Basically, if Calendar date > Date(), if Calendar Date not Saturday or Sunday, weekday(Calendar date<>1 and <>7), AND Calendar Date not in (Holidays table).Then repeat the last not = 0 value of MyValue. I thought of changing the default value but the value is already 0, while default is null + I need to set the default value under certain conditions.
Beginner with Access 2010 - making additions to one field in a JunctionTable. Need to extend a field by adding some new numbers but have found it easier to Export to Excel - make changes and replace in accdb.
I have found an Excel formula that does what I want but starts from the number "1".
=INT((ROW()-1)/9)+1
Which starts with number "1" and repeats this 8 times then increments by one and repeats 8 times.
But I want to start with a number of choice (7270 and go to 9028). Have seen some VBA versions but none give me control of the start number. I am then able to update the second empty field on the JunctionTable from a query. (this is a fixed number).
I have a macro that needs to run repeatedly until the number of records in a query =0 but I can't seem to get the Repeat Expression set properly.
My query is called sqMatchCount:
SELECT Count(sqCompare_Parts_Matched_1st.BRP_Entry_Num) AS MatchCount FROM sqCompare_Parts_Matched_1st;
The theory is if I don't have any more matches then I do not want the macro to run any more. In other words, MatchCount will = 0 when there are no more matches.
I have tried a variety of syntax using DCount in the Repeat Expression:
=DCount("*","sqMatchCount") ...... Macro runs in a continuous loop DCount("*","sqMatchCount")=0 ...... Macro does not run (although I thought a couple times it actually DID run with this syntax) DCount("MatchCount","sqMatchCount")=0 ...... Macro does not run =DCount("MatchCount","sqMatchCount")=0 ....... Macro does not run =DCount("MatchCount","sqMatchCount") ....... Macro runs in a continuous loop
What IS the proper way to write this Repeat Expression for the RunMacro Action if I want it to run as long as sqMatchCount.MatchCount>0?
I have a table in Access that I have a form saving new records to. Before this save occurs, I would like Access to check if the account number already exists and if the account does exist if it is outstanding. If both of those conditions are met I would like a message box to display and cancel the save as it is a duplicate. I can't seem to get it to work though.
I was thinking to use a filtered recordset based on one of the conditions and then perform a find on that recordset to see if it is null.
Code:
dim acct as long dim rstfiltered as DAO.Recordset Set rstfiltered = CurrentDb.OpenRecordset("SELECT * FROM tblclstrack WHERE [Request Status] <> 'Completed'") acct = Me.cd_number.Value
I have a module that is in Excel that is connecting to a back end database. I am trying to pull data from a table that meets a number of conditions. With the following statement, it is not returning any records,even though I know there are records that meet all of the conditions. I suspect the problem is with the last condition. In that condition I am trying to say that pull in records where it has been at least 14 days since the last review.
Code: strSQL = "SELECT tblsojrol_oc.* FROM tblsojrol_oc WHERE tblsojrol_oc.[Status] = 'Pending' AND tblsojrol_oc.[1st Review Date] IS NOT NULL AND " _ & "tblsojrol_oc.[3rd Review Date] IS NULL AND (DateADD(Day,14,tblsojrol_oc.[2nd Review Date])) >= #" & dt & "#;" objRs.Open strSQL, objConn, adLockReadOnly
I'm using Access 2003 to input patient records. I did not set up the database and have limited knowlege of the workings of Access.
My problem:
Normally to repeat a field from the previous record I would use the c>' keys in a blank field and it would be filled with the info that I typed on the preivious record.
However all of a sudden it does not repeat the privious field but one from several years ago.
All I have a form called frmMain. This form contains a TabControl named tabMain tabMain has some pages. One of the pages is called pagRecords pagRecords contains a subform called frmRecords. frmRecords contains records from an in-memory table.
My problem: If I select tab pagRecords the cursor is set to the last record.
What I want: as soon I select tab pagRecords, the record cursor must always be set to the first record.
I think this can be done with next code.
Code:
DoCmd.GoToRecord acActiveDataObject, , acFirst
However, I placed this line in a lot of event properties but it is never triggered (I put a break on the line).
So on which object and event should I put this line? (and is acActiveDataObject the right parameter?)
I have an employee and asset database. If an employee gets fired, I need remove them from the general employee records, but I want to save a record of that employee. Is there a way to delete an employee from one table and have it automatically added to another table?
Say i have two tables 1 = computers (it holds info about the computers) 2 = Repair (this table holds only the PCs that are under repair)
I want to be able to move one computer record to Repairs table as soon as i select that "this pc is under repair" on a form. So it does not show up on my report of computers in hand and shows up on computers in repair.
and when i get the pc back from repair, i want to be able to select "back in stock" and it'll move the record back to Computers tables & removes tht record from repairs table
is there a way i can do this automatically (without manually move a record)?
Any suggestions - web links or examples will be much appreciated.
Using access 2003, i would like to add a button to a form so that when clicked all the data in that record is moved (cut and paste) to another identical table, like archive.
Is there a way to duplicate, triplicate, a record based on an option group selection. i.e.
Form Field: Option group Value = 1 Value = 2 Value = 3 Field 2: Field 3: Field 4: and so on.
Basically if value 1 is selected, then I fill out the rest of the fields hit enter and go to a new record. But if value 2 or 3 is selected, I fill out the the fields, hit enter. The information is recorded said number of times based on the selection in the option group. Ideally I would have2 or 3 of the same record in the db, with different Primary keys of course.
my database just records end of day sales figures which are entered though a form, after they are entered the total for the day is archived. However the problem i have is that the i need some way of clearing the input table with a command in the form.
I am trying to edit an existing record in my database.It goes to the correct record to update but will not update if "RecordUpdate" is specified as auto numbered.If the "RecordUpdate" is just specified as a number in the query it is fine.
I am trying to delete a record from a table and when I pass the variable as a text value it works but when I pass as a number I am getting a mismatch error.
I have to use it as a number as I am doing other update code in my database and it is a number.
Code: DoCmd.RunSQL "DELETE * FROM TblIssueData Where tblIssueData.SerNum = ' & Me.txtserNum & ';"
When I am using TblIssueData SerNum as a text variable in table it works but when I specify SerNum as a number in the table it gives me data mismatch error. I have to leave it as a number for other VBA code in my database. I believe it is just a syntax error but not sure where to go with it.
Hello, I have a DB table that only has 12 rows that is continuosly edited throught out the day. What I need to do is log all changes made to the 12 rows throught out the day. I have built two queries (a without match and an append query) which compair the source table with the log table where I store the differences. This works fine but I have to manually trigger the query. I would like to run the query about every 3-4 minutes. Is this possible or is there a better way?
In my office we have used Access 2002 for many years. We enter data directly into a table. Many values are repeated row after row, with only slight changes in a few fields. I am looking for a way to automatically have the previous value in a field entered into the current row, and allow this value to be modified if it has changed, but then become the new "default" value for following rows. I have searched the web and found solutions when using forms, but nothing for entering data directly into a table. I have also seen the suggestion for Ctrl + ', this works but I would rather it be done automatically.
I'm trying to create an If/Then statement that needs to match to multiple values. My initial thoughts were to create a list but that doesn't seem to work the way I thought it would.
For example: If Me.Field = 1,2,5, or 8 Then Do 'X' Else IF Me.Field = 3,4,6 or 7 THen Do 'Y' Else Do 'Z'
I haven't been able to get the syntax to work right. I'd rather not have to do 'Me.Field = 1 or Me.Field = 2, etc.' but if that's the only way to have it work right, then I guess it'll have to do.
I am trying to achieve the following - I want to query a table to see if a record exists with a particular field blank. If so, I would like to prompt the user for data.
In real world terms, when assigning an item to a user I would like to first make sure that the item is not already assigned to somebody else. I have 4 fields, UserName, Item, IssueFrom, IssueTo. So when an item is assigned to a user, the first 3 fields are populated and the IssueTo remains blank, until that item is assigned to somebody else.
At the minute I have nothing in place to prevent a user from assigning the same item to multiple users and having multiple records for the same item in the table.
Hi, all... welcome back to the new Access World Forums... glad we're still operational, even if some data was lost. It's the minds, anyway, not the data...
I have a query that pulls from 3 transaction tables.
tblTransactions - lists purchaser, amt tendered, other details tblPurchased_Items - lists products and services paid for tblTherapy_Treatments - lists treatments paid for
(Note: these are not separate lists of available items. They're two subforms' tables, one that deals with insurance and one that doesn't.)
I can pull this data fine, but in a case where someone had 1 treatment, but purchased 2 products, the query lists the treatment twice. I do have unique IDs for each table's items, but am not sure how to "list" each transaction once, but each thing paid for once, also.
For example: Joe Blow comes in and has physical therapy and buys 2 books.
My query will show (bogus fields for illustration purposes): TransactionID Name TherapyID TherapyCost ProductID ProductCost 33 Joe Blow 10 180.00 15 12.00 33 Joe Blow 10 180.00 17 19.00
So, if I total TherapyCost it really gives me twice the correct amount.
Can someone point me to a solution? Pardon my rank ignorance, yet again.
Phone No......Bill Date.......Amount _____________________________ 222000........12-02-07.......5689/- Null value.....12-04-07.......2356/- 223223........12-03-07........568/- Null value.....12-05-07.......1256/- 224224........12-01-07.........568/- 225225........12-07-07.........125/- Now my requirement is like this:- ''if any field contains null value then repeat the previous value otherwise keep the original value''. Could anyone solve this problem either by query or macro for access 2003?
I'd like to expand me tree view automatically when a node matches a string variable from a table. In other words, when a node in a tree matches the given name (variable), the tree will expand all the way down to that name. I guess I need to use "For each node" and when the node and variable match, the tree structure will show up.
I have come up with something like this:
Code: For Each nd In Me.tree.Nodes If nd = level1 Then nd.Child.EnsureVisible Exit For End If Next nd Me.tree.SetFocus
But this only shows the first level of my tree ( btw. I have a 3 level tree). I get lost inside the FOR when I want to make use of another two variables - level2 and level 3
I have a Customer Issue form that writes the following into one table named Table1: Date, Customer Name, Ticket number, Agent, Issue and Comments. This is very simple.
All of this is filled in from a form that has links to 3 other tables for drop downs; Customer Name, Agents, Issues. This is working perfectly.
What I want to be able to do is generate a report based on a date range for a particular agent. Say 9/1/2013 - 9/30/2013 for John Doe.
For the report portion, on the form I have to combo boxes, one for start date, one for end date. I also have a drop down for selecting the agent. When I click a button on the form named Report, It will generate a preview of the report.
Here is the problem. I can get this to generate a report based either on the date range, which gives me all of the agents, or by agent, which gives me all of the dates. I can't get it to do both.
Here is some code that I have on the Report button:
DoCmd.OpenReport "AIReport3", acViewPreview, , "[Agent]=" & Me.Agent This is the code that will let me choose the agent, but gives me all dates.
If I change this code to this: DoCmd.OpenReport "AIReport3", acViewPreview, , "[DateRptd] Between #" & Me.cboFrom & "# And #" & Me.cboTo & "#" It will display all issues in the date range, but gives me all agents.
I was thinking I should be able to combine them with an AND or an & to get it to use both the agent and date fields, but I can't get this to work.
Something like: DoCmd.OpenReport "AIReport3", acViewPreview, , "[Agent]=" & Me.Agent And "[DateRptd] Between #" & Me.cboFrom & "# And #" & Me.cboTo & "#"
