Data Source Name Not Found And No Default Driver Specified - When The Website Was Published , But Not Error When I Run It In Debug Mode(VS.NET 2005)

Oct 30, 2006

ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Source Error:


An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

Stack Trace:


[OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified]
System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35
System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131
System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.Odbc.OdbcConnection.Open() +37
DBConnection.open() +12
ASP.global_asax.Session_Start(Object sender, EventArgs e) +35
System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182
System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154
System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542
System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155

Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
 
ODBC version 3.526.1830.0
strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"
I've  Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.
When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.
The website can't work when use ODBC connection  but it work when use SqlClient.

Help me solve this problem please. T_T 
Thanks in advance,

View 8 Replies


ADVERTISEMENT

[Microsoft][ODBC Driver Manager] Data Source Name Not Found And No Default Driver Specified

Oct 19, 2006

trying to install sql server2005 on a windows 2003 server box.

getting msg below at the sql server . i looked at other posts on trying to uninstall SQL Native Access Client and norton antivirus. i could never find the snac on the add - remove programs and this server does not have a virus protection program yet.

here's the history of the installs on the server:

wanted to test a 2005 upgrade so:

1) installed sql server 2000 then sp4 then restored some databases to it - all OK

2) tried to upgrade to sql 2005 but ran into problems and left it at that.

had a disk drive crash on the d drive so lost the installs but not the operating system

when the drive was replaced, left alone for a while

then wanted to test a straight 2005 install

1) removed the broken 2005 attempt

2) removed the 2000

3) installed 2005 and got the error on the subject line:

TITLE: Microsoft SQL Server 2005 Setup
------------------------------

SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.

i've gone through as many of the forums that i can and have tried several things - like uninstalling 2005 and installing pieces and parts but but nothing seems to work.

Thanks!

Dan <><

View 17 Replies View Related

Sql2005 ODBC Driver Manager Data Source Name Not Found And No Default Driver Specified

Feb 4, 2008

i am attempting to run phpbb using ms sql 2005 on the same box but get the following error during the setup


Could not connect to the database, see error message below.
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified


i am not sure yet if this is an issue with sql, php or phpbb

php is installed in iis and has all the modules installed which the php msi installer supported. i can run php code but in this case when i'm running the install.php file for the phphbb setup, i fill in the values for the database and got that error

phpbb detects all the required server settings and sees that i have ms sql installed

any suggestions on what that error means or how to go about configuring odbc driver?

probably a simple issue. but i'm still new with sql stuff

View 1 Replies View Related

Data Source Name Not Found And No Default Driver Specified

Mar 12, 2007

I know this may be a simple problem, but here it is:

I have SQL server express installed on Windows 2003 server (Testing) it works fine;

When I move it to my production server (Windows 2003) I get the error message"Data source name not found and no default driver specified "

The system DSN in ODBC connections works fine, or at least completes the test ok.

My application is written in Classic ASP

PLEASE HELP

Thanks

View 2 Replies View Related

Access SQL Server 2005 Database Using A Published Website

Jun 26, 2006

Hi all,
 I am stuck with a problem using ASP.Net website. I created a website which accesses a database table in SQL Server 2005. The default.aspx is a form which inserts/updates/deletes data from the database. After creating the website I published it to IIS (Inetpub -> wwwroot). When I use Visual Studio 2005 and build the website and start with debugging. the form comes up and i can insert/update or delete the data from the table as I want. Now, as I have the website published I can access the form from another sharepoint website using the url as
/Employee_Data/Default.aspx">http://<mydesktop>/Employee_Data/Default.aspx
the form shows up but I am not able to access any of the database. I do not see any errors either. Once I click on the button the page just refreshes but nothing else happens. I have my web.config as :-
<?xml version="1.0"?>
<configuration>
<appSettings/>
<connectionStrings/>
<system.web>
<compilation debug="true"/>
<authentication mode="Windows"/>
</system.web>
</configuration>
 
Am I missing something? I even have Anonymous access in the IIS inetpub properties. I can even the database as I am the administrator..... I appreciate your suggestions.
 
Thanks,
Kavya

View 1 Replies View Related

VS.NET Debug Website Gives Connection Error To SQL Database

Dec 28, 2006

Hi all,

I've got a little problem.

I'm working on a ASP.NET project. The applications has 4-layers. When I look in the Data Access Layer and test the typed dataset, then the "Preview Data" works fine. I see the right records from SQL Server 2005.

But when I run the app (default.aspx) in debug-mode, then the system gives the following error:

"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"

Please help.....

View 3 Replies View Related

Resolution Of Following Error: IM010: [Microsoft][ODBC Driver Manager] Data Source Name Too Long

Feb 26, 2008

Hi SQL Server Team,

In order to add a data source by using ODBC Administrator, programmatically i am using SQLConfigDataSource. Thus calling SQLConfigDataSource with the fOption set to either ODBC_ADD_DSN for creating a new DSN.

Following is the stattement specified in the source code. where type_of_driver = "Microsoft Access Driver (*.mdb)"; and parameters contains the data source source credentials information such as DSN, UID, PSW, FIL, Description, DataDirectory,DEFAULTDIR and DBQ all separated by "".

rc = SQLConfigDataSource(NULL, ODBC_ADD_DSN, type_of_driver, parameters);

after execution of below mentioned command an error is encountered i.e -1 is returned if the DataDirectory path exceeds certain nested directories link. for eg. the file path specified below.

C:My DocumentsClients CurrentAHW Netcare BenefitsDeliverables1-5 Results Chain - system LevelAlberta NetcareBenefits Logic System Level V01.rcm

Creating a datasource with the file name i.e Benefits Logic System Level V01 every time.
rc = :: SQLConnect(hDbc, (unsigned char *)szSource, SQL_NTS, (unsigned char *)szUserName, SQL_NTS, (unsigned char *)szPassword, SQL_NTS);

Also following error message was encountered during execution of SQLConnect command.

/*szErrorMsg = 0x0012e834 "[Microsoft][ODBC Microsoft Access Driver]General error Not enough information to connect to this DSN with SQLConnect. Use SQLDriverConnect."*/

Thus followed the instruction smentioned in the error message an dtried using SQL DriverConnect() in the following manner.
rc = :: SQLDriverConnect(hDbc, NULL,(SQLCHAR *)"DSN=RCM",SQL_NTS,outstr, sizeof(outstr),
&outstrlen,SQL_DRIVER_NOPROMPT);

Still an error is encountered but this time it returns a RETCODE of 100 whrease earlier it had returned -1.

Inform the procedure to be followed using SQLConnect when DataDirectory path is too long.

An early reply will be appreciated.

Cheers & Regards,

Saresh

View 1 Replies View Related

Bug? Wrong Count In The Data Flow Task In Debug Mode

Mar 10, 2008

I just had this happen twice in a row. The data flow task is showing a number of records almost twice as high as the actual data that is going into the table. This happened to me in two different DFT's with different data.

I am using an OLEDB source which uses a query something like:

select * from functiona()

In the DataFlowTask I see it had around 400,000 Rows go through the path all the way to the deastionation..

However I know that isn't right. If I do:

select count(*) from functiona() I get 200000 rows. Now the weird thing is if I check the table that it inserted to, it has the right number of rows, 200,000. (Numbers are not exact).


Anyone else had this happen?

View 6 Replies View Related

Error Description Differs When Logged With Redirect Rows Compared With Debug Mode

Jan 18, 2007

Hi,

Can any one please tell me how to get the complete error description for example when i dont Redirect Row for Error in OLEDB Source i get a detailed error message with column name as

[RCheck [385]] Error: There was an error with input column "CHECK_STATUS" (456) on input "OLE DB Destination Input" (398). The column status returned was: "The value could not be converted because of a potential loss of data.".


But when I set Redirect Row for error and use the Script component to log them into a Table with ErrorDescription based on ErrorColumnID it only gives me this.

The data value cannot be converted for reasons other than sign mismatch or data overflow.



Thanks

Sat

View 1 Replies View Related

Database Connection On My WebSite ,I Published On Internet.

Nov 9, 2007

I create a WebSite onto the internet.
Then I created a database with MSSQLmanager provided by the WebHosting.
I created a Table and put some data in it.
When I try to access the DataBase an Error says: "Connection cannot be opened. On default settings you cannot access a Database Remotely."
What shall I do to configure my Database.
basically I don't know where to go to change configuration of my Database.
In my intranet I would use SQLServerSuraceArea.
But on Internet I do not know.
someone Help.
Did I miss something ?

View 4 Replies View Related

Cannot Deploy Reports To Default Website Get Error Msg..

Mar 29, 2007

Cannot deploy reports to default website get error msg..

'A connection could not be made to the report server http://localhost/ReportServer'

additional information:
The request failed with http status 400: Bad Request. (Microsoft reporting Services Designer)

View 6 Replies View Related

SQL Tools :: Import Export Wizard Default Data Source Causing Error / Crash

Sep 1, 2015

I have several versions of SQL Server and have been using SQL 2008 on a regular basis due to this issue. Our SQL 2014 when I do the Import Data process, it opens up the dialog window, hit next, and the data source is currently defaulting to ".NET Framework Data Provider for IBM i" - when it does this it immediately errors out with:

"An error occurred which the SQL Server Integration Services Wizard was not prepared to handle.

Additional Information:
> Exception has been thrown by the target of an invocation (mscrolib)
>> Failed to find or load the registered .NET Framework Data Provider (System.Data)"

It immediately crashes/closes the Import/Export wizard with me unable to change the data source to what I need it to be.

My 2008 defaults to SQL Server Native Client 10.0 and does allow me to change to that same option (at which point it errors) but it does not close the wizard.

I need a way to either:

> Default the starting Data Source to be something else
> Fix whatever error is causing it to crash - I am at a loss as to what the error is looking for
> Not have the wizard crash whenever it defaults to this source.

Any of the above solutions would work fine - but at the moment I am unable to use the Import/Export wizard at all in SQL 2014.

View 3 Replies View Related

Retrieve Fields List From A Published Report Data Model Published On The Reporting Server.

Jul 17, 2007

Can someone please tell me how to retrieve/query the list of fields from an entity of a report data model that has been published on the reporting server programmatically ?

I am trying to upload a report data model to the reporting server and planning to use that model as the data source and consume it through our existing web application?

Thank you ,

Rashid A. Khan

View 1 Replies View Related

What Will My Data Source On The Website?

Mar 24, 2008



Hi,

I created a website in Visual Studio and the data will be stored in SQL Server 2005. I publish the website in a local folder of my machine(because i don't have internet connection in my machine) and want to transfer these files from the internet cafe.

Let me tell you my problem about the "data source". The following statement i extracted from the web.config file and i want to know when i upload my website then what will the data source name. Whether i need to give IP address or name of server or what else. Give me some example?

And more over the following are the two ways connection to the database. the first one i have created database directly in SQL Server and another database i attached in my website directory. Please tell me in both circumstances what would be data source. Please tell me in detail.<connectionStrings>

<add name="BLMSDBConnectionString1" connectionString="Data Source=mycomputername;Initial Catalog=BLMSDB;Integrated Security=True"

providerName="System.Data.SqlClient" />

<add name="employeeConnectionString1" connectionString="Data Source=mycomputername;AttachDbFilename=|DataDirectory|employee.mdf;Integrated Security=True;User Instance=True"providerName="System.Data.SqlClient" />

</connectionStrings>



Here i used SQL Server Express in my machine, if the Web server contains SQL Enterprise Edition then in scenario....
Here i am very confusion, if i want i can create database in my machine but in their server how?



Hoping for reply,

thanks..............


Best Regards
Kashif Chotu

View 5 Replies View Related

Error Message Setting Up System DSN: Setup Routines Not Found. Please Reinstall Driver.

Apr 24, 2006

Hi,

I'm running W2K3 SP1. The MDAC Configuration Checker reports MDAC 2.8 SP2. The only discrepancy is MSADCO.DLL, where the expected version is 2.82.1830.0 and my actual version is 2.82.2651.0 (svr03_sp1_gdr.060301-1546).

The error message I'm getting when I use the ODBC Administrator dialog to set up a new entry is: "The setup routines for the SQL Server ODBC driver could not be found. Please reinstall the driver."

This is followed by a dialog titled: "Driver's ConfigDSN, ConfigDriver, or ConfigTranslator failed." The body text of the dialog is "Component not found in the registry."

Does anyone have any idea how I can repair this?

Thanks,

View 13 Replies View Related

Data Source Name Not Found

May 21, 2008

Hello,

Im developing an asp website, but im getting this error:


Code Snippet

Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
/default.asp, line 76


I have 2 servers, the website is running from RACS-IIS-001, and the SQL server is from: RACS-SQL-001

I dont know if i use the wrong driver? im useing SQL Native Client
This is my connection string:


Code SnippetobjConn.Open "Driver={SQL Native Client}; Server=RACS-SQL-001; database=RentACar; uid=sa ; pwd=PASSWORD;"


Can anyone help?

View 4 Replies View Related

Data Extraction From A Source Using SOLID ODBC Driver

May 12, 2008



Hi all,

We are using a package to extract data from a source build on some image using SOLID ODBC 5.2 driver.
When we tried to extract data through MS SSIS(SQL Server Integration Services) package using SOLID 5.2 ODBC driver connection, it throws an error as mentioned below:
ERROR DESCRIPTION:


Error: 0xC02090F5 at Data Flow Task, DataReader Source [1]: The component "DataReader Source" (1) was unable to process the data.

Error: 0xC0047038 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on component "DataReader Source" (1) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.

Error: 0xC0047021 at Data Flow Task, DTS.Pipeline: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.

Also, we tried the same in a Excel sheet using the SOLID 5.2 ODBC driver it is working fine.
Does the SOLID ODBC driver support .Net framework or do we need to install any other components??

Thanks and Regards,
Nirmal

View 2 Replies View Related

A Field Or Property With The Name 'Jan' Was Not Found On The Selected Data Source.

Jul 31, 2007

I have this Stored Procedure:
Create PROCEDURE ListEventas If MONTH(GetDate()) <= 6 Begin SELECT EventTitle,  EventDuration,  (CASE WHEN MONTH(StartDate) = 1 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jan',  (CASE WHEN MONTH(StartDate) = 2 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Feb',  (CASE WHEN MONTH(StartDate) = 3 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Mar',  (CASE WHEN MONTH(StartDate) = 4 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Apr',  (CASE WHEN MONTH(StartDate) = 5 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'May',  (CASE WHEN MONTH(StartDate) = 6 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jun'FROM dbo.tblEvent INNER JOIN  dbo.tbl ON (tblEvent.EventID = tblEventdate.EventID)WHERE  YEAR(StartDate) = Year(GetDate())group by EventTitle, EventDuration,StartDate,EndDateEnd Else  BeginSELECT EventTitle, EventDuration,(CASE WHEN MONTH(StartDate) = 7 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Jul',  (CASE WHEN MONTH(StartDate) = 8 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Aug',  (CASE WHEN MONTH(StartDate) = 9 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Sep',  (CASE WHEN MONTH(StartDate) = 10 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Oct',  (CASE WHEN MONTH(StartDate) = 11 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Nov',  (CASE WHEN MONTH(StartDate) = 12 THEN Datename(Day,StartDate) + ' - ' + Datename(Day,EndDate) ELSE '' END) AS 'Dec'FROM dbo.tblEvent INNER JOIN  dbo.tbl ON (tblEvent.EventID = tblEventdate.EventID)WHERE  YEAR(StartDate) = Year(GetDate())group by EventTitle, EventDuration,StartDate,EndDateEnd 
 When I execute it in the SQLExpress, the result returned as expected. But when I bind to Gridview I got this error:
A field or property with the name 'Jan' was not found on the selected data source. 
How do I solve this?  
 I am using drag and drop SQLDatasource to call the Stored Proc and VB.net is the language.  Thanks
 

View 4 Replies View Related

SetItemDataSources Keeps Telling Me The Data Source Cannot Be Found, But It's There... What's The Trick?

Apr 16, 2007

I have a custom folder layout for reporting services on our test environment so each tester can test the reports against the data in their own instances. The developers have reports in a different layout that's more in line with what will be in production. So I figured some simple RS scripting would handle things.



It was easy to create the folder structure, easy to create the shared data sources in each testers reports folders, and easy to deploy the report from the developers folder (source) to the testers report folders. However, when I try to use SetItemDataSources to change the data source in the newly duplicated reports, I keep getting an error telling me that the data source cannot be found.



Here's the relevant code fragment:



'Set report DataSource references

Dim DataSources(0) As DataSource

DataSources(0) = New DataSource



' update with new data source info

DataSources(0).Name = strDSName

Dim Item1 as DataSourceReference = New DataSourceReference

Item1.Reference = strRef

DataSources(0).Item = Item1

Console.WriteLine( "Setting report {0}, data source to {1}", strTargetReport, strRef)

RS.SetItemDataSources( strTargetReport, DataSources)



strDSName is "OLTP", strRef is the path to the shared data source, "/Reports/Tester1/Data Sources/OLTP". strTargetReport is the name of the report itself, full path name to "/Reports/Tester1/Report1".



Each tester has their own folder off the main reports folder "Reports", with an incremental number, as in "Tester1". Each testers folder has it's own Data Sources folder. There is only one data source for all reports, "OLTP".



/Reports

/Reports/Tester1

/Reports/Tester1/Data Sources

/Reports/Tester1/Data Sources/OLTP

/Reports/Tester1/Report1

/Reports/Tester1/Report2



I even went into SQL Server Management Studio and tried changing the (now broken) data source setting for a report to point to the correct data source (OLTP), then copied the generated script, then ran it - and still got the data source cannot be found error. That's what my latest code shown above was based on.



Anyone got any clues?



Thanks,

--Stan

View 3 Replies View Related

OLE DB Source - Data Access Mode - SQL Command

Feb 14, 2006

I got a package with data flow task. Within the data flow task I have flat file with Fiscal Calendar defined. I got another data source within the data flow task, which is OLE DB Source. I want to use SQL Command as data access mode. SQL similar to one the below is in there.

----------------------------------------------------------------------------------------------------

DECLARE @startdate DATETIME
DECLARE @enddate DATETIME
DECLARE @date DATETIME
DECLARE @id INT

SET @startdate = '1993-09-26' --Change these to
SET @enddate = '2010-09-25' --whatever you want
SET @id = 1
SET @date = DATEADD(dd, @id, @startdate)

WHILE @date <= @enddate
BEGIN
select @date CalendarDate,
DATEPART(dd, @date) CalendarDayMonth,
DATEPART(dy, @date) CalendarDayYear,
DATEPART(dw, @date) CalendarDayWeek,
DATENAME(dw, @date) CalendarDayName

SET @id = @id + 1
SET @date = DATEADD(dd, @id, @startdate)

END

----------------------------------------------------------------------------------------------------

This SQL works fine in SSMS and returns around 6000 rows. But when I plug the same SQL in OLE DB Source it returns only the first record. It is not going through the WHILE loop.

Has anyone came across this?

Thanks

Sutha

View 2 Replies View Related

Vista MYSQL ODBC Manager Data Source Not Found

Nov 26, 2007

I am testing an application that uses mysql that works 100% fine with Microsoft Windows XP on Windows Vista Premium Home Edition.

Using Vista's ODBC Data Source Administrator I have set up and successfuly tested the DSN Connection to the Database.

However, when I call the set up DSN with the application I get [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.

I am using the mysql-connector-odbc-3.51.12-win32.

I have tried editing the registry DSN files - the problem still persists.

Does anybody know a way to solve this problem

View 1 Replies View Related

Manage A Data Source For A Report Found In A SharePoint Document Library

Jan 18, 2007

I was working for 2 days on integrating reporting services with MOSS 2007.



The problem i faces was to create a data source for the
uploaded report (Not created using a wizard ) that will connect
me to the SQL server.



As i clicked on the arrow near the uploaded report to manage the data source, i found no

data source for this item.



I would be pleased to know the howto create this data source and where.



Best Regards,



Lana

View 4 Replies View Related

Package Cancels In Debug Mode

Oct 10, 2007

I'm having problems getting a package that I'm trying to develop to run consistently.

This package is using and IBM OLE DB Provider for DB2 connection manager to move data from a remote DB2 for Windows source to a Native OLE DBSQL Native Client connection manger for a SQL 2005 destination.

Sometimes the package works. Sometimes it doesn't. When it doesn't, a command window briefly flashes in Visual Studio before execution "completes". There are no error messages even though the job aborts and no data is moved. The only indication of failure is that the data flow task never changes to green and the output reports that the package was "Canceled". Here's the debug output I'm getting:


Information: 0x40016041 at Integrity_Report_ABD: The package is attempting to configure from the XML file "O:JrsfilesScriptsSSISConfigDB.dtsConfig".

Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"DMS.EDW.EtlData";".

Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"FG.DCS.ABD";".

SSIS package "Integrity_Report_ABD.dtsx" starting.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x4004300A at Data Flow Task, DTS.Pipeline: Validation phase is beginning.

Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning.

Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning.

SSIS package "Integrity_Report_ABD.dtsx" finished: Canceled.

This is the first time we've tried to connect to our WinDB2 servers with SSIS. I'm thinking that I may need to move away from this type of connection and revert back to something like ODBC.

Thoughts?

Thanks,
Bryan

View 8 Replies View Related

Ex.Message In Debug Mode Is Much Shorter

Jan 8, 2007

Exception ex.Message I am getting in debug mode calling AcquireConnection is much shorter than the logged message in run time because all the errors come to output window in debug. Is there any way to get all these errors description from exception object in debug time to be able to parse it?
Thanks.

View 5 Replies View Related

Can I Access My Data Source In Custom Report Item During Design Mode?

Mar 19, 2007

Hi,

I'm developing a Custom Report Item and would like to fill my properties dialog in design mode with real data. I have the name of the data source and the command text for the corresponding report dataset, read from the report design.

Is it possible to create an ado.net dataset so that I can display and use real data in my properties dialog box? First problem I have is to get the connection string from the data source string. I found no docs for that, especially the Microsoft.ReportingServices.DataExtensions.ReportDataSource class is not documented. Am I on the right way with that?

Thomas

View 3 Replies View Related

An Error Has Occurred During Report Processing. A Data Source Instance Has Not Been Supplied For The Data Source DetailDS_get_o

Mar 13, 2008

hi ,

i am trying for a drill through report (rdlc)

ihave written the following code in drill through event of reportviewer, whenever i click on the first report iam getting the error like

An error has occurred during report processing.


A data source instance has no
t been supplied for the data source "DetailDS_get_orderdetail".







the code is



using System;

using System.Data;

using System.Data.SqlClient;

using System.Configuration;

using System.Collections;

using System.Web;

using System.Web.Security;

using System.Web.UI;

using System.Web.UI.WebControls;

using System.Web.UI.WebControls.WebParts;

using System.Web.UI.HtmlControls;

//using Microsoft.ApplicationBlocks.Data;

using Microsoft.Reporting.WebForms;

using DAC;

public partial class _Default : System.Web.UI.Page

{

protected void Page_Load(object sender, EventArgs e)

{

ReportViewer1.Visible = false;

}

protected void Button1_Click(object sender, EventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

DataSet ds = new DataSet();

ds = obj.get_order();

ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DataSet1_get_order", ds.Tables[0]);



ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = "C:/Documents and Settings/km63096/My Documents/Visual Studio 2005/WebSites/drillthrurep/Report.rdlc";

ReportViewer1.LocalReport.Refresh();

ReportViewer1.Visible = true;

}

protected void ReportViewer1_Drillthrough(object sender, DrillthroughEventArgs e)

{

DAC.clsReportsWoman obj = new clsReportsWoman();

ReportParameterInfoCollection DrillThroughValues =

e.Report.GetParameters();



foreach (ReportParameterInfo d in DrillThroughValues)

{

Label1.Text = d.Values[0].ToString().Trim();

}

LocalReport localreport = (LocalReport)e.Report;

string order_id = Label1.Text;

DataSet ds = new DataSet();

ds = obj.get_orderdetail(order_id);



ReportViewer1.LocalReport.DataSources.Clear();

ReportDataSource reds = new ReportDataSource("DetailDS_get_orderdetail", ds.Tables[0]);

ReportViewer1.LocalReport.DataSources.Add(reds);

ReportViewer1.LocalReport.ReportPath = Server.MapPath(@"Reportlevel1.rdlc");

ReportViewer1.LocalReport.Refresh();





}



}

the code in method get_orderdetail(order_id) is

public DataSet get_orderdetail(string order_id)
{
SqlCommand cmd = new SqlCommand();
DataSet ds = new DataSet();
cmd.Parameters.Add("@order_id", SqlDbType.VarChar, 50);
cmd.Parameters["@order_id"].Value = order_id;
ds = SQLHelper.ExecuteAdapter(cmd, CommandType.StoredProcedure, "dbo.get_orderdetail");
return (ds);
}pls help me.

View 1 Replies View Related

Command Line Arguments In Debug Mode

Apr 24, 2007

Hi,

I am passing some /SET commands on the command line when I execute packages I created in SSIS and have run from the SQL Server Job manager. When I put these same /SET commands on the command line arguments section of the project properties page I would expect they would be passed into the executed package when it is run thru BIDS. But the variables still have their defined values when the packages executes.



Is there a trick to getting command line arguments to work in the debugger for SSIS/BIDS??


DaveM

View 4 Replies View Related

Execute Mutiple Tasks In Debug Mode

Apr 7, 2006

Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.

There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!

Can this be achieved by setting breakpoints?

View 3 Replies View Related

SSIS OLEDB Source Data Access Mode (Table Name Or View Name Variable)

Apr 3, 2007

Thanks for any one can give me a help.

I am try to transfer some tables data from one database server into another database server. I create a package in SSIS, and I use a variable to pass each table name. In Data flow, I use a OLEDB Source, but I cannot set the Data access mode to Table name or view name variable. Ever time, I will get this following error info "===================================

Error at Data Flow Task [OLE DB Source [31]]: A destination table name has not been provided.

(Microsoft Visual Studio)

===================================

Exception from HRESULT: 0xC0202042 (Microsoft.SqlServer.DTSPipelineWrap)

------------------------------
Program Location:

at Microsoft.SqlServer.Dts.Pipeline.Wrapper.CManagedComponentWrapperClass.ReinitializeMetaData()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowComponentUI.ReinitializeMetadata()
at Microsoft.DataTransformationServices.DataFlowUI.DataFlowAdapterUI.connectionPage_SaveConnectionAttributes(Object sender, ConnectionAttributesEventArgs args)".

Some one can tell me what is the reason, or give me some examples.

Thanks in advance.

View 7 Replies View Related

Why Do All Packages In The Project Open When Running One In Debug Mode?

Feb 7, 2006

Does anyone know why this happens? When I run one of the packages in my project (by hitting the play button in the designer), all of the other packages in that project open before it starts running?

Thank you.

View 6 Replies View Related

SQL Data Source Default Timedate Format.

Sep 27, 2007

Hello Everybody,
I have a problem that when I insert a date 06.04.2007 on my
computer it is interpreted in European style (meaning: dd/MM/yyyy)
and the same code on another computer is interpreted in American
style (MM/dd/yyyy). So on one computer 06.04 means 6th on April, and
on others 4th of June. The question is how can I programatically set
that all the SQLDataSources (or en every one of them separately) take
the date from the text box in one or the other way – not depending
on local settings (it does not matter for me too much which one -
just so that it always works the same way. It would be better for me
to use European style though).All the best,Joseph 

View 2 Replies View Related

New Data Source Showing Only Default Instance

Dec 27, 2006

I have two instances in SQL on my machine. When creating a New Data Source in BIDS, I can only see the default instance. I have checked the SAC manager to make sure the second instance allows remote connections and the setting are exactly the same as the default. Any ideas? Thanks.

View 4 Replies View Related

Application Crashes When Calling Sql Server Routine In Debug Mode.

Mar 23, 2008

I use Microsof Visual Studio 2005 to write a c# aplication for my compact device (Dell Axim).
I also use Sql Server Compact Edition to handle my database.
Everything worked OK but suddenly I get an exception on the first call to fill command of a table in my database (Any table) This exception is happenning only when I debug the application if i run the application without debug everything is workink OK.
The exception details are :

System.Data.SqlServerCe.SqlCeException was unhandled
Message="Unspecified error [ sqlceqp30.dll ]"
HResult=-2147467259
NativeError=25123
Source="SQL Server Compact Edition ADO.NET Data Provider"
StackTrace:
at System.Data.SqlServerCe.SqlCeConnection.ProcessResults()
at System.Data.SqlServerCe.SqlCeConnection.Open()
at System.Data.SqlServerCe.SqlCeConnection.Open()
at System.Data.Common.DbDataAdapter.QuietOpen()
at System.Data.Common.DbDataAdapter.FillInternal()
at System.Data.Common.DbDataAdapter.Fill()
at System.Data.Common.DbDataAdapter.Fill()
at Ness300.NessDBDataSetTableAdapters.UsersTableAdapter.Fill()
at Ness300.LoginPanel.DoLogin()
at Ness300.LoginPanel.OKButton_Click()
at NL300Controls.BmpButton.L300Button_MouseUp()
at System.Windows.Forms.Control.OnMouseUp()
at System.Windows.Forms.Control.WnProc()
at System.Windows.Forms.ContainerControl.WnProc()
at System.Windows.Forms.Control._InternalWnProc()
at Microsoft.AGL.Forms.EVL.EnterMainLoop()
at System.Windows.Forms.Application.Run()
at Ness300.Program.Main()

I tried to run the application from the mobile device in order to connect to it doing "Attch to running process" from visual studio.
But just running the application on the device with the resgistry value:
HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETCompactFrameworkManaged DebuggerAttachEnabled
set to 1 caused the crash when I set it back to 0 everything works fine.
It worked for me before I do not know what happened.
Is it a security problem ?

Can any one helpi me with this because this problem do not give me a way to debug my application.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved