I have a query that runs - off the back of this, a report. The query will show a name eg dave however the report will show Daves unique key (eg 3) and not just say dave how do I sort this?
View RepliesI have a main report with one subreport. The main report contains details of a payment being made to a supplier. There is the total amount being paid, and the cheque number being transferred. There is also a field called payref which is made invisible. This is used to link up with the subreport. The amount is the total of several invoices for which payment is being made.
The subreport contains details of each of a number of the invoices being settled. The subreport is linked to the main report via a common field called pay-ref, and the subreport is 'visible'. The subreport prints when placed in the page header section of the main report. However when there is a large number of invoices being shown in the subreport only a certain number appear. It appears that the subreport can only hold a certain number.
When the subreport is put, as it should, in the detail section of the main report, it does not appear at all in the main report. I have no clue why and I have made several reports like this one before.
I have a REPORT containing 7 ('columnar') subreports. Each subreport is to show showing a days worth of medical doses.... to visually represent a wall planner.
When the report loads - user enters a week value # via Inputbox(). This value is written to a TEMP table. Each subreport accesses this same TEMP table to retrieve the week # value. In the Recordsource for each subreport I have the following code :
SELECT * FROM GETPATIENTREADINGS_WEEK WHERE (((Format([DateR],'ww'))=DLookup("WeekVal","[TEMPTABLE]")) AND ((GETPATIENTREADINGS_WEEK.DayVal)=1));
... where the DayVal goes from 1...7 corresponding to the columnar position of each subreport on the display ie. for each day of the week.
The problem I am having is that when the report runs - I see the display showing the data from when the report was previously run. ie. I have to run the report twice to see the data for the correct week value entered. All the SQL works as expected when I run from Query view but when I run through VBA..
On design, layout and report view, everything looks exactly how I want it. However, when I display it in Print Preview mode, checkboxes appear about the Project Name.There's nothing in my report to show that I have these checkboxes on the report. Where these could be coming from and why they only show in the Print Preview layout?
View 2 Replies View RelatedI created a Report from a query. The query shows the correct data that should be on the Report. I created the report to sort by Field A and then sum Fields D, E, & F. None of the query data shows up on the Report. I;m stymied as to why I can see data on a query, but the ONLY data that shows up on the Report is Field A. None of the summations show. All are blank with the box outline.
I've created the report 3x thinking I did something incorrect. Whatever it is, I did it 3x!
I have a subreport with bitmap files attached, the sub works great until I link it to the main report then the sub shows nothing.
View 2 Replies View RelatedOn report, date shows as: 5/23/2015
I want it to show as: 05/23/2015
The input date in main table has the same format as the fields without the '0'.
Property for all date fields appear the same...
I have a very simple report that is generated from a table. There are no queries associated with this report. When new information is entered into my table I run the report and the new information appears. It has been working correctly for months. Now all of a sudden after the new information has been entered it doesn't show in the report.
View 4 Replies View RelatedNeed to track donations in two areas. Have one query that tracks them in location A and one that tracks them in location B. Same query, no other difference. Report made on location A is fine. Made a copy of it and based it on the 2nd query--and I get a pop-up "Enter Parameter Value" for Last Name. The Last Name field is not in the query or anywhere in the report that I can find.
View 3 Replies View Relatedi want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I have an Access 2010 database with a memo field formatted for Rich Text.
I created a simple form. It accepts and shows paragraphs, i.e. I press Return and a new paragraph appears (with a blank line in between paragraphs).
I then created a report based on the same fields. In the memo field it shows the text entered in the form, but not the paragraph breaks. It just shows one big block of text without any paragraph breaks. I have looked for a field property in the report design and layout views that might affect how the text is displayed in the report but I cannot find one.
It is not much use if you can input paragraph breaks in a form but not see them in a report.
how do I set up supplier name in the order table like the example in the
northwind database?
what I mean is set supplier ID so that it shows combo box with names instead of numbers.
I have a report that should only show 1 page yet I have 2 and one is blank . I cannot find out why?
View 3 Replies View RelatedI have an employee table(parent) and family (child)members table. I have a field in the Family table called employee which i have created the one(employee) to many (family relationship). When I add a new family member why does the employee id not show automatically show in family table. I have to add it manually.
View 6 Replies View RelatedWhat I am thinking of is to have a fairly simple table, as follows:
Date
Supervisor Name
Day type (Sat, Sun or Weekday)
Duty Number (combo box, looked up from a separate small table)
Time Start (auto-completed based on Duty Number)
Time End (auto-completed based on Duty Number)
Target A (which would be a number such as 1.20 or 0.90)
Target B (which would be a percentage such as 85.00%
Result A (same format as Target A)
Result B (same format as Target B)
Restriction (whole number, no decimal places)
Output 1 (percentage)
Output 2 (percentage)
Then have a report that shows each day's data for each day worked, with a set of text boxes at the bottom of the page in the footer area most likely, that show the average of all Target, Result, Output and Restriction fields for all the dates shown on the report.
It would be most likely to be ran for a 7 day period or a 28 day period, but if it could be made able to cope with any number between the dates specified at the time that the report was being pulled, that would be ideal.
Is this possible, and what would the code be to get a field to calculate the averages at the bottom (I presume that this code would have to be different to handle the decimals or the percentages?)?
Hi Guys,
I`ve searched the forums, but not knowing the terminology, i cant find what I`m looking for.
I have a table which is use for a drop down list in my forms.
This is saved into a table, but shows up as a numerical instead of the name value.
Also In reports, I get a numerical value, instead of the text value.
Is there something I`m over looking ?
Or am I doing something totally wrong.
My relationships are correct. and the field data is right, I just cant over come the number issue.
Thanks in advance.
I modified some reports in my music library database to have the composer first name and last name appear as one field. I'm not sure what is wrong with them, and request another pair of eyes look at them to see if the error(s) can be found. Please bare with me, this is my first post to this forum so I'm not sure if I am following the rules correctly, yet I have posted to the Java area before. I'm not sure what I should include for help, since when I try to include my database in *.zip format, it is saying it is too big to send. Any ideas on what I should send?
View 2 Replies View RelatedI have a list of departments, 1-17, where each needs a SUM of their price for each end of day.
At first I was going to make 17 queries, and place each into a new sub-report, but there must be a way to list all 17, even if they haven't had a sale put through.
I've tried linking using "show all values in tblDept and only those that match in tblOrder" - but I cam across a very obvious issue.
The items are grouped by Z1 Number, a unique number for the end of day sales. If there is no department linked to a Z1 number, then it won't show it. For example, if there were no sales in dept01, then there is no record under tblOrder to show a Z1 number for dept01 - so there is nothing to link to in the report.
I was then thinking of creating false data at the end of day so the Z1 number mentioned each department at least once, but that would get messy and not 'normal'
I'm thinking of a type of loop to generate the report so a 17 row report is generated,
I have a bunch of records that are assigned to categories which are problem tickets. I would like to print the report showing not just the categories that have records open in them now, but also ones that don't have any records in them. So say I have these three categories. Power, Circuit, Hardware failure..If I have a few open tickets in circuit and hardware failures and none in power. Power will show show up on the report but with no records listed underneath it.
View 1 Replies View RelatedHowever, the data is now showing on the generated invoice.The rest are showing up but one.I went back to the tables to check and there is data present.It used to work until recently.
View 3 Replies View RelatedHow to hide a Record when "False" or a box is unticked on the report.
I've used a Query for the report and figured it would go in the Criteria for the tick box but can't find the code I need (I am sure it is simple)
I have one query that the main form is based on and another query the subform is based on.
I linked the subform to the main form by a common field "Branch"
My main form displays Grouped Employee overhead totals based on Branch
Example:
Branch 1 Employee overhead cost...........15,000.00
Branch 2 Employee overhead cost...........25,000.00
The subform displays grouped branch expense overhead totals based on Branch
Example:
Branch 1 Branch expense...........125,000.00
Branch 2 Branch expense...........155,000.00
I am trying to display both the employee overhead total and branch expense in the Branch Header of the mainform.
Example:
Branch 1 Employee Overhead...15,000.00 Branch Expense...125,000.00
Branch 2 Employee Overhead...25,000.00 Branch Expense...155,000.00
I tried using an IIF statement in a text box in the mainform branch header section to return the branch expense if subform branch = mainform branch.......When I run the report I get all of the Employee overhead but only the last record for Branch 2 branch expense displays.
Example:
Branch 1 Employee Overhead..15,000.00
Branch 2 Employee Overhead..25,000.00 Branch Expense...155,000.00
Then, I tried just putting a text box in the main branch header subreportName.Report.TotalField
When I run the report it returns all employee overhead with the Branch 2 total for every branch in the mainform...
Example:
Branch 1 Employee Overhead..15,000.00 Branch Expense...155,000.00
Branch 2 Employee Overhead..25,000.00 Branch Expense...155,000.00
I'm working with a report that totals the number of times a topic is returned from a query. If a topic is not returned at all, i don't want it to show at all. Currently it is showing a blank field for that topic name and blanks in the count as well. Here's the filter i've put in to pull the right data out of my query: =Sum(IIf([Caller Used Resources]="No",1,0))
View 2 Replies View RelatedI have a form with command buttons to preview reports. For some reason only the first record shows up on the reports and not the current record.
View 10 Replies View RelatedI have three tables.
The first is my table of pupils which is linked to the second table: a list of awards and a score 1-5
My third table is the list of 10 awards.
My problem is that (in my report) I want to show all 10 awards for each pupil regardless of if they have achieved them. I'm struggling with the underlying query to always show all 10 awards.
So, little Johnny has achieved a score of 5 in two of the awards, however the report card will show blanks for the remaining awards on his report.
:p Hello,
I am wondering if anyone can help me create a query (which is used as a basis for a report) using a criteria which is clever enough to know that if all fields are have an N (no) that a report should not be generated - but with anything else e.g. all Y's or a mixture of Y's and N's that a report will be printed. There are 6 columns where there could be a Y (yes) or an N (no) and I would really like to know if this is possible in access??
Thanks.