Excuse the cross post (to VBexpress fourum) but maybe someone here will have a different take?
have searched all around can't seem to see how to configure a SQL2005 developer ed so I can use vb express to develop a local front end. keep getting "the user instance login flag is not supported on this version of sql server" I have configured the .net framework via aspnet_regsql.exe. Also I configured the "Machine.config" file. but so far no luck.
Selecting sql2005 as the server thru the add new database connection in advanced area yields the error message
surely there is away.
So far still no joy,
While Scotty indicates that the connection to SQL2005 is intentionally hampered other posters indicate that the user instance problem can be solved by running the .net config tool to add the asp database to sql server, which I have done.
However this does not yet work.
I cannot get the code to spark yet.
Again my configuration cannot be any simpler. sql express sp1 and sqldeveloper on the same machine using windows security (all installed with default cofigurations)
In the absence of other ideas I may try to get sql express downloaded and going, I'm not sure what issues that will present re: what I'm trying to develop.
I'm trying to develop the skills to replace some fairly involved reporting and some user table interface that I had going in access2003, I hate to pruchace a big piece of sw when I don't know if it will remove the current roadblocks...
Appreciate the help here, but doesn't someone have a "simpler" complete answer? I.e. one that would get the developer database to accept the connection wizard? (user instance issue)
When attempting to use VWD Express' built-in web server I recieve the following error in browser window: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I've done the following:
Followed advise on How to: Configure Express to accept remote connections
Retrieved port_address from SQL Server Configuration Manager (i.e. SQL Server 2005 Network Configuration > Protocols for SQLEXPRESS > Select TCP/IP Protocol name > RT click on Properties > IPALL - TCP Dynamic Ports port_address
netstat -ano | findstr "port_address" shows the following
HResult 0x2AF9, Level 16, State 1 TCP Provider: No such host is known. Sqlcmd: Error: Microsoft SQL Native Client : An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.. Sqlcmd: Error: Microsoft SQL Native Client : Login timeout expired.
I can successfully connect to SQLEXPRESS using SQLCMD with flags - S .sqlexpress and -S np:\:\.pipeMSSQL$SQLEXPRESSsqlquery (named pipes)
Using VWD Database Explorer I have connected to my SQL Server 2005 Express databases and the Test Connection button on the Modify Connection form reports the connection strings are good. Lastly SQL connection string property field User Instance = True and neither database resides in "My Documents" folder.
Questions:
Does VWD local web server require configuration?
Is this a Named Pipe or TCP/IP configuration problem? Should Shared Memory be disabled?
Should I give up on VWD local webserver and install IIS instead?
I have downloaded and installed VS C# Express Orcas beta 1. It appears that Express editons ov VS can only connect to SQL2005 Express and not to a high end edition which I have on my computer. In one of the Orcas forums, it was suggested that I can install SQL2005 Express side by side my high end SQL 2005. To play it safe, I wanted to get a confirmation from this forum before I do that. Is a side-by-side installation ok? thanks.
I can't tell if the SQL Developer install upgraded the service, but left the SqlExpress version information, or if I'm still really only using SqlExpress.
Also, my intended target is SQL Enterprise, so if I am using SQL Express am I asking for trouble when I go to move the database over? Are the database formats compatible?
I've poked around trying to search for this answer for a while and haven't turned anything up. Maybe I'm searching on the wrong terms...
I'm trying to register a developer's 2000 pc from my 2005 pc.
i'm not sure this is even something possible from Dev Edition to Dev Edition- I can register a 2000 server just fine.
I can ping him. Both our systems have remote access 'on'. His server is (local), i've tried connecting to it by just entering his machine name and by using just the ip address. The error I get is "timeout expired. The timeout elapsed prior to completion of the operation or the server is not responding."
Am I just not registering this properly? I entered just the ip address in the 'server' box. I am connecting as sa with the pw he gave me. When i connect to my server, I use the ip addressinstance. However, I am not sure what to use for the instance when all I see when I look at his machine is (local).
Hi, I'm having a problem installing SQL2005 Developer on Windows Vista.
At the System Configuration check page, I'm getting the IIS Feature Requirement item telling me IIS is not installed or disabled. This is not the case.
I have read article http://support.microsoft.com/kb/920201 and switched on the IIS components as specified.
I've tried installing with Firewall, virus checker etc switched off. Every time I get the same problem. This is an issue, as I specifically need Reporting Services installed.
When I downloaded/started using Visual Web Developer I was under the impression that I needed to install SQL Server Management Studio Express in order to create/manage databases, and to provide the engine to access the data. Since then I have found tutorials and have successfully created/used databases solely from within Visual Web Developer. I'm assuming that Visual Web Developer includes a database engine, much like the webserver that is included. (This is an awesome thing). When I tried to upload my web application with database to my production server, the database would not work, it started working after I installed SQL Server Management Studio Express on the server. Is it my understanding that you need SQL Server Management Studio Express if you do not have Visual Web Developer Express installed in order to provide the data access engine? Also, I am unable to "attach" my Visual Web Developer Express created database to SQL Server Management Studio Express. Are there any posts that provide more information about this topic?
The only reason I'm asking is that I have extra whitespace on the end of my text fields, and I thought ANSI_PADDING was turned on. I do not see the option in Visual Web Developer Express, but have found it in SQL Server Management Studio Express.
Here is the error message I get:http://img109.imageshack.us/my.php?image=error2ug.jpgI have just installed both packages and havent done much in the way of configuration... What do i need to do? Thanks!
Hi, I'm completely new to SQL Server and ASP.NET, so please bear with me on my learning curve! I've installed Visual Web Developer Express and SQL Server Express (on the same PC). I then used Web Developer Express to successfully create a new database with a couple of tables in it. So far so good. I then installed SQL Server Management Studio Express on the same PC and tried to connect to my new database. The connection to the SQL Server instance appears to work OK (using Windows Authentication) but I can't see the database I previously created. All I can see are the System Databases. Does anyone know what the solution might be?
Can someone here confirm or deny that Visual Web Developer 2005 Express Edition doesn't work with SQL Server Developer Edition 2005?
I was about to order SQL Server Developer Edition 2005 on Amazon, to use with Visual Web Developer 2005 Express, when I read a user comment that the two are incompatible with each other. Does anyone know for sure if that is true?
What I'm wanting to do is develop an ASP.NET web application on a web host using a SQL Server database. I use VS2003 and SQL Server Enterprise 2000 at work, but I'd like to learn the 2005 editions for this side project. I don't own any of the developer tools/IDEs personally, so I'm trying to find the most affordable way to do this for my home business.
I have installed Visual Web Developer Express and its companion SQL Server 2005 Express in my Windows XP Professional box.
Now I want to create a database using Visual Web Developer. I opened the Database Explorer and right clicked on Data Connections icon but what I am seeing is an inactive "Create new database" command.
How can I make it active ? How to create a database using my Visual Web Developer?
I've installed SQL Server 2000 Developer Edition on a Windows XP ProSP2 machine. It's installed without any problems.When I try to connect to it from another XP SP2 machine (by creatingan ODBC data source) I get a Login error:[ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen(Connect()).Connection failed: SQLState: 08001 SQL Server Error: 17SQL Server does not exist or access deniedI can ping the server fine from the other machine, and I've tried thestandard "sa" user/pw as welll as my own logins.The server is configured for mixed authentication (Windows/SQLServer).Can anyone suggest what the problem might be?TIA for any helpIan
I'm using Microsoft SQL Server 2005 Developer Edition and I installed it under "Local System" on Microsoft Windows Vista Ultimate.
I understand that there are issues of course that occur with this, however I can't seem to understand why what I'm doing isn't working. I'm not using this on any server, just to test out ASP.NET 2.0 applications - nothing more.
I'm getting this error:
TITLE: Connect to Server ------------------------------
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
I've installed this via a mixed authentication (as suggested by www.wrox.com).
I tried enabling the TCP/IP and named pipe connections, just as previous people have done, but it hasn't worked. Nor has enabling the SQL Browser.
Sql server type: database engine server name: authentication: sql server authentication login: sa password: xxxxx
I remember the server name being sqlexpress (I think that was the default name during the install).
OR are they asking for my computer name? because I tried that also and it gave me an error saying "the default installation doesn't allow remote connections"
I recently migrated our database from Access to SQL Server 2005. All the WinXP users can connect to the new SQL2005 database. But all the Win2K machines fail to log on. To diagnose the problem, I tried to connect from a Wind2K machine using an .udl file. The connection failed because "a provider failed to initialize".
The SQL2005 server is residing on a WinXP machine. Users log on via SQL Server authentication layer using a dedicated login that only has read/write privileges to one specific database.
I am trying to remotely connect to a SQL 2005 Instance on a cluster. I see the following error:
No retry on exception System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I have enabled TCP/IP , Named Pipes on the node. I have turned off IPSec on the clients as well. I am using the following connection string : "Integrated Security=SSPI;server=servernameinstancename;Pooling=false;database=TrialDB"
I have an interesting problem. I am running xp pro and when I try to connect to an instance of SQL2005 running on WIN2003 using SQL Sevrer Management Studio, I get the following error:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (.Net SqlClient Data Provider)
This instance is protected by a vpn and is running on a clustered environment. I can connect to other SQL2000 servers that are running on a clustered environment and SQL2005 that is not clustered.
After adding a host file entry, I was able to connect to the server using OSQL. I was able to telnet into the port the server is listening on.
Others in my group can connect to the server using SQL Server Management Studio with no problems. They are running Win2003 Server. I originally could connect to this server, but I needed to change my password. After that I lost my remote connectivity. I can RDP into the server and map drives to the server. I map to a local administrator of this machine.
HiI'm new this .I' using SQL 2005 VWD05.Could some body tell me how to upload to my host server database to to run a membership user account.I dont know what are the procedure to do on my pc in order to transfer the file on the database.Thanks
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
Hi, Can I use Sql Express Edition with Visual Web Developer at the same time? I tried but I always get a permission error. Also, when I try to attach a database (that I created in Visual Web Developer) to the SQL Express i cant find the .mdf file, I don't know why? Is there is a way where I can specify a folder where I can keep the mdf and allow both applications to access it?
I Am developing a simple app with a database. All has been going fine until now, the following is occuring:In Visual Web Developer 2005 Express if I connect to the database and view some table data I can do that fine but then as soon as I try to view a page in the browser I get the error:Login failed for user 'MachineNameASPNET'If in web developer I go to the database explorer and close the connection to the database then refresh the page it all works fine.Anyone have anyideas on how to correct this? ThanksScott
Can I have both of them installed ? I work on applications sometimes on two different machines. One has Visual studio w/ sql 2005 developer edition, the other with express editions of both. Can I install sql express on my workstation that already has developer edition ?
I have Visual Studio 2005 Team Suite and have SQL Server Express installed from the initial setup. I would like to replace the Express edition with SQL Server 2005 Developer edition. I am currently developing for SQL 2000 and also have Enterprise Manager installed locally. Will the Developer edition install offer the option to unistall the Express edition (I don't need both installed)? Or do I need to uninstall Express manually and then install Developer. Also is there anything I have to be wary of in terms of making sure I am still able to debug SQL 2000 sprocs etc. in VS?
Hi: I have installed SQL 2005 Developer Edition and VS 2005. Do I need to also install SQL 2005 Express edition too?????
My version of VS2005 is proffesional. I cannot seem to find SQL 2005 Developer Edition in the Server Explorer of VS2005. So I am wondering if I need to install SQL 2005 Express. Before I had SQL 2000 and MSDE installed with VS2003 and there was no problem.
Hello I got a sql server express that i am trying to connect form win or web forms(2.0) €“ express as well.
My problem: Can not connect to the server in any way! Even the designer cont find any sql server on my machine; for example "the data source configuration manager" (gui) in enyn way its can not find the sql server express (2005)
So my question is: if all what i used is the express version - is it possible to connect and use the sql.s express form the vs. express
I recognize that this question borders on blasphemy but I am curious as to whether there is a version of sql2005 express for the mac platform. Would like to keep a compatible local instance of 2005 on my mac notebook.
Herre is my connection string:<add name="PageEngine" connectionString="Data Source=MyServerSQLEXPRESS;Initial Catalog=PageEngine;Integrated Security=True;User ID=MyID;Password=MyPwd;" providerName="System.Data.SqlClient"/>When I run the app using WDE (Web Developer Express), Everything works fine. I can access and diplay data from the database with no problems. However, when I try to run it from a browser on the local machine or a remote machine it fails to create a datareader. I am using the Database factory from Enterprise Library. IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine");if (dr.Read() != false) (* this is the line it fails on every time){_ApplicationName = dr["ApplicationName"].ToString();_Version = dr["Version"].ToString();_Copyright = dr["Copyright"].ToString();_Owner = dr["Owner"].ToString();}dr.Close(); Here is the "DataReaderFromStoredProcedure" methodpublic IDataReader DataReaderFromStoredProcedure(string spName, peParameters parameters, string connection){Database db;if (connection != null)db = DatabaseFactory.CreateDatabase(connection);elsedb = DatabaseFactory.CreateDatabase();DbCommand dbCommand = db.GetStoredProcCommand(spName);dbCommand.CommandType = CommandType.StoredProcedure;Here is the error message I get:Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.Source Error: Line 53: IDataReader dr = pe.DataReaderFromStoredProcedure("pe_GetApplicationInformation", null, "PageEngine"); Line 54: Line 55: if (dr.Read() != false) Line 56: { Line 57: _ApplicationName = dr["ApplicationName"].ToString();Source File: c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs Line: 55 Stack Trace: [NullReferenceException: Object reference not set to an instance of an object.] PageEngine.ApplicationInformation..ctor(Page pg) in c:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkingApp_CodeBusiness LayerApplicationInformation.cs:55 login.GetTitle() in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:45 login.Page_Load(Object sender, EventArgs e) in C:Public FoldersITWebSite ProjectsScotts_SandboxPageEngineWorkinglogin.aspx.vb:13 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +47 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1061 Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42 I have tried so many things found on the forums, I don't know what to do anymore![:'(]