I'm trying to understand loops but I'm not making any progress. I'm trying to write a loop to calculate the average of the past 10 Values including the current Value. This is what I have so far.There are also Fields for "Date" and "Time" if that is useful.
[code]
Dim index As Integer
Dim RollAveTotal As Long
Dim CurrentValue As Variant
Do
'There are 4 possible Grades. I only need "Grade 1"
[code]
May be VBA is a better solution for this:
Say for Material A: I need Access to see that the 1st date is 05/01/2013 and say 365 days out or 12 months (05/01/2013-04/01/2014) the average is 158.6 then 06/2013-05/2014 the average is 146.667 and so on.
Every month is not going to be listed in the results, if there is no month then assume 0.
Sample data attached.
Hi,
I need to calculate an average waiting time for patients waiting to be seen in an A&E dept between two dates.
I have calculated the total waiting time for each patient with the following formula
Total Waiting Time: Format([Time Arrived]-1-[Time Left Department],"Short Time").
Any help much Appreciated
I hv a access mdb which contains one column as "duration", data format as hh:mm:ss, e.g. 00:02:20 - 2 mins 20secs.
How could I calulate the average of the duration?
like sum of all duration fields / the ttl no of records.
Currently using a lot of Power Pivot Tables which in part calculate "averages" - but when the data comes form a Query that contains a calculated field using the iff() funtion such as: Outcome: iff(Status = "P", 1,0) we end up with a lot of zeros that create a problem in calcuating a true average. In the following example 2,3,0,1,0,0 the average is "1" but if the zeros were blank the average would be "2" because the blank cells would not be counted.
Is ther a way to have something like: Outcome: iff(status = "P",1,"blank") but what I want is ether 1 or a blank cell, NOT TEXT. If we use "" for the false outcome we still have cells that look blank but are in fact text cells and are counted in calculating average.
I need to calculate the average repaired time and the average response time. These are two separate fields ....
View 1 Replies View RelatedI have a report that comes from a query with multiple expressions. The expressions look something like this:
IIF([TimeArrive]>[TimeTriage],DateDiff("n",[TimeArrive],[TimeTriage])+1440,DateDiff([TimeArrive],[TimeTriage]))
This works great and my report gives me my columns for each expression in minutes they way it should. Now here is the question...is there a way to insert a text box for each column/expression so I can calculate the Average for each column/expression?
i.e. I want the report to show the average minutes of Expr1 and Expr2, etc at the bottom of each column.
Is there any formula or any way to calculate moving average on access? What I need is to calculate a value based on data from the past 3 months:
I have following structure for example:
Column A ----- Column B -------- Column C
ValueA1 ------- Value B1 ---------
ValueA2 ------- Value B2 ---------
ValueA3 ------- Value B3 --------- =average (ValueB1, valueB2, valueB3)
ValueA4 ------- Value B4 --------- = average (valueB2, valueB3, valueB4)
My main point id how to calculate values for column C.
I obtained data for earnings by industry for men and women over time (5 years). I developed crosstab query that showed the average earnings for men and women for the 5 years.
Now I want within this query to calculate the differential between men and womens average earnings and calculate a percentage within this crosstab query. I tried to use Expressionbuilder with little luck.
I found the attached example a while back (can't find the site again though ) and it calculates a moving average. I've hacked out the parts I need for my own work and I can create my moving average query without an issue.
However, I need to extract the MA data into a table so planned on using append. I kept getting type errors so I tried make table to see what type it was creating and it appears to be Short Text rather than a number.
I've added an extra button and Make Table query to the example.
As far as I can tell from the code, the moving average value when calculated is a Single. However, when I write it to the table, its a Short Text.
How do I make the created Table use Number Type for my calculated moving average?
Using Access 2013
Hi guys!!!!
I try to find an answer in the forum about "Average Fields",but ican't
I am confused:(
I wan't to export Avg Of the fields like in the panel below:
I have a query that finds an average. How can I get the average to only show two numbers after the decimal?
View 4 Replies View RelatedI apologise for my ignorance, but I’m very new to Access.
I have a database of dates, that I need to analyse.
I have created a Form called "DateRange" with 2 date fields;
Text1 = Date From
Text2 = Date to
Command1 = Preview Report
My Query has 2 fields;
Slotdate = all the dates (show as 20051210)
Actdur = Actual Duration (show as numbers 1 or 12 or -3 etc)
The SQL View is;
SELECT slotapp.slotdate, slotapp.actdur
FROM slotapp
WHERE (((slotapp.slotdate) Between [Forms]![DateRange]![Text1] And [Forms]![DateRange]![Text2]));
I just want to calculate an average of Actual Duration
So that my report displays the average duration between the date ranges.
Any assistance in this matter would be greatly appreciated
I've looked thru a lot of posts, but can't seem to find the solution. It seems like this should be something I could figure out, but so far have not.
I have a table that is showing a production number for each day. What I'm trying to show is the best 5 day average production over a period of time.
Thanks,
Tom
Could someone please tell me how to work out the age of someone using a query or report and the average age of everyone?? I also need to know how to put on a report the total number of people satisfying the search criteria. It also says i must obtain a single record for each person and to do this i need to change a query property to allow only unique records to be displayed? do u know what this property is??
Please help!!
Thank You
Is there any way i can calculate a rolling average for a field in a record, based on the 10 previous records?
Cheers,
Ben
I have a customer concerns database that contains the dates for when the concerns were reported and tyhe dates for when the concerns were resolved. I am trying to make a query that finds the average of how long it takes for the concerns to be resolved. How can I do this?
View 1 Replies View RelatedHi,
I'm trying to create a query that returns 10-min average wind speed.
I have the logging date,time and the wind speed per second in the wind log table.
Date and Time Wind Speed(mph)
28/04/2006 2:17:01 PM 10.5
28/04/2006 2:17:02 PM 10.6
28/04/2006 2:17:03 PM 10
...
And I would like something like this from the query:
Date and Time Wind Speed Ave
28/04/2006 2:17:00 PM 10
28/04/2006 2:18:00 PM 7
28/04/2006 2:19:00 PM 5
......
Thx,
1.8T
i have a date field with time and date each record is entered. results look like this
Date_Complete
4/9/2007 8:26:11 AM
4/9/2007 8:31:25 AM
4/9/2007 8:34:14 AM
4/9/2007 8:34:21 AM
4/9/2007 8:34:29 AM
4/9/2007 8:34:36 AM
4/9/2007 8:34:49 AM
4/9/2007 8:41:27 AM
4/9/2007 8:41:49 AM
4/9/2007 8:42:32 AM
4/9/2007 8:42:39 AM
4/9/2007 8:42:49 AM
4/9/2007 8:43:36 AM
4/9/2007 8:44:21 AM
4/9/2007 8:45:48 AM
I want a query or report to give me the average entry time per record. Something like: Average time between orders 1:25 (one minute twenty five seconds)
I want to create a running or moving average of the most recent 5.
can anyone help here?
see attached file
Mix IDTest Date 7 Day1 Avg of 5Ave 28 Day
SF227
2/1/2007 3870
2/1/2007 2160 5415
2/7/2007 3580 5505
2/7/2007 3510 4955
2/12/2007 2990 32204965
2/19/2007 2800 30085500
2/19/2007 3330 32424920
I need to make a query which counts the number of days between "Date of Complaint" and "Effective Date". This is what I have so far:
[SELECT [Customer Complaint Log].[Complaint Number], DateDiff("d",[Date of Complaint],[Effective Date]) AS Expr1
FROM [Customer Complaint Log]
WHERE ((([Customer Complaint Log].[Effective Date]) Is Not Null) AND (([Customer Complaint Log].[Date of Complaint]) Is Not Null));
I need to make it so that it uses todays date for "Effective Date" if there is no "Effective Date". Any help would be appreciated. Thanks.
I am running a query that returns the minimum, maximum, and average mileage of a list of cars. I have set decimal places to zero in all places I can think of, but of course the average returns with a long decimal output. These figures are then displayed on a report.
How can I truncate the 'average' display so it rounds to show no decimals?
I have tried using Round([YourNumberFieldName],3) in the query but that doesn't seem to work.
The numbers are stored in a table as double numbers. Again the decimal places are set to 0.
Thanks.
I have a file with hundreds of home builders. It has three fields for this problem.
Table = Permit
field = Per_date (Date Field) Date BLD record appears in table.
field = BLD (Char) Builder number or Name
field = SQFTArea (N) Size of home.
1. I need to be able to get the average for (SQFTArea) for all records greater than 950 (SQFTArea).
2. For year 2007.
3. Grouped by Builder (BLD).
Example: Per_date - BLD - SQFTArea
Record: 2006 - 012 - 0500 Not becouse of 2006 and 0500
Record: 2007 - 012 - 2500
Record: 2007 - 012 - 3500
Record: 2007 - 058 - 2000 Not becose of BLD=058
Answer is for 2007 BLD 012 has an average of 3000
BLD 058 would be figured with it's self at average=2000 if the only record with this number or used with any other records that are BLD 058.
I have asked for help in the past but must likely my examples not that great. Here’s hopping. Hopping?? I hope I got that right being as I'm not a rabbit. Spell checker no help on this one.
Bob
First of all I consider myself to have Intermediate knowledge of Access. I am comfortable building tables, queries, reports, macros, etc. but get a little lost when needing to manually code something in a query.
I need to create a database to document quality reviews of certain reports the plant creates. Typically each report gets reviewed by 2 to 6 people and each section is scored. So lets say the database table has the following fields
Report_No
Reviewer_Name
Review_Date
Section1_Score
Section2_Score
Section3_Score
Total_Score
I need a query that will average each of the Section Scores and Total Score so I can build a monthly report showing the report and the average grade for each section and the average total grade.
Any suggestions on how to do this is appreciated.
Thanks,
Jim
I need help with a calculation in my form. I have a form named families. IN this form I have 12 check box's, one for each month. I would like to set up another box which would take the average of the past 3 months and tell me what percentage of the time the box is checked. For example, since it is december, I would like a box named quarterly average to look at the past 3 months, obviously september, october and november, and tell me in percentages what the percentage is that the past 3 months check boxes have been checked. This is the basic code which I created for my unbounded box, but I want it to be dynamic, so that it recognizes what the month is today and tells me automatically what the percentage is.
Control sourceis set to =Abs(([Sep]+[Oct]+[Nov])/(3))
Thanks,
Tim
Good day,
I am looking to calculate a simple average of two numbers when my form loads(It appears to be a basic concept, but I cannot figure it out). I have tried to build an expression but this didn't show any value. =([score1] + [score2])/2
I have attached my db to view my problem. I am wondering if anyone can assist me with this.
Thanks