I am attempting to create a form (Access 2013) that will include buttons to open the hyperlink menu to add a hyperlink into a table. It works if you click "Ok" without issue, however, if you click "Cancel" or click on the "X" I get a "Run-time error '2501' - The RunCommand action was cancelled". This is obviously referring to the RunCommand in the VBA code. The code does not reference the cancel or close option of the hyperlink editing box. I don't know how to correct this error.
Code:
Private Sub Command9_Click()
Me.[Hyperlink].SetFocus
DoCmd.RunCommand acCmdInsertHyperlink
Command9_Click_Exit:
Exit Sub
[code]....
Also, is there a way to get the hyperlink to populate as the full network path and not the drive letter?
I am having a problem with Hyperlink in a form when I click it tells me Run time error Microsoft access cannot follow hyperlink. Each records has its own link for specific file. If I click the link in the table it opens with no problem but in the form I get the error message to debug or end if I hit End it open the link.
Looked at the form - on click event procedures my command is
I created a table about films and i made a form so i can see each movie in a different record. I wanted to create a button which generates a link to the movie's internet website. But when i create a button i cant put a different hyperlink for each record of the form.
My idea is the button to have a logo of the site so that is why i cant just put a link in a text box. I also tried embedding a hyperlink to a picture but again i had the same problem.. there was only one hyperlink for all the records .
.I'm trying to pass a field ([txtUPRN]) in a form to a hyperlink or button on the form.
e.g. [URL]
I thought I could add a hyperlink and simply change the part 'jlocation = 26800' to 'jlocation = Me![txtUPRN]' but this would be too easy as it doesn't work. THe URL still opens a web page but displays no data. Do I have to be more explicit as to what I'm passing in i.e. use the full form name or am I going about this the wrong way?
I have a button which runs a list of queries that take roughly 10 seconds to run, when another user clicks the button while the other one is running it gives and error message 3405, File already in use.
I have a form thats already created. I would like to put a box or something next to a button so I can monitor when the last time the button was pushed. Ive seen it somewhere before and never took a moment or a need to see how it was put together.
I have a button that, when clicked upon, I would like to hyperlink to one folder--the location of which being specified by a value the user selects from a combobox.
Example of what I would like to happen: 1)The user selects the Ship Name "AGER 2-Pueblo" from the combobox list. 2)The user clicks the "Go To Ship Folder" button to go to this ship's folder. 3)Access takes "AGER 2-Pueblo" from the combobox and tacks it on the end of the general address of "C:Documents and SettingsDesktopShip Stuff" so that the folder "C:Documents and SettingsDesktopShip StuffAGER 2-Pueblo" opens.
I tried searching for this...but found nothing except the application.followhyperlink code, which I can't get to do this. Can this be done? I would appreciate any help.
I am embedding a MS Access 2003 Database form into web page (iframe) by creating a "Data Access" form.
I have created it all and it works fine. But there is one last thing i need to sort out.
When the user clicks the Submit button (Really a Save Record Button), i would like the button to also forward the visitor to a basic "Thank You" html page, in the actual iframe. At the moment the record saves, but it doesn't give the visitor any acknowledgement that they submitted successfully.
What code do i need to add to the <Button> code on the Data Access form, in order to create a hyperlink. I am not too familiar with VB.
Ok I have a Continuous form that in one of it's fields contains Hyperlinks. The form is named [Song Info] and the field is [Play]. I want this field to be hidden and have a command button open up the hyperlink in that recordset. I think that all the info need but if not let me know.
The following code is in the Form Current. As you can see if BranchCode = 2 I want to do a DLookup on the SystemPreferences table that holds a number Branch fields that hold document archive numbers for that branch. I want to move the number in the CroArchiveNo field into the field ArchiveNumber. I then run an Update Query on the system preferences table to add one to the relative branch archive number.
If Me.[BranchCode] = 2 Then Me.[ArchiveNumber] = DLookup("[CroArchiveNo]", "SystemPreferences", "[SysPrefId] = 1") DoCmd.SetWarnings False DoCmd.OpenQuery "UpdateCroArchiveNo" DoCmd.SetWarnings True End If
My problem is that I get an error
Run Time error 2448 You can't assign a value to this object
What's the best way to trap the error I get when I don't input the time correctly in a date/time control?? I have a the following as an input mask: 99:00 >LL;0;_...02:30 PM
ok, I have links to documents(reportLink) stored as type text in a table (Investigations). Each link is different per record.
I have a form that display information from this table. The field that holds the hyperlink is called reportLink on the form. On this form I would like to have a button that when clicked will open up the [reportLink] for that particular record. so this button will point to a different file each time the record is changed.
I have stumbled around this site and think I have to put the Application.FollowHyperlink code in the OnClick event for this button. However, I am clearly not doing it right as it isnt working. what is wrong with this:
Private Sub Command34_Click() Application.FollowHyperlink Me.[ReportLink]
I am trying to create a button that opens up a webpage. I get how to create a hyperlink on a button. The problem is, I need to open a specific page depending on the information in a text box.
The text box displays the tracking number for the current record. That number is populated automatically via a control source. The problem is that I need to open different web pages depending on the tracking number displayed. For example, UPS has a specific start to their number (1ZX....). Other trucking companies have a specific format, also.
So how do I tell it to look at the tracking number and then open the corresponding web page?
I have a field in a Table (tblMainFile) named "File Location" which contains a hyperlink for each of the files.I have a continuous form (from a query) which displays information from the tblMainFile table.the form shows a text box (with the hyperlink) which is clickable to take them to the link location.I would like to have a button which says (GET FILE) or a different text box which simply says "Get File" as opposed to the entire hyperlink.
Looking to create two command buttons or two keystrokes sets in an Access 2007 form that will allow me to place a current date and time in any allowable field where the Cursor is presently placed. Similar to what was in Access 2000, ctl: (for the current date) and ctl shift : (for the current time).
I was trying from a button on my form that will go to and bring up the desktop. I want it so I can put this database on anyone's computer and the button will work.
I am using this and it works but only on my computer.
Application.FollowHyperlink "C:UsersBryanDesktop"
I also tried this
Application.FollowHyperlink "C:Show Desktop.scf" And Application.FollowHyperlink "C:WINDOWSSystemShow Desktop.scf"
Both gives Runtime error 490 cannot open specified file.
Private Sub Save_Click() If IsNull(cboEmpName) Then MsgBox "Please Select Employee Name" Me.cboEmpName.SetFocus End If If Me.txtNoofDaysWorked.Value = "0" Then MsgBox "Please Enter No of Worked Days"
I have a program that has a "GC" Button that I click on which takes me to a General Contractor Form. It works perfectly unless the Firm has an apostrophe in it's name. For example "D'Agostino". (refer to attached DAgostino1.jpg). When I click on the GC button, I get the attached Syntax error, (Syntax on DAgostiono.jpg).
The third attachment (GC Firm Button Code.jpg) shows the VBC for this button.
I have a routine than has been working perfectly up to now. My save routine was called by clicking a Command Button called cmdAdd.
I tried to change this Command Button to a toggle button by deleting it then creating the toggle button, naming it cmdAdd and clicking on the event property to link it to the existing procedure. PS It is an UnboundForm
BTW, I've done this for several other commands without a problem but with this particular case I get the following error
Run Time Error 2115.
The macro or function set to the Before Update or Validation Rule is preventing Access from saving etc."
It seems likely that I need to do something to the toggle properties.
It allows the docmd.save but still says "You must save the current field before you run the Requery action"
The system is looking to save/update and something is stopping it. Funny though that this doesn't occur with Command Button
I have tried decompiling, compact and repair, commenting out every line that involved updating a field or variable (Except for a recordset operation that does correctly do the updates required)
BTW the Toggle button has no Before or After Update events - Only the On_Click
I have a command button on a Web Mutli-Record form that is using a "= [Report_URL]" value within the Hyperlink Address property. This all seems to work other than the fact that when the link popups up it has a "#" on either side that basically makes it an invalid address. How do I get rid of the # signs to get the web address popup in the URL when a user clicks on the Command Button that is associated to the row the record is on.
I am trying to create some code for a button in a report that will follow a hyperlink to a specific file. The problem I'm having is that the files that are at the end of the hyperlink can have various extensions (*.doc, *.docx, *.pdf, etc.) I'd like to be able to put a wildcard in the code to allow the opening of the file regardless of the extension.
Code so far:
Private Sub Command6_Click() Application.FollowHyperlink ("C:UsersjbeggDocumentsAccessTestFolder" & [FileName] & ".*") End Sub
i have thousands of data records with hyperlinks that are correct. Each data record shows the actual link (google.com, foxnews.com, espn.com, etc.). However, i want to change all of the records to just say "link" instead of saying espn.com, etc. How can i do this automatically without having to manually right click, edit, and changing the text to display?
MS Access 2000 - Quite simply, on a form I have an Email field and I have the "Is Hyperlink" property set to yes. In the On-Click event of this email field I use this single line of code below to open a new outlook (2007) email with the address already entered. Staff will be entering the email address themselves as part of the clients contact details Form.
Code: FollowHyperlink "mailto: " & [Email]
This is all fine, however access also tracks [URL] .... onto the end of the email address and tries to also open a web page which obviously fails.
Is there something somewhere I can tweak that tells access to always only treat the text in this field as an email address, and when clicked open an email?