I upgraded to Access-2010 and the Text File Import function will not recognize dates in the format YYYY-MM-DD. The import dialogue sees enough to recognize the field as a date, but then every date encountered is written to the Import-Errors table. This is true whether the file has a .txt or .csv extension. The actual file format is .csv.
View RepliesI am building a database using data imported from Excel workbooks. The dates in the workbooks are formatted as text in the YYYYMMDD format. Is there a way to convert this into date format during the import or after? I am pulling in a lot of different workbooks and trying to avoid having to reformat each individual workbook prior to importing them.
View 3 Replies View Relatedsimple table 6 columns
startdate
enddate
custacct
salescost
salesprice
salesqty
the txt file is set up so that there is a header record, 4,999 lines of data, then the same header record, then 4,999 lines of data, then a header record etc etc. for as many lines as is in the download. This is a download TXT file from a Microsoft Axapta ERP system.
I have my table all set up and during the import I want the header records to be dropped. I tried in the validation section for startdate {Not "startdate"} but that did not work. Is there some simple way to ensure the header records are dropped?
Is it possible to have a command button on a form to run the Text File Import Into a Table Wizard?
View 13 Replies View RelatedI'm trying to import a text file with 273 fields into two tables. I've been able to do this with the code I found on an old thread and I'm now trying to accomplish everything with one step. The file I'm importing is tab delimited text file. With this current code I'm only able to populate the first record in the table and then I get error message. (Run-time error '3265') (Item cannot be found in the collection corresponding to the reqested name or ordinal).
Code:
Public Sub ImportTextFile()
' to use the ADODB.Recordset, be sure you have a reference set to ADO
Dim rst As ADODb.Recordset
Dim rst2 As ADODb.Recordset
Dim strFile As String
Dim strInput As String
Dim varSplit As Variant
Dim intCount As Integer
[code]...
I'm struggling with a validation rule that almost works but not quite.
I want to restrict the values in a feild by characters between 0-9, A-Z, _ and -
Using the following string works for all except the hyphen, which I assume is because it's an operator:
Is Null OR Not Like "*[!((a-z) or (0-9) or (_) or (-))]*"
Is there something I can do to make it recognise the - as text?
Hi:
Working with a bank that wants a file from us so they can import into their check reconciliation program. Got the export from the accounting program working for the info they need, but the bank guy says he needs a file structure like this:
(first row is header..don't worry about what the stuff means for now)
1234578990000000000000000
(rest of rows are details)
1234589000807091234
1234589000807093456
notice the line breaks between header and rows? Wouldn't this call for a line break and mess up an import program? Bank guy isn't a database person and is clueless
Thanks......
I want to format the text using format function. how i format the word apple to "apple" (With Quatation mark).
str = Format(Me.word, xxxx)
hello,
I would like to automate something presently done on a one-by-one basis. Here: a number of text files(containing data) are to be exported into an MS Excel file, with each text file to occupy a different worksheet. Presently, the idea is to use the Data/import external data/import data feature of MS Excel for importing the text files one-by-one into newly created worksheets(within the same workbook).
I would appreciate some advice on how to go about creating a useful MS Access application to achieve the above. I have checked the available Macros in MS Access, but I could not find one to suit my purpose. can anyone pls assist, on how I can get started?
Tokunbo
There is a manual process I'd like to automate. Instead of the user manually importing an external file into a table, I want a function to grab the most recent file in a particular directory. Is that possible?For example, I have a table called Input, and I want to append the file I just saved on my network, which in this case is G:Files2014TA_140928_011007.txt. The two ways to know which file to use is that the date is part of the filename (TA_ YYMMDD_ 999999. txt), and also the Date Modified attribute.
I am aware that if the user needs to work the files out of date order, he/she cannot use this code.
I have a Qry1 that contains a criteria of:
Between [Start Date] And [End Date]
I eventually use a crosstab Qry2. The wizard does just fine.
but when i run the crosstab, i get an error message:
"the microsoft Jet engine does not recognize "start date" as a valid field name or expression."
Is there anything i can do?
Penwood
hello everyone, i really need some detailed help as the deadline is approaching and I need to find a solution for this. Any help would be greatly appreciated
I currently have a batch file that ftps a text file from a Red Hat Linux Server to my W2k C:. I would like to make another command in the batch file that imports this text file into an existing access table. I would like the text file to repopulate the table everytime it is imported. I do not want the data added on to the existing data in the table.
Thank you for your time and insight.!!!:)
I am trying to create a user-friendly database to enter invoice records (deductions and additions) for securities. I would like to be able to run queries with running totals from month to month inclusive (end total of one month = starting total of next month). I have already figured out how to create a running total; however, I have numerous "companies." Each record could be from any of 30 companies. When I add up the running total from say January 1 to February 28th, I get the additions and deductions of all the companies, not just the one I want. Inputting the companyID (example A110) in the query box only adjusts what is displayed, not the running totals that go by the total deductions from the records before that record (I assigned each record a "database ID" because dsum does not recognize dates in the criteria box, if I want to do a running sum.
I also was wondering if it would be possible to build forms with macros to create these queries in a user-friendly manner (so the company that I am interning for can create queries when they need them without me there).
Hi
I have a log file that records an action in following format.
50144021 12-17-2004 21:00:44 Mail Sent Subject: Test file TO: bert@xxxxxx.com
I want my database to look into this file and return the date/time of the last send in the log to match up with a record in one of my tables that has following fields: "email","last sent", "subject". ( The match will be done on the email address)
I can therefore look at each record and identify when each email address was last sent the file
Any help would be much appreciated
Thanks
Mat
Hi all. Another question that i hope ya'll can answer.
I'm trying to take a comma divided text file and import the raw data from there into one Access table to allow for various data manipulations with the end result being a very nice printable report. Unfortunately, I can only get the data in a plain text file, and not a CSV file.
What I'm looking for is a method to where I can import one or many of these text files into a database at one time via a fairly automatic process (pressing a button to load all the text files in a given directory would work), and have the data filtered according to the pre-defined variables in the text file itself (which could just be pre-entered into the database as a template). How would I go about doing this?
p.s. If anyone wants to see an Excel file of a manual data sort to see what i'm talking about, please e-mail me and I'll send it off.
p.p.s. Thanks for any help you can give me
raw text file data (there's more, but this will suffice as an example):
price,volRemaining,typeID,range,orderID,volEntered ,minVolume,bid,issued,duration,stationID,regionID, solarSystemID,jumps,
4500000.0,16.0,25619,32767,512583166,16,1,False,20 07-09-04,7,60006655,10000043,30003562,12,
5010707.0,3.0,25619,32767,511108734,3,1,False,2007 -09-03,30,60006658,10000043,30003563,12,
5523022.0,2.0,25619,32767,512004088,2,1,False,2007 -09-04,14,60008494,10000043,30002187,2,
5010000.0,17.0,25619,5,512177386,19,1,True,2007-09-04,7,60008950,10000043,30002187,2,
How to read data in file (attached) and import data by reading certain amount of characters in a line like A02 and read 30 to 40 characters which has the Name of a passenger and may 20th to 25 has the name of an Airline. Import these data into a table with pre-assigned columns.
View 11 Replies View RelatedI have an excel table called Parameter with a column called "Test" -- The column contains integer numbers only. So all the numbers in the column are like 5,10,15,20 etc..I have an access macro which imports the entire excel table into a access table called dbo_Parameters
I have created an access macro to run "Saved Import" for 'dbo_Parameters"..After uploading, all the data in the column Test is formatted to mm/ dd/ yyyy. The Field Size is Integer, but the format is view format is converted to a Date..I have to change the properties of the column to "General Number" and get rid of the date format.how to change the import format!
a) The format of the column in Excel - It is number
b) The import procedure and saved import. I am unable to change the format of the import during upload. I make sure that the import format column is Integer
Hi, I'm trying to import a text file (just for a test at the moment) with the fields seperated by |'s.
The table I'm trying to import to has the fields -
ID, First Name, Last Name, Gender.
The ID is an autonumber though so what can I put there in the text file because I'm getting an error? :confused:
Hi,
I'm importing the contents of lots of text files using a combination of a loop and DoCmd.TransferText.
This works fine and I can get the contents of several hundred files in a few seconds. The files are called 1.dbb, 2.dbb... and each has an associated image file, 1.bmp, 2.bmp... etc. After the import I move the files to a new folder.
I need to create a link to the bmp file but this information is not included in the text file so I need to rely on a field which contains the file name.
How can I populate a field at import time to include the name of the imported file?
Anyone give me a clue please.
Regards,
Bernard D
I am importing a text file into Access97 using fixed width with import specifications that specify NO to indexing. However, when I run the Macro, it automatically indexes the first field (which is a long integer).
Why? How do I import the text file without having the index automatically added?
I am trying to complete a macro that starts with importing of a text file. However, when I go to complete the steps in the macro, I do not see the specs for the import file that i created. There is a dropdown with a few specs for me to choose from in the box titled "Specification Name" when I am completing the action titled ImportExport Text. However, none of those specs are the right ones.
When I go to "Saved Imports" I can plainly see the import that I am interested in. So is a Saved Import different than a spec? If so, what steps do I need to do to create the spec?
They are receiving e-mail with some data that they want to transfer to access database to track. The one think they can do is copy past, copy paste. That is a lot of data to copy and paste. The date looks like this format
Field1
Text1
Field2
Text2 (text2 can be more than 255 char)
Field3
Text3 (text3 can be more than 255 char)
Field4
Text4
Field1
Text1
Field2
Text2 (text2 can be more than 255 char)
Field3
Text3 (text3 can be more than 255 char)
Field4
Text4
and so on.. It can be 50 records
I am thinking they can copy this to the text file. Then the code form Access grabs the text file and imports to access table with format below.
Field1 Fied2 Field3 Field4
Text1 Text2 Text3 Text4
I am trying to import a non-delimited text file into access, but where there is a strict hierarchy to the records, i.e.
NAME:
AGE:
DOB:
etc. etc.
The field names are constant throughout the document but the pages are of variable length depending on what is in the fields.
Hi,
I am trying to email a table in text format using :
DoCmd.SendObject acSendTable, "Table", acFormatTXT, , , , "Results", "Attached are the reslts"
It sends the file in text file format, but it adds "-" & "|" characters all over the file. Is there a way that I can send the file in simple "Comma Separated" file format.
Thx,
Jatz
Hi,
I am trying to email a table in text format using :
DoCmd.SendObject acSendTable, "Table", acFormatTXt, , , , "Results", "Attached are the reslts"
It sends the file in text file format, but it adds "-" & "|" characters all over the file. Is there a way that I can send the file in simple "Comma Separated" file format.
Thx,
Jatz
I currently have a query pulling data from a database - I need to now export the data to a text file to import it into a different database. I need the format to be like below. Wondering how I can tell the query to go to the second line and then the third line like below.
*,9215146,BUILDERS LLC,4285 NICOLET,DALLAS,TX,75201
P,2
C,2,,BRD