i.e. copying the .mdb to another computer or something).

Thanks in advanced.

Kish

View 8 Replies View Related

Access 2003 Workgroup Security On A Network

Oct 5, 2007

Ok.. I have done this before at another job, but this network (or stupid me) is giving me trouble. I'm trying to setup a database security (login/password) for a database on a network. I setup the security levels..setup a seperate workgroup... From my computer it logins fine with the correct workgroup.

I setup a link:

"G:Maximizer DatabaseMaximizer.mdb" /wrkgrp "G:Maximizer Databasemaxsecurity.mdw"

Under my network login it pops up with the correct login/password prompt.

On others, it goes into the database under "READ ONLY" but gives them access to the database in read only. It should using that workgroup.

Any suggestions?

View 6 Replies View Related

Forms :: How To Apply Workgroup Security Level In Access 2007

Oct 1, 2013

The purpose of this project is to aim the security mechanism an allow and restrict of individuals or group of individuals of the database. Define the security accounts and groups of users allowed to access.

Users: Can view / add / edit of data into the database.

Superintendent: Has view access to database but is limited only to their section.

Manager: Has full access to database but is limited to their section.

Administrator: Acts as the overall administrator for the database. Has full control over all data and objects contained in the database.

Most likely the closest example of this database is annual leave application. If individuals is/are adding data and only his immediate Superintendent can view with limited to his group and the same with the Manager as we have four (4) sections (Finance; Procurement; Services; & Management) in one unified department.

View 2 Replies View Related

Advice For Security & Question On Built In Access Security

Mar 26, 2007

I've read and gone though quite a few of the scrips and examples for creating logins and security and i'm getting to the stage when i need to have good understanding of the different methods.

Some of the examples whilst create a user login do not really allow for security within the database whilst the build in security wizard would appear to offer that functionality.

I am thinking that I will use the Workgroup file and that method. My question is am i able to utilise the fact that if a person 'AdamA' logs onto the database which is built into the workgroup security file. am I then able to take 'AdamA' to populate a table which records actions by a user? (I can't seem to find any thread or book reference to doing this)

View 4 Replies View Related

Workgroup

Oct 31, 2006

Hi there,

I'm trying to put in place a workgroup and I'm struggling with it at the moment. I created a seperate workgroup and have a command line short cut to it. When I try to add a user to the admin group permissions it works fine except that I can't open any of the forms in design mode. It says I do not have exclusive rights . I dont know what to do. I though that the admin password would be set to blank but It won't open the database either.

Any ideas, im pulling me hair out.

View 6 Replies View Related

How To Get The Username From Workgroup?

May 18, 2006

I have the security set via the Access workgroups for both groups and users. I want to be able to use the username entered on the logon screen to filter my query results.

How can I get the logon id that was entered when my switchboard form opens?

Thanks in advance.

Dennis Cronin

View 3 Replies View Related

Workgroup Problem

Jun 5, 2006

I currently have several Access 2003 databases on my computer. I have been working on a new one that must be secured.I have created a new .mdw file to handle this. The path to this file is included in the shortcut. Everthing works great.

HOWEVER:

Whenever I close this database and then open another, it is still promting me for a password (the other DBs aren't supposed to be secure). I have changed the shortcuts to go through the old system.mdw but it still does it. When I change the workgroup manually, the secure database no longer prompts me for a password. It would appear there is more to selecting the workgroup than just editing the shortcut.

View 1 Replies View Related

Workgroup File Lost

Sep 21, 2005

We have an old Access 97 database with a workgroup file. The problem was that the machine was upgraded and the software was changed to XP. They support guys moved all files to the new PC except the the workgroup file. We can't fine a backup of the w/g file.

I am unable to upgrade the database to access 2002 because of the permissions.

What is the easiest way to get past this stumble block.

Thx

View 2 Replies View Related

MS Access- Workgroup Files

Jul 18, 2006

We are running two versions of Access (97 and 2003) on some of our machines. We recently set up a new workgroup file, but it seems that on the machines that have the two versions of Access the workgroup file reverts back to the old setting everytime the user logs in again.
What do we need to do to prevent the workgroup file from switching back?

Thanks

View 2 Replies View Related

Join Workgroup Using A Zip File

Jul 27, 2006

Present
Go to user computer, and then manually to join the workgroup.


Is this possible?

Send email to new user.
Join workgroup using a zip file. When file is un-zip the user automatically joins the workgroup and places a short cut on there desktop.


Not asking for to much, you think.

View 2 Replies View Related

Lost Workgroup File

Oct 5, 2006

Hi,

I setup user-level security on the database. the workgroup file was deleted by somebody.

How can I open the database?

Because I create the same name for workgroup group file and input the same WID. It did not restore the original one I lost.

Right now, the database cannot be opened.

Please let me know how to solve.

Thanks.

View 1 Replies View Related

Forgotten Workgroup Password

Aug 4, 2007

help,
i have forgoten my workgroup password, can anyone recomend some free software that will allow me to recover the password.

thanks

View 5 Replies View Related

Specifying A Workgroup File To Use From A Shortcut

Jan 9, 2008

Hey all,

I was wondering if any of you guys know how to specify a custom workgroup file in a shortcut to my database.

This is what I've got in my shortcut:

C:TESTTEST.mdb /w "C:TESTSECURITYFILE.MDW"

Basically I want access's system.mdw to remain the default mdw for access but want my mdb to use a different mdw.

Many thanks!

View 5 Replies View Related

How To Link Tables That Are Not In The Same Workgroup

Feb 6, 2006

I would like to link to a table that is not in the same workgroup as the database I am working in.
Both databases are from different departments - I only want read rights to the linked table to run queries against some data in my database. I have access to the database I am trying to link to - but have not been able to figure out a way to do this?

View 3 Replies View Related

Identifying User's Workgroup

Mar 13, 2007

Is there any function or code that would display the workgroup in which the current user belongs simular to the function "currentuser()" which displays the user logged onto the db?

View 9 Replies View Related

Using Copy Of Existing Workgroup File On A New Db?

Jun 17, 2005

Hi all,

I've set up security on my database before with great success, and now I'd like to use the same workgroup file (a copy with a new name and location) to secure a nes db.

I open the new db, and join my earlier created mdw file. I'm prompted with that I have joined my workgroupfile.

I then set permissions for each user in the workgroupfile, remove admin rights for the admin user account, and assign admin rights to my own account. I am also the owner of thr db.

I now run the security wizard, and I make no changes to any checkboxes.

This goes nicely, and the wizard closes after making a backup file.

I now want to re-join the system.mdw file, so I don't get prompted with the logon dialog when opening a new db or an unsecured db.

If I now try to start my new secured db by double-clicking on the secured mdb file it opens ?????

Where am I going wrong?

Thanks in advance for any help.

View 6 Replies View Related

Workgroup File In MS Access 2003

Jun 29, 2005

I created a Workgroup file (Project.mdw), assigned different Permissions to different Groups, and put different Users in appropriate Groups.
The above setup is working fine and just as required. But, if I remove or rename the Workgroup file, MS Access does not look for it, creates in its own Workgroup file and starts just as usual - without asking for the Password, or caring about the Permissions and/or restrictions set.
How can I make the database file bound to the MDW file, so that it does not open without it.

View 5 Replies View Related

Assigning Workgroup To Just One Database File ?

Jul 26, 2005

Hi,

I am trying to setup User Level Security around a Purchase Order Database that I created. Using the Wizard I was able to setup different users with different permissions.

However, as I found out the hard way (but I did recover it), 'joining' a PC to a my new security workgroup forces all Access databases on the PC to use this.

Is there a way to force just this one Access .mdb file to use the newly created PO Workgroup security file ?

I am aware of setting up a shortcut to point to thesecured db. Ie: "C:Program FilesMicrosoft OfficeOfficemsaccess.exe" /wrkgrp "C:PO FormsMyWorkgroupFile.mdw" "C:PO FormsMyDB.mdb" /user

But despite the above shortcut, couldn't users just find out where it points to (by looking at the Properties of the shortcut), and open the .mdb file based on that ?

Thanks !

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved