ColumnA
<Dcc::Applicable v="False"/><Dcc::DccData v="0"/><DESC v="DataReceived- 8769 datas, 9.20USD cash"/>
<Dcc::Applicable v="False"/><Dcc::DccData v="0"/><DESC v="DataReceived- 1000 datas, 14.40USD cash"/>
I have a list of data as above.How can i create another new column just to grab the data?
NewColumn
8769
1000
I want to grab some key value pairs from the text in sql column
e.g.
some text[Key1=Val1]some text[Key2=Val2][Key3=Val3]some text
I want a function which takes Keyname as input & returns the value related with it if found.
GetValueFmKey('Key1') should return Val1 and like on.
I have a list of data sample as below:
MYDATA
2/26/2014 19:35:0 2/26/2014 19:35:0 2/26/2014 22:25:0 UK AUS start end
3/1/2014 9:20:0 3/1/2014 9:20:0 3/1/2014 10:5:0 AUS UK start end
How can I only grab as below:
newColumn
UK AUS
AUS UK
Hello-
I have a chart I am producing in .net and I need to values. The problem is the values (sums) i need are on 2 different servers. Is there any where to combine the query using two databases? Does anyone have any suggestions?
thanks
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="ABC"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="KJHKH"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="POJ"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="AKJFISM"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="PM"/>
how can i only grab the arrival code?
newColumnArrivalCode
ABC
KJHKH
POJ
AKJFISM
'
'
'
'
Hi, I am very new to the .net framework, but I have a lot of experince in php/mysql applications. So this is this is proboly going to seem like a nwebie question.
I am trying to pull a single item out of the database programaticlly, take the value of that item and set it to a varible so I can work with it in other areas.
Here is basically what I have this is on the vb page in a sub I have the varible MonthlyPrice Defined earlier in the pageDim connString As String = _ConfigurationManager.ConnectionStrings("ConnectioString").ConnectionString'Create a SqlConnection instanceUsing myConnection As New SqlConnection(connString)'Specify the SQL queryConst sql As String = "SELECT Price FROM Plans Where PlainID='" & PlanId & "'"'Create a SqlCommand instanceDim myCommand As New SqlCommand(sql, myConnection)'Get back a DataSetDim myDataSet As New DataSet'Create a SqlDataAdapter instanceDim ReadData As New SqlDataReader(myCommand) 'Bind the DataSet to the GridViewMonthlyPrice = ReadData("Price")'Close the connectionmyConnection.Close()End Using
I just want to get the price of the plan where planID is equal to the value of my varible planID. I want to set that equal to MonthlyPrice which is a decimal so I can add it into some calculations and return a value. I don't really want to bind the data to anything but everytime I search google I can't find anything excpet for binding data to grideview and things like that.
I have tried several diffrent approaches that I have found out there but have gotten errors or and things I am not understanding.
I originally was trying to access a datasource I already have defined that is on the aspx page.<asp:SqlDataSource ID="SQLSelectPlan" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT * FROM [Plans] WHERE ([PlanID] = @PlanID2)">
<SelectParameters>
<asp:FormParameter FormField="grSelectPlan" Name="PlanID2" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
Is there a way for me to grab this datasource which works and is tied to a detailed view, take the value in the price collom and stick it in the MonthlyPrice varible on my vb page? That is the approach that seems the most logical to me.
If someone has better way I would really like to know.
Thanks
I have a problem....SOMEONE PLEASE HELP!
Here is the setup.
Text Box: User enters in customer transaction number
Button: User clicks button to display information about the customer
Now the database has a lot of unique customer numbers. What I am trying to do is take what the user enters so it can search the database and pull out that customers information. I am having a hard time getting that information from the textbox. Any suggestions! Here is what I have so far.
Private Sub btnViewFlow_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnViewFlow.Click
Try
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.SqlDataAdapter1 = New System.Data.SqlClient.SqlDataAdapter
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.DataSet11 = New links.DataSet1
CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).BeginInit()
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "workstation id=<14852>;packet size=4096;user id=<userID>;password=<Strong Password>;data source=ZRTPD0WB;p" & _
"ersist security info=False;initial catalog=DTR"
'
'SqlDataAdapter1
'
Me.SqlDataAdapter1.SelectCommand = Me.SqlSelectCommand1
Me.SqlDataAdapter1.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "DTR_Document_Summary", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("DocumentId", "DocumentId"), New System.Data.Common.DataColumnMapping("PartnerId", "PartnerId"), New System.Data.Common.DataColumnMapping("PartnerName", "PartnerName"), New System.Data.Common.DataColumnMapping("Direction", "Direction"), New System.Data.Common.DataColumnMapping("TranSet", "TranSet")})})
'
'SqlSelectCommand1
'
Me.SqlSelectCommand1.CommandText = "SELECT DocumentId, PartnerId, PartnerName, Direction, TranSet FROM DTR_Document_S" & _
"ummary "
'WHERE (DTR_Document_Summary.PartnerId = 'txtPartnerId.text.toString')"
'THE STATEMENT ABOVE DOESNT WORK
Me.SqlSelectCommand1.Connection = Me.SqlConnection1
'
'DataSet11
'
Me.DataSet11.DataSetName = "DataSet1"
Me.DataSet11.Locale = New System.Globalization.CultureInfo("en-US")
CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).EndInit()
'Open the connection
SqlConnection1.Open()
TextBox1.Text = "Connection Open"
'Populate DataSet11
SqlDataAdapter1.Fill(DataSet11)
TextBox1.Text = "DataSet11 has been filled!"
'Display Data
DataGrid1.DataBind()
TextBox1.Text = "Here is your requested information"
Catch ex As Exception
TextBox1.Text = ex.Message
End Try
'Close the connection
SqlConnection1.Close()
End Sub
I have two tables, one a data table, the other a product table. I want to perform a join on the two tables with values distributed into columns based on the value in the month field.
data_table
product_code month value
350 1 10
350 2 20
350 3 30
product_table
product_code profit_center
350 4520
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 20 30
My current query gives the following result
result_view
product_code profit_center mon1 mon2 mon3
350 4520 10 0 0
350 4520 0 20 0
350 4520 0 0 30
Any direction toward a solution would be appreciated. Am using SS2005.
Hi All.
I have a coulmn that contains data in the following format.
COUNTRY/SATE/UNAME
What I would like to do is create another column in the table stripping out the COUNTRY/ and /UNAME
Example
Existing column value
US/NY/BLAH
New Column value
NY
Hey everyone,
I have a view that shows the email address and first name of a Membership table. I need to add a column to this view that doesn't have a corresponding column in the original table that has some default value.
i.e. the view currently shows:
John john@something.com
I need it to say:
John john@something.com EmailBlast
The third column will always have that value.
Anyone have a suggestion?
Thanks in advance!
--J
Hi, in reference to the article:
http://aspnet.4guysfromrolla.com/articles/103002-1.2.aspx
I would like to know how to create a 'password' column where the data type is a binary type of length 16
This is my table:
CREATE TABLE Staff
(
Namevarchar (50)PRIMARYKEY,
Password ???? NOT NULL,
Role varchar (50)NOT NULL
)
Please review my code. Thanks in advance for helping me out here!
-Gabian-
Hi all!
I want to create a table. One of the columns should be in the data type MONEY with two digits on the right side of the decimal point.
How is that possible?
Thanks a lot and greetings from vienna
landau
l've the following situation,
l've some excel files controlled by Vendor which changing frequently. The only thing does not change is the header name of each column.
So my question is, is there any way to create a new table based on the excel file selected including the column name in SSIS? So that l can use the data reader as source to select those columns l am interested on and start the integration.
Thanks.
Regards,
Yong Boon, Lim
p/s : The excel header is at the row 7.
how can i only grab the last 4 ID:
data
19Jul hello ID UKAU
9Jul hello ID UJKO
7Jul hello ID POJP
I want to include the name of the user whom so ever has changed the record.
I want to insert the name of the user in the column.
How to grab the name of the user from the action...?
Thanks,
Harish
My DB saves it's data into a table at the end of each day like:
'e4_event_20140530' where the last bit changes according to the date. So 30th May 2014 in this case.
What I am trying to do is query the last 24 hours. I know i can grab from 2 tables and do a 'between' with times but it means having to change table name and times in the query every time i run it. I'd just like to run it and for it to just fetch the last 24 hours at any point in time.
My DB outputs time like '2014-05-30 08:54:23'
i have 2 tables right now, po and notes...
the notes table contain the note_id and notetext, so example of a row would be:
1 this is the note for the first row
2 this is the note for computer parts
etc..
the po table has item info, description, po_id, and note_id, heres an example:
po_id item desc note_id
1 215-33 computer parts 2
the problem is, is there a way where say i insert the note row into the notes table first and then get the note_id of that, so that i can then insert the row into the po table which includes the note_id from the notes table?
would i have to use two separate inserts or can i use one? i was going to just insert the notes row first, and then use a query using the LIKE() function on the note text to get the note_id, but some notes may be the same as others, so the note_id wouldn't be the correct one :( and i think just getting the last row of the notes table would be bad too incase someone happens to insert a row into that table at the same time
any ideas please?
thanks!
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
hello,
I'd like to know how I can grab the output of the following code and use it as variable:
declare @sql nvarchar(25)
set @sql = 'SELECT CURRENT_TIMESTAMP'
EXEC(@sql)
Thank you.
I have MSDE running on my system and I want to get a list of databasesfor that server programmatically. I'm using vb.net and I want to view,add, delete and modify databases on a server from within a class.I'm aware I can use the "Server Explorer" feature in Visual Studio, butthat isn't what I'm looking for. Any references or suggestions on whereto start are appreciated.TIARalf
View 7 Replies View Relatedwhen creating a new table. How can I set the default value of the column to equal the value of another column in the same table?
View 5 Replies View RelatedHow Can I Create Two Column with Math Function In one Column Like Below.
Create Table Tbl_V_Voucher_Details
(
Id Int IDentity (1,1) Primary Key,
Catid Int Foreign Key References Tbl_V_Voucher_Info(Id),
ItemId Int Foreign Key References Tbl_V_Item(Id),
Discription varchar
(100),
Qty Int,
Price Float,
Qty * Price As Total
)
I have the following table with two columns:
SEQ_NUM STATUS_CODE
101 D12
102 DWI - REGULAR DWW - EXPIRED
103 WRW - REG WRT - FUTURE
I would like to output the following:
SEQ_NUM STATUS_CODE
101 D12
102 DWI
102 DWW
103 WRW
103 WRT
The Status code column in the source table will have a single 3 DIGIT alphanumeric code, and sometimes a longer string. I need a code that will automatically grab the 3 digit code before the dash.
I have run into an issue that seems very simple but I am new to SSIS and DBs in general and therefore cannot solve it. I would like to take data from a SQL Server table, lookup a key from a dimension table and update the same SQL Server table with this data. Is there anyway to do an update using SSIS?
Thanks,
Curtis
I am trying to add a column to query based on the value of another column in the query.
I first tried creating a calculated field in SSRS 2008 with this statement:
=IIF(Fields!ChargeableFlag.Value=1,Fields!Negamt.Value,0)
The report runs but I get a "#ERROR" when I place the field on the report.
I next tried creating a new column with the SQL statement:
SELECT Project.ProjectCode AS PC, Project.StatusCode AS SC, Time.StandardHours AS Hours,
Time.StandardChargeAmt AS StdAmt, Time.TaskUID as UID,
Time.StandardChargeRate as Rate, ChargeableFlag, 'Bill' =
Case
When TaskRule.ChargeableFlag = 0 Then 'Non-Bill'
When TaskRule.ChargeableFlag = 1 Then 'Billable'
[Code] .....
This query, less the case statement for BLAmt creates the dataset for the SSRS. Adding the Case statement for the BLAmt produces the error: "Invalid column name 'Negamt'."
Can anyone assist me with a script that adds a new column to a table then inserts new values into the new column based on the Table below. i have included an explanation of what the script should do.
Column from
Parts Table Column from
MiniParts New Column in
(Table 1 ) (Table 2 ) MiniParts (Table2)
PartsNum
MiniPartsCL
NewMiniPartsCL
1
K
DK
1
K
K
1
Q
Q
0
L
L
0
L
LC
0
D
G
0
S
S
I have 2 tables in a database. Table 1 is Parts and Table 2 is MiniParts. I need a script that adds a new column in the MiniParts table. and then populate the new column (NewMinipartsCL) based on Values that exist in the PartsNum column in the Parts Table, and MiniPartsCL column in the MiniParts columns.
The new column is NewMiniPartsCL. The table above shows the values that the new column (NewMiniPartsCL) should contain.
For Example
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "DK" ( as shown in the table above).
Anytime you have "1" in the PartsNum column of the Parts Table and the MiniPartsCL column of the MiniParts Table has a "K" , the NewMiniPartsCL column in the MiniParts Table should be populated with "K" ( as shown in the table above). etc..
Hello all,
Please help....
I have a text file which needs to be created into a table (let's call it DataFile table). For now I'm just doing the manual DTS to import the txt into SQL server to create the table, which works. But here's my problem....
I need to extract data from DataFile table, here's my query:
select * from dbo.DataFile
where DF_SC_Case_Nbr not like '0000%';
Then I need to create a new table for the extracted data, let's call it ExtractedDataFile. But I don't know how to create a new table and insert the data I selected above into the new one.
Also, can the extraction and the creation of new table be done in just one stored procedure? or is there any other way of doing all this (including the importation of the text file)?
Any help would be highly appreciated.
Thanks in advance.
I need just the names of tables, views and sprocs within a SQL Serverdatabase. What's the easiest way to do this?
View 3 Replies View RelatedI have a table with Million plus records. Due to Running Totals article, I have been able to calculate the Trial_Balance for all months.
Now I am trying to provide a Beginning Balance for all months and the Logic is the Beginning Balance of July would be the Trial_Balance of June. I need to be able to do this for multiple account types. So the two datasets that need to be included in logic is actindx and Calendar_Month.
For actindx of 2 and Calendar_Month of 2014-01-01The Trial_Balance_Debit is 19585.46 This would make the Beginning_Balance of actindx 2 and Calendar_Month of 2014-02-01 19585.46
I am trying to do some type of self join, but not sure how to include each actindx number differently.
Table creation and data insert is below.
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[TrialBalance](
[Trial_Balance_ID] [int] IDENTITY(1,1) NOT NULL,
[Code] ....
Hi,
I am trying to create a inline function which is listed below.
USE [Northwind]
SET ANSI_NULLS ON
GO
CREATE FUNCTION newIdentity()
RETURNS TABLE
AS
RETURN
(SELECT ident_current('orders'))
GO
while executing this function in sql server 2005 my get this error
CREATE FUNCTION failed because a column name is not specified for column 1.
Pleae help me to fix this error
thanks
Purnima
For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
Hi
I have a table (sql server express),and i need to create a column. How can i do that?
Thank you
If I have a column like this
View 9 Replies View Related