On one of my queries, the dataset is shown with a * as the last record.
There's nothing in it apart from blank data but it is appearing on my forms.
All my other queries do not seem to have this.
Is there a setting to stop these from appearing ?
I have a form with a search box, Its UNBOUND called ID . Everytime I search for an ID number it shows no results, However I know there are entries in the table. This is the code I am using :
Code:
Private Sub ID_AfterUpdate()
If (ID & vbNullString) = vbNullString Then Exit Sub
Dim rs As DAO.Recordset
Set rs = Me.RecordsetClone
rs.FindFirst "[Id] LIKE ' " & ID & " ' "
[Code] ....
I am assuming I need to add something to search for auto numbers but i don't know what!
I have a table with some combo selections with row source No;Yes, bound column 1, column count 1, and default value "No", limit to list set to yes, required = yes, allow zero length = no.
When I create a new record though, all of the combos show 0, and I have to select No or Yes manually. The requirement is that No is the default value..
Lots of thanks in advance,
Aidan
I have a table that is showing #Deleted in several fields, not all of them. When I select the record and try to delete it I get the message that the record id deleted. How do I remove this record?
View 3 Replies View RelatedThe following code browse from one form to another and shows the record details I select in the first form which is what I need, however, the problem is it only shows that record and will not allow me go to next or previous records when pressing NEXT or PREVIOUS by saying this is the First Record or this is the Last Record.
Anyway to modify it to allow me navigate to other records.
Dim txtJobNumber As Integer
Private Sub Job_Number_DblClick(Cancel As Integer)
'Store Job_Number in txtJobNumber variable and display
message to show value.
txtJobNumber = [Job_Number]
[Code] ....
So, let's say I have a table named FLOWER_SHIPPING that has field:
Date [Date]
Flower_name [Short Text]
Amount [Long Integer]
Sender [Short Text]
Address [Long Text]
Then I created a form named MAINF with FLOWER_SHIPPING as its RecordSource. The form only has one TextBox: Date.
Then in MAINF, I created a subform named SUBF with FLOWER_SHIPPING as its RecordSource, in Datasheet View. It shows all fields in FLoWER_SHIPPING as it is.
The link between MAINF and SUBF is Date.
I want SUBF to only show record based on the Date chosen in Date TextBox in MAINF. So far, yes it did what I want. But with problems:
1) [SOLVED] SUBF does show record based on the Date I've chosen in MAINF's TextBox Date, but it ALWAYS ALSO shows the first record on the FLOWER_SHIPPING table. And the date in the first record always changed into the Date I just input in the TextBox Date in the MAINF. Automatically.
Example: I chose 6/22/2013, and there are 2 records with that date. the SUBF will show 3 records: those 2 records + the first row of FLOWER_SHIPPING with its Date automatically set to 6/22/2013.
2) When I chose a date in MAINF, I have to click everywhere in the SUBF so that it will refresh its content. Can I have it refresh automatically everytime after a date chosen?
I have a listbox with checkbox's based on a table.
The listbox reflects everything great, except it shows an extra checkbox at the end of the list that does nothing.
I think this is the "next record" from the table, but I don't want this to show. How do I hide or get ride of this extra checkbox?
Hi There,
I have got this form, consisting of 1 form (that needs to add a new record to a table everytime) and 1 subform, that needs to show the last three records of the table.
My problem is that I cannot get it right, now both forms (form and subform) are showing the details on just one record. If I open my subform it shows me all the records of a table, but in as soon as I view the form as a subform I shows me only one record.
Any help is welcome, I attached my db, just in case....
I have a form that using "Query A" as data source. The Form need add (edit) a field value before save that Query Result to another Tabel. Is it possible to do that?
The PROCESS simply like below: Tabel A --> Query A --> Form -->Edit value a field -->Save to Tabel B
if it is possible, are there some requirements that have to be fullfilled?
I have record like below:
id s q
1 11 11
2 14 15
I want to sum record 1 and record 2 and put them in next record.
I'm trying to use the job number field, which is my primary key in my table, to auto assign the new job number on my Forms. Currently, I have to enter a new job number manually, and it has to be unique because that is the way I have it set. I can't use autonumber because Access does not allow you to select what number you would like to start from, which would not play well with my current job numbers.
Basically I need Access to get the job number from the last record and add 1 to it, or just find the last / highest current job number and add 1 to it.
I created a query (qryFindJob#s) that list all of the Job Numbers, but I'm not sure how to add the query results to my Form to display the Job number + 1. I created a text box, typed a simple expression in the control box to see if I was on the right path (=[qryFindJob#s]) but I keep getting a #Name? error in the txt field.
I have searched and search and I can't find the answer to this question when I thought it would be simple. Hopefully you can put me out of my misery!
I have a access 2007 split form with a series of search boxes and a query result window. Enter info into one or more of the search boxes, click search and you get the matching results in the query window below. That works fine but I want to work with the results of the query, how can I do this?
I was looking for the user to be able to select a record and then click a command button to open that record in a form. Or in another instance select a record in the result window, have the current from close and have the primary key passed to a another form which I use to open the split form.
I just can't see how to do it but I expect there are several ways. Happy to use VBA but my experience is with Excel VBA so I'm still getting used to the objects.
Thanks in advance!
I want to return the number of record with the SQL search in MS Access. I am using the following code, the expected result will be a value. But somehow, it does not give any result.
StrSQL = "SELECT COUNT(*) FROM table1 WHERE [Condition]='A' "
How do I return the count value with the search?
My boss has a form based on a rather large table with a lot of records/fields and she wants to be able to have a field where she can enter something and it will seach every record in the table and return the results in a table. How do I do this?
View 9 Replies View Relatedi want to open a report but only showing the result of one record in a sub form,
i have a field that is on all rows of the subform,[click to run] and what i want the user to be able to do is double click on this field and it will open the report with only the record information for that row displayed.
I already make textbox name: TbBanyak on subform footer with control source =sum([Jumlah])
I success display it on mainform with texbox control source =[Jualsubform].[Form]![TbBanyak]
how to enter/record the result to table record??
I am working with Access 2010, on vista. What I have is a query made up of two tables, one product the other inventory. (see below) query.jpg
In the product table i have a field called "minimum reorder level". In the inventory table i have two fields one called "number in stock" and "number on order". What i want to happen is "number on order" to be filtered by the result, if the "number in stock", is less than "minimum reorder level", if it is, have the result placed in the "number on order" field. EG. if the "number in stock" = 2 and the "minimum reorder level" = 5 then 3 would be placed in the field "number on order" and only the second record from the query would be visible (see below) Query result.jpg The result of this would mean that the field "number on order" would be populated with the result and the and query would also use this to filter the record.
I want to add a number to my results within a query depending on the month and how many results. For example I have 10 results in my query 3 from January, 5 from March and the rest from April. The 3 from January would be 1,2,3. The five in March would be 1,2,3,4,5 and so on. Is it possible to do?
I'm using access 2003.
How to get this one to display in a single column.
I know how to do this wiht VBA. But, this output will need to reside on a SQL Server View. So I need a SQL language solution. If it can work in MS Access Query, it won't be too difficult to test then translate to SQL Server.
Customer Table with PK Customer_ID.
There are two tables with FK Customer_ID.
1. Table Lease1 - Has 3 Fields - the form code enforces No Fields -or All Fields. The red * indicate a Required field - These 3 are entered together.
2. Table Lease2 - Has 1 field with 0 to Many records.
Goal:
The Type shows up in a single column.
Each Type shows where the data comes from (Lease Type, Surface Owner, Mineral Owner, or Hz Lease Type)
Challenge:
Lease1 table has 3 fields that need to be transformed into a single column.
Lease2 table has 1 field to be appended to the single table.
Then, there is the column that identifies where the data came from based on the column name.
1. I created a table that contains information about people and their details (mainly numerical info).
2. I created a form containing a command button and a label.
3. I have written a VBA script under the button so that when the button is pressed, the result of the calculation appears as the caption on the label.
My problem is...How do I get the script to run so it does the calculation for every record and places the result as a field in a query.
I am building a Inventory Management Application for Tyre Shop. I have SaleMainTbl and SaleDetailTbl both used for preparing daily sale summary. I have Mainform based on SaleMainTbl with TxnDate and Total Amount (Sale) and the TxnDate is in one to many relation with SaleDetailTbl. FormSaleDetail is multiple row(continuous) form that makes billwise summary of each day having -TxnDate--BillNo--ItemSold--Company--Qunatity--Rate--Amount fields. I have inserted this form in FormSaleMainTbl.
So FormSaleMainTbl is Main form and FormSaleDetail is subform. TxnDate in FormSaleDetailTbl is automatically taken from SaleMainForm. I have further added text boxes in Main Form to show company wise sale for each day for which there is a query build one for each company that takes the currently loaded date from FormSaleDetail and calculates the Sale (Sum) of each brand (Company) of Tyres. All these objects are working very fine. However I have to close the MainForm and reopen it for result of query to appear in the appropriate text box in Main form.
Is there way to do this as soon as record is entered or at least at the end of completing the entry of each days sale transactions without closing the form. So the gist of the problem is realtime display of query result in text box on a form or updating the form screen immediately on updating any record or at the most after completing the updating of form but without having to close the form.
I there is no result in query, I need the default result zero in my form field. I only use query wizard to create queries.
View 5 Replies View RelatedActually I have a small form of customer details, that i made in excel, the field name mention below,
Customer Details Table
First Name
Last Name
Contact Detail
Address Detail
Postal Code
Last Purchasing Date
Remark
Now i want to make a search form like this
Search Form
Contact Details
& the result is show which I insert the contact number.......
I have 2 cascading combo boxes which control what appears in my subform (AuditYear,Company).
Once I select both, sometimes the subform info shows up and a while later I try again, and it doesn't. Then I try some other AuditYear + Company, then THAT shows up...then I try again, it doesn't.
Any ideas?
I just added my third record to my new form and it is gone. However, it shows up in the table. I think it is because there are two record selector bars on my screen. I have two subforms and each one has a record selector bar on them and then there is an additional bar at the bottom that is like for my main form, which is blank. (I don't use the main form. I just have subforms over it.) I think the second record bar is goofing things up? And where is my record I just added. It only shows as two records total. Should I get rid of the subforms record selector bars?
View 1 Replies View RelatedI am getting 2 problems what I am trying to do is depending on the user logging in I want to open form (Aform) on specific record for that person ID. However where Y=1 I am getting a popup asking for AForm ID and where Y=2 I am getting run time error 3075 Syntax error (missing operator) in query expression.
Code:
Private Sub Command6_Click()
If IsNull(txtUsername) Then
MsgBox "Invalid username"
Exit Sub
End If
If IsNull(txtPassword) Then
MsgBox "Invalid password"
[Code] ......