Connection Lockout
Oct 24, 1999
I have a custom application running against sql7 that has twice "locked up" sql7. The locked up symptom is that sql 7 will not allow any connections,
even from enterprise manager (server xxxxx is not responding........). The application returns an error that says the
"xxxxx" database is not available, using master instead. A look at the NT event log and the sql7 log provide no help. The OS is running fine and
existing connections (by the application) are still allowing database writes. How do trap what is causing sql7 to stop responding to connection
requests. I am presently starting and stopping the mssql service to get things running, but I really need a root cause. Any troubleshooting tips for
this would be greatly appreciated. Thanks in advance!
View 1 Replies
ADVERTISEMENT
Feb 11, 2008
Can anyone tell me how a user gets lockedout in sql 2005. ?
View 4 Replies
View Related
Aug 28, 2006
Hi,
I have been seeing a basic scenario of a write transaction appearing to unexpectedly lock-out reading.
The database has isolation set to "READ COMMITTED".
The scenario is:
1.) Start a transaction (for doing a write)
2.) Do a read before the transaction (for doing the write) is committed (e.g. sqlCommand2.ExecuteReader()).
--> the code will appear to lock-up (then time out).
I see the same behavior if I step through the "write" code with the debugger (to a point after the transaction is started, but before it is committed), and run a "SELECT * FROM" type query from Microsoft SqlServer Management Studio.
Following is the code sample demonstates the issue.
Thoughts on how to resolve the issue (to let me do "read committed" reading of the database table)?
Thanks!
Andy
Module Transaction
Sub Main()
Dim exception1 As Exception
Try
' Create/Open Database Connection
Dim sqlConnection1 As New System.Data.SqlClient.SqlConnection("Server=GRB-AB;Database=Transaction;Trusted_Connection=True;")
sqlConnection1.Open()
' Start transaction
Dim sqlTransaction1 As System.Data.SqlClient.SqlTransaction = sqlConnection1.BeginTransaction()
' Set Parent record
Dim sqlCommand1 As New System.Data.SqlClient.SqlCommand("INSERT INTO Parent (Name) VALUES ('ParentValue');", sqlConnection1)
sqlCommand1.Transaction = sqlTransaction1
sqlCommand1.ExecuteNonQuery()
' Get Id from parent record (note: this code assumes the table was empty when this program starts)
sqlCommand1 = New System.Data.SqlClient.SqlCommand("SELECT Id FROM Parent;", sqlConnection1)
sqlCommand1.Transaction = sqlTransaction1
Dim parentId As Integer = CType(sqlCommand1.ExecuteScalar(), Integer)
'
' Do reading test to test concurrently reading table being written to
'
' Create/Open Database Connection for reading test
Dim sqlConnection2 As New System.Data.SqlClient.SqlConnection("Server=GRB-AB;Database=Transaction;Trusted_Connection=True;")
sqlConnection2.Open()
Dim sqlCommand2 As New System.Data.SqlClient.SqlCommand("SELECT Id FROM Parent;", sqlConnection2)
sqlCommand2.ExecuteReader()
Dim i As Integer
While (sqlCommand2.ExecuteReader.Read = True) ' <===== LOCKS UP HERE **************
i = i + 1
End While
'
' End reading test
'
' Set child record
sqlCommand1 = New System.Data.SqlClient.SqlCommand( _
"INSERT INTO Child (Name, ParentId) VALUES ('ChildValue', " & parentId.ToString & ");", sqlConnection1)
sqlCommand1.Transaction = sqlTransaction1
sqlCommand1.ExecuteScalar()
' Either 1.) commit transaction OR 2.) rollback transaction
Dim test As Boolean = False
If test = False Then
sqlTransaction1.Commit()
Else
sqlTransaction1.Rollback()
End If
sqlConnection1.Close()
sqlConnection2.Close()
Catch ex As Exception
exception1 = ex
End Try
End Sub
End Module
View 1 Replies
View Related
Sep 1, 2006
I am running this code in a job:
EXEC msdb.[dbo].sp_send_dbmail
@profile_name = 'Blah Blah',
@recipients = 'blah@blah.com',
@subject = 'Server Report 1',
@body = '',
@execute_query_database = 'DBInfo',
@query = 'EXEC dbo.usp_SvrRpt1;',
@query_result_header = 0,
@query_result_width = 300,
--@attach_query_result_as_file = 1,
@query_result_separator = '';
GO
Because I am creating a total of 6 server reports, I alter the subject and query like so:
@subject = 'Server Report X' --where X is replaced with values 1 to 6
@query = 'EXEC dbo.usp_SvrRptX' --where X is replaced with values 1 to 6
I can run 4 reports without any problems. If I run more than 4 reports in the same batch, my network account under Windows 2000 Activity Directory is locked out as if I had erroneously mistyped my password the number of time to meet the lockout requirement - in this case, the number is 3 login tries.
Is this a known problem with Database Mail? If so, is there a fix or workaround?
Thanks,
Neal
View 8 Replies
View Related
Dec 1, 2015
why does select @@lock_timeout return -1. Shouldn't this return lock timeout in milliseconds?
View 2 Replies
View Related
May 24, 2015
Does SQL Server have any place to configure an account Lockout Threshold (SQL-authentication), also is there a default value (how many times failed logging would be initiated before the user lockout?)
View 7 Replies
View Related
Aug 23, 2006
I added a connection (ADO.NET) object by name testCon in the connection manager - I wanted to programmatically supply the connection string. So I used the "Expressions" property of the connection object and set the connectionstring to one DTS variable. The idea is to supply the connection string value to the variable - so that the connection object uses my connection string.
Then I added a "Backup Database Task" to my package with the name BkpTask. Now whenever I try to set the connection property of BkpTask to the testCon connection object, by typing testCon, it automatically gets cleared. I am not able to set the connection value.
Then after spending several hours I found that this is because I have customized the connection string in testCon. If I don't customize the connection string, I am able to enter the "testCon" value in the connection property of the BkpTask.
Is this an intrinsic issue?
View 2 Replies
View Related
Feb 6, 2008
I have a package that uses a for loop to iterate through an unknown amount of excel files and pull their data into a table. However, there will be cases when the file is corrupted or has some sort of problem so that either the transformation will fail or the excel data source will fail with an oledb connection error.
Could anyone suggest a clean way to trap these errors? Specifically, the "Cannot Aquire Connection from Connection Manager", which is the excel connection.
Thanks,
John T
View 3 Replies
View Related
Mar 9, 2007
All --
Please help.
I have some questions about connection strings.
BACKGROUND...
Note that I am using the "SQL Native Client OLE DB Provider", SQL Sever 2005 Express, ASP.NET, C#.NET, and VS.NET 2005.
Note that I do not want to use the "Attach a database file" type of connection string.
Note that I am using the site http://www.ConnectionStrings.com as a reference.
Note that this "Standard security" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Uid=MyDatabaseUser;Pwd=MyDatabasePassword;" />...does not work and causes the following run-time error...A connection was successfully established with the server, but then an error occurred during the login process. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.)
Note that this "Trusted connection" connection string...<add name="LocalSqlServer" connectionString="Server=MYTESTOFFICESERVERS;Database=MyDatabase;Trusted_Connection=yes;" />...works but is less-than ideal because it uses a Trusted Connection rather than a Username/Password combination.
QUESTIONS...
(A) What exactly does the error in Item 4 mean?
(B) Do 4 and 5 imply that one must use a Trusted_Connection for all SQL Server 2005 Express connection strings when the database does not reside in the web application's App_Data folder or use a "Attach a database file" type of connection string?
(C) Are there any alternatives?
(D) What do you suggest?
Please advise.
Thank you.
-- Mark Kamoski
View 1 Replies
View Related
Apr 7, 2008
When running the project in debug mode or non-debug mode, I get the following error from MS Visual Studio:
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Package [Connection manager "SYBASE_CONNECTION"]: The connection manager failed to defect from the transaction.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas???
View 8 Replies
View Related
Mar 4, 2008
Hi All,
We are using the Windows Task Scheduler as a substitute for the SQL Server Agent, which isn't available in the Express edition. The scheduled task just calls a batch file, which in turn, runs a stored procedure using osql with the -E option for a Trusted Connection.
SQL Server Express has been installed using the defaults, which means the service is running in the "NT AUTHORITYNETWORK SERVICE" account. The scheduled task we create is set to run using the "NT AUTHORITYSYSTEM" account.
Now we find that on Windows Vista (tested using Ultimate Edition) that the scheduled task fails to run the stored procedure until the machine is rebooted the first time after installing SQL Server Express. When I say "fail", I mean that the stored procedure isn't executed. The scheduled task however completes and reports no errors. On Windows XP, we do not run into this problem so I suspect it has something to do with the UAC in Vista?
We further found that after installing SQL Server Express and creating the scheduled task in the "NT AUTHORITYNETWORK SERVICE" account, the scheduled task (and stored procedure) runs fine WITHOUT requiring a reboot.
Can anyone explain why a reboot is needed to get SQL Server Express to run the scheduled task correctly under Windows Vista and the SYSTEM account?
Any help or thoughts greatly appreciated.
View 2 Replies
View Related
Sep 27, 2007
Hi,
I'm having a BIG problem, this is my 3rd day looking for answer !I'm trying to create a custom membership provider with MS SQL database 2005 but not the default ASPNETDB. I've changed the web.config to be as following:<connectionStrings><add name="sqlConn" connectionString="Data Source=.;Integrated Security=True;Initial Catalog=ASPNETDB;"providerName="System.Data.SqlClient" /></connectionStrings> <system.web><trace enabled="true" /><roleManager enabled="true" /><authentication mode="Forms" />
<membership defaultProvider="MySqlProvider"><providers><remove name="AspNetSqlProvider"/><add name="MySqlProvider" connectionStringName="SqlConn" type="System.Web.Security.SqlMembershipProvider" applicationName="/" /></providers></membership>
But when I try to login to the site using the login control the following error occurs:
Server Error in '/etest' Application.
Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: The connection name 'LocalSqlServer' was not found in the applications configuration or the connection string is empty.Source Error:
Line 149: <roleManager>
Line 150: <providers>
Line 151: <add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 152: <add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
Line 153: </providers>Source File: C:WINDOWSMicrosoft.NETFrameworkv2.0.50727Configmachine.config Line: 151
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.213
It is clear that this is a prblem with my Machine.Config file - since I've "worked!" on this file for a while. But when I've checked the Machine.config file I've found the LocalSqlServer connection it is talking about! .
I'm lost and I dunno what to do, can anyone help?
Here is the mahine.config in case if you need it:<connectionStrings>
<add name="LocalSqlServer" connectionString="data source=.;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true" providerName="System.Data.SqlClient" /></connectionStrings>
<system.data><DbProviderFactories>
<add name="Odbc Data Provider" invariant="System.Data.Odbc" description=".Net Framework Data Provider for Odbc" type="System.Data.Odbc.OdbcFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="OleDb Data Provider" invariant="System.Data.OleDb" description=".Net Framework Data Provider for OleDb" type="System.Data.OleDb.OleDbFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="OracleClient Data Provider" invariant="System.Data.OracleClient" description=".Net Framework Data Provider for Oracle" type="System.Data.OracleClient.OracleClientFactory, System.Data.OracleClient, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" /><add name="SqlClient Data Provider" invariant="System.Data.SqlClient" description=".Net Framework Data Provider for SqlServer" type="System.Data.SqlClient.SqlClientFactory, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Mobile Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" /></DbProviderFactories>
</system.data><system.web>
<processModel autoConfig="true" /><httpHandlers />
<membership><providers>
<add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="LocalSqlServer" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="true" applicationName="/" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="7" minRequiredNonalphanumericCharacters="1" passwordAttemptWindow="10" passwordStrengthRegularExpression="" /></providers>
</membership><profile>
<providers><add name="AspNetSqlProfileProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></profile>
<roleManager><providers>
<add name="AspNetSqlRoleProvider" connectionStringName="LocalSqlServer" applicationName="/" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /><add name="AspNetWindowsTokenRoleProvider" applicationName="/" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</providers></roleManager>
</system.web>
View 8 Replies
View Related
Apr 15, 2015
I use SQL Server 2012 and visual studio 2010.I created SSIS Project with task "Execute Package". Control flow view as: Package1 (execute package) -> Package2 (data flow).Data flow in Package2 view as: ADO.NET source -> ADO.NET destination.
When I started Package2, it's work. I havn't errors.But when I started Package 1 I have error "Unable to get managed connection from the Connection Manager runtime". In execution log I see that ADO.NET source produced this error on verification stage. Package failed on verification stage, not on execution stage.Why when I started Package 2 it work, but when I started Package1 (and Package1 started Package2) it failed?
View 14 Replies
View Related
Sep 16, 2015
I am using sqljdbc41.jar to connect with MSSQL database, it is working fine on my local machine.Where as on the remote server, same class giving me error
Login failed for user '<domain><windows loginID>'
My connection string is URL...
I am using sqljdbc41.jar and on 64 bit processor , I am using following command which included path for sqljdbc_auth.dll java -Djava.library.path= C: sqljdbc_4.1enuauthx64 TestDao and error is Login failed for user '<domain><windows loginID>' why it is not picking up username passed in connection string. I have 2 machines, one is local and other is remote. on both machine I login using my domain, it is working absolutely fine on local then why the error is coming on remote machine.Both the machines are identical.
View 4 Replies
View Related
Jul 10, 2007
When using jdbc with IntegratedSecurity, I run into this problem when the machine is not part of a domain & gets its IP address via dhcp. Is this expected behavior or a bug in the jdbc driver.
The SQLServer and client application are installed on the same machine and a local admin is logged in, running the client app.
If I change one of the two parameters mentioned above, the connection can be established leading me to believe this may be intentional for security issues. Am I correct?
View 6 Replies
View Related
Aug 30, 2006
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
View 1 Replies
View Related
Feb 15, 2008
I created a single step plan that does integrity checks. It fails with the error below. I created a new connection using our clusters virtual sql name.
Executed as user: ACCTCOMsqlagent. ...n 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:10:06 PM Error: 2008-02-15 13:10:49.02 Code: 0xC00291EC Source: {0CF32F3D-A8D1-492A-9C0F-AD4E0FC67D14} Execute SQL Task Description: Failed to acquire connection "Local server connection". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error Warning: 2008-02-15 13:10:49.02 Code: 0x80019002 Source: OnPreExecute Description: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning Error: 2008-02-15 13:11:31.26 Code: 0xC0024104 Source: Check Database Integrity Ta... The package execution fa... The step failed.
The agent and db are running under domain accounts and the job is owned by sa.
Thanks for your help.
View 13 Replies
View Related
Apr 26, 2007
I am accessing SQL2005 with C# code using OleDbConnection.
A try and catch block catches the following error once a while between the Open() and Close() of the connection:
ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.
I do not even have any idea where to start to debug this. The ExecuteNonQuery() runs a delete SQL query. It works 99.9% of the time. I do not see anything wrong when this error happens.
Any hint would be greatly appreciated.
View 9 Replies
View Related
Jun 7, 2007
Hi,
i am getting this exception i.e."
The TCP/IP connection to the host has failed. java.net.ConnectException: Connection timed out: connect" whenever i try to connect to the remote DB which is present at a different system.
View 2 Replies
View Related
Feb 14, 2008
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
View 5 Replies
View Related
Jun 22, 2006
I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.
File looks like this lets call column names Col A,B,C,D
70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96
flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,
OLE DB Connection Destination (SQL Server 2005)
CREATE TABLE [dbo].[PT_CUST_ABR](
[PARTY_NO] [float] NULL,
[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[TELECOMABR] [float] NULL,
[GENIABR] [float] NULL,
Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly €œ70000893€?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That€™s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave
View 3 Replies
View Related
Sep 7, 2007
I am working in a distributed environment, I verified msgs have been successfully send from server1 db1 to server2 db2, but I still get the following error msg from the sender server through SQL profile:
Connection attempt failed with error: '10061(No connection could be made because the target machine actively refused it.)'.
Does anyone experienced the samething?
Thanks!
View 5 Replies
View Related
Mar 7, 2006
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
View 20 Replies
View Related
Apr 2, 2008
Let me set the stage of my testbed configuration: On Windows XP SP2, my default connection to the Internet is via wireless express card modem using EV-DO via Verizon Wireless. Let's call this connection A. I also have a traditional wireless network connection (802.11g) that is always enabled. Let's call this connection B. Connection A is always connected during normal business hours. Connection B is not and is often searching for a wireless network to connect to when nothing is in range.
Yesterday, connection B was continuously trying to connect to a wireless network not under my control, meaning that the connection was never established and notification messages continually popped up to complain of this fact. Over time, I've learned to ignore these messages and go on doing my daily work without much thought of the possible implications.
Then, things started to get odd. I was running our application, WebWatchBot, to perform some simple tests of various websites and servers, when I started to get messages from the application that database connectivity was lost, which is a message that pops up to inform the user that the connection is forcibly dropped by SQL Server. After a few moments, the connection to the database was re-established and the message went away. Since I was actually working with SQL Server, I thought it was an anomoly, so I continued on. Then, it happened again. And again. Then, I noticed that the "database connectivity lost" message started to coincide with the wireless connection's (connection B) inability to connect with a wireless network.
Why would this be happening? The database and application are on the same exact computer. The connection to the database is via ODBC drivers over tcp/ip, but why would connection B affect this?
Some added information that may prove useful:
Client side:
What is the connection string in you app or DSN? (please specify)
DRIVER=SQL Server;SERVER=HIGHNOTEWEBWATCHBOT;Database=WebWatchBot;UID=sa;PWD=*****
If client fails to connect, what is the client error messages? (please specify)
[Microsoft][ODBC SQL Server Driver]Communication link failure
Is the client remote or local to the SQL server machine? [Remote | Local]
Can you ping your server? [YES | NO ]
In cmd.exe console, type €œping -a <server_name>€?.
Can you telnet to your SQL Server? [YES | NO, please specify the error message ]
In cmd.exe console, type €œtelnet <server name> port, where port can be 135, 445 or sql_server_tcp_port. If your cmd.exe console turns into a complete black screen with a cursor flushing on top left corner, you are connected. Type ctrl+€™[€˜ to bring up telnet prompt and type €œquit€? <enter>.
What is your client database provider? [SNAC | MDAC | ADO.NET1.0 | ADO.NET2.0| other (please specify] Or/And, what is your client application? [SQL Management Studio | SQL Profiler | Visual Studio | Other (please specify): WebWatchBot - Website and Server Monitoring Software
Is your client computer in the same domain as the Server computer? (Same domain | Different domains | WorkGroup)
What protocol the client enabled? [Shared Memory | TCPIP | Named Pipes].
Do you have aliases configured that match the server name portion of your connection string? NO
Do you select force encryption on server and/or client? NO
[2] Server side:
What is the MS SQL version? [ SQL Server 2005 | SQL Sever 2005 ]
What is the SKU of MS SQL? [Enterprise | Standard | Workgroup | Express (or MSDE) | other (please specify)].
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1117.00 (xpsp_sp2_rtm.040803-2158)
Microsoft MSXML 2.6 3.0 4.0 5.0 6.0
Microsoft Internet Explorer 7.0.5730.11
Microsoft .NET Framework 2.0.50727.832
Operating System 5.1.2600
What is the SQL Server Protocol enabled? [Shared Memory | TCPIP | Named Pipes ]. Use SQL Server Configuration Manager to configure it and check ERRORLOG or event log to confirm.
Does the server start successfully? [YES | NO] If not what is the error messages in the SQL server ERRORLOG?
If SQL Server is a named instance, is the SQL browser enabled? [YES | NO]
What is the account that the SQL Server is running under?[Local System | Network Service | Domain Account]
Do you make firewall exception for your SQL server TCP port if you want connect remotely through TCP provider? [YES | NO | not applicable]
Do you make firewall exception for SQL Browser UDP port 1434? In SQL2000, you still need to make firewall exception for UDP port 1434 in order to support named instance.[YES | NO | not applicable ]
[2a] Tool Used to Connect
What tool or Application are you using to connect to SQL Server (eg: Visual Studio, SQL Server Management Studio, SQLCmd.exe, OSQL, etc) and especially the version of SQL Server (Express, Workgroup, Standard, Enterprise, Developer)
[3] Platform:
What is the OS version? [Windows XPSP2 | Windows 2003 | Windows 2000 | Windows 98 | others (please specify ) ].
Do you have third party antivirus, anti-spareware software installed? [Symantec | Norton | other (please specify)].
View 4 Replies
View Related
Dec 17, 2007
hi all,
i got the error, when i run my package after deploy into the server machine;
i can able to run that package in my local machine, if i deploy it to the server or some remote machine, its not running, and rises error messages, that says cant accquire connection from the connection manager;
the problem might be with the login name and password; i could not see any password in any of my config file, or connection manager while running the package.
how to resolve this problem?? please help me!
View 6 Replies
View Related
Jan 18, 2008
I have been trying to host my website on Go Daddy for about 3 weeks and I have cleared several problems but this one remains. I can get into the ASPNETDB database for doing logins , etc but I cant access my database called "PINEmgt".
To try to understand where the problem is located,I built a very simple application without login controls and put on it one Detailform accessing a single line table "Signin". I continually get the error message I got with my real app :"The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty. " There is only one connection string in my app -'PINEMgtConnectionString2'. When I run the app locally on my machine it works. After I move everything to Go Daddy, I get the error message and the following dump"
Line 24: </Fields>
Line 25: </aspetailsView>
Line 26: <aspqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStringsINEMgtConnectionString2 %>"
Line 27: InsertCommand="INSERT INTO Signup(first_name, last_name, email, customer_id) VALUES (,,,)"
Line 28: SelectCommand="SELECT * FROM [Signup]"></aspqlDataSource>
This is indeed the code from my single page app.
The dump is:
[InvalidOperationException: The connection name 'PINEMgtConnectionString2' was not found in the applications configuration or the connection string is empty.]
System.Web.Compilation.ConnectionStringsExpressionBuilder.GetConnectionString(String connectionStringName) +3039085
ASP.default_aspx.__BuildControlSqlDataSource1() in d:hostinguck7scoutDefault.aspx:26
ASP.default_aspx.__BuildControlform1() in d:hostinguck7scoutDefault.aspx:10
ASP.default_aspx.__BuildControlTree(default_aspx __ctrl) in d:hostinguck7scoutDefault.aspx:1
ASP.default_aspx.FrameworkInitialize() in d:hostinguck7scoutDefault.aspx.vb:912306
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +40
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.default_aspx.ProcessRequest(HttpContext context) +29
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +303
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
After Googleing, asking Go Daddy for info (which they dont give) , etc for three weeks, I need serious mental help
in the form of a solution of this problem. Your help with the problem or the name of a good mental health professional in eastern N.C. (maybe both) would be appreciated.
View 10 Replies
View Related
May 30, 2008
I have seen another thread with this same problem, but the problem seemed to be a typo. I am getting an error when I try to access the web site ..
The connection name 'USASH-AS0013' was not found in the applications configuration or the connection string is empty.
However, in my web.config file I do have a connection named USASH-AS0013. Here is my web.config file (with my user/pwd hidden). Any help would be greatly appreciated.
<?xml version="1.0"?>
<!--
Note: As an alternative to hand editing this file you can use the
web admin tool to configure settings for your application. Use
the Website->Asp.Net Configuration option in Visual Studio.
A full list of settings and comments can be found in
machine.config.comments usually located in
WindowsMicrosoft.NetFrameworkv2.xConfig
-->
<configuration>
<appSettings/>
<connectionStrings>
<add name="USASH-AS0013" connectionString="Provider=SQLOLEDB;Data Source=USASH-AS0013;User ID=****;Password=*****;Initial Catalog="Smart Factory""
providerName="System.Data.OleDb" />
</connectionStrings>
<system.web>
<!--
Set compilation debug="true" to insert debugging
symbols into the compiled page. Because this
affects performance, set this value to true only
during development.
Visual Basic options:
Set strict="true" to disallow all data type conversions
where data loss can occur.
Set explicit="true" to force declaration of all variables.
-->
<compilation debug="true" strict="false" explicit="true"/>
<pages theme="MySkin" >
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
<!--
The <authentication> section enables configuration
of the security authentication mode used by
ASP.NET to identify an incoming user.
-->
<authentication mode="Windows"/>
<!--
The <customErrors> section enables configuration
of what to do if/when an unhandled error occurs
during the execution of a request. Specifically,
it enables developers to configure html error pages
to be displayed in place of a error stack trace.
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>
-->
</system.web>
</configuration>
View 3 Replies
View Related
Feb 19, 2015
I have a child package where the ConnectionString property of a Connection Manager is set by a Parent Package Variable Configuration. I set up a script task that brings up a message box with the value of the ConnectionString property right before the dataflow task.
MessageBox.Show(Dts.Connections["CPU_*"].ConnectionString.ToString());When I run the parent package, the message box shows that the connection string is changing with every iteration, but in the dataflow it always draws the data from the same source.
The connection manager is an ADO.Net type, RetainSameConnection is set to False, and I've been researching this for days.
(Update 2/23/2015): To make this stranger, when I look at the diagnostic logs, they tell me that when the new connections are being opened they are using the new connection strings.
View 2 Replies
View Related
Aug 11, 2005
Dear members,I'am thinking about the "best" way to connect to my sql-server viaADO.Net (if there is a best way).My application uses the sql-server very intensively. At the momentevery database-operation opens a connection, executes and then closesthe connection.Another way would be to use only a single connection to the database,which is opened when the application starts.What do you think is the better way to get a high performing sqlserver: using one single application connection vs. using oneconnection for every operation?Cheers, Sebastian
View 2 Replies
View Related
Mar 30, 2007
Hello,
I've created a SSIS Solution and have created Data Sources. I have two packages. One was created before the Data Sources, and one was created after. The package that was created after is using connections from the Data Sources. I want to change the package before the Data Soruces were created to use them, but when I right click in the Connection Managers pane "New Connection From Data Source.." is not an option.
Did I not add it to the Solution properly?
How do I get it to show?
Did I not refresh something?
Please provide the how if you figure it out.
Thanks
View 4 Replies
View Related
Jul 26, 2006
How would one go about using an ODBC connection with SSIS. I'm trying to ETL some Sybase ASE data, but I get the error when I try it:
"cannot acquire a managed connection from the run-time connection manager"
This wasn't any help:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=169777&SiteID=1
View 1 Replies
View Related
Mar 29, 2007
Both the OLE DB Connection and ADO.Net Connection in SSIS Package does not remember password.
Im connecting to a SQL Server 2000 box using its sa password as test.
The SSIS package runs fine when you first set up the connection in bids
The bottom line is that SSIS keeps forgetting the password I feed into
the two Connections that I'm using. I double-click a connection,
type the password in, check "Save my password" and hit "OK" but the
password disappears from there whenever I run the package or
double-click the connection again.
is there any known workaround for this issue as I would like to schedule my SSIS package using a SSIS Step in a SQL Server 2005 Agent job.
the only thing I found when googling this error was link below but the workaround described here is a little harsh
http://www.developersdex.com/sql/message.asp?p=1921&ID=%3C1146409399.447345.7470@j73g2000cwa.googlegroups.com%3E
thanks in advance
Dave
the box SSIS is running on is Windows 2003 Server Standard Edition latest service pack
SQL Server 2005 (no service packs )
View 14 Replies
View Related
Jan 4, 2006
I came across something strange today. I was wondering I was doing something wrong.
View 7 Replies
View Related
