Hi,
Does anyone know if Access has a built-in control that allows users to scan the directory structure of their PC? Similar to the DriveListBox and DirListBox controls in VB6? If so, how might I get access to it?
Thanks
Davemere
My workaround was to temporarily map the URL to a vacant drive letter on the local machine, then copy the file over, then drop the mapped drive again. A bit clunky but doesn't incorporate much of a delay and this download only has to happen once per day.
The good news is, the file download / copy now works every time. The bad news is that removing the temporarily mapped drive after the copy has taken place, doesn't and I can't figure out why.
Here are the functions I use to map / unmap the drive :
Code:
Option Compare Database
Option Explicit
Private Const RESOURCETYPE_ANY = &H0&
Private Const CONNECT_UPDATE_PROFILE = &H1&
Private Const RESOURCE_CONNECTED As Long = &H1&
[Code] .....
I have separate functions to check existing drive mappings on the local machine and thus determine an appropriate vacant letter to use for the temporary mapping - they work fine.
Unfortunately the UnMapDrive function returns False (even though I switch the active drive to C: and force the connection to be cancelled with the fForce flag) So the mapping always remains on the users profile.
I don't want to permanently map drives on the users' profiles, just briefly for the purposes of this daily file download.
Does anyone know if I could put the runtime and an mdb on a thumb drive and run it from anywhere? Or does install stuff have to happen... :confused:
View 1 Replies View RelatedHello,
I have an exrternal shared drive "E:"where I put my be files (which are constantly accessed by users with fe's from different terminals). Everytime
I reboot the computer that I am working on (where the external drive is), I have to set up the permissions of the shared drive "E:" all over again, otherwise other computers have no access to E. Is there a way that I could
fix this and not having to set permissions every time I reboot my computer?
For some reason, the permissions are lost.
I have a db on a network drive and the performance is terrible, it runs fine on my local machine. How can I make it run better? The db is only 2 megs so I figured it would be ok, but since my forms have numerous queries within them, performance stinks.
View 13 Replies View RelatedIs there a way to verify the drive that an FE is opening from and then close if it is not where is should be?
I have a frontend that gets copied to each users C: drive by a .bat file. However, some just don't care about rules and proceedures and continue to open the frontend on the network drive. Since they map their drive to a specific letter drive for the BE that is where they are opening the FE from.
Thanks
Rich
Can I keep my queries in the C drive and execute it against tables that are in the LAN network drive ? Right now the queries are also in the netowrk drive. So each time when I refresh the data into C drive, I have to import the queries too.
Is it possible to keep the queries in the C drive and execute against data in the netowrk ? Please let me know.
Thanks in advance.
Hello all:
I have the following code to retrieve doucments:
strPath = "G:CorpCustomer Files"
Application.FollowHyperlink strPath & "" & textbox1 & "-" & textbox2 & ".doc"
This works fine from my computer because the shared drive on my computer is saved on the G drive.
I tried using the code from a coworker's computer, but got an error because her shared drive is : "X:CorpCustomer Files"
Basically anyone can access the Corp server through any drive depends on how it was mapped.
How do I get around this so that it works from any computer as long as the user has the Corp share drive?
Thanks much.
What I have is a bunch of files located in another Drive (PDF). I would like to link to them by id number from access.
Is this possible?
Hi.
I have been searching previous threads and the help file and got half way, but have got stuck.
I want to copy all files from a floppy disk to a drive on a directory on a server. I can check to make sure the directory exists and if not, can make it. All I want to do is copy all the files from the floppy disk drive (A drive) to the direcory I have just created.
I got this from the help in access:-
FileSystemObject.CopyFolder "c:mydocumentsletters*", "c: empfolder"
but can't get it to work......is this the way I want to go?
Can anyone help?
Thanks.
Frank.
I have an MS Access database that sits in the users local area e.g. C:Users....
I have the following code which will open a user guide on a server shared by all users.
Code:
strFilename = GetUNCPath("T:") & "19_InformaticsInternal Offer Transfers" & "Utility User Guide.doc"
Users have different drive letters for the server name. In my case it's "T:" but for others it may be"S:".
Is there any code which would determine what drive letter each user has? The server name is
denasvf1acorpHR_GLOBAL_1HR_Shared_Service_Data
I was just wondering how many users Access would be able to handle on a split frontend and backend database? The backend will be on a network drive and the frontend will be installed on each workstation. My database is pretty simple with no relationships if that matters. Also using Win7 and some users will have Office 2010 and others will have 2013.
View 2 Replies View RelatedI have my database connected to a network of ten computers. I recently switched my linked tables from a Mapped Network Drive to using the actual UNC path \computerfolderdatabase.mdb
My users have started to notice it takes longer for the database to connect in order to log in. Once they have established the connection, the data transfer speed seems to be normal.
Is this to be expected? Any suggestions to speed things up for login? Or is this the downside to using UNC?
~Scott
does anyone know if it's possible to "install" the runtime version of access 97 (we do have developer's edition, so can distribute the run-time version) to a thumb drive so that it would run without having to install it on each computer that one was going to use the thumb drive on - is there any add'l software that would make this possible/ - the application is for figure skating clubs - with distribution of up to 1000 copies - the idea is to distribute them to member clubs and various officers could use the application and exchange up-to-date data by passing on the thumb drive - this also would hpefully avoid all installation problems with pc's having various versions of access already installed, etc. - thanks for any suggestions- jim
View 6 Replies View RelatedI have seen some API that gets the serial of the hard drive, but this information is not unique and changes when the volume is formated.
Does any one know of a way to return the orignal manufucture's information/serial which is unique(GUID) to the volume.
Any Idea will be highly appreciated.
I've created a database on put it on a shared network drive. I have several people who will need to use this database but I dont want some of them to be able to edit the database in anyway.
Ive tried creating individual user accounts for the database but I don't think I'm grasping how the security works.
When on my machine I'm promted for a username and password but when on someone elses machine they can open up the database with full access.
How do i create individual user security accounts on a database I want to share on a network drive?
I was using the database when there was a network error and I had to close it. When I tried to reopen it I got the error message: Record(s) cannot be read; no read permission on 'MSysAccessObjects'. I logged off the PC and logged back on various others, but keep getting the same message. Can anyone tell me if this is terminal or is there a way around it. I do have a backup, but it's a few days old and a lot of work will need re-entering' so any help would be appreciated!!
View 1 Replies View RelatedWould having Microsoft Access 2002 and 2003 on my hard drive cause me to have error with my code?
View 4 Replies View RelatedAs the thread title suggests, my problem is that I have a database that will not open via the mapped drive. There are other databases stored on this drive that open fine so it is only the one database that is causing me a headache.
Any suggestions as to why only this one database would be having this problem and any ideas on how to resolve it would be greatly appricated.
Thanks
I'm trying to create a database that totally resides on a portable drive.
My problem is linked tables become broke as the drive letter changes.
I am fairly new to Access, So will Apologize in advance.
Drive:
Main.mdb
Folder
Linked.mdb
Should it look Like this when I link:\FolderLinked.mdb
again I Apologize, If this is really simple.
I've saved my Access files (as well as my Word files) to an external hard drive. I can open any Word doc from the hard drive, but when I try to open an Access file, it gives me the following error message: "can't find Language DLL msain.dll". What does that mean, and how can I fix it so that I can open an Access file from the hard drive?
View 1 Replies View RelatedHi:
I have a front-end and back-end database.
Front end is at //fserv/database
back end is at //fserv/database/administration
I have sent front end path to users and they can bookmark it to find front-end. When I linked to the backend in the administration folder I had the path mapped to drive T:
Problem is the users do not have this same mapping to drive T: They may have other paths already mapped to that drive.
The users are getting the message:"t: est.mdb is not a valid path. Make sure the path name is spelled correctly and that you are connected to the server on which the file resides."
Is there anyway to link the the backend tables using just a path like:
//fserv/database/administration
Thanks in Advance!
Steve
Does anyone have any experience with placing a multi-user back-end access database on one of these inexpensive "external network hard drives"?
I have a situation where I'd like to share my database with multiple users, but the corporate IM rats have pretty much eliminated all means of allowing us lowly employees of doing that with their network. We have no file server. We do have sharepoint services, but we only have Access 2000, which as far as I know is not capable of exploiting the sharepoint/xml back-end database features. Also, no one in the office here can share a directory on their workstation because they won't grant us administrator priveledges.
So thats how I came upon the idea of buying or creating cheap (<$250 USD) wireless network hard-drive on which to put the back-end. I'm mainly interested in knowing if it will work, and that the performance isn't going to be absolutely pathetic. I'm only looking at having 3 or 4 users at any one time, and the entire database will only house a couple thousand records.
Alright, so my pride and joy and departmental savior database has been fully implemented and people are so pleased with it that they *all* want to use it at the same time. Initially, I made it custom for three peoples' UI preferences, but since it's such an intuitive design, other staff now feel comfortable using it instead of passing the work down the line to the one person who knows how to use that "newfangled thing".
A couple years ago, I used FMPro and allowing for multiple users at once was an annoyingly complicated process dealing with permissions and rights and accounts and passwords and yadda yadda. Is it any easier to set up in Access? Does anything special even need to be done to allow for multiple simultaneous users?
hi all
i want to export a data base to a flash stick.
Rather than export the database to a predetermined drive letter (because all computers are configured differently), I'd like the windows "my computer dialogue" window to appear so that the user can choose which drive to save to.
Any idea how I can do this?
Thanks
I need to map drive on server which is password protected..so i used this:
Code:
persistent = false
set objNetwork = WScript.CreateObject("WScript.Network")
objNetwork.MapNetworkDrive "driveletter:", "serversharename", persistent, "username", "password"
but I get an Error 424 'object required'
in this:
set objNetwork = WScript.CreateObject("WScript.Network")
some other method to map password protected drive