Hi,
SQLSERVER 2005 keeps throwing assertation error and generating crashdumps.
I want to isolate the cause, however, the query is too long (>2kb) to fit in a crash log.
Is it possible to increase the size allocated to showing the query in the crash dump, or get the full text of that query causing the crash?
I'm trying to query a table where in the data in a cell is 65KB and when i try to do a SELECT I am unable to get the entire data from the cell.
SELECT CAST(Xml_data as XML) from TableName where ID=100
Error Message: Msg 9448, Level 16, State 1, Line 1 XML parsing: line 241, character 76, well formed check: undeclared entity
Hi all,
I tried to change the size of a field of my table using the query :-
ALTER TABLE test MODIFY id varchar(50)
Initially the size of id was set to 30 .Is there any other way or any error in my query.Please help me soon.
joshymraj
I encountered the following error while attempting to preview an RDL report I was developing in VS2010 using SSDT:"The size necessary to buffer the XML content exceeded the buffer quota"
View 3 Replies View RelatedWe have a set of reports with same header section in all the reports. So while developing a new report i used to copy that header section to the new report with same dataset names (without any change) , but while rendering the report it is throwing error " The size necessary to buffer the XML content exceeded the buffer quota".
View 2 Replies View Related
hi,
I have one DB in SQL Server 2005.When I was creating it
takes 7813 MB.Now the databse size almost full.Now I want to extend the
DB Size.At my HDD has more space(near by 160 GB).But I don't know how to
extend the Size.More over I had one doubt.Am executing the
exec sp_helpdb command.It shows the Datafile maxsize is Unlimited.I want to
know when the data is full,whether it automatically takes the size from the
HDD or not.
Please Help me out to this Problem.
Hi all,
I encountered error 1105 (Can`t allocate space for object .....) while running a query.
I had dump transaction with no log sucessfully and retry running my query but
still encounter error 1105.
I had checked my database size and following are the info:
Datasize : 2500MB Database size available : 753.39
Log space : 500MB Log space available : 500MB (this was acheive after
after dump trans. twice. it was around 480MB before)
Thus looks like the data segment is full!!!
I expanded the size of the disk device D on which the segment device A is on by 50MB. When I did a sp_helpdevice D, the expansion is reflected.
Next I run sp_extendsegement, A, D.
However running sp_helpsegment A doesn`t show that segment A is expanded.
Please help!!! How do I expand the size of the segment? (without creating a new disk device, is it possible)
Any other way to resolve this problem?
Also how to check if a particular segment is full? eg. the %usage of data/log segment.
Thanks in advance.
I seem to remember that the font size and type can be controlled in SQL Server 6.5 and the process controlls the fonts displayed
throughout the program - Enterprise Manager, Query Tool, etc.
I have just re-installed 6.5 and the fonts are way too small.
Can anyone tell me how this is done?
Thanks.
Jack
I have a database that is over 45 GB and need to increase the size, can someone help me with the code to get it done?
Thanks
Dear
I am using varchar data type in my table.it provides maximum 8000 character. but i want more than that.
how to increase size more than 8000
i want to use text datatype but when i type in length it doenst type.it displays only 16.i cant change to another value.
please help me out
Waiting for reply
Regards,
ASIF
Dearfriends,
please guide me,
i've a column with varchar(100).
presently, i need that column as varchar(500).
thank you very much.
Vinod
Dear friends,
i've a column with nvarchar type. how can i increase the size of the column?
Vinod
hey
i've a db running sql server express sp2. the db size now is 1.1 gb
i've a table with a varchar column of size 20 . when i try to increase the column size to 50 i get a
timeout exception, and the the cloumn size is unchanged. this table has 2.5 million records
i use sql server management studio express to do the changes
is there a way to increase this timeout or whtever i can do to update this column size?
thx in advance
Hi,
How can I increase the transaction log size of my sql server 2005 database? i can execute the shrink and backup log which can shrink the .ldf file to 1MB. However, since my dts involves a lot of inserts and updates, the my transaction log grows to 700MB in the middle of my dts execution. How can i increase the transaction log size maximum capacity to probably 1.5GB just so it can accommodate my full dts execution?
BTW, this is my commands to shrink the log file:
DBCC SHRINKFILE(<dbname>_log, 1)
BACKUP LOG <dbname> WITH NO_LOG
DBCC SHRINKFILE(<dbname>_log, 1)
cherriesh
Hi All,
Is it possible to increase the size of data file in SQL Server 2005 Express Edition.
I think the licensed limit is 4096MB whcih i am unable to increase.
Could anyone let if is it possible to increase the data file size and if yes then how?
Thanks,
Varun
A few months ago a customer moved from SQL 2000 to SQL 2005. The db wasbacked up on SQL 2000 and restored to SQL 2005. The application using thisdata works on SQL 2005 but takes no advantage of new features. The db onSQL 2000 was about 2.9GB, now on SQL 2005, it is 16.5GB. The db is set toSimple recovery so trx log is only 2mb. The mdf file is 16.5GB, ManagementStudio shows only 5mb free space. There has not been a huge increase intransactions.One of the largest tables has only added 2,000 rows since the move to SQL2005. Yet the data and index size has jumped from about 400mb to 3.5 GB. Iused the 'BigTables.sql' script found at various SQL sites:www.databasejournal.com/img/BigTables.sqlAny ideas why such a large increase?Thanks
View 4 Replies View RelatedHi All,
Is it possible to increase the data file size in SQL Server 2005 Express edition?
If yes then how?
Thanks,
Varun
Hi thereAnybody know how to increase the MS SQL server buffer size?I get an error when trying so insert some pictures as OLE objects. Whentransfering to the server i get an error, that the buffer sizes needs tobe increased.RegardsRudi W.
View 1 Replies View RelatedI encounter one weird problem, I have a database with around 7 GB ...when I delete a bunch of data from it, it suppose to reduce thedatabase file size, but weirdly, the file size increase to 8 GB.Wondering why. Is it suppose to be like that?Is it the architecture is designed to work like that?Is there any way for me to reduce the database file size?Thanks.Peter CCH
View 2 Replies View RelatedView 2 Replies View Related
No transaction log involved, only the table itself.
Use sp_spaceused "table_name" to check the space used.
It seems the table size actually increased from the beginning to the middle of deletion, at the end of deletion, its size decreased.
Recovery mode set to be simple, autoshrink turned on.
The tables tested are about 50MB ~ several GB in size, all have the same behavior. The size increased about 5%~10%.
Since the deletion is called from another software, I want to know if it is possible for SQL Server to have this behavior or it is absolutely the 3rd party software's issue
Thanks!
Hi
I've been searching this site and the Web for info on an error message I get when importing from Access 2003 into SQL Server 2000.
'Data for Source Column 3('Col3') is too large for the specified buffer size'
A memo field in Access is larger than 255.
I have followed advice about putting the field to the first column. This doesn't work - the error just returns the new column number. In fact, I've tried just importing the first column - no good.
I am wary about making Registry changes as comments on the Web say this doesn't work either.
Does anybody have the solution for this.
Paul
Error: "The specified buffer size is not valid. [buffer size specified = 0]
Hello, im very new to SQL 2005 everywhere but looked like it could do the job for what i needed:
Im working on a c# (.net 2.0) project and loaded data
(one column from one table, 800 rows, text, no greater than 80characters in length)
from an access db into a data set, then lnserted the data in SQLce, great it works fab!
but as soon as I select another field(text, <=10) from the access db, and try to insert it into sql i get the error...
what have i missed???
hi,There is facility to do backup of the database. I can use thatfacility to backup the database. But before i do a backup i want tocheck if the disk space available enough to backup that database. Ihave a 22gb database mdf file, when i took a backup of that its only3gb. SO i cannot use the size of mdf file to determine the databasedump file. Is there any facility available to find out the backupdatabase dump size before doing the backup?ThanksNabhonil.
View 1 Replies View RelatedI need to increase the file size for a mirrored database. I am new to using mirroring for replication. Will increasing the file size break the mirror?
View 2 Replies View RelatedI save Table size and recs. no every day. and check it some days.
...
insert into @t
exec sp_msforeachtable 'exec sp_spaceused ''?'''
...
But Today I saw sudden increase size in a table. about 128 MB in a day. (Average Growth fro this table was 4 or 5 MB in a day)This growth was for Only 4222 Records. While for more number of records (about 7000) in yesterday we had only 2 MB GRowth!
This Table information (Now):
sp_spaceused 'Table1'
Result:
name ---Rows --reserved --data
Table1--1021319--460328 KB --283104 KBI Try to gess The reason. I copy These new records to another table.But The result was more strange : on new table the size of these record was : < 1 MB I copied All records to another table . The size was : 148 MB (while this is 283 MB in my real database)
Where we have increase the size of the calculated column in cube..whether in attribute or some where else...
View 4 Replies View RelatedHow to increase the chart report size to avoid the mismatch of output data like below....
View 2 Replies View RelatedIs it possible to change the command buffer size??
I need to export data on demand to an excel spreadsheet via a stored procedure. The only way I know how to do this is through a bulk copy command; but my query is much to big for the buffer....
Thanks!!!
Hi,
I'd like to replicate an SQL Server Database to an SDF file. For Simplicity I want to use the SQL Server 2005 Management Console. The Console reports that the maximum buffer size were to small. In the comment (c# code) I can see it is set to 512. How can I increase the value in the replication assistant?
Miroslaw
Need to confirm if we can add space(increase data file size) for the database which is configured for always on similar to that of mirroring or we need to follow any different procedure.
I have a requirement wherein the datafiles on both the primary and secondary replica got full, if i add space to the primary database will it automatically get added to the secondary replica or not?
Hi,
I have a report on my report server... and it has set for multivalue parameter... but since the particular client has only one plan so they wont have the select all function... but the size of the ddl is so squished that we cannot see the Plan name at all...
So can someone pls help me as to how can i increase it..
Regards
Karen
Hi all
I am Importing data from CSV to Table using DTS package it showing error "exceeded Buffer size",
What is Buffer size of varchar in SQL Server2000
Appreciated your help