I have a button which runs a list of queries that take roughly 10 seconds to run, when another user clicks the button while the other one is running it gives and error message 3405, File already in use.
View RepliesIs it possible in access, to create a button that will copy a file to a new directory? Specifically, the data field in question is an access hyperlink that we can click on to open a PDF drawing of a part. I just want to copy the file the hyperlink points to, into a new directory.
EX:
X:database/drawings/somefile.pdf
X:erp/drawings/somefile.pdf
I don't think a macro can do this, but perhaps vbscript can.
Basically im trying to setup a click button that will export my query as a text file ( the text file will then be fixed width and i have already setup the specifications for this).
I think i get how to complete the export part as below
OutFilePath = "file location i want the data to be exported to"
DoCmd.TransferText acExportFixed, "Welcome output query Export Specification", WelcomeOutput, OutFilePath, True
I just dont know how to run the query and link it to the export.
On double click event in the listbox, code as below:
Code:
Private Sub ListBox_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmTransactions"
stLinkCriteria = "[BinNumber] =" & Me![ListBox]
DoCmd.OpenForm stDocName, , , stLinkCriteria
End Sub
When I double click any row then it show Run time error 3464.
Getting error '2450' when click Access close button to exit.
Run-time error '2450': ECN cannot find the referenced form 'frmLogin'.
Note: After login my login form is visible to, cause to get login user id into "frmECN" Form. But When I'm in "frmECN" Form and enter data then close to exit Access main close button I'm getting 2450 error.
I am trying to create a txt file to import into our accounting software. I get the file (its blank), but it fails on the WriteLine and i get the run time error. I have a command button on a form that the user will click to export the file.
Private Sub cmdExport_Click()
Dim cnn As New ADODB.Connection
Dim rst As New ADODB.Recordset
Dim strPath As String
Dim strPathGB As String
[Code] ....
I have been playing with the sample DB alastair69 donated in the sample db section of the site. "The nice timer function".
If you don’t start the timer right away you don’t have the correct time.
I haven’t figured out how to add a reset type of button to display the most current time in the start time field. Can any one help me out please?
I try to run a function off of a button click.
The code is
Private Sub Command_Click()
Run fuctionname()
End Sub
The code is ran, but then I get a msg box : Run-time error '2517':
Microsoft Office Access can't find the procedure '.'
I am required to write a code that will allow me to generate a table at the click of a button. Is there such a thing?
The table name should be Table1, and it contains 7 columns.
First column: Auto number (PK)
Field1: Memo
Field2: Memo
Field3: Memo
Field4: Memo
Field5: Memo
Field6: Memo
the login is working perfectly, once It logs in there is a button to expand all that is based in JS. I can't seem to work out how to get it to click the button to expand the whole menu, latest code is below:
Code:
Option Explicit
Function Checkpage()
Dim IE As Object
Dim lform As Object
Dim Document As Object
Dim item As Object
[code]...
I want to run multiple SQL commands on click of a button. I have these three command,
CurrentDb.Execute "INSERT INTO UserMadeDeviceT(Product, ORESector) " & _
" VALUES ('" & Me.D_NewDeviceTxt & "', '" & Me.D_ORECmb & "')"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (RatedKilowattPower, KilogramWeight)" & _
" SELECT RatedKilowattPower, Weight FROM UserSelectedComponentT " & _
" WHERE [TotalComponent] = '" & D_ComponentNameCmb & "'"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (Cost) SELECT SUM (EuroCost) FROM UserSelectedComponentT"
all of these work indevidually and return the correct value but the add three rows to the table. How can I combine these three commands into one so that it will only add one entry?
I have created a button that works fine however it will only work one click per form load and i cant seem to figure out why.
Code:
Private Sub BntExpired_Click()
Dim QryAllCourses As recordset
Do Until ExpiryDate > Date Or ExpiryDate = ""
MsgBox ([FirstName].Value + " " + [SecondName].Value + "'s course in " + [CourseName].Value + " has expired")
recordset.MoveNext
Loop
Exit_BntExpired_Click:
Exit Sub
Err_BntExpired_Click:
MsgBox Err.Description
Resume Exit_BntExpired_Click
End Sub
I have a textbox with about 400 characters, I also have 5 textboxes next to it. I want to click a button and I want to transfer the characters to the other textboxes 208 characters at a time.
View 3 Replies View RelatedI would like to make an append query to piece together multiple tables into a holding table, once the command button is clicked.
a) how to make an append query in vba,
b) How to call an append query on click of a command button?
From formA I click on button cmdFormB and I open FormB. From formB I click on button cmdFormC to open formC.
Is there a way to open forms formB and formC by clicking on a button on formA?
I have a table EmployeeInfo containing three fields
EmployeeId
Name
FatherName
I have created form for this table.
I do not want to use autonumber for employeeid for some reasons. I want to place a button along employeeid test box on form.
User will click on the button it will get max employee id from employeeinfo table and add 1 and copy it into employee id text box.
What will be the code for button click event.
Code:
ExportWindow = FindWindow(vbNullString, "Output To")
OkButtonTest = FindWindowEx(ExportWindow, ByVal 0&, "DUIViewWndClassName", vbNullString)
ButtonOKTest = FindWindowEx(ExportWindow, ByVal 0&, "Button", "OK")
mouse_event MOUSEEVENTF_LEFTDOWN, 0, 0, 0, 0
mouse_event MOUSEEVENTF_LEFTUP, 0, 0, 0, 0
The above code works and my issue is how can I move the mouse to the OK button and click on it to. The reason why is when I SETTEXT to the address bar it does not refresh so I SETTEXT to the file name box to navigate to the prescribe address which will refresh the navigation bar once the OK button is clicked. How to refreshing the navigation bar.
I have a mainform with a combobox and a button. What i want is when i click on the combobox and then on the button I want that the textbox in the subform automatically fill in.
The mainform name is FrmTakenInvoerenEnToewijzenAanEenMonteur,
The combobox name is Keuzelijst1,
The subform name is SubTakenInvoeren,
And the textbox name is txtOpdrachtnr.
I tried this code in on button click:
Me.SubTakenInvoeren.txtOpdrachtnr = Me.Keuzelijst1
But that doesn't work.
I have access table that stores details as attached. Just to give an example how data is stored , I copied data from Access table to excelsheet. Now I would like to create a report that will run when a button is clicked on the form and the vba code should display the last 7 dates from todays dates in the report along with all the data and colour the record Green,Amber and Red depending upon the Update Date and Target Date. If the Target date exceeds then that records should be coloured "Red" and if todays date equals to Date then the record should be amber and if greater than Date but less than Target Date then it should be Green.
So the report should display the last 7 dates records from todays date and the appropriate color of each record to let everyone know if its under target, meets target etc.
I'm new to Access and I'm using Access 2010.
I would like to be able to click a button on a form in my data base and login to a website using my username and password.
The manual login, requires two clicks after username and password, "Login" and "Click to continue"
I have tried many solutions found on the internet, none work for me. One forum reply was to send me a link to another site and it was for Excel. Is the code the same? Didn't work anyway.
From the website I want to login to, I have copied the code into a Word doc from the "inspect element" to work out the names of the fields I'm trying to put my username and password into. (see attached)
I would also like to be able to use Google Chrome as my web browser if possible?
I am attempting to create a form (Access 2013) that will include buttons to open the hyperlink menu to add a hyperlink into a table. It works if you click "Ok" without issue, however, if you click "Cancel" or click on the "X" I get a "Run-time error '2501' - The RunCommand action was cancelled". This is obviously referring to the RunCommand in the VBA code. The code does not reference the cancel or close option of the hyperlink editing box. I don't know how to correct this error.
Code:
Private Sub Command9_Click()
Me.[Hyperlink].SetFocus
DoCmd.RunCommand acCmdInsertHyperlink
Command9_Click_Exit:
Exit Sub
[code]....
Also, is there a way to get the hyperlink to populate as the full network path and not the drive letter?
Hi
I am running Access 2000 with MDAC 2.8 and SQL Server 2000 database. I have linked the tables of the database in Access. The problem is that it would not allow me to insert/update/delete but only to select from the database.
Here is the code:
Dim strSQL As String
Dim con As ADODB.Connection
Dim cmd As ADODB.Command
Set con = CurrentProject.Connection
Set cmd = New ADODB.Command
Set cmd.ActiveConnection = con
strSQL = " INSERT INTO dbo.crop_demand_yearly (" & _
"geo_id, crop, area, water_value, water_use, date_from, date_to)" & _
" VALUES("
strSQL = strSQL & ((Val(Me.txt_borenid))) & "," & (Val(Me.cbo_crop)) & "," & (Me.txt_area) & "," & (Me.txt_use) & "," & (Me.txt_value) & ",'" & Format(Me.txt_datefrom, "dd/MM/yyyy") & "','" & Format(Me.txt_dateto, "dd/MM/yyyy") & "')"
cmd.CommandText = strSQL
cmd.Execute strSQL
con.Close
Set cmd = Nothing
Set con = Nothing
I dont understand what is the problem! Please help
I have created a form that is bound to a table.
There is a button on the form that allows users to send email with the form as an attachment in pdf. I'd like to create a date/time stamp in another table called tblLog. Trouble is the code works uptil sending emails but it doesn't record the stamp.
Heres what I've done so far.
Private Sub cmdEmail_Amd_Click()
On Error GoTo cmdEmail_Amd_Click_Err
DoCmd.OpenForm "frmAmendment_Master", , , "[Record_ID]=" & Me.Record_ID.Value
DoCmd.SendObject acForm, "frmAmendment_Master", "PDFFormat(*.pdf)", "", "", "", "Amendment Form" & " " & Surname & " " & Firstname, "", True, ""
[Code] .....
I have a database that had some code that enabled the user to click a button and it would take information from one Access query or table and paste it into specific locations in Excel. This is important because the last worksheet has specific formatting in place.
If it didn't, I'd just use the transfer spreadsheet option and not even bother opening Excel at all with code.
I've got it working well except for the last part. The last query being copied has eight records and only one is being sent to Excel. Same code as the other queries where all of their data is going to the right spot in Excel with the right number of records.
Private Sub AM_Top_25_Click()
DoCmd.SetWarnings False
DoCmd.OpenQuery "delete_ShortPartItems", acNormal, acEdit
DoCmd.OpenQuery "append_to_Short_Part_Items", acNormal, acEdit
[Code] .....
In the Main Form , I have few buttons and I am writing the following code to open the right form when a button is clicked but unfortunately the code isn't doing anything. No form is opening. I am using MS office 2010.
Code:
Private Sub BtnOption_Click()
DoCmd.OpenForm "Form1", acNormal, , , acFormAdd, acDialog
End Sub
Private Sub Form_Load()
'Me!Label1.Caption = "Welcome " & Environ("username") & "!"
[code]....
Often I use Labels as buttons due to the fact I can colour them the way I want, and use the on click event to trigger code.
The code below however works for a command button, but not a label button.
DoCmd.OpenForm "frmdatetime"
Do While Forms!frmdatetime!OKFlag.Caption = "False"
DoEvents
Loop
When this code is run by clicking on a command button, it works fine.
If run by clicking on a label, frmdatetime opens, but the mouse will not work on either of the 2 open forms unless you go down to the windows task bar, jump onto another window, and back onto frmdatetime.
If I remove the loop with the DoEvents in it, then the problem does not occur.
Can anyone enlighten me as to why this behaviour occurs.
Thanks
Richard