Error Description Differs When Logged With Redirect Rows Compared With Debug Mode
Jan 18, 2007
Hi,
Can any one please tell me how to get the complete error description for example when i dont Redirect Row for Error in OLEDB Source i get a detailed error message with column name as
[RCheck [385]] Error: There was an error with input column "CHECK_STATUS" (456) on input "OLE DB Destination Input" (398). The column status returned was: "The value could not be converted because of a potential loss of data.".
But when I set Redirect Row for error and use the Script component to log them into a Table with ErrorDescription based on ErrorColumnID it only gives me this.
The data value cannot be converted for reasons other than sign mismatch or data overflow.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.Odbc.OdbcException: ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specifiedSource Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [OdbcException (0x80131937): ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified] System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) +35 System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcConnectionString constr, OdbcEnvironmentHandle environmentHandle) +131 System.Data.Odbc.OdbcConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +98 System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.Odbc.OdbcConnection.Open() +37 DBConnection.open() +12 ASP.global_asax.Session_Start(Object sender, EventArgs e) +35 System.Web.SessionState.SessionStateModule.RaiseOnStart(EventArgs e) +2163182 System.Web.SessionState.SessionStateModule.CompleteAcquireState() +154 System.Web.SessionState.SessionStateModule.BeginAcquireState(Object source, EventArgs e, AsyncCallback cb, Object extraData) +542 System.Web.AsyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +90 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 ODBC version 3.526.1830.0strconn = "DSN=testserver;uid=tester;pwd=tester;DATABASE=Test_Database"I've Test_Database on 2 machines (same data in both machines), one is in SQL 2005 server and another one is in SQL 2000 server.When the website was published, it can't work. (with both database). But it work in debug mode in Visual Studio2005.The website can't work when use ODBC connection but it work when use SqlClient.Help me solve this problem please. T_T Thanks in advance,
I sometimes have problems when running index rebuilds due to the tran log growing too big. MS suggest switching the db from full recovery mode to bulk-logged mode fur the duration of the rebuild. Question is, when you switch a db from full recovery to bulk logged, does that invalidate the tran log backups up to that point? When the db is switched back into full-recovery mode, are the following tran log backups still in sequence?
Hi Guys, I have an Intranet web application and I have to use windows authentication. They are 4 main users group to access the application, each with different set of permission on my store procedures. I have created a windows group for each of those group in my windows environemnt. My DB Connection String in web.config is set to Integrated Windows Authentication ( Integrated Security=SSPI) I have done all configuration based on this article: http://msdn2.microsoft.com/en-us/library/ms998292.aspx I have 4 different database Roles in my database and 4 different database users. I also add NT AUTHORITYNETWORK SERVICE as a member of each of those database Roles. Now I get connected, fine and set permission on the database roles. 1 thing I want to know, How Can I get the Windows Group name in the database, which has the same name as my SQL Login and Database Roles or User I tried all SUSER_SNAME() and ... they all return NT AUTHORITYNETWORK SERVICE I want to get AppPowerUser Role or windows group name. I think I should be able to because I am using windows authentication. Any help is appreciated. Mehdi
I'm having problems getting a package that I'm trying to develop to run consistently.
This package is using and IBM OLE DB Provider for DB2 connection manager to move data from a remote DB2 for Windows source to a Native OLE DBSQL Native Client connection manger for a SQL 2005 destination.
Sometimes the package works. Sometimes it doesn't. When it doesn't, a command window briefly flashes in Visual Studio before execution "completes". There are no error messages even though the job aborts and no data is moved. The only indication of failure is that the data flow task never changes to green and the output reports that the package was "Canceled". Here's the debug output I'm getting:
Information: 0x40016041 at Integrity_Report_ABD: The package is attempting to configure from the XML file "O:JrsfilesScriptsSSISConfigDB.dtsConfig".
Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"DMS.EDW.EtlData";".
Information: 0x40016040 at Integrity_Report_ABD: The package is attempting to configure from SQL Server using the configuration string ""SSISConfiguration";"[dbo].[SSISConfigurations]";"FG.DCS.ABD";".
This is the first time we've tried to connect to our WinDB2 servers with SSIS. I'm thinking that I may need to move away from this type of connection and revert back to something like ODBC.
Exception ex.Message I am getting in debug mode calling AcquireConnection is much shorter than the logged message in run time because all the errors come to output window in debug. Is there any way to get all these errors description from exception object in debug time to be able to parse it? Thanks.
I am passing some /SET commands on the command line when I execute packages I created in SSIS and have run from the SQL Server Job manager. When I put these same /SET commands on the command line arguments section of the project properties page I would expect they would be passed into the executed package when it is run thru BIDS. But the variables still have their defined values when the packages executes.
Is there a trick to getting command line arguments to work in the debugger for SSIS/BIDS??
Maybe I'm missing something, but I can't find how to run multiple tasks in sequence while in Visual Studio debug mode. In DTS design mode I grew accustomed to right-clicking tasks one-at-a time, but in SSIS I find the additional step of having to exit Debugging mode after every task gets old after a while.
There must be a way to start execution at a certain task and have the package continue all the way to some other specified task. It would also be nice to have every task in a Group execute in sequence and stop (even if connections continue beyond the group). I could even settle for repeatedly clicking the Continue button in Debug mode, but it's always grayed out when the current task is finished!
Does anyone know why this happens? When I run one of the packages in my project (by hitting the play button in the designer), all of the other packages in that project open before it starts running?
I have a package that works fine when taking data from Oracle and loading it into SQL Server using Ole DB source and Ole DB destination tasks.
However I have a bad record in my source now. Date value for a specific field is less than year 1753. So everytime I run with that record present in the source, the load fails when it hits that record.
Whats the best to deal with this? I tried redirecting the bad record to a file but it doesnt work as SSIS doesnt let you create error output for ole db destination task, so it can sent the record into a flat file or something else for later review.
suggestions on how to trap the bad record and redirect it to a text file? and what would the dataflow look like?
I just had this happen twice in a row. The data flow task is showing a number of records almost twice as high as the actual data that is going into the table. This happened to me in two different DFT's with different data.
I am using an OLEDB source which uses a query something like:
select * from functiona()
In the DataFlowTask I see it had around 400,000 Rows go through the path all the way to the deastionation..
However I know that isn't right. If I do:
select count(*) from functiona() I get 200000 rows. Now the weird thing is if I check the table that it inserted to, it has the right number of rows, 200,000. (Numbers are not exact).
I use Microsof Visual Studio 2005 to write a c# aplication for my compact device (Dell Axim). I also use Sql Server Compact Edition to handle my database. Everything worked OK but suddenly I get an exception on the first call to fill command of a table in my database (Any table) This exception is happenning only when I debug the application if i run the application without debug everything is workink OK. The exception details are :
System.Data.SqlServerCe.SqlCeException was unhandled Message="Unspecified error [ sqlceqp30.dll ]" HResult=-2147467259 NativeError=25123 Source="SQL Server Compact Edition ADO.NET Data Provider" StackTrace: at System.Data.SqlServerCe.SqlCeConnection.ProcessResults() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.SqlServerCe.SqlCeConnection.Open() at System.Data.Common.DbDataAdapter.QuietOpen() at System.Data.Common.DbDataAdapter.FillInternal() at System.Data.Common.DbDataAdapter.Fill() at System.Data.Common.DbDataAdapter.Fill() at Ness300.NessDBDataSetTableAdapters.UsersTableAdapter.Fill() at Ness300.LoginPanel.DoLogin() at Ness300.LoginPanel.OKButton_Click() at NL300Controls.BmpButton.L300Button_MouseUp() at System.Windows.Forms.Control.OnMouseUp() at System.Windows.Forms.Control.WnProc() at System.Windows.Forms.ContainerControl.WnProc() at System.Windows.Forms.Control._InternalWnProc() at Microsoft.AGL.Forms.EVL.EnterMainLoop() at System.Windows.Forms.Application.Run() at Ness300.Program.Main()
I tried to run the application from the mobile device in order to connect to it doing "Attch to running process" from visual studio. But just running the application on the device with the resgistry value: HKEY_LOCAL_MACHINESOFTWAREMicrosoft.NETCompactFrameworkManaged DebuggerAttachEnabled set to 1 caused the crash when I set it back to 0 everything works fine. It worked for me before I do not know what happened. Is it a security problem ?
Can any one helpi me with this because this problem do not give me a way to debug my application.
Hi, i have a OLE DB transformation that executes a stored procedure. The stored procedure RAISERROR when an error is caught. I have set the OLE DB transformation to redirect rows. But instead, the task turns red and fails. Did i do something wrong here ?
When running a package in VS you can see something like this in the output window:
SSIS package "logging.dtsx" starting. Information: 0x40043006 at Data Flow Task, DTS.Pipeline: Prepare for Execute phase is beginning. Information: 0x40043007 at Data Flow Task, DTS.Pipeline: Pre-Execute phase is beginning. Information: 0x402090DC at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has started. Information: 0x4004300C at Data Flow Task, DTS.Pipeline: Execute phase is beginning. Warning: 0x8020200F at Data Flow Task, Flat File Source [1]: There is a partial row at the end of the file. Information: 0x402090DE at Data Flow Task, Flat File Source [1]: The total number of data rows processed for file "C: est ssis loggingad_data1.txt" is 477. Information: 0x402090DF at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has started. Information: 0x402090E0 at Data Flow Task, OLE DB Destination [1011]: The final commit for the data insertion has ended. Information: 0x40043008 at Data Flow Task, DTS.Pipeline: Post Execute phase is beginning. Information: 0x402090DD at Data Flow Task, Flat File Source [1]: The processing of file "C: est ssis loggingad_data1.txt" has ended. Information: 0x40043009 at Data Flow Task, DTS.Pipeline: Cleanup phase is beginning. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "DataReaderDest" (87)" wrote 0 rows. Information: 0x4004300B at Data Flow Task, DTS.Pipeline: "component "OLE DB Destination" (1011)" wrote 1 rows. SSIS package "logging.dtsx" finished: Success.
This is exactly when I need when a package is running but I want to be able to see it without using Visual Studio. I would do it in Reporting Services but I need to find out to get the information. The SSIS logging feature in a package does not provide that kind of info.
I am actually using a Script task to parse and load an XML file into multiple tables, however I want to add to this so that in case of a failed record I want to redirect it to a log table using Script Task, can anyone provide me with a good link or approach to do this.
This would actually be funny if I weren't under serious time constraints right now. I have an SSIS project with several script tasks in the control flow. I put breakpoints in one of them to allow me to step through and see whats going on. However, when I start the project, the IDE brings up the script editor for a different script task. The breakpoints in this task are actually on the same line numbers as the task I need to debug but the code is all wrong. I checked the task for which the code is being displayed and there are no breakpoints there.
I use a redirect row method for error of OLE DB Destination For sqlServer2005.
For some resone even though only 1 record has error and should be redirect, all the record in the current batch (I think depending on the "maximum insert commit size") are redirect. the only way for me to get the exact bad record is to set the above parameter to 1, but then it takes hours to run the package.
also I always get the same error in the errorCode column - " -1071607685"
We are working on a DataWarehouse app. The DW has been loaded wiith transactional data from the start of September. and we want refresh the DW with a full load from the original source. This full load wil consist largely of the same records that we loaded initially in the DW but some records will be new and others will have changed.
During the load I want to direct input records NOT already in the DW to a "mods" table and ignore those input records that alreayd exist in the DW. Can SSIS help out with this task?
 I have a requirement .Where i might have multiple rows one of the row will have description and second row might be related description but wiht routning number null .I want to concatenate these rows
I am running dts in Sql Server 2005 management studio from Management, Legacy and data Transformation Services.
Once the dts has run, I get this error message "Error Source : Microsoft Data Transformation Services (DTS) Package Error Description : Error accessing Windows Event Log."
In SSIS packages, records which do not get processed successfully can be re-directed to different destination for logging or correcting purposes. With 2 additional fields ERROR_CODE and ERROR_COLUMN appended to the dirty row values. To indicate the specific error that has occurred and on which column the error has occurred, I have certain doubts on this error reporting mechanism in SSIS packages.
The ERROR_COLUMN that is reported is not the column name but a number identifying that column uniquely. how can we at run time remap this column number to the exact column name?
I have several lookups in my data flow task and for each of these I want to redirect error to one file (append data) I created Flat File connection manager and first lookup goes fine with errors redirected to the file. However, second error redirect that I am sending to the same file is failing. Error I get is: "[Flat File Destination 1 [14851]] Warning: The process cannot access the file because it is being used by another process.€?
So my goal is to have one central file where I would redirect all records that fail.
when I'm trying to redirect a row I'm having the following error:
Error 4 Validation error. Data Flow Task: OLE DB Destination [535]: The error row disposition on "input "OLE DB Destination Input" (548)" cannot be set to redirect the row when the fast load option is turned on, and the maximum insert commit size is set to zero. PCKG_MPP.dtsx
Error 18456 will not write to the NT Event Log. I have made sure that it is set up to always write to the Windows NT Event log, but when the error occurs there is not entry in the log. Other errors log just fine, but this one does not.
This seems like a simple task that just doesn't work. I have an XML source, and on that source, I have the Error Output configured such that the Trunctations are set to "Ignore failure", and the Errors are all set to "Redirect Row". They are then being redirected to a Row Count transformation.
To set up a test for this, I have an integer type (DT_I4 specifically) that I am populating with an alpha-numeric value. For example:
<BatchID>118a</BatchID>
However, this column prevents my XML source from loading at all, and throws the following error:
The component "XML_SRC - File" (46) failed attempting to write data to output column "BatchID" (2030) on output "Payment Error Output" (115). Input string was not in a correct format. I checked BatchID (2030) throught the advanced properties of the XML Source, and this is defined as a Unicode text stream [DT_NTEXT] field, so I don't see why there would be a problem.
Hi all, I need to get the error description from the SQL Server in a SP. For ex:
I have one insert statement which is inserting some values in a tabUserMaster table. If user tries to insert any duplicated row then following error is retruned [in Query analyzer].
Server: Msg 2601, Level 14, State 3, Procedure csp_ProvisionUser, Line 70 Cannot insert duplicate key row in object 'CoreUser' with unique index 'IDX_CoreUser_UserName'. The statement has been terminated.
I want to trap this whole message in a variable. How to do this..... :(
I have create a SSIS package, for data export import process, but if my task get failed then i have to send a mail with proper error description as the SSIS generate in output window.
Can any one sugget me to, how can i store that error desciption in my variable.?
We are consistently getting the error message below on our subscribers that have blob images. Is there a way to increase a setting to avoid SQL to throw this error, or another suggestion? Thanks in advance.
John
Error messages:
The replication agent has not logged a progress message in 10 minutes. This might indicate an unresponsive agent or high system activity. Verify that records are being replicated to the destination and that connections to the Subscriber, Publisher, and Distributor are still active.
HiAll Sql Server errors have a number. Is there any MS or MSDN website or any .net method in which I can see these errors?Thanks a lotswitch (error.Number){case 17:msgErro =....break;case 4060:msgErro = ....break;case 18456:msgErro = .....break;default:msgErro = exSql.Message;break;}
Hi I am running into a problem with getting error description from a OLEDB Destination. I have attached a script component to the Error output and am able to see the error description but this error description is very generic. In my case I have a DFT that inserts data into a table with many foreign key constraints. One of this FK is failing and I need to see that in the error description. Interestingly when you configure the Destination to fail component on error it gives a full description with the FK name that failed. But if you have redirect rows and get the error description using the script component (xxx = ComponentMetaData.GetErrorDescription(errorno)) then it only displays the following error "Data value violates Integrity Constraint". To find out the exact problem I have to run the profiler and then look for the errors. this approach although is fine when you are testing one DFT but we are in the process of migrating from our old system to SQL Server and will have 100's of DFT's.
I know SSIS is somehow able to get to this information because it is displayed when you configure to fail component option.
All,I have a problem regarding SQL Server 2000 SP3,I have SP that calls other SP and it inserts about 30,000 records as atime,in the development environment (MS Windows 2003 Enterprise, 256 RAM,3.0 GHz Intel Processor) takes about 6 seconds to run this SP.But, with the same Software but, 2.6 GHz Intel and 1 GB Ram, it runsvery slow it takes more than 135 Seconds to run,I have read a lot of articles about expanding the SQL Memory and giveit a higher process privilege but, with no use,I don't know where the problem is, do you have any idea about what isthe problem?Thank you in advance,MAG
