My application saves customer email addresses in two different fields in ym table
How do i combine two fields from the same table in a select statement?
I've tried the following:
Select EmailAddy + ', ' + FriendsEmail AS Expr1
FROM dbo.Contacts
But all I get are the results from one field.
Hello there
I have an application that allows users to book rooms in a building. I have a booking request table and a rooms booked table since there is a booking that can be made that includes multiple rooms. I have an instance where i need to select the booking requests for a particular date and need to display the rooms for each booking. Since the rooms booked table has the booking request id i'm wondering if there is a way to combine all the subquery results into one record to get around the error of having multiple records being returned in a sub query. The table structures are as follow:
bookingrequestion - bookingrequestid, startdate, enddate
roomsbooked-id, bookingrequestid, roomname
i'm basically trying to use the following query
select br.bookingrequestid, (select roomname from roomsbooked where id = br.bookingrequest) as rooms
i'd like the results of the subquery to return the room names as A,B,C. I'm trying to avoid having to obtain the recordset for the booking requests and then loop through them and for each one obtain a recordset for the rooms, seems like too many database hits to me.
thanks
Hi,
These aren't my tables, but lets dumb it down for my sake!
I have 2 tables:
CompanyInfo: IDNumber, EffectiveDate, CompanyName
TransacationInfo: TransactID, CompanyID, TransDate, Amount
There are several records in TransactionInfo for each record in CompanyInfo.
I want to:
SELECT CompanyInfo.IDNumber, CompanyInfo.EffectiveDate, CompanyInfo.CompanyName,
SUM(TransactionInfo.Amount)
How can I do this? Can I?
Hi all,
I need some help in combining two results. I am using the Northwind Database and the Orders Table. The first select outputs the table shown below, Table 1 and the second select outputs the result in the second table Table 2. How can I combine these two to get the third table, Table 3 ?
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia1
FROM dbo.Orders
WHERE (ShipVia = 1)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 1 Results
EmployeeID CountShipVia1
1
82
2
71
3
81
4
116
5
29
6
48
7
44
8
75
9
29
SELECT TOP 100 PERCENT EmployeeID, COUNT(ShipVia) AS CountShipVia2
FROM dbo.Orders
WHERE (ShipVia = 2)
GROUP BY EmployeeID
ORDER BY EmployeeID
Table 2 results
EmployeeID CountShipVia2
1
44
2
36
3
45
4
70
5
15
6
25
7
24
8
48
9
19
Table 3 the desired result:
EmployeeID CountShipVia1 CountShipVia2
1
82 44
2
71 36
3
81 45
4
116 70
5
29 15
6
48 25
7
44 24
8
75 48
9
29 19
thanksrobby
I have created a search interface for a large table and I allow users to search on keywords. The users can enter multiple keywords and I build a SQL based on their input to search a full-text indexed table. However the users want to be able to search like an old system they had, where they enter single words and then combine their searches to drill-down into the results. What would be the best method to combine searches?At the moment I can create a merged query from 2 queries if they have searched using single words, but I know down the line it will get far more complicated if they keep combining and merging even with multiple word entries. Each time they search I store the 'where' section of each query, then if they choose to combine I have a function to build a new query through arrays (to eliminate duplicates and sort etc)Is there a better way in SQL to combine queries as sometimes the logic of the combined query means no results are returned (because of OR/ AND conditions in the wrong places etc)e.g.1. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"run"') OR CONTAINS(subject,'"run"'))2. Select count(ID) as myCount FROM myTable where (CONTAINS(title,'"level"') OR CONTAINS(subject,'"level"'))Combined using my function creates:Select count(ID) as myCount FROM myTable where (contains(title,'"level"') AND contains(title,'"run"')) OR (contains(subject,'"level"') AND contains(subject,'"run"'))
When I combine I'm drilling down, so if the first query returns a count of 400 (where the title OR subject contains 'run') and then the second query returns 600 records (where the title OR subject contains 'level') I need to combine so that I'm looking for records where the title contains both keywords 'run' AND 'level' OR else the subject contains both 'run' AND 'level' and I end up with say 50 records where the title has both keywords OR the subject holds both words. I think the main trouble lies if they try combine a previously combines search with a new search. here my logic gets totally thrown and I'm not sure how to handle soemthing like this. Has anyone got any ideas or experience with this kind of functionality? In SQL or even in vb.net is there a method to combine searches easily?
Hey guys, here is my issue, i'm trying to combine multiple columns of data into one row. For example, I have a temp table:
create table #Custom_Address
( patient_idchar(10)null,
episode_idchar(3)null,
custom_address varchar(100) null
)
As you can tell, the 'custom_address' column is going to house the results of the combination.
I am trying to INSERT (combine) using this statement:
INSERT #Custom_Address
select cm.patient_id, cm.episode_id, (cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip) as custom_address
FROM #ClaimMaster cm join Coverage_Custom cc on cm.patient_id = cc.patient_id and cm.episode_id = cc.episode_id
WHEREcc.coverage_plan_add1 > 0
OR cc.coverage_plan_add2 > 0
OR cc.coverage_plan_city > 0
OR cc.coverage_plan_st > 0
OR cc.coverage_plan_zip > 0
GROUP BY cm.patient_id, cm.episode_id
I want to insert the patient_id, episode_id, and then combine the 'cc.coverage_plan_add1 +' ' + coverage_plan_add2 + ' ' + coverage_plan_city+ ' ' + coverage_plan_st+ ' ' + coverage_plan_zip' data to represent my "custom_address" column and only when there is data in those columns.
Then I do my update:
UPDATE#ClaimMaster
SET #ClaimMaster.custom_address = ca.custom_address
FROM #ClaimMaster
JOIN#Custom_Address ca on #ClaimMaster.patient_id = ca.patient_id and #ClaimMaster.episode_id = ca.episode_id
However, when I do this, it says my 'cc.coverage_plan_add1 + etc' columns are invalid because they are not contained in either an aggregate function or a GROUP By clause.
If i'm combining all the data to represent a single column, how do I format my group by clause? Or is my entire INSERT statement wrong?
As a side note, my #ClaimMaster table is another temp table, but the problem is not in there.
I have a query (SELECT * FROM Pricing) that produces the following results
Stockcode|ProductID|OurSellPrice|SupplierTypeID|CompetitorPrice
SC0001___|123______|22.45_______|1_____________|25.23
SC0001___|123______|21.45_______|2_____________|25.23
I want to convert this to the following :
Stockcode|ProductID|OurSellPriceType1|OurSellPriceType2|CompetitorPrice
SC001____|123______|22.45____________|21.45____________|25.23
We only have two types of suppliers but not every product is available from each type of supplier so we might get the following results:
Stockcode|ProductID|OurSellPrice|SupplierTypeID|CompetitorPrice
SC0002___|124______|22.45_______|1_____________|25.23
Stockcode|ProductID|OurSellPriceType1|OurSellPriceType2|CompetitorPrice
SC001____|123______|22.45____________|NULL_____________|25.23
i have these 2 queries with the included results sets...What commands could I use to take the TotalBlueCircle Column from the 2nd Results Set and have it included next to the TotalRugby column in the 1st results set??Do i need to do a UNION or use Sub Queries or something else?
View 5 Replies View RelatedNeed a little help here.
I have a set of product ids fed in as a delimited string and for each I need to extract the top 1 record from another query based on the id.
I need the results as one table.
Here is my code.
___________________________________
SET NOCOUNT ON
DECLARE @IdsString VARCHAR(255), @Id int
SELECT @IdsString = '918|808|1214|89|995|300|526|1207'
DECLARE GetData CURSOR
FOR Select s.ProductID FROM dbo.SplitProductIDs(@IdsString) as s
OPEN GetData
FETCH NEXT FROM GetData
INTO @Id
WHILE @@FETCH_STATUS = 0
BEGIN
SELECT TOP 1 v.*
FROM dbo.GetProductRateView as v
WHERE v.[id] = @Id
FETCH NEXT FROM GetData
INTO @Id
END
CLOSE GetData
DEALLOCATE GetData
_____________________________________
Do I need to create a temp table and do an 'Insert Into(Select...' with each cusor result or is there a better way?
Any help would be much appreciated.
NB Database was not designed and the client will not tolerate any changes to structure of the tables :eek:
Regards
Shaun McGuile
I have a quick question for the SQL community about how to combine 3 tables to get the results needed...
The table names are :
setup_zipcode,
setup_category,
and listing
and inside setup_zipcode it has the columns:
zip_id , zip_code, zip_latitude and zip_longitude
and inside the setup_category it has the columns:
category_id, category_parent, category_path and category_name
and the final table for listing has the columns:
listing_id, listing_member, listing_category, listing_address, listing_city, listing_state, listing_zip and listing_country
I am having trouble getting them to inter-relate an query the needed results as I need to get back the LAT & LONG from the zip_latitude & zip_longitude columns for specific listing ids in certain categories...
So, the ONLY same variable between them is that listing_zip from LISTING table and zip_code from SETUP_ZIPCODE show the same zip codes..
How can I create a SQL query that checks the current category that is being displayed on the page results live and insert only the listing id (clients) that are in that listing_category and also pull that listing_id client's related zip_latitude & zip_longitude that relates to their specific listing_zip from the zip_code row in setup_zipcode?
I have tried many things and this looks like it would work but does not pull the related LAT & LONGs ...
$cat is assigned in a query previously on the page...
SELECT *
FROM
setup_zipcode, setup_category, listing
WHERE
listing_category LIKE '%-$cat-%'
AND
listing_zip = zip_code
AND
category_id = '$cat'
ORDER BY listing_title ASC
When I try to take the results (not sure if I am missing a step for printing the results after querying them or having to assign them somehow) and use the SMARTY TAGS assigned to zip_latitude and zip_longitude nothing shows on the published page... The other variables for the address do..
I have a loop defined as $listing_id and section is var so when I pull the query info using {$listing_address[var]}, {$listing_city[var]}, etc.. they work, but {$zip_latitude[var]} or {$listing_id[var].$zip_latitude} and {$listing_id[var].zip_latitude} so on do not work..
If I can get the variables to exist in the SQL QUERY then at least I will know that is correct and can work on how to get them to show correctly in the address for a map afterwards...
I am currently working on an application that requires, insertion of the results of a SQL Query in to the field of another table, in the form of a comma separated values.
For example, to explain things in detail:
create table dbo.phone_details
(country varchar(20),
state varchar(30),
list_of_toll_free_numbers text)
insert into dbo,phone_details
values
( 'USA', 'CA', 'select Phone from phone_table where substring(phone, 1, 3) in ('800', '866', '877', '888')' )
The final output I desire is:
country state list_of_toll_free_numbers
---------- ------- -----------------------------------------
USA CA 8009877654, 8665764398, 8776543219
I know this has been addressed before but I can't find it...
I have a table with with a column called PersonId. I want a query that will return all the PersonId's as a comma delimited string...
Anyone able to help?
Customers order a product and enter in a source code (sourceCd). This sourceCd is tied to a marketing program. Idea being we can see that 100 customers ordered from this promo, 200 from this catalog, etc etc. The sourceCd that a customer enters is not always accurate so there is a magic process that adjusts this OrigSourceCd into a final SourceCd, that may or may not be the same.
I am trying to generate a result set of customer count by sales program based on both the original and final source code. Problem is, I have to do each query separately because in one, I have to join SourceCdKey to SourceCdKey to get the program associated with that SourceCd and in the other i have to join OrigSourceCdKey to SourceCdKey to get the program associated with the original sourceCd. There are some programs is one results set that are not in the other, and vice versa.
I'm trying to generate a list of that shows customer counts before and after for each program, some which may be null for one, but have counts for the other. I have tries creating 2 separating views and joining them but that doesn't work because it only returns the ones they have in common.
I'm having difficulty coming up with the right syntax for a query. Suppose I have a database containing a Stores table, an ProductInventory table, and a Customers table. The Stores table has an ID field that serves as a foreign key in both the ProductInventory table and in the Customers table. I'm trying to write a query that, for each Store record, will return the total number of records in the ProductInventory table and the total number of records in the Customers table.
The following query returns, for each store, the total number of records in the ProductInventory table:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
GROUP BY Stores.Name
The following query returns, for each store, the total number of records in the Customers table:
SELECT Stores.Name,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
I combined the two queries:
SELECT Stores.Name,
COUNT(ProductInventory.ID) AS ProductInventoryItemCount,
COUNT(Customers.ID) AS CustomerCount
FROM Stores
LEFT JOIN ProductInventory ON Stores.ID = ProductInventory.StoreID
LEFT JOIN Customers ON Stores.ID = Customers.StoreID
GROUP BY Stores.Name
When I run this last query, however, I get an "Arithmetic overflow error converting expression to data type int" error. Using COUNT_BIG instead of COUNT eliminates the error, but the numbers that are generated are astronomical in size. This indicates to me that there is a *lot* more table joining going on than I expected
What is the correct syntax to produce the desired results? I have a few other tables similar to ProductInventory and Customers; I'm hoping to extend the correct syntax so as to be able to get a comprehensive record count list for each store. Thanks for your help!
I have a table of attributes set up as follows:
ID, Value, Group
1, Football, Sports
1, Baseball, Sports
1, Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
etc.
I want a query that will combine that values for each ID into one field per group. So if ID 1 has multiple sports but also a greek attribute, they end up with two rows; the first row containing the combined sports values and the second row the greek valued not combined, because there was only one value in that group for that ID. For example:
ID, Combined Values, Group
1, Football Baseball Basketball, Sports
2, Baseball, Sports
3, Football, Sports
1, Lambda Sigma, Greeks
2, Delta Delta, Greeks
Hello,
I'm not sure if this is possible, but here is what I'm trying to do:
I have a table that contains for example the following:
SPECIES PERCENT
s 19
P 25
B 32
D 24
I want to end up with a single field, titled S_P_B_D with the values 19_25_32_24.
Possible?
Thanks in advance.
Amber
I am needing to combine the Notes field where Number and date are the same...For example
for Number 0000000003 I need notes to Read ('CHK # 2452 FOR $122.49 REJECTED AS NSF ON 2/25/15') the note counter is different for each row, and is combination of special char, 0-Z and looks like the (!) depicts the start of a new Number.
CREATE TABLE [dbo].[MyTable](
[NUMBER] [varchar](10) NULL,
[HD_DATE_TIMEX] [datetime] NULL,
[TRANS_NO] [varchar](2) NULL,
[MESSAGE_COUNTER] [varchar](1) NULL,
[Code] .....
I've seen a number of questions on combining rows, but not one
exactly like this. I have a solution, but I'd like to know
if there are other ways.
I'd like to select and combine rows from a table. Here's a simplified
version of the table:
tab1
key date status
1 1/1/06 stat1
1 1/2/06 stat2
1 1/3/06 stat3
1 1/4/06 stat4
2 1/1/06 stat1
2 1/2/06 stat2
And the desired results:
key date status prevstatus
1 1/1/06 stat1 null
1 1/2/06 stat2 stat1
1 1/3/06 stat3 stat2
1 1/4/06 stat4 stat3
2 1/1/06 stat1 null
2 1/2/06 stat2 stat1
Here's the simplified version of the solution:
select
a.*,b.status prevstatus
from
tab1 a
left join
tab1 b
on a.key = b.key and
b.date =
(select max(date) from tab1 c
where
a.key = c.key and
a.date > c.date
)
Is there a better way?
I need to combine the details of two tables and narrow the data included.
in my tutor table i have
tutorLastName, tutorSessions and tutorSkills
in my term table i have
week, date, session_Name, tutorName
i need to combine the tales to show:
(from the term table) week, date,session_Name, tutorName,
(from the tutor table) tutorSkills.
i then need to narrow the table down so it shows only tutors with guitar skills and the term dats when the session_name is empty
i can run the two searches sepereately but cannot combine them i am tryin to use Where date = "whateverdate" AND session_name is null
AND tutorSkills = guitar
please help and tell me where im going wrong
Hi guys,
I need to get a column with the sum of the field "SUF" from table "JurnalTransMoves_1" when that field ("SUF") is ordered by the field "REFERENCE" from table "Stock", and Show the value only once.
The desired result should by something like:
Stock.REFERENCE
JurnalTransMoves.SUF
SUM(JurnalTransMoves.SUF) Group By Stock.REFERENCE
5752
10
60
5752
20
5752
30
5753
400
3000
5753
500
5753
600
5753
700
5753
800
5754
7
15
5754
8
Is there any chance to do that?
Thanks in advance,
Aldo.
Code Snippet
SELECT
Accounts.FULLNAME AS 'ACCOUNTS.FULLNAME',
Accounts.ACCOUNTKEY AS 'ACCOUNTS.ACCOUNTKEY',
Accounts.FILTER AS 'ACCOUNTS.FILTER',
Accounts.SORTGROUP AS 'ACCOUNTS.SORTGROUP',
AccSortNames.SORTCODENAME AS 'AccSortNames.SORTCODENAME',
Accounts.CreditTermsCode AS 'Accounts.CreditTermsCode',
CreditTerms.DETAILS AS 'CreditTerms.DETAILS'
CreditTerms.CURRENF AS 'CreditTerms.CURRENF'
CreditTerms.MONTH AS 'CreditTerms.MONTH',
CreditTerms.DAYS AS 'CreditTerms.DAYS',
CreditTerms.SHAREPRC AS 'CreditTerms.SHAREPRC',
CreditTerms.TEMF AS 'CreditTerms.TEMF',
CASE
WHEN CAST(Accounts.VatExampt AS int) = 0 THEN 'x'
WHEN CAST(Accounts.VatExampt AS int) = 1 THEN 'y'
ELSE 'Undefined' END AS 'VAT',
Stock.DOCUMENTID AS 'Stock.DOCUMENTID',
DocumentsDef.DOCNAME As 'DocumentsDef.DOCNAME',
CASE
WHEN CAST(Stock.DOCUMENTID as int) = 1 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 3 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 35 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 120 THEN Stock.DOCNUMBER
WHEN CAST(Stock.DOCUMENTID as int) = 31 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 44 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 34 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 43 THEN Stock.REFERENCE
WHEN CAST(Stock.DOCUMENTID as int) = 40 THEN Stock.REFERENCE
ELSE '' END AS 'Invoice No',
Stock.VALUEDATE AS 'Stock.VALUEDATE',
JurnalTrans.DESCRIPTION AS 'JurnalTrans.DESCRIPTION',
JurnalTrans.REF2 AS 'JurnalTrans.REF2',
JurnalTransMoves.SUF AS 'JurnalTransMoves.SUF',
JurnalTransMoves_1.SUF AS 'JurnalTransMoves_1.SUF',
JurnalTransMoves.TRANSID AS 'JURNALTRANSMOVES.TRANSID'
FROM
JURNALTRANSMOVES AS JurnalTransMoves_1
INNER JOIN JURNALTRANSMOVES AS JurnalTransMoves
INNER JOIN (SELECT DISTINCT JURNALTRANSID, RECEIPTSTOCKID, FULLMATCH, TABLFNUM, CKCODE, RSORT, RUSEFID FROM RECEIPTJURNALMATCH) AS ReceiptJurnalMatch_1 ON ReceiptJurnalMatch_1.JURNALTRANSID = JurnalTransMoves.ID
INNER JOIN ACCOUNTS AS Accounts ON JurnalTransMoves.ACCOUNTKEY = Accounts.ACCOUNTKEY
INNER JOIN JURNALTRANS AS JurnalTrans ON JurnalTransMoves.TRANSID = JurnalTrans.TRANSID
INNER JOIN STOCK AS Stock ON JurnalTrans.STOCKID = Stock.ID ON JurnalTransMoves_1.TRANSID = JurnalTrans.TRANSID AND JurnalTransMoves_1.ACCOUNTKEY = Accounts.ACCOUNTKEY
LEFT OUTER JOIN ITEMS AS Items
INNER JOIN STOCKMOVES ON Items.ITEMKEY = STOCKMOVES.ITEMKEY
INNER JOIN ITEMSORTNAMES AS ItemSortNames ON Items.SORTGROUP = ItemSortNames.ITEMSORTCODE ON Stock.ID = STOCKMOVES.STOCKID
LEFT OUTER JOIN ACCSORTNAMES AS AccSortNames ON Accounts.SORTGROUP = AccSortNames.ACCSORTCODE
LEFT OUTER JOIN CREDITTERMS AS CreditTerms ON Accounts.CREDITTERMSCODE = CreditTerms.CREDITTERMSCODE
LEFT OUTER JOIN DOCUMENTSDEF AS DocumentsDef ON Stock.DOCUMENTID = DocumentsDef.DOCUMENTID
WHERE
Accounts.SORTGROUP Between '3001' And '3020'
AND Accounts.ACCOUNTKEY IN ('123456')
ORDER BY Accounts.ACCOUNTKEY
I have 3 queries pulling from the same table, trying to define a count on each criteria. I have the data pulling, but the data is in multiple rows. I want the data in one row with all the counts in each separate columns. Also I need to setup a flag if a client purchased and order within 30 days from their last purchase.
I am doing this select for each credit card, check and cash purchases. I do not know how to setup a flag where the client may have ordered and paid by check or cash after 30 days from a credit card purchase. Is this something that can be done?
select
clientnumber,count(distinct clientnumber) as cccnt,
0 as ckcnt, 0 as cacnt
from dbo.purchases
where orderdate >= 20120101 and orderdate <= 20121231 and
payment_type = 'CC'
group by clientnumber;
OUTPUT currently looks like this:
1234 2 0 0
1234 0 1 0
1234 0 0 4
Is it possible to result in this, along with a flag with the criteria above?:
1234 2 1 4 Y
Hi,
I've got what is probably a simple question, but for the life of me I cannot figure it out and it is starting to do my head in . I have the following query:-
Select e.intEmployeeID AS ID, e.txtFirstName AS [First Name], e.txtLastName As [Last Name], e.txtMobile As [Mobile], i.txtWorkEmail as from EMPLOYEE AS e INNER JOIN EMPLOYEE_INFORMATION AS i ON i.intEmployeeID = e.intEmployeeID WHERE (((e.blnActive = -1) AND (e.txtFirstName Like '%b%')) OR ((e.blnActive = -1) AND (e.txtLastName Like '%b%')) ) ORDER By e.txtFirstName
In my database, the field blnActive is a BIT field. When I try to run this query, I get no results returned. If I remove the (e.blnActive = -1) WHERE statement segment, I get the correct results. The field blnActive contains -1 for every record but I cannot work out why it will not return these records .... aaarrrrggghhhh
Thanks to those who feel my pain !!
Hi
I am trying to make a query from a sql server 2000 database i have a table as follows:
Operatinngsystem FQDomain
============= ========
Windows server1.gnet.net
Windows server2.gnet.net
Windows server3.gnet.net
what i want to be able to do is to return the result so that the server1-3 asre in a seperate colunm and the gnet.net seperate i want the out put as follows:
Operatinngsystem Server Domain
============= ====== ======
Windows server1 gnet.net
Windows server2 gnet.net
Windows server3 gnet.net
therefore three colunms output. I would be greatful if any one got any ideas how i can do this? (Please note im new to sql server)
Thanks
abuhassan
Hi all,I need to put multiple results in one field, but not sure how. Here'ssome sample code:select a.name,a.accountnum,a.ordernum,(select itemid from items where items_ordernum = a.ordernum) asItems[color=blue]>From clients a[/color]There's multiple instances of 'itemid' in 'items' with the criteria Igave, so this generates an error. I want to instead have the itemnumbers listed as just a list seperated by commas, so the results mightbe this:Name AccountNum OrderNum ItemsJohn Smith 12345 0000234 1233, 1333, 4322Mike Jones 43223 0000023 4322, 543And so forth. Is there someway to loop through this sub-query and makethe results become a list?Thanks --rlangly
View 2 Replies View RelatedI have two tables in my data model,
1. Fact table with sales by customer, Territory ID etc
2. Table with targets per Territory ID
I want two combine them in one pivot table.Â
Pivot: Territory;Sales;Target
What I'm getting is the correct column with sales, but the overall sum of all territories in column for targets.Relationship is established between two tables via Territory ID
Is it possible to combine a stored procedure result set and a table into one dataset? For example, if I have a stored procedure with field "TradeID", and a table with "TradeID", can I join the them in a dataset?
Thanks.
Brad
Hi,
I have source table , fact table and four dim. tables , I have to update a field in fact table from source table.
How can I do it?
thanks...
I am trying to pull results from an SQL Server DB into an dataset where a particular field (SMALLDATETIME) is within a particular date range. The code I was using worked fine when the database was in Access. I have made several changes already but am still getting 0 results returned when there is data that should be returned.
I was using in Access:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>=#" & startDate & "# AND myDateField<=#" & stopDate & "# ORDER BY ID"
I have changed this for SQL Server to:
Dim StrSQL = "SELECT ID FROM myTable WHERE myDateField>='01/01/2003 00:00:01' AND myDateField<='01/01/2004 23:59:59' ORDER BY ID"
But I am always returned 0 results even if the date range should return plenty of data. I have also tried using the BETWEEN structure with the same result.
Is there a particular format for the date I am comparing with?
Am I missing something else in my query?
The connection / permissions and everything else are correct as I can read and write data to the database in numerous other pages. It is just this date comparison that is not working.
Many thanks for any help or comments you can provide.
Hi there
We have a web application (database) that uses one field called Application and another called TicketType.
When a user fills out a ticket they can choose up to 3 levels of this field.
Eg Application, Application2, Application3
Eg TicketType, TicketType2, TicketType3
The extra two levels not being compulsory.
I am using sql server 2005 // Reporting Services
My query is as below:
SELECT Ticket.TicketNumber, Ticket.CreatedDate, Application_2.ApplicationName AS Application, Application_1.ApplicationName AS [App 2],
Application.ApplicationName AS [App 3], TicketType_2.TicketTypeName AS Tickettype, TicketType_1.TicketTypeName AS [Type 2],
TicketType.TicketTypeName AS [Type 3], Ticket.Description, Company.CompanyName
FROM Ticket INNER JOIN
TicketType AS TicketType ON Ticket.TicketTypeID = TicketType.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_1 ON TicketType.ParentTicketTypeID = TicketType_1.TicketTypeID LEFT OUTER JOIN
TicketType AS TicketType_2 ON TicketType_1.ParentTicketTypeID = TicketType_2.TicketTypeID INNER JOIN
Application AS Application ON Ticket.ApplicationID = Application.ApplicationID INNER JOIN
Company ON Application.CompanyID = Company.CompanyID FULL OUTER JOIN
Application AS Application_1 ON Application.ParentApplicationID = Application_1.ApplicationID FULL OUTER JOIN
Application AS Application_2 ON Application_1.ParentApplicationID = Application_2.ApplicationID
WHERE (Ticket.CreatedDate >= @StartDate)
ORDER BY Ticket.TicketNumber
End result looks like this:
Application
App 2
App 3
TicketType
Type 2
Type 3
Software
Internal Apps
proACT
SW Other
Office Issues
General
Application
Click Track server
Alert (App)
Service
Network
Other
Network Fault
Software
Internal Apps
Other
User Account
New
Hardware
Network
HW Fault
Application
Click Track server
Alert (App)
Disk space
Office Issues
General
proACT
Configuration
Deployment
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Software
Server Software
SharePoint
SW Fault
App Failure (Function)
Ultimately I would like the Application (TicketType) fields to have the Master Information in it and the other two fields populated in order as well.
Can someone help please.
Please ask if I haven't explained myself.
thanks
Dianne
CREATE TABLE DHS(CUSTOMERNBR VARCHAR(20), CONTRACT VARCHAR(20), SUBCONTRACT VARCHAR(20) , STARTDATE DATETIME, ENDDATE DATETIME, EFLAG VARCHAR(20), HFLAG VARCHAR(20))
The data which will be going into this table is from two table which have a 1 to many relationship:
Here is the 1 side and data:
CREATE TABLE CUSTOMERS(
CUSTOMERNBR VARCHAR(20),
CONTRACT VARCHAR(20),
SUBCONTRACT VARCHAR(20),
STARTDATE DATETIME,
ENDDATE DATETIME DEFAULT '12/31/2099')
[Code] ....
Here is the Many side and data:
CREATE TABLE FLAGS(CUSTOMERNBR VARCHAR(20), FLAGCODE VARCHAR(20), STARTDATE DATETIME, ENDDATE DATETIME DEFAULT '12/31/2099')
INSERT INTO FLAGS(CUSTOMERNBR, FLAGCODE, STARTDATE, ENDDATE) VALUES('10001000101', 'H', '02/01/2014', '03/31/2014')
[Code] ....
The CUSTOMERS table holds the record date span into which the FLAGS table records have to "fit". In no case will the date spans from the FLAGS table fall outside the STARTDATE - ENDDATE span in the CUSTOMERS table for any CUSTOMERNBR. Here is an example of the final expected output in the DHS table from combining records in the CUSTOMERS and FLAGS tables:
CUSTOMERNBRCONTRACTSUBCONTRACTSTARTDATEENDDATEEFLAGHFLAG
10001000101A910400801/01/201401/31/2014
10001000101A910400802/01/201403/21/2014H
10001000101A910400804/01/201404/30/2014
10001000101A910400805/01/201405/31/2014H
10001000101A910400806/01/201412/31/2099E
10001000102A555500101/01/201403/31/2014E
10001000102A555500104/01/201404/30/2014EH
10001000102A555500105/01/201406/30/2014E
10001000102A555500107/01/201412/31/2099
10001000103A666600401/01/201410/01/2014
I have a temporary table (@tblResults) that has 4 columns that need to be populated with a calculation made from columns held within 2 other tables.
Joins
@tblResults tr JOIN dbo.MarketPrice mp
ON tr.Item = mp.Item
AND tr.[Month] = mp.[Month]
AND tr.[Year] = mp.[Year]
AND mp.[Date] BETWEEN tr.LatestStartDate AND tr.PriorEndDate
[code]....
Where the 2 dbo.MarketPrice and dbo.MillDifferentials date fields are NOT equal, the last (chronologically) dbo.MillDifferentials.Diff value should be used (or '0' if no previous value found).
so expected results where @tblResults.Id = 1:
The dbo.MarketPrice.Price value of '2014-10-29' should be combined with the dbo.MillDifferentials.Diff value of '2014-10-06' - this produces the combined Max value of 184.50
The dbo.MarketPrice.Price value of '2014-04-28' should be combined with the dbo.MillDifferentials.Diff value of '2014-04-28'
The dbo.MarketPrice.Price value of '2014-01-22' should be combined with the dbo.MillDifferentials.Diff value of '2014-01-20'
The dbo.MarketPrice.Price value of '2014-01-21' should be combined with the dbo.MillDifferentials.Diff value of '2014-01-20' - this produces the combined Min value of 111.50
The dbo.MarketPrice.Price value of '2014-01-04' should be combined with '0.00' if there is no matching or previous dbo.MillDifferentials.Diff value OR the top 1/max (most recent) dbo.MillDifferentials.Diff value if a record is found before the specified @tblResults.LatestStartDate
Hi Guys, I am experiencing weird results
SELECT DSNew, DTTM, RQDT
FROM dbo.Feb
INNER JOIN DMSEFL
ON ACTR = DSNew
where cast(DSNew as varchar(20)) = cast(ACTR As varchar(20))
If I run the above query I get zero recs back.
If I substitute a Value then I get the desired results (ie. where DSNew = '93235500') or if I enter (ACTR = '93235500') or if I put (where DSNew = '93235500' AND ACTR = '93235500')
Can anyone suggest a reason why this is happening. I know the records exist on both tables I ran the query in Acess and got the desired resutls.
Thank you,
Trudye
When I am using a SQL Query I have an ability to control whether or not I am able to Include the Column Headers when copying or saving results.
The control exists in the Options > Query Results > Results to Grid > Include column headings etc.
My question is how to get this same ability when attempting to copy the results of a VIEW vs. a Query.
The idea is that when I setup a view it€™s a drag/drop type of query building (query building for dummies if you will). Once I have a view and click the Execute icon it will return all the records selected by the View. However, when I click the upper left/top box to select all rows and column and then try to copy/paste the records into Excel all the data copies just fine but the field name/column headers are not there.
How can I get the header fieldname date to copy/paste from View result set that I'm able to copy from a Query result set?
Thank you,
Mike