CDS ( Change Data Capture) In SSIS

Oct 17, 2007

Is there a built in functionality to do the CDS in SSIS 2005? if not, what is the best way to do this in ssis 2005?

View 2 Replies


ADVERTISEMENT

How Do You Implement Change Data Capture In SSIS Or SQL Server 2005?

Dec 3, 2007



Hi All,
I am now working on the design phase of my project, we are looking to implement Change Data Capture (CDC) but i need some help if you guys has implemented before using the SSIS 2005 componets. I am trying to use the Following:

Source---------Derived Column---------Lookup---------------Conditional Split (to split New records and Updated Records)-----------Destination. Respectively.
Lets make it clear, my source holds (Old records and newly added or Updated records), the Derived Column is to Derive new columns called Insert_Date and Update_Date. The Lookup i am Using is to look the Fact_Table(the Old Records) as Reference, and then based on this lookup i will split the records on timely based using the Conditional Split. My question is
1. Am i using the right components?
2. what consideration should i have to see to make it true (some Logics on the conditional split)?
3. Any script which helps in this strategy?
4. If you have a better idea please try to help me, i need you help badly.

Thank you,

SamiDC

View 11 Replies View Related

Change Data Capture

Jan 13, 2006

Again, looking for the best way to do this with SSIS.

I have a source table and I'd like to load it to a database daily, capturing what changed.

This is not a dimentional table but a fact table.

So, what I;d need to do for each record is to see if the record already exists (using business key) and if it does - compare some of the data fields and of there are changes - register it somehow and if not changes ignore.

Right now, the only two ways I see to do it with SSIS:

- Use Slowly Chaging Dimentions transformation

- Use Lookup and customize SQL, adding something like: WHERE key = ? and (field1 <> ? or field2 <> ?...)

I was wondering of there an easy way.

Dima.

View 3 Replies View Related

Server Change Data Capture

Jul 28, 2015

When using Change Data Capture on SQL Server 2012 I have researched that you cannot truncate data in a table. Is this also true if one wanted to delete data from the table? Getting a little confused about what DDL statements can be ran against a table with CDC enabled. Does CDC have to be disabled before performing certain DDL statements against a table?

I would like to safeguard the truncation and dropping of certain tables within the dbo schema. Wondering if I could do this with one fail swoop with CDC enabled on those tables. The other option would be to use a DDL trigger to prevent certain DDL statements to be performed.

View 2 Replies View Related

SQL Server Admin 2014 :: Change Data Capture(CDC) For Data Warehouse / Reporting?

Aug 12, 2015

I have a requirement to implement CDC for 50+ tables to implement incremental data changes warehouse/reporting rather than exporting the whole table data. The largest table is having more than half a billion records.

The warehouse use a daily copy of OLTP db (daily DB refresh). How can I accomplish this. Is there a downside in implementing CDC just for the sake of taking incremental changes on the tables?

Is there any performance impact if we enable CDC on OLTP db?

Can we make use of the CDC tables on the environment we do daily db refresh so that the queries don't hit OLTP database?

What is the best way to implement CDC to take incremental changes for reporting.

View 0 Replies View Related

SQL 2012 :: CDC (Change Data Capture) Is Not Capturing Data Correctly

Apr 21, 2014

I am using SQL Server 2012 and to me a part of data captured by CDC is not making sense.

I have a table called 'Schema.Table1', and I enabled CDC on it by running 'sys.sp_cdc_enable_table'. I see that a table called 'cdc.Schema_Table1_CT' got created which now gets an entry when ever I Insert, Update or delete a record in the original table.

Till this point every thing works fine.

My original Table has a NOT NULL INT column called 'AuditTrackerUserID' with a default value of 1996. My application does not provides a value for this column, but because the column itself has a default value, records get inserted without error.

When I try to execute the following Query I see multiple records with __$operation of 3 and 1.

SELECT * from cdc.Schema_Table1_CT where AuditTrackerUserID IS NULL

My expectation is that I should not ever see any record returned by this query because AuditTrackerUserID is a not null column, but I do.

View 2 Replies View Related

Modifying Change Data Capture Tables?

Oct 29, 2015

We have enabled Change Data Capture for auditing our table changes in SQL Server 2008. There is a request to NULL out a few columns (for all rows) in a couple CDC tables, due to compliance with a certification. Is there a compelling reason not to modify these tables and to leave the audit trail as-is?

View 1 Replies View Related

Recovery :: Replication With Change Data Capture

Jul 14, 2015

SQL Server 2008R2: Enabling Change Data Capture on a replicated database or its tables will have any performance impact on existing transactional replication.Is it possible to use both of them con temporarily.

View 5 Replies View Related

SQL Server 2014 :: Change Data Capture - Minimum Latency?

Jan 28, 2015

I am trying to use change data capture to load the data into the secondtable from table 1 which is coming from UI.

What will be the minimum latency??? Can we use incase of latency less than 5 seconds.

View 1 Replies View Related

Transact SQL :: Capture Data Change From Multiple Table Joins

Jun 9, 2015

I have 5 tables that are joined respectively,

Each one of the tables listed below has a “CreateDateTime” and “UpdateDateTime” fields, I need to get yesterday changes, I can get any record where either CreateDateTime or UpdateDateTime is greater than midnight yesterday butI need to watch dates on all of the tables so I need to do atleast 10 date checks.

If any table shows an updated or created record, I need to gather ALL of the information for that customer.  So, if my name didn’t change (SCUS table), but my email does (SEML table), I have to pull out both the SCUS and SEML tables (and the others, of course).  So It may not be simple WHERE clause, How can I achieve this:

SELECT 
SCUS.CUSFULLNAME
,
SCUS.CUSMIDDLENM
,      
SCUS.CUSLASTNM ,
 
[Code] ....

View 3 Replies View Related

SQL Server 2008 :: Does Change Data Capture Require A Table Have Primary Key

Jan 13, 2013

Or can it record before and after column changes based on the LSN only?

An extract from a file based legacy accounting system is performed every night. The system does not have a primary key because transactions are managed through program code. (the more things change...). The extract is copied to text in Unix and FTP'd to Windows, where the file is loaded into SQL Server by kill & fill. Because of the expense of modifying the source system, there is enormous inertia/resistance to injecting a primary key at the source, so kill & fill it stays.

In reading about Change Data Capture, it seemed to me that column level insert update and delete are stored in tables that remember the before and after content of each column tracked. In my reading I have seen many references to the LSN to decide when and what to record as changed, but I have not seen any refereference to the necessity of a primary key for Change Data Capture to work. This is in contrast to replication, where the requirement for the existence of a primary key is made plain.

Is it possible to use Change Data Capture against a table without a primary key? How to use it to change the extract from kill and fill to incremental.

View 9 Replies View Related

How To Force Deferred Update To Create Two Rows In Change Data Capture

Mar 23, 2015

I have located a bug in the functions cdc.fn_cdc_get_net_changes_<capture_instance> generated when you enable cdc on a table. This bug can be triggered if 2 rows are created in the _CT table having the same values for the __$start_lsn, __$seqval and the table's key column(s). From research on the internet I have found such rows can be created by a "deferred update": a single update statement in which a column that is part of a unique constraint is updated.

In order to report the bug with Microsoft I need to create a complete series of steps-to-reproduce. But even though the situation happens several times a day in our production environment, I have not yet been able to reproduce it in my test environment.I need a single update statement (plus maybe some steps in advance) that make that the log reader inserts 2 rows into the _CT table, one with __$operation = 1 (delete) and another with __$operation = 2 (insert) as opposed to the single row with __$operation = 4 that it inserts for a normal update. Below is the script I have so far to create a fresh database, enable cdc, create a test table, insert some data and update this data.

I would have liked the last update statement to be handled as a "deferred update". However in all of my tests the log reader just simply inserts a single row into the cdc.dbo_NETTEST_CT table.how to reproduce the situation where I get the 2 rows with __$operation 1 and 2 from a single update statement instead of the single row with __$operation = 4.

CREATE DATABASE [cdcnet]
CONTAINMENT = NONE
ON PRIMARY
( NAME = N'cdcnet', FILENAME = N'S:SQLDATAcdcnet.mdf' , SIZE = 4096KB , FILEGROWTH = 1024KB )
LOG ON
( NAME = N'cdcnet_log', FILENAME = N'T:SQLLOGcdcnet_log.ldf' , SIZE = 1024KB , FILEGROWTH = 10%)

[code]....

View 4 Replies View Related

SQL 2012 :: Cannot Truncate Table Because It Is Published For Replication Or Enabled For Change Data Capture

Jul 8, 2015

I get the following error message when a job calls a Stored Procedure that TRUNCATES a Table:

Cannot truncate table 'CombinedSurveyData' because it is published for replication or enabled for Change Data Capture

Is my only option to change the TRUNCATE to DELETE?

[URL]

View 2 Replies View Related

SSIS Load Data - Capture Error

Jul 24, 2015

I want to create a SSIS package as follows

Conditions
If there are about 100 records in text file, if there is an error at 43 and at 67 record respectively , it should capture 43 and 67 record in failure folder and remaining 98 records , should be processed

1) Successful record into table and move the success record from the folder
to new path say( Success folder) (98 records to table)
2) Unsuccessful records to new path (Failure folder) (2 lines )
3) Error message to capture the failed records and store them in another folder(Error log) (2 line failure information)

While writing the 3rd condition to error log table , it has to point out the record which is failed for what reason, say it may be due to invalid data type for column 10 for 43 record, and incorrect syntax error at 67 record.

View 9 Replies View Related

Integration Services :: Status Change Capture

May 21, 2015

I have a task where I'm dealing with Employee information. I load this data on a daily basis where I capture Name,Is_Active,Address information of the employee and I do truncate and load operation. Now I have a task to have a additional column called 'Statuschanged_dt' and have to capture the date when Is_Active changed from 'Yes' to 'No'. I know this can done in multiple ways like destination lookup, SCD and also CDC.

View 9 Replies View Related

SQL 2012 :: How To Capture Data Flow Component Name Dynamically While Package SSIS Package Is Executing

Jun 3, 2014

I would like to fetch the data flow component name while package is executing. Since system variable named [System::SourceName] only fetches name of the control flow tasks? Is there a way to capture them?

View 5 Replies View Related

SQL Server 2014 :: Capture Each Change In Database Without Updating Earlier Status

Jan 22, 2015

I have a matrix table. These status can be changed by the user and I want to capture each change in database with out updating the earlier status

Pending
Activated
In PROGRESS
Submitted
Completed

Pending can be changed to submitted or completed. For one form there can be different status at different time. And each status must be saved in the database table. How can I design a table...

View 2 Replies View Related

SSIS - Change Data Organisation

Oct 1, 2007

Hi,

here is my problem
i've a table in my database like this

Col1 | Col 2
____|______
aaa | 111
aaa | 222
aaa | 333
bbb | 222
bbb | 333


to insert data into a flat text file or another table
i would like to make a dataset like that :

Col1| Col2| Col3 | Col4
____|____|_____|_____
aaa | 111 | 222 | 333
bbb | 222 | 333 | NULL

the table is quite big, so i can't make it line by line

i would like to have a maximum of 12 column ( if there is more data than 12, these data should be ignored )

thanks for answering

View 3 Replies View Related

Integration Services :: How To Change SSIS Packages Deployed To MSDB - Image Data Type

Jun 22, 2014

Is there a way to change an image data type? I want to make a change to some deployed SQL 2008 SSIS deployed packages. I have a TSQL SELECT that searches the packages for a string. But I would like to be able to change a string. I have googled it but cannot find anything.

View 5 Replies View Related

How To Capture Validation Errors Inside SSIS Package

Oct 24, 2007

Hi

I have created a package which executes every 10 mins. Last week end for maintenance purpose, I shutdown my database. Now as an initial execution process, my package does the default validation steps on which the database connection validation step fails. As this is the default functionality of SSIS I am not able to capture this error. Is there anyway to capture this error inside SSIS Package?

Thanks in advance.

Gnan

View 3 Replies View Related

Capture Errors From SSIS Execute Process Task

Jul 22, 2006

I have an Execute Process Task within my package that executes a BCP command which outputs the resultset of a query to a file in the network share. It works fine most of the time, however sometimes for unknown reasons, the following error message gets logged in my log table -
In Executing "c:Program FilesMicrosoft SQL Server90ToolsBinncp.exe" "Select Comments, SoldToCustomerNbr, ProductGroupingCode, ProductGroupingName, RevSumCategoryCode, RevSumCategoryName, ValidFromDate, DTSCollectPct, DTSPrepaidPct, DTSPickUpPct, DCCollectPct, DCPrepaidPct, DCPickUpPct From ShipmentTypeCustomerBlend" queryout \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt -c -t" " -SDummyServer -T -e"d:SSIS Error LogsJob ExecutionBcpErrors.log" at "", The process exit code was "1" while the expected was "0".

The above error was captured from the System::ErrorDescription variable, by the error event handler, that was attached to the Execute Process Task. This error does not help me to debug the issue.

On running the below statement from the command prompt, i get the actual error message, which is the expected behavior -

"c:Program FilesMicrosoft SQL Server90ToolsBinncp.exe" "Select Comments, SoldToCustomerNbr, ProductGroupingCode, ProductGroupingName, RevSumCategoryCode, RevSumCategoryName, ValidFromDate, DTSCollectPct, DTSPrepaidPct, DTSPickUpPct, DCCollectPct, DCPrepaidPct, DCPickUpPct From ShipmentTypeCustomerBlend" queryout \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt -c -t" " -SDummyServer -T -e"d:SSIS Error LogsJob ExecutionBcpErrors.log"

Expected Error Message -

Unable to open BCP host data-file.

This error message indicates that either the network path - \xxxLOG is not available for the output file creation or the file - \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt could not be created for some reason.

I 've tried to capture the error message from the StandardErrorVariable and the StandardOutputVariable properties of the ExecuteProcess Task, but in vain.

Is this a bug ? If so, is there a way to get the actual error message from the task ?

Thanks,Reni

View 5 Replies View Related

Capture Data For Yestarday's Date

Sep 3, 2007

I have a table with a field "StartedAt". I wish to capture all the data in that table which has Yestarday's StartAt date.
My script below captures the data which has yestardays "StartedAt" info as well as today's date till now. How can i capture only yestardays info only.

SELECT StartedAt
FROM myTable
WHERE StartedAt >= DATEADD(day, DATEDIFF(day, 0, getdate()), -1)

please help.

View 5 Replies View Related

How To Capture Data And Tune Indexes With Wizard

Jul 7, 1999

I want to tune the indexes on my database and I am trying to use the SQL Server Profiler to collect data for the Index tuning wizard to analyze. My question is what do I need to trace with the profiler so that the Index tuning wizard can work? I am looking at the trace properties in Profiler at the Events, Data Columns, and Filters tabs but I have no idea of what I need to capture.

Thanks in advance.

Mike

View 1 Replies View Related

Join Query-capture Excluded Data

Sep 26, 2007

I have 2 tables, table one with 772 pieces of compliant data. Table 2 has 435 pieces of data that meet another criteria (all the columns are identical it was just passes through an additional filter). I need to capture the values that are excluded from table 2.

Example Table 1
ID some value
1 x
2 x
3 x
4 x
5 x

Table 2
ID some value
2 x
3 x
5 x

I need to capture the data from ID 1 and 4 and assign a new value to it, it is extra compliant data. Thanks!

View 2 Replies View Related

Integration Services :: Capture Changed Data Into Target

Jun 25, 2015

My objective is to extract the source table data from SQL/Oracle or CSV files and load into destination table using CDC mechansim. May I know the steps required to implement in production from development.

View 3 Replies View Related

Need To Capture Actual Data In Row On Error To Flat File

Sep 18, 2007

Let me preface by saying I am not very familiar with SSIS.

Ideally, since the Transfer SQL Server Objects task can do all tables, I would like to use it to copy only data from one server to a new server that has the tables pre-created. When I encounter any kind of error, in addition to the error information provided by SSIS, I also need the actual row data.

If using the Transfer Object task can't do that, how would I loop through all the tables on an OLEDB source and capture the same error information on the destination? I figured out how to do the Data Flow a table with a redirect error output but that does not give me the actual row data.

View 7 Replies View Related

Data Collection On Production Server To Capture Growth Rates

Mar 18, 2015

I setup data collection on a production server to capture growth rates.

When I run the dis usage report, it shows a daily growth rate of over 500 megs. This seems excessive to me.

As a troubleshooting step I then ran sp_space used and got these results:

database_namedatabase_sizeunallocated space
rgc_prod 273442.63 MB3648.48 MB

reserved data index_size unused
265345488 KB164385384 KB99826072 KB1134032 KB

What should my next steps be to try and determine why there is so much growth? And isn't the index size rather large?

View 1 Replies View Related

Capture Data From Excel File And Load Into Staging Table - Annual Count

Jul 31, 2013

I am working on an HR project and I have one final component that I am stuck on.

I have an Excel File that is loaded into a folder every month.

I have built a package that captures the data from the excel file and loads it into a staging table (transforming a few bits of data).

I then combine it with another table in a view.

I have another package that loads that view into a Master table and I have added a Slowly Changing Dimension so that it only updates what has been changed. (it’s a table of all employees, positions, hire dates, term dates etc).

Our HR wants to have this data in a report (with charts and tables) and they wanted it to be in a familiar format. So I made a data connection with Excel loading the data into a series of pivot tables.

I have one final component that i cant seem to figure out. At the end of every year I need to capture a count of all Active Employees and all Termed employees for that year. Just a count.

So the data will look like this.

|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |

The data is in one table labeled [EEMaster]. To test the count I have the following.

SELECT COUNT([PersNo]) AS HistoricalHC
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Active'

this returns the HistoricalHC for 2013 as 418.

SELECT COUNT([PersNo]) AS NumbOfTermEE
FROM [dbo].[EEMaster]
WHERE [ChangeStatus] = 'Current' AND [EmpStatusName] = 'Withdrawn' AND [TermYear] = '2013'

This returns the Number of Termed employees for 2013 as 42.

I have created a table to report from called [dbo.TORateFY] that I have manually entered previous years data into.

|Year|HistoricalHC|NumbTermedEmp|
|2010|447 |57 |
|2011|419 |67 |
|2012|420 |51 |

I need a script (or possibly a couple of scripts) that will add the numbers every year with the year that the data came from.

(so on Dec 31st this package will run and add |2013|418|42| to the next row, and so on.

View 20 Replies View Related

Integration Services :: How To Capture Changed Data Of 2 CSV Files And Modify It In Oracle Database

May 6, 2015

I need reflecting changes of csv file in oracle DB. Suppose,  I load single csv file in oracle DB which contains 10 rows. After some time, I have loaded another CSV file which has the modified row of the previously loaded csv file. So, how can I capture the CSV changes and how it is going to get reflected in oracle DB?There is no unique column in csv file to identify particular row.

View 3 Replies View Related

SQL Server 2008 :: Capture Database / Server Name In A Derived Column To Identify Source Of Data?

Feb 1, 2012

I am task with identifying the source database name, id, and server name for each staging table that I create. I need to add this to a derived column on all staging tables created from merging same tables on different servers together.

When doing a Merge Join, there is no way to identify the source of data so I would like to see if data came from one database more than the other servers or if their are duplicates across servers.

The thing that bugs me about SSIS Data Flow task is there is no way to do an easy Execute SQL Task after I select my ADO.NET Source to get this information because my connection string is dynamic and there is no way of know which data source is being picked up at runtime.

For Example I have Products table on Server 1 and 2:

Server 2 has more Products and would like to join the two together to create a staging table.

I want see the following:

Product ID, Product Name, Qty, Src_DB_ID, Src_DB_Name, Src_Server_Name
1 IPAD 1000 2, MyDB1, Server1
100 ASUS Pad 40 1, YourDB, Server2

get database name and server name in DATA FLOW only (without using a for each in Control Flow)

View 5 Replies View Related

Refresh SSIS Pkg To Get The Change

Sep 19, 2007

Hi, all,

How do you refresh a SSIS pkg to get the latest table schema change?

I have this data flow task that will load data from a flat file into a table.

I got a Warning: Truncation may occur due to retrieving data from database column "txtSNumber" with a length of 50 to data flow column "txtSNumber" with a length of 20.

Then I went into Management Studio and changed the column size.
Now in my dev BID I got next:
[SQL Server 05[82]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "txt..." needs to be updated in the external metadata column collection.

I think this means my change on the table did not get into my ssis, and I could not find a way to refresh.

Thanks!

View 3 Replies View Related

Refresh SSIS Pkg To Get The Change

Sep 20, 2007

Hi, all,

How do you refresh a SSIS pkg to get the latest table schema change?

I have this data flow task that will load data from a flat file into a table.

I got a Warning: Truncation may occur due to retrieving data from database column "txtSNumber" with a length of 50 to data flow column "txtSNumber" with a length of 20.

Then I went into Management Studio and changed the column size.
Now in my dev BID I got next:
[SQL Server 05[82]] Warning: The external metadata column collection is out of synchronization with the data source columns. The column "txt..." needs to be updated in the external metadata column collection.

I think this means my change on the table did not get into my ssis, and I could not find a way to refresh.

Thanks!

View 5 Replies View Related

How To Change Xml With Xslt In Ssis

Mar 3, 2008

Hi,

I've got a problem with my ssis package.
I have a webservice, which from i am downloading xml file which looks like this:









Code Snippet

<?xml version="1.0" encoding="utf-16"?>
<DataSet>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="NewDataSet" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="Table">
<xs:complexType>
<xs:sequence>
<xs:element name="lukas_id_nagrody" type="xs:string" minOccurs="0" />
<xs:element name="ilosc" type="xs:int" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
<NewDataSet>
<Table diffgr:id="Table1" msdata:rowOrder="0">
<lukas_id_nagrody>10</lukas_id_nagrody>
<ilosc>4</ilosc>
</Table>
<Table diffgr:id="Table2" msdata:rowOrder="1">
<lukas_id_nagrody>12</lukas_id_nagrody>
<ilosc>10</ilosc>
</Table>
<Table diffgr:id="Table3" msdata:rowOrder="2">
<lukas_id_nagrody>21</lukas_id_nagrody>
<ilosc>32</ilosc>
</Table>
<Table diffgr:id="Table4" msdata:rowOrder="3">
<lukas_id_nagrody>32</lukas_id_nagrody>
<ilosc>13</ilosc>
</Table>
<Table diffgr:id="Table5" msdata:rowOrder="4">
<lukas_id_nagrody>33</lukas_id_nagrody>
<ilosc>15</ilosc>
</Table>
<Table diffgr:id="Table6" msdata:rowOrder="5">
<lukas_id_nagrody>34</lukas_id_nagrody>
<ilosc>2</ilosc>
</Table>
</NewDataSet>
</diffgr:diffgram>
</DataSet>

And i want it to looks like this:






Code Snippet

<?xml version="1.0" encoding="utf-16"?>
<DataSet>
<xs:schema id="NewDataSet" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
<xs:element name="DataSet" msdata:IsDataSet="true" msdata:UseCurrentLocale="true">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="unbounded">
<xs:element name="Table">
<xs:complexType>
<xs:sequence>
<xs:element name="lukas_id_nagrody" type="xs:string" minOccurs="0" />
<xs:element name="ilosc" type="xs:int" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:schema>
<Table id="Table1" rowOrder="0">
<lukas_id_nagrody>J07Z0</lukas_id_nagrody>
<ilosc>1</ilosc>
</Table>
<Table id="Table2" rowOrder="1">
<lukas_id_nagrody>J08Z0</lukas_id_nagrody>
<ilosc>1</ilosc>
</Table>
<Table id="Table3" rowOrder="2">
<lukas_id_nagrody>J09Z0</lukas_id_nagrody>
<ilosc>1</ilosc>
</Table>
</DataSet>

Can You help me?

Thanks in advance

ps. sorry for my english

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved