Ok... big time newbie/hack here. I have a tiny bit of programming experience from waaay back with UNIX and C. Have basic database experience and understanding but no VB experience. So I appologize ahead of time if this seems really simple. I'm working on "fixing" a small access database/program for my wife's work. Very simple design.
I have a company table and a customer table. I have customer form and a company form. They may have several customers at the same company. So my design has them starting on the Customer form. They begin by filling in the Customer's Name and then they get to the Company Name combo box. They should select the Company Name from this box. If it is a new company and is not in the list they should click on the "New Company" button beside the Company Name field. Then the Company Form opens and they can add a new Company along with Company address and phone numbers etc. Then they close the Add Company Form and then can select the newly added Company form the Company Name combo box (by the way, the only way I could get this box to update with the new company name was to use a macro that only runs the Requery statement for the On Enter event... it works... I hope this is ok).
Anyway, this is where my problem arises. I need the selection of the Company Name to also pull over the address, phone number, fax number, etc. info from the Company table and complete it on the Customer form/table now. How do I do that? I think I need to do this with the After Update event with some VB code... but I have no idea how to actually pass this data. The property for my combo box is as follows:
Control Source........CompanyName
Row/Source Type.....Table/Query
Row Source......SELECT zMASCompanies.CompanyName FROM zMASCompanies;
The field doesn't have to be a combo box (if this is not the right way to do it)... I just need them to select a company name and have it fill in about 20 or 25 fields from the company table/form into the customer table/form.
I did try searching the forum and found a few things but nothing I found was very clear (especially since I am not sure I am even heading down the right path). Any assistance would be greatly appreciated!!!
First post :) found some great tips on here. Anyway here is my story and question.
I am new to Access development. I know what I want to do, I just can not find a way of doing it :( .
1) I would like my form to only be editable when an edit button is clicked. I am not sure if I can do this on a form level or if I have to change each individual part. Any ideas?
2) I capture some clients details, title, first name and last name. I then need to merge the above 3 fields into one to create a 'policies in the name of' field. Is this posisble? I have tried using the initial value expression but am having no luck. Any ideas?
I'm trying to make it a little further with my new call answering database at work.
Basically it consists of a main form that has a button leading to a call answering form for each business that we represent. it also has a text box that displays the number of the caller when the telephone picks up, the correct call answering screen is also popped by the telephone software and a macro whenever the phone is answered.
I've got code in place that automatically puts the date and time in the correct field and also copy the incoming telephone number from the main form into the caller number field on the call answering form.
I'd like to take this automation a little further now and get the form to autopopulate the caller details if that caller has called before (we get a lot of calls from the same people) so i'd like to make the form search the table it's linked to for the incoming phone number and to fill in the name, email, company etc... for the caller according to the previous record.
The code for the 2 forms i've currently got setup (the switchboard and one call answering screen) are as follows
Switchboard:-
Code: Option Compare Database Dim WithEvents MaxxCom As Metro_MaxxCom_CTI_COM_API.CTI Private Sub cmd_onnet_Click() DoCmd.OpenForm FormName:="On_Net_Communications" End Sub
Have been searching all morning & can't find solution (technique must be haywire)
Have created a combo box query with 3 fields, id-code-description Objective is to select Code from combo box and populate Description field from the value in the combo box into another table
Have tried all sorts of techniques, none of which have worked
I am sure this has been answered a million times, but I just can't find it
Im trying to do the following query work. I have a form, with combos , text fields which are filled in with parameters. The query I want to make is complex. For example we shall use field1, field2, combo1 , combo2 for explanation. I want the field1 param AND the field2 AND combo1 AND combo2 to be evaluated for a result. At the same time, I want the user to fill in only field1 and combo1 or like that and the result to be right. Is there any possibility to make them all work at the same time, individually, or in combinations ?
Sounds too Complicated ?
I ve managed to make it work only by filling in individually the fields or combos and have the right results. The other ways didnt.
I'm fairly new to Access but I've been tasked to re-jig an old databse running on Access 2003. So far the database is doing more or less what I want it to but I need to generate a report showing totals from multiple fields in combo boxes. As an example, I have a combo box for a job booking-in form which requires the type of task to be selected e.g Video, photography, editing. The report needs to show the total booking numbers for each tasks (combo field) at the end of the month. I've managed to create reports for totals of a single field in the combo box but I'm struggling in achieving the multiple totals.
[URL] ....I am trying to dynamically search multiple fields from a combo box on a form that includes a subform. I am using code from the above referenced link within this forum.
It works without the "setFocus" for the Listbox except it jumps to a record after the very first character is entered instead of narrowing down as characters are typed. If I leave in the "setFocus" I get run-time error 2110.
I have a form bound to a table which has 20 (name)fields and 1 date per record. A user fills in this form first to indicate which people are present this day. I know it would be better to use 1 name per record but that would in this case not work since the form must show all names for that day before saving and closing.
I have a different form where I use 4 combo boxes and a date field. The values that can be selected in the combo boxes should come from the 20 names on the first form and with the same date as the other form. So only 4 people of the 20 indicated as present on that day can be selected to have performed some task.
I know how to select with a combo box from different records, but how would I do it from different fields in the same record? And then also for a particular date?
I have created a combo box search for my form based on three categories, 'Student Name', 'Nationality', 'Age' using the wizard. When I click on my combo box in form view, I see 'Alex', 'UK', '19' and 'Stephen', 'Sweden', '22' in the dropdown list, but I do not see the headings 'Student Name', 'Nationality', 'Age' as the first item on the list.
I am using Access 2007 and have reviewed many blogs and looked at the Northwind db to try to solve this problem. I would like to create a form that functions in the same manner as the "Order Details" form in the Northwind db. Specifically, I want to create a form that will allow me to input a value and have the form get data from another table and populate the table I need populated.
I would like to populate a table "Outside", field names are Key, Name, term, Value, Date.
The table that contains the data is named "CV" and the filed names are Key, Name.
In the form, I would like to enter a value for Key into a combo box, and have it put the value for Key and for Name into the form, and allow me to enter whatever I want to in the Term, Value and Date field. When I tab out, I would like all this data to be in the table "Outside.
I have something that is really taken up too much time and also given me a headache... I have a subform related to a main form....cool no problems there. I am using a couple of fields from the main form within the subform and adding dates, names and contact details to associate with the relevent records. Can this subform facilitate the autocomplete phenomina that i see in windows and excell and the like so i dont have to continually type the same names. I tried to select names from a combo box but it got messy and names were being overwritten by numbers and i nearly broke my screen...lol Wanting to get functionality back in to this app at the moment, and suggestions are eagerly sought:confused:
I'm on my way on creating a simple Database for a company. This database contains several tables, one of the tables will record information about the training that had been completed by each employee. There are about ten sections of training that should be completed.
For instance, I have two tables called 'Development' and 'CSA_Lisence'. 'Development' is the table that record the information about training which containing ten checkboxes (which represent ten sections of training) and CSA_Lisence will be automatically requeried when all of the checkboxes on Development are fully checked.
Here's the step I've been worked on :
First, I made a function called 'CheckCompletion' to ensure whether all the checkboxes are checked :
Code: Public Function CheckCompletion() As Boolean Dim blnComplete As Boolean Dim strCompletionSummary As String strCompletionSummary = Basic_Inspection & Certifying_Staff & Safety_Management_System & Regulation_Part_145 & Part_M & EWIS & Fuel_Tank_Safety_Level_2 & Dangerous_Goods & Human_Factor & Basic_Supervisory_Training
[Code] ....
Second, I made a function called 'UpdateEmployee' to handles if all boxes are checked :
Code: Public Function UpdateEmployee() Dim emp_numb As Long Dim emp_name As Long Dim strsql As String emp_numb = [Forms]![development].[employee_number].Value
[Code] ....
Then, I put this code on every checkbox's after update event (example only) :
Code: Private Sub Basic_Inspection_AfterUpdate() Call UpdateEmployee End Sub
The problem is, nothing happened with the tables. However, when I managed to remove the 'If checkCompletion' condition, it worked and the 'CSA_Lisence' is requeried, but I will have ten multiple records with same contents (I just need one record per employee). I guess there's something wrong or missed in my code. Or i need to remove something?
I want to create a Multiple Items form presenting Orders table with two Combo Boxes:
1. A combo box to select Order_Category_ID. 2. A combo box to select Order_Type. When 1 (Minor) is chosen in the first combo box it should show Book and Pencil, when 2 (Major) is chosen it should show Car and House.
Examples in the Internet show how to do it on a 'single row' forms using the RowSource property. I tried to use a query like:
SELECT Order_Type FROM Order_Type INNER JOIN Orders ON Order_Type.Order_Category_ID = Orders.Order_Category_ID WHERE Order_Category_ID = [comboBoxOrderCategoryID]
But it sets same values for all records in the Multiple Items form and it should return different values in each rows based on value in the first combo box (Order_Category_ID).
I want to create a form that allows users to update multiple fields for multiple assets. Below is what I came up with:
Ideally, I'd like the subform to be filled in by having the user select multiple Assets from the S/N combobox field which would then auto-populate the "Type" field. Then they would fill out the appropriate fields they want edited in the top part of the form. They hit save and magic happens. This would also be nice because only assets they want edited would be displayed (easier on the eyes) and no distinguishing would be necessary. To do it this way, I know I would need to use a temp table but I wanna avoid using temp tables.
I know I can do this by adding a Yes/No field in the "Asset" table, setting the "Asset" table as the subform's recordsource, and then putting a checkbox in the subform and allowing them to check the assets that they want to edit (which would also allow me to sort it instantly so that checked Assets are at the top of the datasheet for easy viewing), but I would like to know if there's a way of accomplishing this without the use of checkboxes.
I know I could also use a listbox and that allows them to multi-select items, but I'm not sure if that allows me to group all selected items at the top of the listbox for easy viewing of selected items. Plus it would involve a lot of scrolling (there are over 2k assets).
I HAVE A DATASETS cSV TEXT FORMAT WHICH HAS A SELECTION OF FIELDS THAT NEED TO BE IMPORTED INTO A TABLE. USING THE ADVANCED IMPORT FACILLITY I HAVE BEEN UNABLE TO IMPORT THE DATA PLEASE HELP AS THIS IS FOR MY A-LEVEL STUDENTS.
THE FIELDS REQUIRED IN THE SESSION TABLE ARE, Booking ID, Customer ID, Date Booking Made, Pickup Point, Payment Made
A small issue I was wondering of for a few day . Is it possible in SQL query to SELECT multiple fields from multiple tables ? Example for the question is
Code:
dim my_var as String my_var = "SELECT Emp_FName , Emp_LName , Emp_Adress " _ & " FROM Table1 " _ & " AND Emp_Date_Of_Payment , Emp_Sum_Of_Payment " _ & "FROM Table2 " _ & " WHERE Emp_ID = 3 "
Is this code actually valid in SQL gramatics , and is it usable if passed to a Recordset variable ( rs = CurrentDB.OpenRecordset(my_var) ) ? Just FYI - The two tables are not related and I want to keep them that way (If possible relate their records just via SQL/Vba )
I have 10 tables, 30+ fields on each table (every table has the same 'account number' field). I only need from 5 - 20 fields from each table. How do I get the certain fields from each table and put them in a table, query or report?
I created the below query to come up with a new form. When I enter a single parameter, it works fine. When I modify the code and enter multiple patameters, it also works fine if I do not enter any information for the parameters. But once I enter one of the parameters information, then it does not come up with anything. I double checked and made sure it was typed in correctly. Is there a trick when entering multiple parameters on a query?
SELECT [JE 06 Log].[Operational Region Name], [JE 06 Log].[Period Name], [JE 06 Log].[Source System], [JE 06 Log].[Source Name], [JE 06 Log].[Category Name], [JE 06 Log].[Associated Category Name], [JE 06 Log].[JE Name], [JE 06 Log].[JE Base #], [JE 06 Log].Area, [JE 06 Log].[Line Description], [JE 06 Log].[Natural Account], [JE 06 Log].Description, [JE 06 Log].[JE Entry Date], [JE 06 Log].[Debit Amount], [JE 06 Log].[Credit Amount], [JE 06 Log].Amount FROM [JE 06 Log] WHERE ((([JE 06 Log].[Period Name])=[Enter Period]) AND (([JE 06 Log].[Source Name])=[Enter Path]) AND (([JE 06 Log].[JE Base #])=[Enter Base Number]) AND (([JE 06 Log].[Natural Account])=[Enter Natural Accnt])) OR ((([Enter Period]) Is Null) AND (([Enter Path]) Is Null) AND (([Enter Base Number]) Is Null) AND (([Enter Natural Accnt]) Is Null));
I have a combo box linked to a look-up table. There are 8 fields in the look-up table but only if one of three is chosen do I want additional combo boxes to become visible. Do I put the code in the "after update" or "on change" event of the combo box and how do I express the code-
If TechniqueCombo="caudal" or "spinal" or "epidural" then TextNeedleType.Visible=True
I have had a look through the forum and I am not sure if this can be done. I have a table. i.e. with columns Decsription 1, Cost 1, Description 2, Cost 2 Description 3, Cost 3 description 4, cost 4 etc.
I am looking to try and gave a combo box show this information as follows. I.e
I am creating a CAD Drawing database / Distribution list. I can only seem to distribute one drawing i.e single field to one person.Is there a way to have multiple distribtion on one field without creating multiple distribution fields?
What I have is a database which contains Drawing Numbers - I need to create a report that shows where the drawing has been distributed to, with it's current revision status and the date is was sent.I am having trouble trying to use multiple revisions and mutiple people in the distribution list with one drawing.
I have a Multiple Value Combobox that I have linked to one of my forms and I am trying to write some vba code that will allow on update, "if a certain item is clicked open up a different form". All i am having trouble with is referencing an item in the
Code: If Me.Software.Column(1) = "Lawson Prod" Then combobox DoCmd.OpenForm "Lawson_Roles_Groups_frm", acNormal, , "EmployeeID = '" & Me.EmployeeID & "'" Else MsgBox ("It worked") End If End Sub
This code gave me no error but it wont read that "Lawson Prod" is selected.
I have multiple fields on a form, does anyone know how I can make them unvisible without writing 30 times .visible = false.. Someone told me I could use the tag property.
I'm creating a database where there will be multiple combo boxes on a form. When a user chooses an option from the first combo box, I want the available choices in the 2nd combo box to be reduced and so on.
I thought I'd create a navigation table so the first column has multiple occurances of each option, but then the second column has the available choices for the first option etc. Then, I thought I'd use the chosen value in combo box 1 and filter my navigation table depending on the result.
However, the field doesn't appear to be storing the value. When I set up the query on the combo box to select distinct navigation.[cause] from navigation where navigation[type]=forms!form name[type] it doesn't work.
How do I allow the user to select more than one answer in a combo box? It is a drop down menu with several choices. I'd like the user to be able to select more than one if desired and all choices would display when queried. Thank you much. :)
