[Microsoft][ODBC Driver Manager] Data Source Name Not Found And No Default Driver Specified
Oct 19, 2006
trying to install sql server2005 on a windows 2003 server box.
getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.
here's the history of the installs on the server:
wanted to test a 2005 upgrade so:
1) installed sql server 2000 then sp4 then restored some databases to it - all OK
2) tried to upgrade to sql 2005 but ran into problems and left it at that.
had a disk drive crash on the d drive so lost the installs but not the operating system
when the drive was replaced, left alone for a while
then wanted to test a straight 2005 install
1) removed the broken 2005 attempt
2) removed the 2000
3) installed 2005 and got the error on the subject line:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.
Thanks!
Dan <><
View 17 Replies
ADVERTISEMENT
Feb 4, 2008
i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup
Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
i am not sure yet if this is an issue with sql, php or phpbb
php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error
phpbb detects all the required server settings and sees that i have ms sql installed
any suggestions on what that error means or how to go about configuring odbc driver?
probably a simple issue. but i'm still new with sql stuff
View 1 Replies
View Related
Feb 26, 2008
Hi SQL Server Team,
In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.
Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by " ".
rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);
after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.
C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm
Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);
Also following error message was encountered during execution of SQLConnect command.
/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/
Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);
Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.
Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.
An early reply will be appreciated.
Cheers & Regards,
Saresh
View 1 Replies
View Related
Mar 12, 2007
I know this may be a simple problem, but here it is:
I have SQL server express installed on Windows 2003 server (Testing) it works fine;
When I move it to my production server (Windows 2003) I get the error message"Data source name not found and no default driver specified "
The system DSN in ODBC connections works fine, or at least completes the test ok.
My application is written in Classic ASP
PLEASE HELP
Thanks
View 2 Replies
View Related
Oct 30, 2006
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DBConnection.open() +12
ASP.global_asax.Session_Start(Object sender, EventArgs e) +35
System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182
System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
View 8 Replies
View Related
Oct 28, 2004
Hi,
Please help share with me if you know the version compatibility matrix of Ms SQL Server, ODBC driver (sqlsrv32.dll), Driver Manager (odbc32.dll) and ODBC API spec. For instance, how can I know Ms SQL Server 2000 can work with which version of sqlsrv32.dll, a particular version of sqlsrv32.dll can work with which version of odbc32.dll and a certain version of sqlsrv32.dll/odbc32.dll conforms to which version of ODBC API spec (e.g. 3.5).
Any help will be appreciated.
Thanks,
vtluu.
View 1 Replies
View Related
Dec 10, 2003
Hi Everybody,
On localhost this application works fine but when I put on remote server. I am getting following errors. For both localhost and server, I am using same remote sql 2000. I will appreciate any help.
Thanks,
Arif
Server Error in '/' Application.
--------------------------------------------------------------------------------
ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: Microsoft.Data.Odbc.OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[OdbcException: ERROR [42000] [Microsoft][ODBC SQL Server Driver][SQL Server]Line 1: Incorrect syntax near ')'.]
Microsoft.Data.Odbc.OdbcConnection.HandleError(IntPtr hHandle, SQL_HANDLE hType, RETCODE retcode) +27
Microsoft.Data.Odbc.OdbcCommand.ExecuteReaderObject(CommandBehavior behavior, String method) +838
Microsoft.Data.Odbc.OdbcCommand.ExecuteNonQuery() +80
Calgary.venues.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootCalgarySitevenuesvenues.aspx.vb:32
System.Web.UI.Control.OnLoad(EventArgs e) +67
System.Web.UI.Control.LoadRecursive() +35
System.Web.UI.Page.ProcessRequestMain() +731
View 5 Replies
View Related
Feb 18, 2004
Hi !
I'm trying to load data in sql server table with Bulk Copy Program (BCP).
I have the following errors.
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = 22001, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]String data, right truncation
SQLState = S1000, NativeError = 0
Error = [Microsoft][ODBC SQL Server Driver]Unexpected EOF encountered in BCP data-file
In my File to load i have this :
Hello1¤Hello2¤17/02/2004
TOTO1¤TOTO2¤17/02/2004
TITI1¤TITI2¤17/02/2004
My definition table is :
create table tab1
(
TABLE varchar(20) null ,
PK varchar(50) null ,
DATE datetime null
)
go
I launch bcp with this command :
bcp.exe "BASETEST.dbo.tab1" in "c: ab1.out" -c -CRAW -t¤ -m100 -Smyserver -U -P -o"c: ab1.log"
The file "table1.out" is making with a C program.
Do you have an idea ?
Thanks.
View 1 Replies
View Related
Oct 28, 2015
i am on a 2008r2 machine and need to add a microsoft excel odbc driver but its missing.
View 2 Replies
View Related
May 12, 2008
Hi all,
We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:
Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.
Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??
Thanks and Regards,
Nirmal
View 2 Replies
View Related
May 22, 2007
odbc_pconnect() [function.odbc-pconnect]: SQL error: [Microsoft][ODBC Microsoft Access Driver] System resource exceeded., SQL state S1001 in SQLConnect
we got the error with access 2000 database and PHP as prog. language .
we created dsn for the connection.
reboot solves the problem. but we need another solution better than this.
View 7 Replies
View Related
May 13, 2007
Hi,
I am using VB.NET 2005 and set up an ODBC connection via ODBC.ODBCConnection to a MDB database. Therefor, I use the "Microsoft Access ODBC Driver (*.mdb)".
When I set up a ODBCCommand like "ALTER DATABASE..." or "CREATE TABLE..." and issue it with the com.ExecuteNonQuery() command, I get an error from ODBC driver, that a SQL statement has to begin with SELECT, INSERT, UPDATE or DELETE.
How can I use DDL statements via ODBC?
I would appreciate if you could help me to use ODBC for that - no OLE, no ADO.
Thanks for help!
Regards,
Stefan D.
View 14 Replies
View Related
Apr 6, 2001
I have a new MS SQL 7 server with patch 3.
I am getting this error from a MS SQL client pc, whend I use the SQL server Query analyzer, both logon options "SQL Server or Windows authentication"
I even tried the SA account.
here is the error I get.
MSG 6 Level 16 State 1 ODBC SQL Server Driver name Pipes specified SQL Server
not found.
Any help will be apriciated thank you.
Jorge
View 1 Replies
View Related
Feb 15, 2004
Hi,
Do we have Microsoft ODBC Driver for DB2?. If we do then how we can get?.
Thanks,
Ravi
View 2 Replies
View Related
Nov 26, 2007
I am testing an application that uses mysql that works 100% fine with Microsoft Windows XP on Windows Vista Premium Home Edition.
Using Vista's ODBC Data Source Administrator I have set up and successfuly tested the DSN Connection to the Database.
However, when I call the set up DSN with the application I get [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
I am using the mysql-connector-odbc-3.51.12-win32.
I have tried editing the registry DSN files - the problem still persists.
Does anybody know a way to solve this problem
View 1 Replies
View Related
May 25, 2001
Hi, I am getting this message, anyone knows what could be the reason for this. My connection to the sql server is out too.
[Microsoft][ODBC SQL Server Driver]Unknown token received from SQL Server
Thanks
Ali
View 1 Replies
View Related
May 2, 2008
Hi everyone,
I am getting the below error when I try to access the table in 2005 database through 3rd party application from the application server.
“[Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt�
This database was restored from sqlserver 2000, so the ODBC connection in the application server first was pointing to 2000 database and now its dropped and recreated to point to the 2005 database.
I dont get this error message when I do the same action from my pc.
I google'd on this error message, and I am not sure if the driver has to be upgraded or if there is anything else that I am missing here.
Thanks much.
View 1 Replies
View Related
Feb 5, 2008
Hi ,
Well i have one question regarding the Timeout . I have an SQL SERVER 2005 database and have an VB6.0 application. I have a stored procedure which inserts more than 90,000 rows from one table to another . Some times i get an exception as [Microsoft] [ODBC SQL Driver] Timeout Expired in the Visual Basic application and some times it works fine. The exception i receive within 30 seconds , but when i try the same stored procedure in query analyser , it works fine. also i have increased the timeout in visual basic , but still i get the same error.
Can anyone suggest.....
View 6 Replies
View Related
Jun 28, 1999
A developer installed a FoxPro application on my workstation and every time I connect to SQL Server 7 I get the following message:
The ODBC resource DLL(C:WINNTSystem32odbcint.dll) is a different version than the ODBC driver manager (C:WINNTSystem32odbc32.dll).
You need to reinstall the ODBC components to ensure proper operation.
I can still connect to the database and everything seems to work but I want to correct this problem. Could anyone tell me how to reinstall the ODBC components? I tried reinstalling SQL Server 7 on my workstation but it tells me that I have not selected any components, even though everything is selected. Do I need to uninstall SQL Server and then reinstall it?
Thanks in advance.
Mike
View 2 Replies
View Related
Jun 29, 2002
Hello,
When I connecting thru T-SQL, the following error was thrown.
Unable to connect to server 'SERVERNAME'
ODBC: Msg 0,Level 16, State 1
[Microsoft][ODBC SQL Server Driver] Timeout expired.
How to fix this?
regrads,
vnk.
View 2 Replies
View Related
Aug 19, 1999
I am running a query which pulls back about 200,000 records.
When I run this in ISQL (SQL Server 6.5), it runs in almost 2 minutes.
When I put it in a store procedure and run it off my ASP application, I
get this error
[Microsoft][ODBC SQL Server Driver]Timeout Expired
We've tried many things including:
1) Increased connection and command time outs in Global ASA
2) Have the ODBC driver log long Quires to a file
3) Changed Query Time out in Enterprise Manager(360 seconds) Go to
tools --> Preferences/configure -->Connection Tab
4) Changed Maximum allowed open database from 20 to 200
5) Changed resource timeout to 360 seconds from 5 seconds
6) Changed remote query timeout to 0, allowing infinite wait.
What else can we try???
Thanks for taking the time to read this
Joyce
View 2 Replies
View Related
Feb 1, 1999
Hi all,
I inherited some really twisted asp pages from another developer that crank for a long time. They used to work, albeit slowly. Now when I try to run one I get the error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e31'
[Microsoft][ODBC SQL Server Driver]Timeout expired
Short queries run fine.
IIS4 & SQL Server are on the same box. I didn't the ASP pages or the IIS or SQL server config. I did install VStudio 6.0 a while back.
Anybody got any clues?
View 1 Replies
View Related
May 29, 2002
Thank you to all who reply to this perplexing question.
Mike
Database VMFGSRVRVMFG is SQL 2000 Std.
Database NT002P_GL is SQL 7.0.
All SQL versions are at the current SP levels.
I receive the timeout message when I am in EM,
database,VMFG(database), Views, Open View, Return All
Rows. I can successfully run the code in QA. I believe I
am running up against a time parameter in SQL Server. I
have reviewed all time parameters that I can find.
However, I still receive the error. What parameters should
I be looking at? I am attempting to create a view with the
following code:
--------------
CREATE view uv_olap_adj_co_profit as
select customer.id as customer_number,
customer.name as customer_name,
customer_order.salesrep_id as salesperson,
isnull(customer.country, 'USA') as country,
'7' as business_unit,
customer_order.order_type as order_type,
uv_olap_co_profit.customer_order,
uv_olap_co_profit.work_order,
uv_olap_co_profit.close_date,
uv_olap_co_profit.period_year,
uv_olap_co_profit.gl_period,
isnull((uv_olap_co_profit.billing + ut_man_adj.billing)
*ut_fin_adj.billing,
uv_olap_co_profit.billing*ut_fin_adj.billing) as billing,
isnull((uv_olap_co_profit.material_cost +
ut_man_adj.material)*ut_fin_adj.material,
uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as
material,
isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor)
*ut_fin_adj.labor,
uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor,
isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden)
*ut_fin_adj.burden,
uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as
burden,
uv_olap_co_profit.service_cost as service
from uv_olap_co_profit,
ut_man_adj,
ut_fin_adj,
customer_order,
customer
where uv_olap_co_profit.customer_order *=
ut_man_adj.cust_order_id and
uv_olap_co_profit.work_order *= ut_man_adj.work_order and
uv_olap_co_profit.period_year = ut_fin_adj.year and
uv_olap_co_profit.customer_order = customer_order.id and
customer_order.customer_id = customer.id and
(customer_order.salesrep_id = 'LABELAIREP' or
customer_order.salesrep_id = 'OMOHUNDR' or
customer_order.salesrep_id = 'EGGERSR')
union all
select customer.id as customer_number,
customer.name as customer_name,
customer_order.salesrep_id as salesperson,
isnull(customer.country, 'USA') as country,
customer.user_2 as business_unit,
customer_order.order_type as order_type,
uv_olap_co_profit.customer_order,
uv_olap_co_profit.work_order,
uv_olap_co_profit.close_date,
uv_olap_co_profit.period_year,
uv_olap_co_profit.gl_period,
isnull((uv_olap_co_profit.billing + ut_man_adj.billing)
*ut_fin_adj.billing,
uv_olap_co_profit.billing*ut_fin_adj.billing) as billing,
isnull((uv_olap_co_profit.material_cost +
ut_man_adj.material)*ut_fin_adj.material,
uv_olap_co_profit.material_cost*ut_fin_adj.materia l) as
material,
isnull((uv_olap_co_profit.labor_cost + ut_man_adj.labor)
*ut_fin_adj.labor,
uv_olap_co_profit.labor_cost*ut_fin_adj.labor) as labor,
isnull((uv_olap_co_profit.burden_cost + ut_man_adj.burden)
*ut_fin_adj.burden,
uv_olap_co_profit.burden_cost*ut_fin_adj.burden) as
burden,
uv_olap_co_profit.service_cost as service
from uv_olap_co_profit,
ut_man_adj,
ut_fin_adj,
customer_order,
where uv_olap_co_profit.customer_order *=
ut_man_adj.cust_order_id and
uv_olap_co_profit.work_order *= ut_man_adj.work_order and
uv_olap_co_profit.period_year = ut_fin_adj.year and
uv_olap_co_profit.customer_order = customer_order.id and
customer_order.customer_id
View 1 Replies
View Related
Apr 9, 2001
Hi!,
I am running sqlserver 2000 enterprise edition on windows 2000.
When I try to run a select statement. I am encountering
[microsoft][odbc sql server driver] timeout expired
How do fix this problem?
Thanks,
Ranjan
View 1 Replies
View Related
Oct 30, 2007
I've tried every websearch possible to try and get a solution for this problem but can't.
Development Software:
SQL Server 2000
Enterprise Manager 8.0
Query Analyzer 8.00.194
Error:
When I run a mildly complex view in Enterprise Manager I get the error:[Microsoft][ODBC SQL Server Driver]Timeout Expired
after about 30 seconds.
When I copy and paste and run the exact same code in Query Analyzer the Query runs for longer than 30 seconds and runs until completion. Now my question is since this apparently seems to be an Enterpise Manager problem and not on the server end, where do I go in Enterprise Manager to change that setting? I've looked everywhere in Enterpise manager and can't find a "command timeout" setting.
Thanks!
View 4 Replies
View Related
May 18, 2004
Hello,
I installed MS SQL Server 2000 Evaluation Edition on
Windows XP Pro. I have database on the same PC. When I
am running a query(view) from Query Analyser I
get "[Microsoft][ODBC SQL Server Driver] Timeout Expired"
error message . When I am running the same view on
smaller amount of data it works.
:confused:
Could you please help me with that?
Thanks
DJ
View 3 Replies
View Related
Mar 6, 2008
Hi,
I have tried updating the DSN configure option i.e. 30000 milliseconds.
But I am still facing the problem of Timeout Expired.
I am using sql server 2005 for daily importing data from Excel Dump Files into sql server table.
Everyday the database gets updated.
The Error mentioned in Subject normally gets once a month, due to daily updation of database whether each table structure gets changed like index, trigger, etc.
Kindly let me know how to resolve this error.
Regards,
Srinivas Alwala
View 1 Replies
View Related
Aug 29, 2002
All,
I need a help from you all. I am getting this error if the users are running the application which is connecting from MSAccess97 to SQL Server 2000.
Error: [Microsoft][ODBC SQL Server Driver]Communication link failure
I would appreciate if you send me the resolution for this problem.
Thanks,
Reddy
View 1 Replies
View Related
Nov 16, 2005
I get the message Microsoft [ODBC Sql server driver]communication link failure error message in my VB 6 application with MSDE engine. This error does not happen often.
My connection string is as below.
"Provider=MSDASQL;Driver={SQL Server};Server=" & mSvrName & ";DATABASE=cnsClient;uid=uid;pwd=pwd"
Please help.
View 1 Replies
View Related
May 10, 2006
Hi,
Ive got a collection of view which piece together data from varying sources and assemble it ready for a stored procedure to squirt the data into a table.
This has worked fine up til yesterday when i had to amend one of the views to include a reference to another data set.
Essentially the data is for students and comes from our old db and our new one, each year group has different values so the views act to extract all data relevant for a child from both databases and accross all year data sets.
The problem im having is that i can get the final stored procedure to run. It ran fine the other day but since ive amended one of the views i get timeout errors wherever it's run. real problem when query analyser which has no timeout settings (apparently) times out as it means i cant run the query anywhere....enterprise manager will timeout after 30secs despite amending the query timeout setting to 600s.
so im a bit stuck, both views which the problem view is trying to combine run in under 30 seconds...when you try and combine them it times out- seems to run for a long long time.
note sure why this has started happening, from all ive read most peeps get this with EM and solve it using QA. but what if QA cant handle the query either?
heres the sql: (wont make much sense but hopefully shows that its not a complex query)
SELECT TOP 100 PERCENT dbo.StudentDetMaster.SetId, dbo.StudentDetMaster.StudentId,
dbo.StudentDetMaster.Name,
dbo.StudentDetMaster.CourseYear,
dbo.StudentDetMaster.House,
dbo.StudentDetMaster.Tutor,
dbo.PGJSProfile.[Key Stage 1 Reading],
dbo.PGJSProfile.[Key Stage 1 Writing],
dbo.PGJSProfile.[Key Stage 1 Speaking & Listening],
dbo.PGJSProfile.[Key Stage 1 Maths],
dbo.PGJSProfile.[Key Stage 2 English],
dbo.PGJSProfile.[Key Stage 2 Maths],
dbo.PGJSProfile.[Key Stage 2 Science],
dbo.PGJSProfile.[Verbal Reasoning Year 3],
dbo.PGJSProfile.[Year 3 English Autumn],
dbo.PGJSProfile.[Year 3 English Year Group Average],
dbo.PGJSProfile.[Year 3 English Summer],
dbo.PGJSProfile.[Year 3 English Year Group Average Score], dbo.PGJSProfile.[Year 3 Maths Autumn],
dbo.PGJSProfile.[Year 3 Maths Year Group Average],
dbo.PGJSProfile.[Year 3 Maths Summer],
dbo.PGJSProfile.[Year 3 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 3 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 4],
dbo.PGJSProfile.[Year 4 English Autumn],
dbo.PGJSProfile.[Year 4 English Year Group Average],
dbo.PGJSProfile.[Year 4 English Summer],
dbo.PGJSProfile.[Year 4 English Year Group Average Score], dbo.PGJSProfile.[Year 4 Maths Autumn],
dbo.PGJSProfile.[Year 4 Maths Year Group Average],
dbo.PGJSProfile.[Year 4 Maths Summer],
dbo.PGJSProfile.[Year 4 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 4 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 5],
dbo.PGJSProfile.[Year 5 English Autumn],
dbo.PGJSProfile.[Year 5 English Year Group Average],
dbo.PGJSProfile.[Year 5 English Summer],
dbo.PGJSProfile.[Year 5 English Year Group Average Score], dbo.PGJSProfile.[Year 5 Maths Autumn],
dbo.PGJSProfile.[Year 5 Maths Year Group Average],
dbo.PGJSProfile.[Year 5 Maths Summer],
dbo.PGJSProfile.[Year 5 Maths Year Group Average Score], dbo.StudentDetMaster.[Year 5 Maths Set],
dbo.PGJSProfile.[Verbal Reasoning Year 6],
dbo.PGJSProfile.[Year 6 English Autumn],
dbo.PGJSProfile.[Year 6 English Year Group Average],
dbo.PGJSProfile.[Year 6 English Year Group Average Score], dbo.PGJSProfile.[Year 6 Maths Autumn],
dbo.StudentDetMaster.[Year 6 Maths Set],
dbo.StudentDetMaster.[JS Baseline],
dbo.PGJSProfile.[Year 6 English Mock],
dbo.PGJSProfile.[Year 6 Maths Mock],
dbo.PGJSProfile.[Year 6 English Mock Year Group Average], dbo.PGJSProfile.[Year 6 Maths Mock Year Group Average]
FROM
dbo.PGJSProfile LEFT OUTER JOIN
dbo.StudentDetMaster ON dbo.PGJSProfile.SetId = dbo.StudentDetMaster.SetId AND
dbo.PGJSProfile.StudentId = dbo.StudentDetMaster.StudentId
ORDER BY dbo.StudentDetMaster.Name
cheers
greg
View 11 Replies
View Related
Jul 23, 2005
Hi,I have a php application connected through odbc to a sqlserver database.When I try to execute select queries on a smalldatetime table field Ireceive this message:Warning: [22003][0][Microsoft][ODBC SQL Server Driver]Numeric value out ofrangeThe query is something like:select dateField from tableTha field is a normal smalldatetime one:10/17/2001 12:35:00 PMWhith Query Analyzer the query works fine.I'm using php mssql_query() and ODBTP as protocol to connect to the DBMSThanksLuigi--Message posted via http://www.sqlmonster.com
View 1 Replies
View Related
Nov 27, 2007
Several of our customers are getting a message intermitantly throughout the day where the connection is closed. The message being generated is [Microsoft][ODBC SQL Server Driver]Communication Link Failure.
These messages started in the last two weeks.
Thanks for any direction that can be thrown my way.
David
View 3 Replies
View Related
Sep 12, 2001
Receiving error "Microsoft ODBC Server Driver Timeout Expired".
This is happening when running queries or stored procedures through VB6 and also in Enterprise Manager.
Have set query timeout to 0 and command timeout to 0 but no joy.
Enterprise manager cannot even perform a count of records (16Million) without timeing out.
Can anyone help...at end of tether!
Cheers,
Brookesy
View 1 Replies
View Related
