Adding A Article Causes ALL Articles To Be Refreshed
Sep 5, 2007
I have setup Transactional replication in SQL 2005 between two servers and have about 200 tables being replicated. The problem is that every time, I add or drop a table to replication, and start the Snapshot agent, it re-initializes every article and re-loads every article. This process takes 1 hour to complete and CPU usage goes to 100% during that time.
This behaviour seems very different from SQL 2000 where I would start Snapshot agent and only the relevant tables were added/dropped.
Has that functionality changed from 2000 to 2005? Am I not doing something right?
Thanks,
Amir
View 3 Replies
ADVERTISEMENT
Jun 7, 2004
Hello,
i want to Select all articles form a category without an article that is selected.
Thanx a lot !
View 1 Replies
View Related
Mar 4, 2004
Hey All - Another replication question:
Using VBScript in an ActiveX module of a DTS package...
Anyone have an idea how to add ALL articles to a Subscription.
The only way I can figure it is to load an array from sysobjects, then run sp_addarticle on each one.
Thanks for your help
RobbieD
View 2 Replies
View Related
Mar 27, 2008
how to add new article within the existing replication
View 1 Replies
View Related
Feb 11, 2005
Hi All,
I am having a server where replication is set up between 2 differnt databases. It is currently running. I want to add a couple of tables to the replication. I tried using sp_addArticle, but after executing it, in the properties of the publication it shows the new tables, but at the database level the tables are missing.
I tried with sp_addsubscription but I am getting strange error:
Server: Msg 14100, Level 16, State 1, Procedure sp_addsubscription, Line 240
Specify all articles when subscribing to a publication using concurrent snapshot processing.
What can I do to publish the tables into the target database?
Thanks in advance.
View 5 Replies
View Related
Feb 23, 2006
Hi
-- edited 26/02 to clarify the security model --
Using HTTPS merge replication
The subscriber was able to get the snapshot ok, then synchronise fine
However after adding an article to the publication and recreating the snapshot I get this error now at the subscriber
Microsoft.SqlServer.Replication.ComErrorException (0x80004005): A failure occurred when accessing 'usp_misc_dailyTasks_3.sch' due to an operating system error [2='The system cannot find the file specified.'] during Web synchronization. Ensure that the -InternetLogin user when using basic authentication and the user running the merge when using Windows integrated authentication has been granted access to the snapshot share.
at Microsoft.SqlServer.Replication.MergeSynchronizationAgent.Run()
The key properties when synchronising are as follows:
agent.PublisherSecurityMode = SecurityMode.Standard
agent.DistributorSecurityMode = SecurityMode.Standard
agent.InternetSecurityMode = SecurityMode.Standard
In order to create the subscription:
subscription.UseWebSynchronization = True
subscription.InternetUrl = webSyncUrl
subscription.InternetSecurityMode = AuthenticationMethod.BasicAuthentication
subscription.SubscriberType = MergeSubscriberType.Anonymous
subscription.SyncType = SubscriptionSyncType.Automatic
Thanks
Bruce
View 1 Replies
View Related
Sep 26, 2014
I have an existing publication in sql 2012 with 2 articles, and then I add 2 more articles. After that when I generate a snapshot, will the snapshot be generated for 2 new articles only or for all 4 articles?
I remember adding 1 new articles to one existing publication with 150 articles and when I generated snapshot, it was generated only for 1 article. But I don't remember clearly.
Does it behave differently for small and large number of articles?
-----Table Proc Index Performance TSQL &&%$#@*(#@$%.......------------
View 0 Replies
View Related
Aug 5, 2014
In my local environment , i was setup transnational replication then i have added new article by using below script
EXEC sp_changepublication @publication = 'demo', @property =
N'allow_anonymous', @value='TRUE'
Go
EXEC sp_changepublication @publication = 'demo', @property =
N'immediate_sync', @value='TRUE'
EXEC sp_addarticle @publication = 'demo', @article ='employee',
[Code]....
But article not added and showing this error message The initial snapshot for article 'employee' is not yet available.
What is the issue, what can i do to add new article ? What did I mistake?
View 2 Replies
View Related
Jul 13, 2006
First of all; My Oracle publication works fine when I don't explicit specify the shema_option parameter for the articles I'm adding to the publication. The reason why I then want to explicit specify the parameter is as following.
I'm developing a replication solution to get data from our production server (Oracle) to our Data Warehouse (SQL Server). The SQL Server (and the Data Warehouse code) uses the SQL_Latin1_General_CP1_CI_AS collation. When I don't explicit specify the schema_option, the nvarchar columns of the replicated tables are created using the SQL_Latin1_General_CP1_CS_AS collation and this results in some comparison errors, when for instance a select statement is trying to compare two nvarchar strings using different collations.
I've tried to specify the schema_option parameter as "@schema_option = 0x80" (Replicates primary key constraints.) to avoid the use of the SQL_Latin1_General_CP1_CS_AS collation when creating the destination tables - I'm not sure it's enough? No matter what, I'm getting an error when I'm doing it (see below).
Message
2006-07-13 12:00:15.529 Applied script 'ITEMTRANSLATION_2.sch'
2006-07-13 12:00:15.544 Bulk copying data into table 'ITEMTRANSLATION'
2006-07-13 12:00:15.544 Agent message code 20037. The process could not bulk copy into table '"ITEMTRANSLATION"'.
2006-07-13 12:00:15.591 Category:NULL
Source: Microsoft SQL Native Client
Number: 208
Message: Invalid object name 'ITEMTRANSLATION'.
2006-07-13 12:00:15.591 Category:NULL
Source:
Number: 20253
The questions are now whether I actually have a schema_option alternative for Oracle Publishing? If so, what is the solution, and eventually how can I avoid the error stated above?
If I'm not able to avoid the article columns getting created with the "wrong" collation, is there then any other obviously solution to the problem?
Thanks!
Best regards,
JB
View 5 Replies
View Related
Apr 18, 2008
Hi All,
I have created a DTS package to export daily load to ftp folder. It has couple of sql tasks, global variable to hold the sql result set and vb script to read results from global variables, create files to upload them to ftp folder. The DTS running to success and uploading files with latest data to ftp when I run it manually. But, when I schedule it, it€™s not picking the latest data from the database. It€™s uploading files with old data (the data it picked up was the data it picked when I scheduled it for the first time). I think the result set is being cached somewhere. But the €˜Turn on Cache€™ property is unchecked.
Is there any settings we have to do while scheduling the job?
Thanks,
Muthu
View 1 Replies
View Related
Jun 18, 2015
My boss and I attended the SQL conference in Vegas a few years ago. He remembers a session on tabular where the presenter said when the underlying table that tabular is built on changes, it automatically refreshes the tabular db. Now that we're working on a tabular project I'm looking around for this information and don't find anything like that happens. From what I can see, the refresh either has to be scheduled from a task, or manually refreshed by right-clicking the db and selecting "process db". He said the session presenter was a Microsoft Program Manager too. Is there any truth to what he remembers?Â
View 2 Replies
View Related
Mar 27, 2008
I'm relatively new to Report Designer in VS 2005 and have been trying to get a parameterised report working.
I have an MDX query that works with the datasource I set up, but as soon as I try to add a parameter, the fields disappear from the dataset.
Here's the query:
Code Snippet
SELECT
NON EMPTY { [Measures].[Var Rc] }
ON COLUMNS,
NON EMPTY { ([Time].[Year - Quarter - Month - Date].[Date].ALLMEMBERS *
[Company Master].[Region].[Region].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME
ON ROWS
FROM
( SELECT ( Filter( [Company Master].[Region].[All].Children,
Instr( [Company Master].[Region].Currentmember.Properties( 'Member_Caption' ), @RegionParam ) > 0) )
ON COLUMNS FROM [Supplier Spend])
CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
This is all a generated query apart from the filter. If I change the @RegionParam back to its old constant value (which was 'Europe') then the fields appear again. I've set up the Query Parameters to cope with @RegionParam and also put a Report Parameter in the Layout page that uses it.
I'm lost as to why the fields don't appear with the parameter in there...
Rob
View 2 Replies
View Related
Apr 23, 2015
I have set the slicers on paritions using Script task.
After cube process, the mdx queries are not hitting partitions as per Slicers.
But once i open each partition slicers from SSMS and close it by doing ok. My mdx query is good enough to hit the relative partition only.
But it is not possible to manually refresh each slicer on partition.
Is there any way out to solve this issue. I am using 2008 R2.
View 2 Replies
View Related
May 11, 2006
hi all,
I was trying to set the articles to
"delete data in the existing table that matches the row filter"
in the publications "article>articles>table articles>snapshot" of
the publication
but everytime i reopen that property tab
the publication restore to the
default setting of "drop exisiting table and recreate it"
i"m using sql server 2000. snapshot replication--
thanks,
------------------------------------
joey
View 1 Replies
View Related
Apr 22, 2008
Hello,
maybe anyone knows good books or articles about ETL, ETL processes, ETL optimization ?
If you know where i can download - post a link
Thanks
View 4 Replies
View Related
Jun 19, 2007
Is there a way in T-SQL to programmatically list all the articles? What I'm wanting to do is grab these articles and run this SP:
EXEC sp_publication_validation 'people', @rowcount_only=2, @full_or_fast=0
For each aritcle/publication, but I need a way to programmatically calculate the 'people' article in this case and pass that information along to the sp_publication_validation SP.
Is there a way, perhaps in system tables or system SP to accomplish this?
Thanks,
Phil
View 3 Replies
View Related
May 30, 2006
I have a design that includes articles that will be searched. Obviously its too slow to put them into fields, and impossible because some have photos or are otherwise html documents. So I want to put pointers to their location.
Two questions. For each deployment, both desktop and web, where is the best place to put the articles. In any folder, or only in an iis virtual folder?
dennist685
View 5 Replies
View Related
Oct 25, 2007
Hello Everyonen and thanks for your help in advance. I am developing a conetnet management system to allow for the storage of articles within a SQL Server 2000 database. I am using FreeTextBox as the editor for users to enter articles. I ahve two questions. First, many of the articles are quite lengthy and including HTML formatting go well beyond 8000 characters. How should I go about storing these articles? Should I use a TEXT datatype, or perhaps split the data into more than one row. This leads to my second quuestion. Many sites that display article type data break the artilce into multiple pages with page numbers or next links to page back and forth. I am not sure hot to go about implmeneting this. Any help on this topic would be greatly appreciated. Thanks.
View 3 Replies
View Related
Jan 11, 2004
Hi every1,
Does anyone know where i would be able to find good articles on this subject:
-Best Practices (Logical - planning & Physical) in Setting up Database Projects for MSSQL Server 2000 with Visual Source Safe 6.0
*It would also be helpful if articles take replicated environments into consideration.
thankyou
View 3 Replies
View Related
Nov 4, 2006
Hi
where i can get good articles on indexes ?
View 2 Replies
View Related
Aug 13, 2015
I'm new to replication and set up a Snapshot Replication on the tables in my sample database. Â Everything seemed to work (database created on Subscriber instance, jobs set up, etc) but the articles (tables) are not being created in the subscriber's database. Â
I can see the files created in the folder but I don't see the tables or the data. Â Also, I confirmed that the articles are checked so they should be included.
View 6 Replies
View Related
Aug 7, 2007
Hello Friends
Can any body tell about the database jobs. what are the database jobs and how do they work.
If any body have any link relevant to it please send me as early as possible.
Thanks
SARB
View 1 Replies
View Related
Mar 12, 2008
I have a page which loads an article based on an ID, what i want to do now is when the article loads there will be a repeater control which holds headlines of related articles in it. My problem is how can i achieve this in terms of passing through the articleCategoryID to the stored procedure "stream_RelatedArticles".
This is my stored procedure that loads the initial article;
ALTER PROCEDURE [dbo].[stream_Articles]
as
SELECT TOP 5 articleID, articleTitle,articleDescription, articleAuthor,articleDatePublished,articleBody from Articles ORDER BY articleDatePublished
And this is the page_load;if (!IsPostBack)
{string strID = Request.QueryString["id"];
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["streamConnectionString"].ConnectionString);SqlCommand command = new SqlCommand("stream_ArticlesByID", conn);
command.Parameters.Add("@articleID", SqlDbType.Int).Value = Request.QueryString["id"];command.CommandType = CommandType.StoredProcedure;
conn.Open();SqlDataReader reader = command.ExecuteReader(CommandBehavior.CloseConnection);
ArticleList1.DataSource = reader;
ArticleList1.DataBind();
reader.Close();
}
And here is my related article stored procedure;ALTER PROCEDURE [dbo].[stream_RelatedArticles]@articleCategoryID INT
as
SELECT articleID,articleCategoryID, articleTitle,articleDescription, articleAuthor,articleDatePublished,articleBody from Articles
WHERE articleCategoryID = @articleCategoryID
View 6 Replies
View Related
Jun 10, 2005
Greetings,I have one table, named Article, and one table name Category.The problem is, one Article could be in just one or in several categories.What is the best way to connect data between Article and Category according to fast search performance?I have several ideas:1. To have third cross table Article_Category with fields Article_ID and Category_ID, and search Article_Category table 2. To have several INTEGER columns in Article table (like Category_ID1, Category_ID2,..) and search those columns3. Add one VARCHAR field in Article table where I could write Category ID's delimited by some character (e.g. by comma), and do text search in only that column.What is recommended for solving problems like this?
View 7 Replies
View Related
Dec 12, 2005
Guys,
Do you have articles on this? this is for my reference.
thanks!
View 1 Replies
View Related
Sep 15, 2006
I wonder if anyone can advise, I currently have a replication set to 5 offices. Which has been working fine for some 18 months+, then the replication dropped out. When I looked in the publisher it had lost all its articles and would not allow me to add back in. I deleted the publication and recreated it and then after creating a new snapshot starting rolling back out to the various locations, and one of the locations failed and again all the articles where lost. I deleted and rebuilt the database at that office and went through the same routine again, only for it to happen again, the issue being that now errors where produced!!!.
So at present I have the publication and all the subscriptions running apart from this one office.
Has anyone had this before, or any ideas. I have run a full virus scan just in case and it was fine.
View 3 Replies
View Related
Dec 19, 2005
Hello,
I have some articles already published and would like to change some of the articles default @conflict_retention of 14 days to 45 days. How can I accomplish this via t-sql? Thanks.
John
View 1 Replies
View Related
Jan 9, 2004
Tech firms defend moving U.S. jobs overseas (http://www.msnbc.msn.com/default.aspx?id=3899043&p1=0)
Any thoughts or comments?
View 14 Replies
View Related
May 20, 2008
Dear Friends,
Hi I am having a problem while showing Products from SQL
Server database. Exactly I have a table named Products which has some Products
posted by admin I want to show some latest Products on my default page
based on DateTime which are displayed like show last week articles,show last two weeks articles etc on button click I written my SQL query like: searchquery = "select * from Prducts where Date between '" + System.DateTime.Now.AddDays(-7).ToShortDateString() + "' and '" + System.DateTime.Now.AddDays(-1).AddHours(23).AddMinutes(59).AddSeconds(29).ToShortDateString() + "'"; If any body knows plz help me
View 3 Replies
View Related
Jan 27, 2015
We are runnning on SQL Server 2012 SP1 + CU9.
I have found some articles with no publication in our transactional replication.
For example, running this:
select p.publication,
a.publication_id,
a.article
from dbo.MSArticles as a
left outer join dbo.MSpublications as p
on a.publication_id = p.publication_id
shows this:
NULL1org_Community
NULL3org_Community
Purchasing to EDW5org_Community
NULL1org_Division
NULL3org_Division
Purchasing to EDW5org_Division
How can I get rid of the articles that are not part of a publication?
I can't use sp_droparticle because it requires a publication which these articles do not have.
View 1 Replies
View Related
Jul 21, 2015
I have been adding a lot of Articles for Publication.
They make it to the distributer but they do not make it to the subscriber.
If I add articles before the previous batch of articles get applied to the subscriber could that cause a problem and for replication to become out of sync?
It is a pull transactional replication.
I have had to generate a snapshot for the problem to go away but it keeps happening.
Fortunately it is not in production yet.
[URL]
View 0 Replies
View Related
Jun 9, 2008
Hi All -
Any recommendations for good advanced t-sql books/articles? I find myself involved with writing increasingly more complex queries and after spending a few hours on some, and then searching on this site for potential answers/help, I am wondering if there might be some good books on creating more advanced/complex t-sql for real world scenarios.
Thanks
- will
View 3 Replies
View Related
Aug 11, 2013
I would like to create a database & save to that data base the ratings of articles that are given by the users.
(I want to create a recommendation system.)
I am using joomla! How do I do this ?
View 1 Replies
View Related
