We are accessing SSRS reports using web service. We call the Render the reports using http://<server>/ReportServer/Pages/ReportViewer.aspx?reportName&rs:Command=Render
All reports render fine. However for one particular report when we click the print button on the report viewer in IE, Active-x pops up a message "Printing Now" and hangs eternally.
The error occurs even when I am logged in with Admin privileges to the machine and Active-X client works fine for other reports except this one.
Work-around tried: If I call the same report from Report Manager it works fine. Even on the server I have been able to print the report fine.
The report is just 1 page and the data loaded is also not very heavy. Any idea why client side report printing hangs?
We have never been able to get the printing to work on any of our reports using SQL Server Reporting Services 2005 SP2 in our production environment. Without this feature of printing a report, we cannot go live with SSRS at all.
We have tried adding the SP2 after a clean install on a new server -- yet we still have this problem.
I read a few some posts about uninstall the old ActiveX control used for printing, so I did this and installed the new one but that didn't help either.
We can print to files without issue - only when we try to print to a real printer does it hang forever.
It doesn't matter how big the report is, 100 pages or 1/4 of a page, same problem.
We do the following:
1) Run the report 2) Click the print button 3) Select a printer and press ok 4) "Printing Now..." dialog box appears 5) "Print Error" dialog appears and never goes away - and nothing is printed out. Have to close IE and crash the report session to get out of it.
This is the result on every client computer we have ever used in trying to access the report server.
It also hangs in running a Print Preview for all reports.
We are printing to network printers from IE6 and IE7.
Since this is on a server, we do not have a local printer to this server computer to try to print to. Even if it worked on a local printer, this is supposed to be an enterprise solution. Almost all of our employees print to network printers.
I am logged into my machine as a domain admin. I have no printing problems in any program printing to any printer, except when using Reporting Services.
We are trying to print from an ASP web application which runs the reports in an iframe using URL access.
We are able to print the same reports on all of our development environments using the same ASP web application and RDL.
Running SQL Server 2005 on Windows Server 2003 Box.
When I run a report using SQL Server Reporting Services from the \server eports page, it previews fine. However on multiple pc's when you click the print button, the print dialog comes up allows you to select a printer and when you click ok a printing dialog flashes and it reboots the client pc. The report never prints.
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Product: Microsoft SQL Server 2005 -- Error 29515. SQL Server Setup could not connect to the database service for server configuration. The error was: [Microsoft][SQL Native Client]Encryption not supported on the client. Refer to server error logs and setup logs for more information. For details on how to view setup logs, see "How to View Setup Log Files" in SQL Server Books Online.
On Windows XP systems I get the following issue when trying to browse the MSDB folder in SSIS
Client unable to establish connection Encryption not supported on SQL Server. (Microsoft SQL Native Client)
I have noticed another post where several others have noticed the same issue. It appears to only occur on Windows XP installations. Is there a workaround or fix for this?
I have SQL2000 installed as the default instance, and now I'm trying to install SQL 2005 standard edition as a named instance.
I receive this error : SQL Server could not connect to database service for server configuration.. [SQL Native client] Encryption not supported on the client. However I'm able to install client tools
The setup works fine on other box with the same config : SQL 2000/Windows XP, is there any work around for this issue ?
In my SQL 2000 client network utilty "Force proctocol encryption " is desabled and did not find the setting for SQL 2005 !
Hello,Is it necessary to upgrade the Client Connectivity Tools on all clientmachines after the SQL Server database server is upgraded from Version7.0 to 2000?Thank you in advance!Eddy
I have tried this on several different operating systems (VISTA and XP ) and several versions of SQL NATIVE CLIENT including 2005.90.3042.0
I have a 64 bit "SQL NATIVE CLIENT" connection that fails. The exact same connection and code succeeds on 32 bit. My customer and I prepend "oledb:" to the connection string and it starts working.
FAILS on 64 bit: Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
WORKS oledb:Provider=SQLNCLI.1;Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Wrigley_Test;Data Source=MONGO;Use Procedure for Prepare=1;Auto Translate=True;Packet Size=4096;Workstation ID=RIPTIDE;Use Encryption for Data=False;Tag with column collation when possible=False;MARS Connection=False;DataTypeCompatibility=0;Trust Server Certificate=False
I debugged my code to the point that I know it is happening when I call CreateAccessor for my SQL statement.
I am developing an applicaiton through which, i want to print from pocket pc emulator 2003. I am using PrinterCE.NETCF SDK to do this task. I am able to print from my applicaiton like we do in ASP (Printing one line at a time). In PrinterCE, there is an option of printing the output to a file. But, I am not able to find how we do it.
So, I want to know how we can print the output through PrinterCe into a file. Can anybody help me??
Hey all, I'm new to SQL and am having some troubles w/ a problem I was given. I have two tables (OrderTableA & OrderTableB) which are linked by an OrderID. What I need to do is have the two tables printed out to two txt files. Below is the code I have so far.
SELECT OrderID, "#" + OrderDate AS OrderDate, "&" + CustomerID AS CustomerID, Total FROM OrderTableA;
SELECT OrderID, Quantity, Discount, UnitPrice FROM OrderTableB;
The txt file for OrderTableA has to look like this: !!OrderID OrderDate CustomerID Total ---------- ----------- ----------- ------ 123456 #123456 &123456 123456
with the !! before OrderID in the header, the # before OrderID in the table and the & before the CustomerID in the table.
I'm not sure my code above is correct so far, and I've no idea how to print this to two txt files.
Any help would be greatly appreciated!! Thank you!
I have a report with two columns. It works fine in SQL Reporting Services, but when I push it to the Report Server it only prints one column instead of the two that it's set up to print.
Hi i'm having a problem in printing a reporting services report. Between each page it's giving me a white paper. What can i do in order not to get the white papers anymore? Any help?
I have a script or SP that takes a very long time to performmultiple tasks, and after each one there is a PRINT statementthat shows the time and what was just accomplished, to help memonitor what's happening and estimate how long it will take.In a script, I can put a GO after each PRINT to cause the outputto appear immediately, but that's not possible inside an SP.Instead, it seems the output goes to a buffer, and the bufferis only output when a PRINT causes the buffer to become full.Sometimes there is a long delay before the buffer fills. Isthere a way other than GO to cause immediate printing? (Iguess I could just use longer messages, and fill up thebuffer with every one, but that's not very elegant.)Thanks,Jim GCountrywide Home Loans
Hi! I recently begin to use reporting tools of SLQ 2005 instead of AR or CR. I found the DUI very easy to use and I'm partially sastify beause when I try to print my report, the printer always blow out a second white page. For one page report I can live with that but for 156 page report it's becoming a lot annoing. Is there somebody who experience the same problem? And by the way resolve it?
Here the dexcription of the report:
Is a list grouped by clientId with a sub report getting the clientId from the parent one as the parameter. Event with the insert page break after list true or false the result is the same while printing.
I have created a blank report in VS 2005. I set the pagesize to 21cm x 29,7cm (A4) and margins to 1cm. Body size is 19cm x 27,7cm. I set the body border to 1pt. When I print this blank report I won't get printed as I expcted. The printed margins are very different from the margins which I set. Hos can I solve this problem?
We are displaying the reports in Web Application using Report Viewer control.When we run the report and want to take printout we are clicking on Print button of Report Viewer then it is giving error "Unable to Load Print control" Install some activex control.
With out this error how can we print the report. How to overcome this waring.
We have created reports with page size width : 11in and height : 8.5in so that we get pages printed in the landscape mode. We use HP LaserJet 3500 and reports were printing correctly in landscape format. Everything was working fine till we introduced a new printer Dell 1110 laser printer to the environment.
When we have our Dell 1110 laser printers set as default, the page setup IS NOT set to landscape and when I manually change it to landscape, it prints in a compressed portrait image rather than landscape.
However when the HP LaserJet 3500 is set as the default, it prints correctly in landscape.
As the client is using Dell 1110 laser printers i need to fix this issue immediately. Can someone guide me in resolving this issue..
Is there a way to save print settings with the report so that settings such as the size of paper (A4, legal...) and layout (landscape, portrait) do not have to be specified by user everytime she wishes to print the report?
For some odd reason the footer of my report never gets printed. The footer contains the page number and report name and is very important to my report. I made sure the margins are 1 inches for all sides, made sure Footers printing in first and last pages are checked in the properties section, and gave it a large amount of space around the textbox. Is there anything I am doing wrong? Also, the header and body prints correctly.
i have used report viewer control in my win app, (c#, .net 2.0) and from msql i get data, fill necessary tableadapters and print report. Everything works fine on my computer, i generate report from template, push Print button in report viewer, Print dialog appears and i print the report by clicking OK.
The problem occurs in another computer, where i launch my app, i generate report, push Print button, and when appears print dialog happen strange things:
1. In print dialog i push "Print" button once, and nothing happens, Print dialog is still on top, then i push second time Print and then i can see that to pages is sended to printer (but my report is only one page). Printer does nothing, in printer schedulles there is no jobs.
2. So i press Print button in report viewer second time, Print dialog appears again, i click Print button nothing happens, then i push second time Print button i can see that 1 page is sended to printer, Print dialog disapear and now printer print my report correctly.
and this mesh is everytime i generate report and want to print it. Printer is installed correctly, i tried newest drivers for it. For example with ms office word everything works fine.
Could it be report viewer bug? what are the ways to find out what is wrong?
Hi all, I have a web interface and using that web Interface I am viewing the report in Report Viewer.
I have tried to print that report using the Print button on the Report Viewer. If its a large report, say around 100 pages, then the report takes a lot of time to print. It keeps on showing the "Printing Now..." dialogue box on the web interface for a long time. When I checked the printer status, it keeps on showing "spooling". Because of this, the printer takes around 12-13 minutes to spool and then print.
My system configuration is 2.0 GHz processor and 1 GB Ram. Also, the report is fairly simple.
Please tell me why this could be happening. What could be wrong.
I select Agfa Rotis Sans Serif and the report change the text with that font. I can see that in my navigator.
If i print the report with ie (File/print) the report is print ok.
If i print the report using the reporting services print button the report is not print with that font.
The font is install in the server and in the client.
That ocurrs only in some machines and i don't know why.
At first, that font was not installed in the server and occurs the same. In some machines the print were ok and in some machines don't.
I don't understand anything. If the problem is in the server configuration i don't understand why there are machines that print correctly the font and if the problem is in the client neither cause all machines have that font installed and in some machines is print ok and in other not.
I posted a message about this yesterday but I have more info..
I have a server (SQL 7.0, sp2) that anywhere I connect to it through EM the EM hangs. I can drill down into the server and even get into the Security drop down but if I hit Databases to drill down or Management etc. It hangs.
I did profiler on this and another server. When I click the + by the Database folder I hang and get "TSQL:Batch Starting: exec sp_MSdbuseraccess N'db', N'%'" but never get a "TSQL:BatchCompleted" for that statement. (Where other working servers I do get the set of both start and completed)
Drilling into the Security tab runs the query: exec sp_MSDBUserpriv... etc.) and this one works..
Anyone have any info on: exec sp_MSdbuseraccess N'db', N'%'
I can't find anything in BOL, Microsoft KB, Technet etc.. Please Help as there are certain things I can't do without EM... THANKS!!!
All -- Please help. I am having trouble printing a database diagram. When I do, I get junk artifacts on the page on each table, shaded areas that obscure part of the picture. I get these results when I print with Adobe Acrobat 8 Standard and when I print to my HP4200N laser printer. Is there a required driver or something? Please advise. (I apologize but this is the only good place I could find for this post-- if you have any hints for other locations then please post links.) Thank you. -- Mark Kamoski
