Here's my code: Dim Cmd as New SQLCommand(sqlString, conn) cmd.CommandType=CommandType.StoredProcedure Breaks Here ----->>cmd.parameters.add(New SQLParameter(@OrdAlias, OrdNum)) cmd.parameters.add(New SQLParameter(@AliasSourceCode, 4))The error says:compilation error - - then, on the line that is in red:Compiler Error Message: BC30037: Character is not valid.I have 'OrdNum' declared globally, and OrdNum is assigned right away in the Page_Load event. I've checked the spelling of the SQL parameters (OrdAlias is a varchar, and AliasSourceCode is a tinyInt)After all this - then, this code runsAny ideas why I'm getting this error??
I do not know what I did wrong. I tested a simple function in my custom code and get the error saying "Character is not valid". Any help is appreciated!
Here is the function inside my custom code.
Shared Function test() As string
Dim items As Fields Return items("DataField1").Value;
End Function
I call the function in the body of my report using: Code.test()
and the error says "There is an error on line 18 of custom code: [BC30037] Character is not valid."
I have been having a problem trying to connect to a SQL Server. I have installed the Developer edition on an MS Small Business edition 2003 server I also installed MS Sql Manager and I was able to create a database and connect to it. The database server is in the same PC. I used the surface configuration to enable remote connections using TCP /IP and pipe lines. My application runs without a problem on my development machine but when I deployed on this server I get the provider: SQL Network Interfaces, error: 25 - Connection string is not valid Error. this is my config file setup <connectionStrings> <add name="Diamond_dbConnectionString" connectionString="Data Source=192.168.1.104MSSQLSERVER;Initial Catalog=Diamond_db;Integrated Security=True" providerName="System.Data.SqlClient" /> </connectionStrings> I have google and yahoo this error I found a lot of information I've tried many of them but still having the problem. I will appreciate your help solving this problem. I have a customer waiting since last week to see this site and I'm still stuck. Tia Charles PS. Below I pasted the complete error info I get. An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734995 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188 System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +359 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107 DiamondTableAdapters.COUNTRIES_TEMPLATETableAdapter.GetContriesTemplate() +108
I have installed SQL Server 2005 Developer edition. When I open SQL Server Management Studio, and try to connect to the database engine, I enter these credentials:Server name: LT2000MSSQLSERVERLogin: saPassword: my passwordWhen I try to connect I receive the following error:An error has occured while trying to establish a connection to the server. When connecting to SQL server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.(provider: sql network interfaces, error:25 - connection string is not valid)(Microsoft SQL Server, Error:87)What can I do?
I want to set a Report Parameter on a field. The Report Parameter is called 'filter'. In the statement I put the Report Parameter in the WHERE-part: WHERE ([DatabaseName$TableName].[FieldName] = @filter). After this I set the 'Available values' on the Report Parameter in the lay-out to Non-queried. When the report is running, no problems.
But.....
Now I want to set 'Available values' on 'From Query' and refer to the data set, so the user can choose on which value he want to filter. But now, after running the preview the following error displays: Error 1 [rsInvalidReportParameterDependency] The report parameter €˜filter€™ has a DefaultValue or a ValidValue that depends on the report parameter €œfilter€?. Forward dependencies are not valid.
Why can't I set the Report Parameter to 'From Query'? Anyone any suggestions???
(you can see the rest of my statement here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1098540&SiteID=1)
I have a backup of DB with version Microsoft sql 2012 and i need restore this data base on instance Microsoft sql 2008 R2 when i try restore database on SQL server 2008 R2  i have the error:
hi all, i'm trying to insert the time/date a button was clicked on a gridview and it generates an error:the string was not recognized as a valid DateTime.There is an unknown word starting at index 0 i have changed the culture to en-US but it still doesn't work. i actually created the date/time column after some data had been entered into the table so the column allows nulls. this is my code:InsertCommand="INSERT INTO test101(Surname,Names,Registration,Login Time)VALUES (@Surname, @Names, @Registration,@Login_Time)"<Insert Parameters><asp:Parameter DefaultValue= DateTime.Now Type=DateTime Name="Login_Time" /></Insert Parameters>any suggestions?
Hi all, I have a problem is that I cannot perform the transacional replication from one server (ms-sql2k) to other server (mssqlserver).
The error show below : Log Reader Agent - Is not a valid win32 application.
I try to setup another server (mssql2k) to do the same thing, there is no error appeared. Therefore, I have doubt that the name of the computer using "-" will have problem. Or the registry of (ms-sql2k) may have problem because it had wrongly installed personal edition and re-installed the standard verions afterwards.
Dear All,(No aswers on access newsgroups)Access2000.adp connected to SQL-server 2000MainForm unbound: seachform on companies meeting a complex combination ofcriteria.SubFrom and ListBox to display the searchresult ( 2 outputs to test what'sbest).Searchresult is stored in a creatable ADO-recordset (see code) and then1. Converted to string (GetString) to be set as valuelist for a listbox.2. bound to the subform.The Listbox shows the resultdata correctly but is limited in length.The subform shows the records but all fields are empty or displays #errorHow should I bound the controls correctly to display the fieldvalues?If I let them unbound the show up empty.If I set them to the recordsets' fieldnames it show #error.On my Notebook using MSDE there is no errormessageOn my Desktop i get error 7965 not a valid recordset property.CAN'T FIND WHAT'S WRONG! Cursortype ??FilipCODE'Store result in creatable ADO-recordset: Add fieldsWith ResultRSWith .Fields.Append "CompID", adInteger.Append "CompName", adVarChar, 255.Append "BasicPrice", adVarChar, 255End With.CursorLocation = adUseClient.CursorType = adOpenStatic.OpenEnd With[color=blue][color=green]>> Code for Search[/color][/color]'Set Rowsource Listbox and subformIf ResultRS.RecordCount > 0 ThenstrSearchResult = ResultRS.GetString(adClipString, , ";", ";")Me.Formulier1.Form.Visible = TrueSet Me.Formulier1.Form.Recordset = ResultRSMe.CmbSearchResult.Visible = TrueMe.CmbSearchResult.RowSource = strSearchResultEnd IfSearchEnd:'Clear memoryIf rs.State = adStateOpen Thenrs.CloseSet rs = NothingEnd IfIf ResultRS.State = adStateOpen ThenResultRS.CloseSet ResultRS = NothingEnd If
I have downloaded the msi file for the SQL Server Management Studio Express. However, clicking the msi file, showed a Windows Installer error msg that the installer package can not be opened because it is not a valid installer pckage.
Previously, I did download and install the SQL Server 2005 Express successfully. We need Management Studio Express in order to run the 'Enterprise manager'. Am I right?
I have a datagrid script where I modify data in an sql dbase in asp.net, when i hit the "update" button, I get a Specified cast is not valid error on my 'descript' declaration, whereas 'descript' is a multiline text box and a varchar datatype (everything else is either a char or a datetime datatype). Am I assigning 'descript' a wrong datatype? Tried making it a nvarchar, still get same result'''''''''''''''''''''''''''''''Sub MyDataGrid_UpdateCommand(s As Object, e As DataGridCommandEventArgs ) Dim conn As SQLConnection Dim MyCommand As SQLCommand Dim strConn as string = "Server=sql.mydomain.com;Initial Catalog=mydb;User ID=DBxxx;Password=xxxxx;" Dim company As textbox = E.Item.cells(2).Controls(0) Dim address As textbox = E.Item.cells(3).Controls(0) Dim city As textbox = E.Item.Cells(4).Controls(0) Dim state As textbox = E.Item.cells(5).Controls(0) Dim county As textbox = E.Item.cells(6).Controls(0) Dim zip As textbox = E.Item.cells(7).Controls(0) Dim phone As textbox = E.Item.cells(8).Controls(0)'''''' the following line declaring the descript var is the line of the error Dim descript As textbox = E.Item.cells(9).Controls(0) Dim web As textbox = E.Item.cells(10).Controls(0) Dim email As textbox = E.Item.cells(11).Controls(0) Dim datesold As textbox = E.Item.cells(12).Controls(0) Dim dateexpire As textbox = E.Item.cells(13).Controls(0) Dim strUpdateStmt As String strUpdateStmt =" UPDATE CPAs SET" & _ " company = @company, address = @address, city = @city, state = @state, " & _ "county = @county, zip = @zip, phone = @phone, descript =@ descript, " & _ "web = @web, email = @email, datesold = @datesold, dateexpire = @dateexpire" & _ " WHERE cpaID = @cpaID" conn = New SqlConnection(strConn) MyCommand = New SqlCommand(strUpdateStmt, conn) MyCommand.Parameters.Add(New SqlParameter("@company", company.text)) MyCommand.Parameters.Add(New SqlParameter("@address", address.text)) MyCommand.Parameters.Add(New SqlParameter("@city", city.text)) MyCommand.Parameters.Add(New SqlParameter("@state", state.text)) MyCommand.Parameters.Add(New SqlParameter("@county", county.text)) MyCommand.Parameters.Add(New SqlParameter("@zip", zip.text)) MyCommand.Parameters.Add(New SqlParameter("@phone", phone.text)) MyCommand.Parameters.Add(New SqlParameter("@descript", descript.text)) MyCommand.Parameters.Add(New SqlParameter("@web", web.text)) MyCommand.Parameters.Add(New SqlParameter("@email", email.text)) MyCommand.Parameters.Add(New SqlParameter("@datesold", datesold.text)) '', dateexpire =@dateexpire MyCommand.Parameters.Add(New SqlParameter("@dateexpire", dateexpire.text)) MyCommand.Parameters.Add(New SqlParameter("@cpaID", e.Item.Cells(1).Text )) conn.Open() MyCommand.ExecuteNonQuery() MyDataGrid.EditItemIndex = -1 conn.close BindDataEnd Sub'''''''''''''''''''''''''''''netsports
I have a stored procedure that works when executed in query analyzer. (It is also way too long to post here) When called from my application ado.net returns the error:
Invalid object name #idTable
If I run the proc in query analyzer using the same parameters (copied from quickwatch while debugging) there is no error.
While very complicated, this procedure runs quickly so timing out is not an issue.
Does anyone know why a proc would run in query analyzer and not in an asp.net/c# application?
I have created a very simple report that works correctly when in Report Designer Preview mode. When I deploy to the report server it reports that deployment was successful. When I log into Report Manager the report is visible, but when I click on it I end up at an error page.
The error that I get is: Operation is not valid due to the current state of the object.
I have subscriptions that fail because someone's email is no longer valid, where is this error information stored so I can fix the problem? I have a large list and it is hard to do manually. I will be using data driven solutions, but these are existing subscriptions that need to be ran.
i have migrated a DTS package wherein it consists of SQL task.
this has been migrated succesfully. but when i execute the package, i am getting the error with Excute SQL task which consists of Store Procedure excution.
But the SP can executed in the client server. can any body help in this regard.
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug: --- Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65 [Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type. ---
Error from page execution: --- Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip") Line 78: Line 79: cmd.ExecuteNonQuery() ---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Hi All, can someone help me, i've created a stored procedure to make a report by calling it from a website. I get the message error "241: Syntax error converting datetime from character string" all the time, i tryed some converting things but nothig works, probably it is me that isn't working but i hope someone can help me. The code i use is:
CREATE proc CP_Cashbox @mID varchar,@startdate datetime,@enddate datetime as set dateformat dmy go declare @startdate as varchar declare @enddate as varchar
--print "query aan het uitvoeren"
select sum(moneyout) / sum(moneyin)*100 as cashbox from dbo.total where machineID = '@mID' and njdate between '@startdate' and '@enddate' GO
hi i am working with Asp.net2.0,Sqlserver2000. i uploaded my developed application to the webserver. all webpages are opening..bt when i try to interact with database it is raising error as following..
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
i set Enamble to namedPipes,Tcp/IP i set Remote connection to enable
my web.config looks like this.. <?xml version="1.0"?> <configuration> <appSettings> <add key="cn" value="User ID=redot;Password=redot;Data Source=216.185.43.148:1423;Initial Catalog=redot" /> <!--<remove key="LocalSqlServer"/> ;ProviderName=System.Data.SqlClient-->
<sessionState mode="InProc" stateConnectionString="tcpip=127.0.0.1:42424" sqlConnectionString="data source=216.185.43.148:1423;User ID=redot;Password=redot;Trusted_Connection=True" cookieless="false" timeout="60" /> <compilation debug="true" /> <!-- The <authentication> section enables configuration of the security authentication mode used by ASP.NET to identify an incoming user. -->
I've got a report model I am trying to move from a development server to a production server. I published it to my development RS, exported the SMDL file, then uploaded it to the production server. At that point, I tried assigning the data source to the model and got the error:
I come before you seeking assistance on a package that basically flows very much like the "Table Driven foreach Loops" example provided by Kirk Haselden at http://sqljunkies.com/WebLog/knight_reign/archive/2005/03/25/9588.aspx
I am presently encountering the following exception:
Error: 0x3 at Shred the contents of the variable: Variable "User::FullResultSet" does not contain a valid data object
Warning: 0x80019002 at Shred the contents of the variable: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
Warning: 0x80019002 at DW CUST_CNCL_ORDhardcodedate: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
The development environment & the SQL Box are two different boxes.
I am trying to create a simple application where I want to synchronize data between Pocket PC application's ( Emulator) local database(SQL Mobile) to SQL 2005 Database. I have tried the steps outlined in the following link
Once I have completed all the steps as per the steps in the above link, I have copied the .sdf file to an another machine where I have the development environment. I have created a device application in VS 2005 and created a datasource poiting to the file (.sdf) copied locally.
Then I have added the following code string filename = @"e:VelsunMobileTest.sdf";
if (VelsunMobileTestDataSetUtil.DesignerUtil.IsRunTime()) { // TODO: Delete this line of code to remove the default AutoFill for 'velsunMobileTestDataSet.Customers'. this.customersTableAdapter.Fill(this.velsunMobileTestDataSet.Customers); }
}
private void DeleteDB() { if (System.IO.File.Exists(filename)) { System.IO.File.Delete(filename); } }
private void Sync() { SqlCeReplication repl = new SqlCeReplication();
I received an alert from one of my two secondary servers (all servers are running 2012 SP1):
File 'E:SQLMS SQL ServerMSSQL11.MSSQLSERVERMSSQLDATAMyDatabaseName_DateTime.tuf' is not a valid undo file for database 'MyDatabaseName (database ID 8). Verify the file path, and specify the correct file.
The detail in the job step shows this additional information:
*** Error: Could not apply log backup file 'MyDatabaseName_DateTime.trn' to secondary database 'MyDatabaseName'.(Microsoft.SqlServer.Management.LogShipping) ***
*** Error: Table error: Page (0:0). Test (m_headerVersion == HEADER_7_0) failed. Values are 0 and 1.
Table error: Page (0:0). Test ((m_type >= DATA_PAGE && m_type <= UNDOFILE_HEADER_PAGE) || (m_type == UNKNOWN_PAGE && level == BASIC_HEADER)) failed. Values are 0 and 0.
Table error: Page (0:0). Test (m_freeData >= PageHeaderOverhead () && m_freeData <= (UINT)PAGESIZE - m_slotCnt * sizeof (Slot)) failed. Values are 0 and 8192. Starting a few minutes later, the Agent Job named LSRestore_MyServerName_MyDatabaseName fails every time it runs. The generated log backup, copy, and restore jobs run every 15 minutes.
I fixed the immediate problem by running a copy-only full backup on the primary, deleting the database on the secondary and restoring the new backup on the secondary with NORECOVERY. The restore job now succeeds and all seems fine. The secondaries only exists for DR purposes - no one runs reports against them or uses them at all. I had a similar problem last weekend on a different database that is also replicated between the same servers. I've been here for over a year, and these are the first instances of this problem that I've seen. However, I've now seen it twice in a week on the same server.
I then try to run the same app from the client computer, it gives me:
Login failed for user 'LAPTOPGuest'.
After looking up the web for solution, I found that I can test the connection from the HOST computer in this way:
C:Documents and Settingskit>sqlcmd -E -S laptopsqlexpress 1> 2>
The test is successful
Now I run the same command on the CLIENT computer
C:Documents and SettingsKit>sqlcmd -E -S laptopsqlexpress Msg 18456, Level 14, State 1, Server LAPTOPSQLEXPRESS, Line 1 Login failed for user 'LAPTOPGuest'.
Now I can sure that from the client computer it cannot make a connection to it, then I look at the errorLog from my host computer
2006-08-13 21:41:00.34 Logon Error: 18456, Severity: 14, State: 11. 2006-08-13 21:41:00.34 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5] 2006-08-13 21:45:10.64 Logon Error: 18456, Severity: 14, State: 11. 2006-08-13 21:45:10.64 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5] 2006-08-13 21:48:41.80 Logon Error: 18456, Severity: 14, State: 11. 2006-08-13 21:48:41.80 Logon Login failed for user 'LAPTOPGuest'. [CLIENT: 192.168.0.5]
Now I know it is actually Error: 18456, Severity: 14, State: 11.
From this site : http://blogs.msdn.com/sql_protocols/archive/2006/02/21/536201.aspx
11 and 12
Valid login but server access failure
It tells the connection string and SQL Express seem to be set up properly but the server access failed the remote connection
I have previously had SQL Server 2000 installed. I uninstalled SQL 2000 before I install SQL express but somehow the SQL Server Service Manager is still running at startup, and C:Program FilesMicrosoft SQL Server80 and its files are still exist after uninstallation..... Could this be a problem?
The Knowledge base suggestion on "enabling remote connection" is very simple and I do not understand why it is so difficult to me just to make a remote connection test work..... please, I need your help.
Recently, one of my clients began receiving this error. My team gave them sysadmin permissions, but this is terrible practice. I have read into disablying simple file sharing, but I don't even think I have the option to do it. I look in mycomputer > tools > view and don't see any option for this. Besides, the problem just started occuring recently, within the last week. The server is a cluster with veritas clustering and the edition is sql server 2000. Has anybody ever had a problem like this and have a good fix? Thanks for any help in advance... -Kyle
I've successfully installed SQL Server 2005 Standard Edition on an Enterprise edition of Windows Server 2003 x64. I'm now (and also tried & failed during the install of the database engine) attempting to install the "Management Tools" component on the same server. However, in all my attempts to do so, I receive the following error:
---
The feature(s) specified are not valid for this edition of SQL Server
---
The message box does not list the features that are not valid but since the only item I've selected to install is the "Management Tools" option under "Client Components" it obviously points to something with that.
Am I missing something or are the Management Tools not supported in my config - most notably SQL Server 2005 Standard edition running on Windows Server 2003 x64?
I was trying to get my data from olb table to excel. but i got this error my dataflow is as follows: oledb source-> excel destination
i have got a excel file template at the destination all ready. with the column names+ the sheet all ready. but somehow it got stuck... anybody can help? thanks!
I am trying to create a column chart that calculates the percentage of computers in our IT environment that are Actively communicating to our SCCM Server.
I have two datasets:
1. Total_Count_Of_AD_PC DataSet.
2. PC_With_Active_SCCM_Clients dataset.
Basically i wan to calculate the percentage for each Region (i.e. AP for Asia Pacific, EMEA, Americas).
Below is the Total_Count_Of_AD_PC  Dataset screenshot.
Below is the PC_With_Active_SCCM_Clients dataset.
Below is the expression that i used that is causing the error.
The Y expression for the chart ‘Chart2’ has a scope parameter that is not valid for an aggregate function. The scope parameter must be set to a string constant that is equal to either the name of a containing group, the name of a containing data region, or the name of a dataset.
hi all, i'm retreiving user input using textboxes and saving to a gridview. i'm getting this error and i dont know whats causing it. <asp:SqlDataSource ID="SqlDataSource1" runat="server" InsertCommand="INSERT INTO test101(Surname,Names,Regno)VALUES (@Surname, @Names, @Regno)"ConnectionString="<%$ ConnectionStrings:engineeringConnectionString %>" ProviderName=System.Data.SqlClient ConflictDetection="CompareAllValues" >
