Queries :: Select Query With Different Values Only
Aug 14, 2015
I Want to Create an Query to Find Different Values in A Table/ Query
Like
Month Year Name School Post
Jan 2012 Ankur School 1 Post 1
Feb 2012 Ankur School 1 Post 1
Mar 2012 Ankur School 2 Post 1
Apr 2012 Ankur School 2 Post 2
May 2012 Ankur School 2 Post 2
June 2012 Ankur School 3 Post 2
Now i want in result of Query is only like
Month Year Name School Post
Jan 2012 Ankur School 1 Post 1 (Starting Ledger)
Mar 2012 Ankur School 2 Post 1 (Change in School)
Apr 2012 Ankur School 2 Post 2 ( Change in Post)
June 2012 Ankur School 3 Post 2 (Change in School)
Let's say Table (T1) has fields F1 and F2. After a massive update to T1, there are some records with F1 = "" because a Dlookup using F2 as criteria to another Table (T2) resulted in a null. I created a select query to show unique T1F2 values where T1F1 = "". The user can use this query to find out which F2 values need to be added to T2.
How do I create an update query that will update T1F1 with values from T2 using the T1F2 results from the select query to again use the Dlookup to T2 (of course after T2 has been updated to contain the missing F2's)?
I am using Access 2010 on a Windows 7 laptop. I need a query to provide a list of ID's that have more than one occurrence of IDandDate combined but haven't been successful getting past syntax errors.
Using this table structure as an example: ID - defined as text field Date - defined as date/time field TestValue
This legacy table contains a record for each test. The table should be unique based on the ID and Date combination but was never restricted to that rule. I am converting to a new table but need to identify the duplicate entries so they can be addressed by business folks.
I'm fairly new to Access. 's various select queries containing useful and useless results. I want to create a select query that will pick out all the useful figures into a 1 row table that can then be pasted into Excel.
e.g Existing Select Query 1 returns 1 row showing Average Age, Average Price, Total rainfall Existing Select Query 2 returns 1 row showing Average Weight, Average Salary, Total snowfall Existing Select Query 3 returns *2* rows: It returns Distance from London, Hours daylight and population for Town A and Town B
I want a select query that returns 1 row showing (6 items):
Total rainfall, Total snowfall, Town A Distance from London, Town A Population, Town B Distance from London, Town B Population.
I've been able to handle getting Total rainfall and Total snowfall. But I cant figure out how to get Town A Distance from London, Town A Population, Town B Distance from London, Town B Population to appear in the same row of the same query results as Total rainfall, Total snowfall.
For the life of me I can't get the Multiselect Listbox to correctly pass along all of the item selections to a Query which a form is based on.
I've been up and down the forum, and I can't figure out what piece of code to use and how to use it successfully.
I've been able to get a string created using the example posted here (http://www.access-programmers.co.uk/forums/showthread.php?s=&threadid=47909) and it's in the format of "54,67,89,100" etc.
Public Function Public Function fMultiSelect(ctlRef As ListBox) As Variant Dim Criteria As String Dim i As Variant
' Build criteria string from selected items in list box. Criteria = "" For Each i In ctlRef.ItemsSelected If Criteria <> "" Then Criteria = Criteria & "," End If Criteria = Criteria & Format(ctlRef.ItemData(i), "0000000") Next i
fMultiSelect = Criteria gMultiSelect = Criteria End Function
I now need to pass that string to a Query. Once it's been passed to the query, I can open the report based on it.
Essentially I have a button that will perform the string creation, and I would then like to open a report. I want to base the report off of a query and then have the query use Criteria to dwindle down the report.
Am I missing something here?
The long explanation:
I have a single form that allows for the selection of the report. Once the report is selected, certain fields appear that allow for certain criteria to be selected (ie. Class Name, Multi-Select Class Name, Student Names, Multi select Student Names, Dates, etc.)
Once the report has been selected and the criteria set, a user hits a single button that runs the specific report.
Any better ideas of how to set this up. The reports will ultimately be basing their criteria on what the form has in all of it's unbound fields.
I also have a table that specifies the Display Name, actual Report Name for the button to figure out what report to run.
Bottom Line. I want to use a Listbox to filter a report. If I can use a query to base the report off of even better. I don't want to create the SQL in VBA.
I'm trying to determine the SQL to return only those records in a table which have duplicate values in each of two fields, but different values in a third field. Here's an example:
Code:
AcctNum FoodType FoodClass ------- -------- --------- A123 Apple Fruit A123 Apple Fruit A123 Grape Fruit A456 Potato Vegetable A456 Potato Perishable A789 Carrot Vegetable A001 Banana Fruit
For the above table, I'm trying to return records which have multiple entries for AcctNum + FoodType, but DIFFERENT values for FoodClass. So for the above table, the query would return:
It returns these two records because there is more than one record with for the AcctNum + FoodType (i.e. 'A456' + 'Potato'), but DIFFERENT values for FoodClass (i.e. one record has 'Vegetable' while the other has 'Perishable').
i have a multiselect listbox in my form. The multiselectlistbox contains the names of different persons from tblUsers. it's allready possible to write the id's of the names to another table (tblPresent).
But what I can't manage to do is re-select the values in another multiselect listbox. This multiselectlistbox is located on my editform. I can display the values using a valuelistbox, but i need to see the non-selected items too..
Im trying to pass a list box variable in a select query. I understand you cannot pass a variable directly but have to pass it through a function. I may be wrong in this, but whatever I do I cannot get it to work. Here's my code:-
Public Sub GetEquipment() List387.RowSourceType = "Table/Query" List387.RowSource = "SELECT findequipstr() FROM Equipment" End Sub
Public Function findequipstr() As String If IsNull(List371.Value) Then GoTo function_end findequipstr = List371.Value function_end: End Function
If I MsgBox(findequipstr()) within my Getequipment function, the variable is messaged,
I'm having a problem get a query to select all of the records it should be.
When I filter the source table (200_STANDARDIZED NRGL) to show the data I want to see (PC2 = 6000; GAAP = 02; CGL = 0950, 2735, 2736, 3500 and 3501; STD VENDOR NAME = blanks), I get 33 records.
NOTE: Had to take the PC2 records that were not '6000' out of the dB I've attached in order to be able to send dB bu the PC2 filter is needed in the complete dB.
When I create a select query to the do the same thing, I get either:3 records (when I set STD VEND NAME to Like '') or 30 records (when I set STD VEND NAME to NOT Like '*' ) I've attached the dB - Query 1 is the subject of bullet 1 above and Query 2 is the subject of bullet 2 above.
BTW, the three records that show up in Query 1 are the same records missing from Query 2.
I have form with a button on it that launches a parameter-based Select query (which served as the source for a report). I didn't have any validation measure in place, so if the User supplied a bogus value, a blank report was generated. While not technically an error, it would seem more polished to generate a warning message if the User supplies a bad query value and prompt them to re-enter.
Having read other posts along these lines, I've added an unbound text box to the form which the User fills in first before clicking the button. When the button is clicked, it executes code that uses the DCount function to make sure the text box value is in the source table, and if it is then it runs the parameter-based Select query. My question is how to pass the value in the text box to the query as a parameter. Below is a sanitized version of the code that I've generated so far.
Private Sub SingleItemRptB_Click() If DCount("[FieldName]", "[Table]", "[FieldName]=[TextBoxValue]") = 0 Then MsgBox "Item not in database. Please check value and re-enter." Else DoCmd.OpenQuery "SingleItemQ", acViewNormal, acReadOnly End If End Sub
Access is telling me it can't find the record and from what I have tested it seems to be the Update line, not the where line. I am basing the set portion as equals a query - could this be causing the problem? Or can code be based on a query?
I'm having a bit of a situation with a select query that I set up.
I have two tables, both with a list of serial ID's.
One is table field is formatted like this:
"B0340 13 453423 X" The other is formatted like this: "=B03401345342300"
I wanted a select query that could show me the records in a universal serial like this:
"034013453423"
This leaves out the "spaces", the "B" and the " X". (Couldn't find a way to make Access generate a new field with the serial ID correctly without a query).
So I used the "Mid" expression in a select query and it worked, it showed me the first table in the correct format.I wrote the same "Mid" expression for the other table and it worked too.But, when I ask for the results for both tables in the same query, it shows me much more records than I have(all duplicates). I figured out that when in table one I have 20 records, in table two I have 5 then the query shows 120 results (20 x 5).
I have built a database that shows the purchase of items that have serial numbers, and so are unique. The database shows the purchase oe each item, and subsequent sale, including "Date In" and Date Out".
Each "item" however has a unique transaction reference (Stock No.) I would like to be able to show what items are currently in stock, and therein lies my problem.I am able to use a select count to find all the instances where the stock number there are two stock numbers (ie In and then Out), but have been unable to find a way to filter the records in a query, to show the stock currently held.
only Single instances of the "Stock No." appear in a table, as that would show the current stock held.I have tried numerous ways to achieve this but I have reached a dead end. I am not experienced in writing with SQL.
I created a form that has 3 multiple drop-down selections that is supposed to select records from [TableName_1] based on those selections. I initially created the query using the query designer with actual "hard coded" selections to make sure it worked. When it gave me the expected records, I changed the criteria from the "hard coded" option to the input form's control reference [Forms]![FormName]![ComboName]. I did this one at a time and tested after each change.
After the first change, I got exactly what I expected.
After the second change, it seemed okay. (note: I put the criteria on the first criteria line in the query designer, not on the second line)
After the third change, I get the dreaded: The expression is typed incorrectly or is too complex to be evaluated....
Here is the SQL:
SELECT M_Lending_Institution.InstitutionName, M_Lending_Institution.GeoRegionID, M_Lending_Institution.SpecialtyID, M_Lending_Institution.SBA FROM (SELECT M_Lending_Institution.InstitutionName, M_Lending_Institution.GeoRegionID, M_Lending_Institution.SpecialtyID, M_Lending_Institution.SBA FROM M_Lending_Institution) AS LenderSearchQuery WHERE (((LenderSearchQuery.GeoRegionID.Value)=[Forms]![LoanSearch]![CmbPrefGeo]) AND ((LenderSearchQuery.SpecialtyID)=[Forms]![LoanSearch]![CmbSpecialtyArea]) AND ((LenderSearchQuery.SBA)=[Forms]![LoanSearch]![CmbSBA]));
And once this is sorted out, yes I want to be able to allow for all records to be returned if any of those fields is NULL. I've read a LOT of posts around this subject, but I can't seem to find anything that answers my question without jumping into advanced VBA code.
I have three tables. TableA contains certain order information, such as the username of the employee, type of order, alias number, etc. TableB contains phone numbers, username of the employee, etc. TableC contains supervisor names and alias numbers.I didn't make these tables but that's what I'm working with. I connected TableA to TableB with the username of the employee, and then TableA to TableC using the alias numbers.
I have a report that summarizes how many orders of each type there are. It shows the supervisor, employee username, alias numbers and then each type of order with the amount of orders of each type under the headers.My boss wants to be able to click on the amount of that type of order and have it show him the details for those orders. This is where my problem is.
I was able to use an Inner Join type of query that allows me to filter the data by order type (however, I have to make a new query for each order type since I'm not too experienced on this). The problem is that I cannot find a way to have a query filter the data by order type AND employee username, so that it only displays the orders taken by a certain employee and it only contains one order type at a time, depending on which order type you clicked.
