Using Parameters In HyperLink Address
Feb 21, 2007
Access 2003
I've inherited an Access Application which is basically a Front End for calling Integration Service Packages - for all intents and purposes it could be stored procedures or anything other executable. A number of forms have hard coded links that point to a particular executable on a network drive.
With regards to this the UAT packages will live in a different directory than the DEV code so is it possible to parameterise the link e.g. could W:CAT DevelopmentAutomation PackagesOTCOptionsImport.dtsx become W:PARAMETERAutomation PackagesOTCOptionsImport.dtsx - if so then how do I create a parameter, capture it and use it in the link above.
The whole project is lacking the use of parameters at an ACCESS level and Integration Services level but due to time constraints there is no scope to major overhaul the system design.
I am a developer with many years of experience but my Access knowledge is limited so any pointers would be helpful.
View Replies
ADVERTISEMENT
Dec 19, 2005
Hello, I'm trying to add a hyperlink to my form that changes to a different location when the record changes.
View 1 Replies
View Related
Aug 31, 2013
I'm using Access 2007.
I have a customer table attached to a form.
I want to put a command button next to the customer's email address so that the user simply presses the button and Outlook will be started with the customer's email address automatically inserted from the table.
I am playing around with the Hyperlink Address function and whilst this seems to do what I want, I can't figure out how to get the customer's email address from the tabel and insert it......
View 13 Replies
View Related
Jul 1, 2015
I have a form with a textbox with the "LinkedIn" profile address that I want the user to be able to pull up when they click a command button. It works, except that the link opens twice in two tabs in the browser. I've checked over the code for the whole form, and this code is only being run from the click event of the button, so why would it open the same tab twice? Here's the code:
Private Sub cmd_Click()
Dim ctl As CommandButton
Dim txthyper As String
Set ctl = Me!cmd
txthyper = Me!LinkedIn
[code]....
View 3 Replies
View Related
Apr 14, 2012
I have a command button on a Web Mutli-Record form that is using a "= [Report_URL]" value within the Hyperlink Address property. This all seems to work other than the fact that when the link popups up it has a "#" on either side that basically makes it an invalid address. How do I get rid of the # signs to get the web address popup in the URL when a user clicks on the Command Button that is associated to the row the record is on.
View 4 Replies
View Related
Sep 8, 2014
In the Access Table, how does one Find and Replace part of the hyperlink if the Text to display is different?
Example of Hyperlink Editor:
Example of Find and Replace
In other words, I'd like to find FAKESERVER and replace it with C:Users in all 1000 records. Is there any possible way to do this if there is Text to display?
View 4 Replies
View Related
Sep 17, 2012
I have a form where the user puts in a email address, eg test @ myserver.net
So the link opens a new mail it has to be prefixed by mailto:
How can I automatically replace the address the user enters with the format mailto:test@myserver.net
View 3 Replies
View Related
Jun 19, 2007
Hope you can help!
I have an access table which lists a customers address, however, if the customer has a temporary address it will also list that on a separate line -
CustID Address Type
1234 5 The Street P
1234 12 The Street T
2345 13 The Road P
3456 12 The Avenue P
Where P = Permanent and T = Temporary
I want to set up a query to show the permanent address where there is only one address, but where the customer has a temporary address also, I want to list the temporary one instead.
Thanks
View 1 Replies
View Related
May 29, 2014
i have thousands of data records with hyperlinks that are correct. Each data record shows the actual link (google.com, foxnews.com, espn.com, etc.). However, i want to change all of the records to just say "link" instead of saying espn.com, etc. How can i do this automatically without having to manually right click, edit, and changing the text to display?
View 6 Replies
View Related
Aug 9, 2006
I have a form bound to a table which stores contact info for a person. I have two controls that are email_address and website_address. I set them both as hyperlinks.
So now when the user clicks on the email_address Outlook opens a new message with an email_address in the To field. (I had to use a function found on this forum to replace the "htttp" with "mailto" on AfterUpdate event in order for this to work properly.) However, now trying to add some other features to my DB I ran into problems listed below. I wonder if I should have rather left that control as Text instead of Hyperlink, and use the DoCmd.SendObject on doubleclick event instead of using the above solution.
How people usually store email addresses and enable emailing on click?
The problems I ran into:
1) My main form is in popup mode and therefore right click on the hyperlink does not give an option to edit the hyperlink
2) I copied a function from this forum which gathers a list of emails and sends one message to the emaillist. However, my email list instead of generating as:
email1@a.com; email2@b.com
it generates as:
email1@a.com#mailto:email1@a.com#; email2@b.com#email2@b.com#
I guess I could extract the email using vba (not sure how), but I still don't know how to solve issue number 1. So maybe it is better to siwtch the field to plain text and forget the hyperlinks?
Thanks,
Mariusz
PS. What procedure on double click would open a default browser, since I also have to deal with web addresses and thought of turning them into text controls?
View 1 Replies
View Related
Aug 29, 2005
I am completely stumped on this one. I have a database where we track IP Addresses and I just want to sort by IP...should be simple, I'd think.
With these 5 IP's, I'd want them in this order:
1.2.3.1
1.2.3.4
1.2.3.7
1.2.3.9
1.2.3.10
1.2.3.17
1.2.3.21
But it sorts in this order:
1.2.3.1
1.2.3.10
1.2.3.17
1.2.3.21
1.2.3.4
1.2.3.7
1.2.3.9
Is there anything I can do to fix this? I want it to see each number as a whole, for example "10" instead of "1" and "0"
Much thanks.
View 5 Replies
View Related
Jun 29, 2006
I have an address all in the one line at the moment. My front end has been programmed this way. Now I have to split the address into 3 or 5 lines. The address looks like this:
3 Thorn Road Edinburgh Scotland G68 2AA
The post code is in a seperate field so that makes it easier for me.
This is the query i have.
UPDATE Clients SET Clients.Address1 = Left([Address],InStr([Address],",")), Clients.Address2 = mid([Address],InStr([Address],",")), Clients.Address3 = Right([Address],InStr([Address],","));
If it was looking for this address: 34 Thornwood Road, Kilmarnock, Aryshire. It would produce
Address1 = 34 Thornwood Road, = Correct
Address2 = kilmarnock, Ayrshire ,= Should be kilmarnock
Address3 = nock, Ayrshire = Should be Ayrshire
tried all different ways and it meeses up can someone point me in the right direction.
Thanks
allan
View 3 Replies
View Related
Mar 21, 2007
I have a table that has about 5000 street addresses (ex. 1234 your st.). I want to get the all the characters until the first space. So for (1234 Your St.) I want to get 1234 for W1234 St I want W1234. Is this possible?
View 1 Replies
View Related
May 9, 2005
Hi Ive got a form that has customer details at the top i.e name, address etc. and then a products subform. Once I have chosen a customer it then automatically fills in the address fields and i can then add products to the order. I then press a button which produces a form showing the customer name and address and the products they ordered. I want to be able to have it so I can add a tempory address if the customer wants the goods to be shipped somewhere different to there normal address. How do I do this without adding another address into the database?
View 6 Replies
View Related
Aug 14, 2005
I have two addressess, primary and secondary.
I would like to make an option button on the form that indicates (when selected) which address to use for mailings? Although, 9 times of 10, mailings are sent to the primary address, but there are those exceptions...
Can someone direct me to an example code to perform this?
View 1 Replies
View Related
Oct 12, 2006
I have a form "frmsend mail" whic have fields "To" and "Cc" i want to have a address book in the access itself having same functionality as outlook i.e it should add new email id to the address book, prompt the email id,etc.
How to do tht.
thnxx
View 7 Replies
View Related
Dec 14, 2006
Hi all,
Just a little advice on how to approach a problem.
I have some simple address validation in an unbound form. When the user types in a suburb, I have a DLOOKUP function that returns the appropriate postcode for that suburb.
My problem is that most suburbs have more than one postcode (standard and PO BOX).
How can I return both values?
My intention is to then allow the user to select the appropriate postcode.
Thanks
Robert
View 6 Replies
View Related
Dec 11, 2004
What is a email address (in a PM)
Jabez
View 1 Replies
View Related
Feb 4, 2005
any one have experience with address verification in access through the US postal service? any good resources? Examples?
View 3 Replies
View Related
Oct 20, 2005
I have a form for all my clients, and currently there's a separate field for each part of the address. This does not make it easy to cut and paste an entire address block. I therefore created an unbound text box with the control source as:
=[FMT-NAME] & Chr(13) & Chr(10) & [Pref1] & Chr(13) & Chr(10) & [Pref2] & Chr(13) & Chr(10) & [PrefStrt] & Chr(13) & Chr(10) & [PrefCity] & ", " & [PrefState] & " " & [PrefZip]
This works ok, but if someone doesn't have anything in the fields [Pref1] or [Pref2] it leaves blank lines. Is there a way to code it so that I can have a complete address block? Thank you.
View 4 Replies
View Related
Oct 2, 2006
Hi - I am importing information into my database of customers names and addresses. The country part of the address comes in 2 letter code - eg AU = Australia, IT = Italy etc. What I would like is to change these to the actual country name. Is there a neat way of doing this? I am thinking doing a whole line of if then, but it all looks really messy.
Thanks
Fiona
View 1 Replies
View Related
Oct 12, 2006
I have a form "frmsend mail" whic have fields "To" and "Cc" i want to have a address book in the access itself having same functionality as outlook i.e it should add new email id to the address book, prompt the email id,etc.
How to do tht.
thnxx
View 1 Replies
View Related
Oct 21, 2005
Hello all,
I have a field called "Name", which for example is: "Johnny Briggs".
I want to be able to show the exected e-mail address, which would be: "johnny.briggs".
So, all I need to do, is take out the space, and replace it with a full stop.
Should be easy - but I can't figure it out!
I don't really need to store the address - so doing it in my query is preferable.
Thanks in advance!
View 2 Replies
View Related
Feb 22, 2006
having a prob with the above. not sure what is the best way to find out what comes after the @ in an e-mail address.
For example, if i was to have the following e-mail address@
firstname.lastname@myemail.com
is there an expression to use to shrink the above so that i can only see the "myemail.com"?
thanks for your help.
View 1 Replies
View Related
Mar 21, 2006
Problem: Turning an address column containing a comma into two or three address colums containing no comma
I have a database with the structure:
company
address
town
postcode (zip code)
The present address column contains one of the following (I give examples)
-76 Nelson Street
-99 Bush Lane, Waddington
(where Waddington is a village, or quarter of the town named in the town field)
-Nixon House, 150 Clinton Street, Hareswood
-sometimes there might be a redundant comma at the end of the string e.g.
99 Bush Lane, Waddington,
-very occasionally the address field is empty (when the record is still incomplete
----------------------------------------------
We now have to interact with another company and its software, which takes commas as field delimiters. We therefore have to get rid of all commas in our address field.
I have therefore revised our structure so that it now is:
Company
Addr1
Addr2
Addr3
Addr4 (which contains what was formerly 'town')
Postcode (zip code)
Now I must distribute the contents of Addr1 into Addr1, Addr2, Addr3
and eliminate the commas in the process.
Our database has 4000 records. Therefore doing this manually is prohibitively expensive and takes far too much time. We need the revised database virtually overnight.
My knowledge of Access is fairly limited, but it is ***I*** who has to solve the problem.
Request
------------
Is it possible to do this automatically?
How would you proceed, which steps?
If an Action Query has to be used - well, I have never used an Action Query before (but I have a hefty book about it = "Willing to learn - fast").
If there is a simple formula to be entered into the Action query, could someone please give me the formula?
Thanks for your help.
Adrian
View 5 Replies
View Related
May 8, 2007
Can't find anywhere else to post this so...
When I joined this forum last month, I attempted to enter my current email address and I got a message box that my email address had been banned. I tried several times to enter the correct (current) email address and each time was told that email address had been banned.
I attempted to contact 'jon@access-programmers.co.uk' on the 13th and 27th of April with no response.
As it is right now, this forum only recognizes my old email address instead of my real email address as that's the only way I could continue the join process.
Can anyone:
1. tell me why my current email address has been banned
2. help me get my correct information entered?
thanks.
View 2 Replies
View Related
