ADO - Cannot Access The Return Parameter Of A Stored Procedure On SQL Server 2005
Apr 18, 2007
Hello,
I am trying to access the Return Value provided by a stored procedure executed on SQL Server 2005. The stored procedure has already been tested and it returns the required value. However, I do not know how to access this value. I have tried appending a parameter to the command object using "adParamReturnValue" but that only returns an error. The code works fine without appending this parameter. I have tested it by grabbing the recordset and returning the first field.
To avoid any confusion, I'm not talking about adding an "output" parameter to the stored procedure. I just want to be able to access the return value provided when the procedure is executed. Below is some of the code I am using.
try{
pCmd.CreateInstance((__uuidof(Command)));
pCmd->ActiveConnection = m_pConnection;
pCmd->CommandType = adCmdStoredProc;
pCmd->CommandText = _bstr_t("dbo.GetFlightPlan");
............................ code here ........................................
I'm attempting to return a value from my stored procedure. Here is my button click event that runs the stored procedure. protected void btn_Move_Click(object sender, EventArgs e) { /*variables need for the update of the old staff record and the creation of the new staff record. */ BMSUser bmsUser = (BMSUser)Session["bmsUser"]; int staffid = Convert.ToInt32(bmsUser.CmsStaffID); int oldStaffProfileID = Convert.ToInt32(Request.QueryString["profileid"]); string newManager = Convert.ToString(RadComboBox_MangersbyOrg.Text); int newMangerProfileID = Convert.ToInt32(RadComboBox_MangersbyOrg.Value);
SqlParameter sp = new SqlParameter("@OLDManagerReturn", SqlDbType.Int); sp.Direction = ParameterDirection.Output; cmd.Parameters.Add(sp);
lbl_ERROR.Text = Convert.ToString(sp);
conn.Open(); SqlTransaction trans = conn.BeginTransaction(); cmd.Transaction = trans; cmd.ExecuteNonQuery(); conn.Close(); My parameter sp is coming back null for some reason. Am I not setting the parameter correctly? I set a break point and it says the value is null. Here is the parts of my stored proc returning the value... DECLARE @OLDManagerReturn numeric(9) SELECT @OLDManagerReturn = ManagerProfileID FROM tblBMS_Staff_rel_Staff WHERE StaffProfileID = @OldStaffProfileID AND Active=1 AND BudgetYear = @BudgetYear RETURN @OLDManagerReturn
I am trying to retrieve the Output value from running a Stored Procedure. How can I retrieve the value into a variable? Below is the source code that I have:1 ' Insert question_text into Question table 2 Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString) 3 Dim cmd As New SqlCommand 4 Dim QuestionID As Integer 5 6 ' Set connection to DB 7 cmd.Connection = conn 8 9 cmd.CommandText = "usp_QuestionResponse_ins" 10 cmd.CommandType = Data.CommandType.StoredProcedure 11 12 Dim sp1 As SqlParameter = cmd.Parameters.Add(New SqlParameter("@question_id", SqlDbType.Int, 4)).Direction = ParameterDirection.Output 13 cmd.Parameters.Add(New SqlParameter("@assessment_id", AssessmentID)) 14 cmd.Parameters.Add(New SqlParameter("@domain_id", DomainID)) 15 cmd.Parameters.Add(New SqlParameter("@question_text_en", QuestionTextEn)) 16 cmd.Parameters.Add(New SqlParameter("@question_text_sp", QuestionTextSp)) 17 cmd.Parameters.Add(New SqlParameter("@category_en", CategoryEn)) 18 cmd.Parameters.Add(New SqlParameter("@display_order", DisplayOrder)) 19 cmd.Parameters.Add(New SqlParameter("@question_template_id", 3)) 20 QuestionID = sp1.Value 21 cmd.Connection.Open() 22 cmd.ExecuteNonQuery() 23 24 conn.Close() 25 cmd.Dispose() 26
Here is the Stored Procedure that I have: 1 ALTER PROCEDURE usp_QuestionResponse_ins 2 ( 3 @question_id int = null output, 4 @assessment_id int = null, 5 @domain_id int = null, 6 @question_text_en nvarchar(1000) = null, 7 @question_text_sp nvarchar(1000) = null, 8 @category_en nvarchar(500) = null, 9 @display_order smallint = null, 10 @question_template_id int = null 11 ) 12 As 13 BEGIN 14 DECLARE @Err Int 15 16 DECLARE @QuestionID INT 17 DECLARE @ReturnValue INT 18 SET @ReturnValue = 0 19 20 DECLARE @CategoryId int 21 SELECT @CategoryId = NULL 22 23 -- Check to see if an answer has already been inserted (i.e. revisiting) 24 SELECT @CategoryId = category_id FROM category WHERE (category_name = @category_en) AND (active_f = 1) AND (delete_f = 0) 25 IF ( @CategoryId IS NOT NULL ) 26 BEGIN 27 EXEC @ReturnValue = usp_question_ins @question_id OUTPUT, @assessment_id, @domain_id, 2, 1, 'Right', @display_order, 1, 8, @CategoryID, @question_text_en, Null, Null, 'Horizontal', 0, Null, Null, 0, 1, 0 28 SET @QuestionID = @ReturnValue 29 END 30 31 IF ( @QuestionID IS NOT NULL ) 32 BEGIN 33 DECLARE @question_locale_id int 34 EXEC usp_question_locale_ins @QuestionID, 1, @question_text_en, 1, 0 35 EXEC usp_question_locale_ins @QuestionID, 2, @question_text_sp, 1, 0 36 37 END 38 39 RETURN @QuestionID 40 End
What am I doing wrong? How do I properly capture the QuestionID from the SP? Running the SP from command line works fine. Thanks
What is the best way to design this stored procedure for speed?
I want to pass in a list of IDs and have a return value of a table that contains the ID and its associated value. Is there a way to pass in as table and come out as table?
Hi ! I have a problem with the unique identifier and don't know how to solve it. I have a stored procedure, called from my ASP.NET page, which inserts a new record into a table. I need to get the Id of the row just inserted in order to use it as a parameter of another stored procedure which inserts a new row with this value and other values. I tried with SCOPE_IDENTITY but i don't know how to ask for this value to the first stored procedure and stored it into an ASP variable. Dim cmd As New SqlCommand cmd.CommandText = "Insertar_Contacto" cmd.CommandType = CommandType.StoredProcedure cmd.Connection = connect Thanks!!
I tried to display return value from stored procedure output parameter in Query Analyzer, but I do not know how to do it. Below is my stored procedure:
Hello, since a couple of days I'm fighting with RS 2005 and the Stored Procedure.
I have to display the result of a parameterized query and I created a SP that based in the parameter does something:
SET ANSI_NULLS ON SET QUOTED_IDENTIFIER ON CREATE PROCEDURE [schema].[spCreateReportTest] @Name nvarchar(20)= ''
AS BEGIN
declare @slqSelectQuery nvarchar(MAX);
SET NOCOUNT ON set @slqSelectQuery = N'SELECT field1,field2,field3 from table' if (@Name <> '') begin set @slqSelectQuery = @slqSelectQuery + ' where field2=''' + @Name + '''' end EXEC sp_executesql @slqSelectQuery end
Inside my business Intelligence Project I created: -the shared data source with the connection String - a data set : CommandType = Stored Procedure Query String = schema.spCreateReportTest When I run the Query by mean of the "!" icon, the parameter is Prompted and based on the value I provide the proper result set is displayed.
Now I move to "Layout" and my undertanding is that I have to create a report Paramater which values is passed to the SP's parameter... So inside"Layout" tab, I added the parameter: Name allow blank value is checked and is non-queried
the problem is that when I move to Preview -> I set the value into the parameter field automatically created but when I click on "View Report" nothing has been generated!!
I trying to create a general stored procedure which updates 1 out of 140 columns depending on the column name provided as a parameter. I'm not having much luck, just wondering if anyone else had tried to do this and whether it is actually possible? Any help would be much appreciated
rst.MoveFirst Do While Not rst.EOF lstEntity.AddItem (rst.Fields(0)), 0 'lstEntity.AddItem (rst.Fields(1)), 1 rst.MoveNext Loop
The Stored Proc is as follow:
Code Block set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
ALTER PROCEDURE [dbo].[sp_DefaultEntityData] AS BEGIN
SET NOCOUNT ON;
SELECT tblEntities.[Name], tblEntities.PrimaryKey FROM tblEntities ORDER BY tblEntities.PrimaryKey;
END
The table contains 24 entries
As you can see in the VB code, I am trying to read the returned "table" into an Access ListBox. The listbox should display the entities Name but not the Primary key, but the primary key should still be "stored" in the to so that it can be used to access other data.
I have moved the tables from Access to SQL Server 2005, and would also like to port all the sql queries to sp's in SQL Server. The old way for populating the listbox was a direct SQL query in the RowSource property field. I have tried to set the lstEntity.RowSource = rst but it did not work.
Here are my Q's: 1) As what does the SP return when it is called and is there a better way to catch it than I am doing at the moment? 2) How do I read the values into the listbox, without displaying the primary key in die box?
Thank you in advance! Any help is very much appreciated.
I have some code that I need to run every quarter. I have many that are similar to this one so I wanted to input two parameters rather than searching and replacing the values. I have another stored procedure that's executed from this one that I will also parameter-ize. The problem I'm having is in embedding a parameter in the name of the called procedure (exec statement at the end of the code). I tried it as I'm showing and it errored. I tried googling but I couldn't find anything related to this. Maybe I just don't have the right keywords. what is the syntax?
CREATE PROCEDURE [dbo].[runDMQ3_2014LDLComplete] @QQ_YYYY char(7), @YYYYQQ char(8) AS begin SET NOCOUNT ON; select [provider group],provider, NPI, [01-Total Patients with DM], [02-Total DM Patients with LDL],
How to pass a XML data parameter to an SQL 2005 Stored Procedure I hope to insert a xml data into an typed xml column in SQL 2005. 1. I can run the Code 1 correctly. 2. I hope that I can pass a XML data parameter to an SQL 2005 Stored Procedure, So create the Code 2. but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: Only non-document nodes can be inserted. Found "xs:string ?". 3. I create the Code 3, but I get the error below:XQuery [cw_bookmark.Bookmark.modify()]: ',' or ')' expected 4. I create the Code 4, but I get the error below:XQuery: SQL type 'xml' is not supported in XQuery.
//--------------------------Code 1-------------------------------------create procedure Hellocw_InsertBookmark40@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert <x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 1------------------------------------- //--------------------------Code 2-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 2------------------------------------- //--------------------------Code 3-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml varchar(80)='<x:Bookmark Id="ghdce3ak-456c-4e38-ab2f-5h02d9711b67" Title="cw" Url="kk" Description="Thte" InputDate="2004-08-12" IsPrivate="false"></x:Bookmark>'asupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert cast(sql:variable("@Insertxml") as xml)as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId//--------------------------Code 3------------------------------------- //--------------------------Code 4-------------------------------------create procedure Hellocw_InsertBookmark41@userId varchar(80)='61809B69-4AD5-40E4-B456-D957C78DD99E',@Id varchar(80)='a6dce8fe-749c-4e38-ab2f-3d03d9711b3d',@Insertxml xmlasupdate cw_bookmark set Bookmark.modify('declare namespace x="http://www.hellocw.com/onlinebookmark";insert sql:variable("@Insertxml")as first into (//x:*[@Id=sql:variable("@Id")])[1]')where userId=@userId //--------------------------Code 4-------------------------------------
I have a package that I have been attempting to return a error code after the stored procedure executes, otherwise the package works great.
I call the stored procedure from a Execute SQL Task (execute Marketing_extract_history_load_test ?, ? OUTPUT) The sql task rowset is set to NONE. It is a OLEB connection.
I have two parameters mapped:
tablename input varchar 0 (this variable is set earlier in a foreach loop) ADO. returnvalue output long 1
I set the breakpoint and see the values change, but I have a OnFailure conditon set if it returns a failure. The failure is ignored and the package completes. No quite what I wanted.
The first part of the sp is below and I set the value @i and return.
Why is it not capturing and setting the error and execute my OnFailure code? I have tried setting one of my parameter mappings to returnvalue with no success.
Stored procedure A calls another stored procedure B. Rowcount is set properly in called procedure B, but does not seem to return it to calling procedure A. Otherwise the two stored procedures are working correctly. Here is the relevant code from the calling procedure A:
Print statement prints @NumBufferManagerRows as 0.
Here is the called stored procedure B:
CREATE PROCEDURE [persist].[LoadBufferManager] -- Add the parameters for the stored procedure here @StartTicks bigint, @EndTicks bigint, @TimeDiff decimal(9,2), @NumRows int OUTPUT
Hello All, I was hoping that someone had some wise words of wisdom/experience on this. Any assistance appreciated... feel free to direct me to a more efficient way... but I'd prefer to keep using a stored proc. I'm trying to pass the selected value of a dropdownlist as a stored procedure parameter but keep running into format conversion errors but I am able to test the query successfully in the SQLDatasource. What I would like to do is this: select * from tblPerson where lastnames Like "A%" . Where I pass the criteria after Like. I have the values of the drop down list as "%", "A%", "B%", .... I've been successfully configuring all of the other params, which includes another dropdown list (values bound to a lookup table also)... but am stuck on the above... Thank you for any assistance,
Currently i am using SQL Server 2012 Import/Export Wizard to upload data to sql tables manually. However i was trying to write a procedure to update that table. and on the time of execution, if i can pass excel. Is there any way to pass excel to stored procedure parameter?
I had thought that this was possible but I can't seem to figure out the syntax. Essentially I have a report where one of the parameters is populated by a stored procedure.
Right now this is easily accomplished by using "exec <storedprocname>" as the query string for the report parameter. However I am not clear if it is possible to now incorporate User!UserID as parameter to the stored procedure. Is it? Thanks
I have a stored procedure written in MS SQL Server2000 which takes argument(OUTPUT) as a cursor, and fills in the cursor with the record from the table.
I have to run this stored procedure from my C application program running in SUN OS2.9 with the help of ODBC calls.
Can anyone guide me through steps as to how to run the store procedure from my C program and receive records with the help of the cursor.
The store procedure is as follows
CREATE PROCEDURE testCursor @xyzCursor cursor varying OUT AS DECLARE temp CURSOR LOCAL FOR SELECT * FROM table OPEN temp SET @xyzCursor=temp RETURN(0) GO
Hi.here is my code with my problem described in the syntax.I am using asp.net 1.1 and VB.NETThanks in advance for your help.I am still a beginner and I know that your time is precious. I would really appreciate it if you could "fill" my example function with the right code that returns the new ID of the newly inserted row. Public Function howToReturnID(ByVal aCompany As String, ByVal aName As String) As Integer 'that is the variable for the new id.Dim intNewID As Integer Dim strSQL As String = "INSERT INTO tblAnfragen(aCompany, aName)" & _ "VALUES (@aCompany, @aName); SELECT @NewID = @@identity" Dim dbConnection As SqlConnection = New SqlConnection(connectionString)Dim dbCommand As SqlCommand = New SqlCommand()dbCommand.CommandText = strSQL 'Here is my problem.'What do I have to do in order to add the parameter @NewID and'how do I read and return the value of @NewID within that function howToReturnID'any help is greatly appreciated!'I cannot use SPs in this application - have to do it this way! :-( dbCommand.Parameters.Add("@aFirma", aCompany.Trim)dbCommand.Parameters.Add("@aAnsprAnrede", aName.Trim) dbCommand.Connection = dbConnection TrydbConnection.Open()dbCommand.ExecuteNonQuery() 'here i want to return the new ID!Return intNewID Catch ex As Exception Throw New System.Exception("Error: " & ex.Message.ToString()) Finally dbCommand.Dispose()dbConnection.Close()dbConnection.Dispose() End Try End Function
Seems like I'm stealing all the threads here, : But I need to learn :) I have a StoredProcedure that needs to return values that other StoredProcedures return.Rather than have my DataAccess layer access the DB multiple times, I would like to call One stored Procedure, and have that stored procedure call the others to get the information I need. I think this way would be more efficient than accessing the DB multiple times. One of my SP is:SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, S.Name AS 'StatusName', S.ItemDetailStatusID, S.InProgress as 'StatusInProgress', S.Color AS 'StatusColor',T.[Name] AS 'TypeName', T.Prefix, T.Name AS 'ItemDetailTypeName', T.ItemDetailTypeID FROM [Item].ItemDetails I INNER JOIN Item.ItemDetailStatus S ON I.ItemDetailStatusID = S.ItemDetailStatusID INNER JOIN [Item].ItemDetailTypes T ON I.ItemDetailTypeID = T.ItemDetailTypeID However, I already have StoredProcedures that return the exact same data from the ItemDetailStatus table and ItemDetailTypes table.Would it be better to do it above, and have more code to change when a new column/field is added, or more checks, or do something like:(This is not propper SQL) SELECT I.ItemDetailID, I.ItemDetailStatusID, I.ItemDetailTypeID, I.Archived, I.Expired, I.ExpireDate, I.Deleted, EXEC [Item].ItemDetailStatusInfo I.ItemDetailStatusID, EXEC [Item].ItemDetailTypeInfo I.ItemDetailTypeID FROM [Item].ItemDetails IOr something like that... Any thoughts?
I have two database SOP and CRM. Both supports windows authentication and SOP suports sql authentication too. Now i have to write a SP in SOP database with identity impersonation (with superadmin authentication) which will do some work with this impersonated id on SOP database but needs to fetch some values from CRM with the current user account - not impersonated account.Lets clear... I want to show the orders generated by all users and in the display grid there is a column like "IsMyCustomer?" which will show the order is to a customer which i have access. In CRM (MS) if i select from FilteredCustomer view i will get the customersid of those under me. And if i left outer join with FilteredOrder view in SOP (with Super Admin windows credentials) which returns orders by current user i will get the desired result.Now the problem is i can't sent two connection credentials to a SP. So what i want is to connect SOP with user's windows credentials (not with impersonation) and from the SP we will Select data with Admin's account. But i don't know is there any way to connect to a linked server with a different credentials. Like when i am selecting from CRM server it will use different credentials.Remember i am using SQL server 2000 and everything should be done through a single SP.I know i can do this easily with two different select from Data access layer. But i am looking for some performance effectinve way. My PM wants this idea to be implemented. I have no chice guys....
I have a stored procedure that selects the unique Name of an item from one table.
SELECT DISTINCT ChainName from Chains
For each ChainName, there exists 0 or more StoreNames in the Stores. I want to return the result of this select as the second field in each row of the result set.
SELECT DISTINCT StoreName FROM Stores WHERE Stores.ChainName = ChainName
Each row of the result set returned by the stored procedure would contain:
ChainName, Array of StoreNames (or comma separated strings or whatever)
I've got a stored proc to insert a record and return the id of the record inserted in an output param.How do I access this value in my code after the proc is executed? param = comm.CreateParameter();param.ParameterName = "@MemberID";param.Direction = ParameterDirection.Output;param.DbType = DbType.Int32;comm.Parameters.Add(param); try{ rowsAffected = GenericDataAccess.ExecuteNonQuery(comm);}catch { rowsAffected = -1;}
Hi guys I know this is a really common question, and I have read loads of replies on it but everything I try does not work. I have written a small stored procedure in SQL server to upload images to a table and return the new ID using scope_identity. I have tested it and it works fine. here it is:******* @siteID numeric(18,0), @imgNum numeric(18,0), @title NVarchar(50), @MIMEtype nchar(10), @imageData varbinary(max)ASBEGINSET NOCOUNT ONdeclare @imageID intINSERT INTO [site_images] ([img_siteID], [img_num], [img_title], [img_MIME], [Img_Data]) VALUES (@siteID, @imgNum, @Title, @MIMEType, @ImageData) SET @imageID = SCOPE_IDENTITY()RETURN @imageIDSET NOCOUNT OFF************If I run this in management studio express it runs fine and returns the ID under 'return value'. The problem I have is trying to actually call that return value in VB. If I try using these lines:Dim returnParam As SqlParameterreturnParam = New SqlParameter("@imageID", SqlDbType.UniqueIdentifier)returnParam.Direction = ParameterDirection.OutputcmdTest.Parameters.Add(returnParam)withcnBKTest.Open()cmdTest.ExecuteNonQuery() imageIDparam = returnParam.value.toStringcnBKTest.Close() I get the error "procedure has too many arguments specified"And if I try to access the return value like this: imageIDparam = cmdTest.Parameters("@return_value").ValueI get the error "@return_value is not contained by this sqlparametercollection" What am I doing wrong? Any help would be greatly appreciated. Robsa
I have written this stored procedure but I get no return value (neither 0 nor 1). What I hope is when the transaction successful, return value 1. If fails, return value 0.1 set @TransactionOk = 0 2 3 BEGIN TRAN 4 5 UPDATE WhiteList_IMEI SET WhiteList_IMEI_Used = 1, Whitelist_IMEI_UsedDate = getdate() 6 WHERE WhiteList_IMEI_Code = @IMEICode_New 7 8 IF @@ERROR <> 0 9 BEGIN 10 ROLLBACK TRAN 11 12 PRINT ('Error. Contact Software Engineer.') 13 RETURN 14 END 15 16 COMMIT TRAN 17 set @TransactionOk = 1
Hi, I have been trying to this this for quite a while with no joy can someone please tell me the error of my ways. I am trying to add a new record by stored procedure, this I can do, but my problem lies with the returnvalue part of the procedure. I cannot get it to work. When I debug it tells me that the "Specified cast is not valid" see C# code as i comment the line where it errors. I enclose a sample stored procedure and its c# code. Please can someone tell me where I am going wrong? as this is annoying me alot SQL:create procedure SPUAddVehicleInsert @VehicleDetailsRegistrationNumber varchar(50), @VehicleDetailsMake varchar(50), @VehicleDetailsModel varchar(50), @NID bigint =null as insert into tblvehicledetails ( VehicleDetailsRegistrationNumber, VehicleDetailsMake, VehicleDetailsModel,
