Is it possible to change the command buffer size??
I need to export data on demand to an excel spreadsheet via a stored procedure. The only way I know how to do this is through a bulk copy command; but my query is much to big for the buffer....
Thanks!!!
I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies View RelatedWe have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".
View 2 Replies View RelatedHi thereAnybody know how to increase the MS SQL server buffer size?I get an error when trying so insert some pictures as OLE objects. Whentransfering to the server i get an error, that the buffer sizes needs tobe increased.RegardsRudi W.
View 1 Replies View RelatedHi
I've been searching this site and the Web for info on an error message I get when importing from Access 2003 into SQL Server 2000.
'Data for Source Column 3('Col3') is too large for the specified buffer size'
A memo field in Access is larger than 255.
I have followed advice about putting the field to the first column. This doesn't work - the error just returns the new column number. In fact, I've tried just importing the first column - no good.
I am wary about making Registry changes as comments on the Web say this doesn't work either.
Does anybody have the solution for this.
Paul
Error: "The specified buffer size is not valid. [buffer size specified = 0]
Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:
Im working on a c# (.net 2.0) project and loaded data
(one column from one table, 800 rows, text, no greater than 80characters in length)
from an access db into a data set, then lnserted the data in SQLce, great it works fab!
but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...
what have i missed???
Hi,
I'd like to replicate an SQL Server Database to an SDF file. For Simplicity I want to use the SQL Server 2005 Management Console. The Console reports that the maximum buffer size were to small. In the comment (c# code) I can see it is set to 512. How can I increase the value in the replication assistant?
Miroslaw
I'm trying to query a table where in the data in a cell is 65KB and when i try to do a SELECT I am unable to get the entire data from the cell.
SELECT CAST(Xml_data as XML) from TableName where ID=100
Error Message: Msg 9448, Level 16, State 1, Line 1 XML parsing: line 241, character 76, well formed check: undeclared entity
Hi all
I am Importing data from CSV to Table using DTS package it showing error "exceeded Buffer size",
What is Buffer size of varchar in SQL Server2000
Appreciated your help
Hello there,I have and small excel file, which when I try to import into SQlServer will give an error "Data for source column 4 is too large forthe specified buffer size"I have four columns in the excel file, one of the column contains alarge chunk of data so I created a table in SQL Server and changed thetype of the field to text so I could accomodate this field but stillno luck.Any suggestions as to how to go about this.Thanks in advance,Srikanth pai
View 5 Replies View RelatedHi,
SQLSERVER 2005 keeps throwing assertation error and generating crashdumps.
I want to isolate the cause, however, the query is too long (>2kb) to fit in a crash log.
Is it possible to increase the size allocated to showing the query in the crash dump, or get the full text of that query causing the crash?
I have a virtual server (VMware ESX) with 64GB RAM running a single instance of SQL 2012 SP1. The max memory config is set to 59392 (58GB).
The Page Life Expectancy for this server has been averaging well under 10 mins for the last few days, according to our monitoring.
I have been checking the amount of data in the buffer cache periodically during the day with the below query, which seems to show that there is never more than about 10GB of data at any one time, frequently dropping below 5GB:
SELECT COUNT(*) AS BufferPages,
CONVERT(decimal(10, 2), COUNT(*) / 128.0) AS BufferMB
FROM sys.dm_os_buffer_descriptorsWhy would the amount of cached data be so low (and cause so much churn)?
I am aware that other things will require some of that memory (plan cache etc.) but with Max Mem of 58GB, I would expect there to be a much higher amount of actual cached data at any one time. I did the same checks on another VM with the same amount of RAM/Max Mem setting, and there was 50GB of data in the cache, with PLE measured in hours.
Hi,
I have a problem to import xls file to sql table, using MS SQL 2000 server.
Actual main problem associated with it is xls file contain one colum having large amount of text which length is approximate 1500 characters.
I am trying to resolve it through like save xls to csv or text file then import but it also can not copy whole text of that column, like any column in xls having 995 characters then text or csv file contain 560 characater. So, it is also wrong.
thanks in advance, if any try to resolve
Hi,
I’m attempting to use DTS to import data from a Memo field in MS Access (Jet 4.0 OLE DB Provider) into a SQL Server nvarchar(4000) field. Unfortunately, I’m getting the following error message:
Error at Source for Row number 30. Errors encountered so far in this task: 1.
Data for source column 2 (‘Html’) is too large for the specified buffer size.
I also get this error message when attempting to import the same data from Excel.
Per the MS Knowledgebase article located at http://support.microsoft.com/?kbid=281517, I changed the registry property indicated to 0. This modification did not help.
Per suggestions in other SQL Server forums, I moved the offending row from row number 30 to row number 1. This change only resulted in the same error message, but with the row number indicated as “Row number 1�. (Incidentally, the data in this field is greater than 255 characters in every row, so the cause described in the Knowledgebase article doesn’t seem to be my problem).
You might also like to know that the data in the Access table was exported into this table from a SQL Server nvarchar(4000) field.
Does anybody know what might trigger this error message other than the data being less than 255 characters in the first eight rows (as described in the KB article)?
I’ve hit a brick wall, so I’d appreciate any insight.Thanks in advance!
How do i check the size of the datacache allocated from the buffer pool by sql server?
DMV or anything to show me the pool allocation sizes for the various pools in sql server i think i may be able to work from there.
Greetings,
I want to increase the size of a transaction log file. Can I do this while the database is live? If not, what do I need to do?
Thanks!
Rob
We currently have a hard-drive size of 3.89MB and 3.3MB is being used by tempdb. I have tried shrinking the database truncateonly but this is not working. The problem is that the tempdb file is as large as my C: drive size. In addition can this be moved to another directory. For example can I move the tempdb.mdf and ldf from C: to E:. Any help would be greatly appreciated.
Thanks
I would like to increase the initial size of a SQL 2005 DB from 150 to 250 GB to prevent automatic autogrowth; would this have any impact in production if you do it on the fly?
Thanks,
Carlos
Folks:
Is there a way to decrease the initial size of a database/log file? I've noticed you can increase it, but if you decrease it, after you confirm the change and go checking again, you will see nothing happened.
Is there a way? Am I missing anything?!
I would like to increase the initial size of a SQL 2005 DB from 150 to 250 GB to prevent automatic autogrowth; would this have any impact in production if you do it on the fly?
Thanks,
Carlos
Hi
I have a master package that executes a series of sub packages run from a SQL Agent job. One of those sub packages has been stable for a week, running at least once per day, but it just failed despite having been run once already today with the same set of input data.
There were a series of errors showing in the event log for the Execute Package Task starting with "Buffer Type 15 had a size of 0 bytes.", then "The buffer manager failed to create a new buffer type.", then "The Data Flow task cannot register a buffer type. The type had 32 columns and was for execution tree 3.", then "The layout failed validation." and finally "Error 0xC0012050 while loading package file "C:[Package].dtsx". Package failed validation from the ExecutePackage task. The package cannot run.".
SQLIS.com reports the constant for the error code as DTS_E_REMOTEPACKAGEVALIDATION ( http://wiki.sqlis.com/default.aspx/SQLISWiki/0xC0012050.html ).
I then ran the package on my dev machine in BIDS and it worked fine, so I re-ran the job on the server and this time that package executed ok, but another one fell over but did not put anything in the event log.
Does any one have any idea what happened?
TIA . . . Ed
We have a small table of about 13 million rows that needs altered. A column in the table needs to be changed from a varchar(20) to a varchar(500). When we ran the alter table script, 3 hrs later and it wasn't done running. Any suggestions on what we can do to speed up the process?
Thanks ahead of time
DMW
Edit:
We are running SQL Server 2000 and the db at the time was running in simple mood
I'm new to mssql.
I need to change the size of a column of a table from char(255) to char(500). I used the line:
alter table table_name alter column column_name char(500)
When I run that command, I get a message that it was sucessful. However, when I try to enter data into the changed column, the number of characters I can enter is still 255. I check the information schema for the column and the 'character_maximum_length' field is 500.
What is the problem here? Is the maximum allowable length for char 255? How can I get a column to have 500 characters?
Dear all,
I am having a problem with the footer in my SQL Reporting Services project. I am trying to print a disclaimer in a text box on the last page in the footer. I can get the text box in the footer just fine but as the disclaimer is quite a lengthly multi line text string the footer has to be enlarged in order to fit the whole text box in.
This causes a problem on all the other pages where even though the footer is not displayed on pages before the last page it still takes up space stopping other data from being displayed where the footer would normally be.
Is there a way for me to set the footer size to a default value all all pages except the last page? I just want to enlarge the footer to about 1.5" on the last page to print my disclaimer without effecting the other pages layout.
Many thanks in advance,
Trevor Keast
I must increase column (filed) size in existing datebase but without usingEnterprise manager....(Becouse we use MSDE on our clients PCs)The Filed is part of primary and foreign key constraints....And every constraint has diferent index number in each database...for example (PK_something_9e382hjl8), and I don't know how to pick thisvalue before "drop constraint" command.....Thank you very much....
View 1 Replies View RelatedHi All,I want to shrink a transaction log using :USE MasterBACKUP Log test WITH truncate_onlyUSE testDBCC shrinkfile(test_log, 0)These commands will be executed from a workstation.After shrinking, I want to see the size of thetransaction log and database files. But, I do notknow what command should I use.Could anyone help me ?Thanks in advanceJohn S.*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies View RelatedImpact on performance of changing Text column size.
However, many of them were regarding older releases of SQL Server.
Does the architecture in 2012, 2014 releases make this less of an issue ?
In other words, why bother going from Varchar(1000) to Varchar(50) ?
I'm just thinking maybe there is column compression automatically now.
I am loading from SQL Server 2008 to Access 2010 using SSIS. One of the columns in the table I am loading into is a Number datatype and Fieldsize is long integer. The values are being truncated, so I want to change the Fieldsize to DOUBLE. Â However, when I do that I receive the error below. What should I do? I would like not to change my Windows registry.
This error can be caused by one of the following:
The maximum number of columns allowed in a table or the maximum number of locks for a single file is exceeded.
The indexed property of a field is changed from Yes (Duplicates OK) to Yes (No Duplicates) when duplicate data exists in the table.
An expression is not specified in the Expression property of a calculated field.Â
If the maximum number of locks per file was exceeded, you can increase the number by editing a registry entry. However, this is not a recommended option.
If you use Registry Editor incorrectly, you could cause serious problems that require you to reinstall the operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
Make a backup of the registry. Find the MaxLocksPerFile registry value by using the Windows Registry Editor, and then increase the value. The MaxLocksPerFile value is saved as part of the following key:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftOffice14.0Access Connectivity EngineEnginesACE
If the Indexed property of a field and duplicate data is located in the table, reset the Indexed property to the previous setting, or remove duplicate records from the table.
While I was loading to the same table a few days ago, I received a warning and the task took approx 9 hours. I am attaching the screen shot.
Good day everyone,
I'm experiencing a completely random warning from any given row count component within any given data flow task. It occurs sporadically. Whilst distracting, I don't see any adverse effects to the data after the packages complete. Can someone weigh in on this warning and let me know if it is indeed benign or what I maybe able to do to fix it?
Here's the warning:
"A call to the ProcessInput method for input 75997 on component "CNT Rows sent for STG table" (75995) unexpectedly kept a reference to the buffer it was passed. The refcount on that buffer was 4 before the call, and 5 after the call returned."
Thanks,
Langston
I have created a sample dataflow to parse the employee details (empid,empname,empaddr) from a flat file to oracle 9i database table named employee(columns : empid,empname,empaddress - All are varchar2(15)) using SLOWLY CHANGING DIMENSION transformation for insert/update on the table.
EMPID as Businees key
EMPNAME and EMPADDR as changing attributes.
Connection string is using Microsoft oledb provider for oracle.
I am getting the following oledb command error.
-----------------------------------------------------------------------------------
TITLE: Microsoft Visual Studio
------------------------------
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Warning at {CF5DCB64-279E-45A4-A9A8-FF2FBB130980} [Insert Destination [1972]]: Cannot retrieve the column code page info from the OLE DB provider. If the component supports the "DefaultCodePage" property, the code page from that property will be used. Change the value of the property if the current string code page values are incorrect. If the component does not support the property, the code page from the component's locale ID will be used.
------------------------------
ADDITIONAL INFORMATION:
Errors were encountered while generating the wizard results:
Error at Data Flow Task [OLE DB Command [1996]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command [1996]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
Error at Data Flow Task [OLE DB Command 1 [2007]]: An OLE DB error has occurred. Error code: 0x80040E51.
An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80040E51 Description: "Provider cannot derive parameter information and SetParameterInfo has not been called.".
Error at Data Flow Task [OLE DB Command 1 [2007]]: Unable to retrieve destination column descriptions from the parameters of the SQL command.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=ScdWizardGenerationErrors&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
The scenario is as follows: I have a source with many rows. Each row has a column called max_qty_value. I need to perform a calculation using another column called qty. This calculation is something similar to dividing qty/(ceiling) max_qty_value. Once I have that number I need to write an additional duplicate row for each value from the prior calculation performed. For example, 15/4 = 4. I need to write 4 rows to the same target table as in line information for a purchase order.
The multicast transform appears to only support fixed and/or predetermined outputs. How do I design this logic in SSIS to write out dynamic number of rows to a target table.
Any ideas would be greatly appreciated.
thanks
John
I am trying to resize a database initial log file from 500M to 2M. I€™m using€?
ALTER DATABASE <DBNAME> MODIFY FILE ( NAME = <DBLOGFILENAME, SIZE = 2 ) "
And I'm getting "MODIFY FILE failed. Specified size is less than current size." I tried going into the database properties and setting the log file to 2M, but it doesn€™t keep the changes.
Any help with this process?
i am using visual web developer 2005 and SQL 2005 with VB as the code behindi am using INSERT command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString1").ToString() test.InsertCommandType = SqlDataSourceCommandType.Text test.InsertCommand = "INSERT INTO try (roll,name, age, email) VALUES (@roll,@name, @age, @email) " test.InsertParameters.Add("roll", TextBox1.Text) test.InsertParameters.Add("name", TextBox2.Text) test.InsertParameters.Add("age", TextBox3.Text) test.InsertParameters.Add("email", TextBox4.Text) test.Insert() i am using UPDATE command like this Dim test As New SqlDataSource() test.ConnectionString = ConfigurationManager.ConnectionStrings("DatabaseConnectionString").ToString() test.UpdateCommandType = SqlDataSourceCommandType.Text test.UpdateCommand = "UPDATE try SET name = '" + myname + "' , age = '" + myage + "' , email = '" + myemail + "' WHERE roll 123 " test.Update()but i have to use the SELECT command like this which is completely different from INSERT and UPDATE commands Dim tblData As New Data.DataTable() Dim conn As New Data.SqlClient.SqlConnection("Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Database.mdf;Integrated Security=True;User Instance=True") Dim Command As New Data.SqlClient.SqlCommand("SELECT * FROM try WHERE age = '100' ", conn) Dim da As New Data.SqlClient.SqlDataAdapter(Command) da.Fill(tblData) conn.Close() TextBox4.Text = tblData.Rows(1).Item("name").ToString() TextBox5.Text = tblData.Rows(1).Item("age").ToString() TextBox6.Text = tblData.Rows(1).Item("email").ToString() for INSERT and UPDATE commands defining the command,commandtype and connectionstring is samebut for the SELECT command it is completely different. why ?can i define the command,commandtype and connectionstring for SELECT command similar to INSERT and UPDATE ?if its possible how to do ?please help me
View 2 Replies View Related