Hello-
I have a chart I am producing in .net and I need to values. The problem is the values (sums) i need are on 2 different servers. Is there any where to combine the query using two databases? Does anyone have any suggestions?
thanks
I have MSDE running on my system and I want to get a list of databasesfor that server programmatically. I'm using vb.net and I want to view,add, delete and modify databases on a server from within a class.I'm aware I can use the "Server Explorer" feature in Visual Studio, butthat isn't what I'm looking for. Any references or suggestions on whereto start are appreciated.TIARalf
View 7 Replies View RelatedI have a list of data sample as below:
MYDATA
2/26/2014 19:35:0 2/26/2014 19:35:0 2/26/2014 22:25:0 UK AUS start end
3/1/2014 9:20:0 3/1/2014 9:20:0 3/1/2014 10:5:0 AUS UK start end
How can I only grab as below:
newColumn
UK AUS
AUS UK
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="ABC"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="KJHKH"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="POJ"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="AKJFISM"/>
<Hello currency 988 v=""/><hello::Value v="0"/><Arrival Code v="PM"/>
how can i only grab the arrival code?
newColumnArrivalCode
ABC
KJHKH
POJ
AKJFISM
'
'
'
'
Hi, I am very new to the .net framework, but I have a lot of experince in php/mysql applications. So this is this is proboly going to seem like a nwebie question.
I am trying to pull a single item out of the database programaticlly, take the value of that item and set it to a varible so I can work with it in other areas.
Here is basically what I have this is on the vb page in a sub I have the varible MonthlyPrice Defined earlier in the pageDim connString As String = _ConfigurationManager.ConnectionStrings("ConnectioString").ConnectionString'Create a SqlConnection instanceUsing myConnection As New SqlConnection(connString)'Specify the SQL queryConst sql As String = "SELECT Price FROM Plans Where PlainID='" & PlanId & "'"'Create a SqlCommand instanceDim myCommand As New SqlCommand(sql, myConnection)'Get back a DataSetDim myDataSet As New DataSet'Create a SqlDataAdapter instanceDim ReadData As New SqlDataReader(myCommand) 'Bind the DataSet to the GridViewMonthlyPrice = ReadData("Price")'Close the connectionmyConnection.Close()End Using
I just want to get the price of the plan where planID is equal to the value of my varible planID. I want to set that equal to MonthlyPrice which is a decimal so I can add it into some calculations and return a value. I don't really want to bind the data to anything but everytime I search google I can't find anything excpet for binding data to grideview and things like that.
I have tried several diffrent approaches that I have found out there but have gotten errors or and things I am not understanding.
I originally was trying to access a datasource I already have defined that is on the aspx page.<asp:SqlDataSource ID="SQLSelectPlan" runat="server"
ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT * FROM [Plans] WHERE ([PlanID] = @PlanID2)">
<SelectParameters>
<asp:FormParameter FormField="grSelectPlan" Name="PlanID2" Type="Int32" />
</SelectParameters>
</asp:SqlDataSource>
Is there a way for me to grab this datasource which works and is tied to a detailed view, take the value in the price collom and stick it in the MonthlyPrice varible on my vb page? That is the approach that seems the most logical to me.
If someone has better way I would really like to know.
Thanks
ColumnA
<Dcc::Applicable v="False"/><Dcc::DccData v="0"/><DESC v="DataReceived- 8769 datas, 9.20USD cash"/>
<Dcc::Applicable v="False"/><Dcc::DccData v="0"/><DESC v="DataReceived- 1000 datas, 14.40USD cash"/>
I have a list of data as above.How can i create another new column just to grab the data?
NewColumn
8769
1000
I have a problem....SOMEONE PLEASE HELP!
Here is the setup.
Text Box: User enters in customer transaction number
Button: User clicks button to display information about the customer
Now the database has a lot of unique customer numbers. What I am trying to do is take what the user enters so it can search the database and pull out that customers information. I am having a hard time getting that information from the textbox. Any suggestions! Here is what I have so far.
Private Sub btnViewFlow_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnViewFlow.Click
Try
Me.SqlConnection1 = New System.Data.SqlClient.SqlConnection
Me.SqlDataAdapter1 = New System.Data.SqlClient.SqlDataAdapter
Me.SqlSelectCommand1 = New System.Data.SqlClient.SqlCommand
Me.DataSet11 = New links.DataSet1
CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).BeginInit()
'
'SqlConnection1
'
Me.SqlConnection1.ConnectionString = "workstation id=<14852>;packet size=4096;user id=<userID>;password=<Strong Password>;data source=ZRTPD0WB;p" & _
"ersist security info=False;initial catalog=DTR"
'
'SqlDataAdapter1
'
Me.SqlDataAdapter1.SelectCommand = Me.SqlSelectCommand1
Me.SqlDataAdapter1.TableMappings.AddRange(New System.Data.Common.DataTableMapping() {New System.Data.Common.DataTableMapping("Table", "DTR_Document_Summary", New System.Data.Common.DataColumnMapping() {New System.Data.Common.DataColumnMapping("DocumentId", "DocumentId"), New System.Data.Common.DataColumnMapping("PartnerId", "PartnerId"), New System.Data.Common.DataColumnMapping("PartnerName", "PartnerName"), New System.Data.Common.DataColumnMapping("Direction", "Direction"), New System.Data.Common.DataColumnMapping("TranSet", "TranSet")})})
'
'SqlSelectCommand1
'
Me.SqlSelectCommand1.CommandText = "SELECT DocumentId, PartnerId, PartnerName, Direction, TranSet FROM DTR_Document_S" & _
"ummary "
'WHERE (DTR_Document_Summary.PartnerId = 'txtPartnerId.text.toString')"
'THE STATEMENT ABOVE DOESNT WORK
Me.SqlSelectCommand1.Connection = Me.SqlConnection1
'
'DataSet11
'
Me.DataSet11.DataSetName = "DataSet1"
Me.DataSet11.Locale = New System.Globalization.CultureInfo("en-US")
CType(Me.DataSet11, System.ComponentModel.ISupportInitialize).EndInit()
'Open the connection
SqlConnection1.Open()
TextBox1.Text = "Connection Open"
'Populate DataSet11
SqlDataAdapter1.Fill(DataSet11)
TextBox1.Text = "DataSet11 has been filled!"
'Display Data
DataGrid1.DataBind()
TextBox1.Text = "Here is your requested information"
Catch ex As Exception
TextBox1.Text = ex.Message
End Try
'Close the connection
SqlConnection1.Close()
End Sub
how can i only grab the last 4 ID:
data
19Jul hello ID UKAU
9Jul hello ID UJKO
7Jul hello ID POJP
I want to include the name of the user whom so ever has changed the record.
I want to insert the name of the user in the column.
How to grab the name of the user from the action...?
Thanks,
Harish
My DB saves it's data into a table at the end of each day like:
'e4_event_20140530' where the last bit changes according to the date. So 30th May 2014 in this case.
What I am trying to do is query the last 24 hours. I know i can grab from 2 tables and do a 'between' with times but it means having to change table name and times in the query every time i run it. I'd just like to run it and for it to just fetch the last 24 hours at any point in time.
My DB outputs time like '2014-05-30 08:54:23'
i have 2 tables right now, po and notes...
the notes table contain the note_id and notetext, so example of a row would be:
1 this is the note for the first row
2 this is the note for computer parts
etc..
the po table has item info, description, po_id, and note_id, heres an example:
po_id item desc note_id
1 215-33 computer parts 2
the problem is, is there a way where say i insert the note row into the notes table first and then get the note_id of that, so that i can then insert the row into the po table which includes the note_id from the notes table?
would i have to use two separate inserts or can i use one? i was going to just insert the notes row first, and then use a query using the LIKE() function on the note text to get the note_id, but some notes may be the same as others, so the note_id wouldn't be the correct one :( and i think just getting the last row of the notes table would be bad too incase someone happens to insert a row into that table at the same time
any ideas please?
thanks!
Is there a handy-dandy way for me to be able, from a stored procedure, to capture the notification email address for a user associated with a job?
I need to send an email out from a stored procedure, and I want it to be set up to send to the same user that is set up in the job that calls the stored procedure.
the same notification stored proc will be used in multiple jobs, but the jobs are already set up with a notification email to be sent to the defined users "on completion" (error or not). I want a separate email to be sent, but I want to use xp_Sendmail because I have to perform a select who's output I want to appear in the body of the email (and unless I am missing something, I have no control over the body of the standard "job completion" email).
I would prefer to NOT have to "hard code" the user email address in the stored proc that calls xp_sendmail, OR to put it in some user table in the database, when the user I want to send it to will always be the same one defined in at the JOB level in Enterprise Manager.
Any thoughts? Thanks in advance for your instantaneous and informative answer-packed responses! ;)
hello,
I'd like to know how I can grab the output of the following code and use it as variable:
declare @sql nvarchar(25)
set @sql = 'SELECT CURRENT_TIMESTAMP'
EXEC(@sql)
Thank you.
I have the following table with two columns:
SEQ_NUM STATUS_CODE
101 D12
102 DWI - REGULAR DWW - EXPIRED
103 WRW - REG WRT - FUTURE
I would like to output the following:
SEQ_NUM STATUS_CODE
101 D12
102 DWI
102 DWW
103 WRW
103 WRT
The Status code column in the source table will have a single 3 DIGIT alphanumeric code, and sometimes a longer string. I need a code that will automatically grab the 3 digit code before the dash.
I want to grab some key value pairs from the text in sql column
e.g.
some text[Key1=Val1]some text[Key2=Val2][Key3=Val3]some text
I want a function which takes Keyname as input & returns the value related with it if found.
GetValueFmKey('Key1') should return Val1 and like on.
I have run into an issue that seems very simple but I am new to SSIS and DBs in general and therefore cannot solve it. I would like to take data from a SQL Server table, lookup a key from a dimension table and update the same SQL Server table with this data. Is there anyway to do an update using SSIS?
Thanks,
Curtis
I need just the names of tables, views and sprocs within a SQL Serverdatabase. What's the easiest way to do this?
View 3 Replies View Related
I'm in the middle of developing a Database for a hospital that measures its audits, inhouse operations, and finance. What we currently have and do everyday is collect data from a large database that is real time with patient data, progess, infomation, etc and dump it into a data warehouse that runs on TSI/Eclipsys. We run reports using a number of programs and dump it into Excel sheets that have charts, reports, etc. This Database for which I'm developing won't come soley from the TSI/Eclypsys source, but this is the only source thats updated regularly. I don't want to have in sync with TSI/Eclipysys in fear that every day when it updates data may be lost, not read, or worse won't be up date if there is a problem. My question is is it possible to run a query from Sequel Server 2005 that will take that data upon request using the reporing features on Sequel Server 2005. i.e. What if I need to run a report on measure B in department 12 from Jan 1-Feb 1, instead of being in sync, can I just write queries to take that information rather than double the data and take up twice the space and trouble. FYI, these datatypes rarely change in the TSI/Eclipsys data warehouse. This sure was long question and didn't intended it to be . Thanks for listening and hope to hear back.
Stephen
Hi All,
We currently got two databases in the application(Visual web express with vb script). The one database is a sql 2000 that sits on a server and is fed by people that does E Learning. The app. got its own database(SQL 2005 express) with the record of the people doing the learning and some other attendances from other courses. I would like to determine attendances from both databases etc. How do I link this to table form diffrent databases into one table for me to do training cost etc.
Thanks for your help.
hi, I currently uses SQL Server 2005.I need to move the data to my website, how do I do that? I have the SQL Server Management Studio Express but I couldn't not get it to export the data in .sql file (which is needed to import to my website's SQL database).Please let me know of any tools I need to perform the task. thanks.
View 3 Replies View RelatedHi,
I develop ASP.NET applications and use MS SQL 2000 Enterprise.
Each customer has one database and one custom design application. And, there is a gateway and a central database to get data from all databases.
Supposed there are 10 DBs. I want the data in those 10 databases updating to the central database directly.
So, the gateway can gather all data of 10 DBs from a central DB.
Now, my question is how should I do it in MS SQL 2000? Can I do it with a stored procedure (SP)? If so, how does the SP like?
Or, SP can only perform on it's own DB, but not execute across DBs? If so, how can I do that?
Thanks for advice
I have a web app that has been regulated to a disconnected PC. It's runing IIS and 2.0 with sql server express, but no connectivity. I have changes that are made to some of the data in the db (data, bot schema). There is one particular table that I cannot overwrite, and must extract the data.
What methods are available to do this swap of data between databases? I was thinking of doing something like this:
Track last date that remote db was updated. Upload updated database into data directory, loop through records for all affected tables, any date that was past logged date then update the record if it exists or insert new record, and then loop through the remote db and delete this records that dont exist in the updated db.
This seems intensive and slow - especially as the tables get bigger but I can't think of another solution that can be done by a user using sometime of web interface.
Dear all,
I faced a problem. I found all data/records of tables in a few databases were missing yesterday. I don't know what had happened. Can anyone tell me why? Can anyone tell me how to trace the root of the problem. Any log files I can trace? I fear it will happen again. My server is sql2000 and run on win server 2000.
Regards,
Simon
Hi, I would like to know if it is possible to compare data in two different databases (both SQL7.0),
with same exact schema. If possible, how could we do it?
Thanks
- Sharma
Hi
Is there a way of comparing the data contained in two separate databases (on the same server)?
I have two databases: DevDB and DB and all I want to verify is that the data in both are *exactly* the same.
Is there a nifty function to do this in SQL Server?
Thanks
Sara
If I have to copy data from one database to a temporary database on the same server, which transaction log will be written to as a result? Will it be the DB that the command is run from, the source DB, or possibly tempdb's log?
Thanks
Derek
I am trying to copy information from one Database to another. Each of the databases reside on a different server.
My question is
1. How can I use the DSN name in a stored procedure?
2. Do I need to use dynamic SQL?
3. Any other ideas of how to implement this?
Thanks
Thanks in advance for your help,
Is there an easy way to "link" data from one SQL database to another, preferably within a view?
More specifically, can one "link" to data from 2 seperate databases to a 3rd without importing the data?
Thanks,
Lee
i have two databases one has
firstname, lastname
and the othere
firstname, lastname, emailaddress
how do i get to merge the data from emailaddress to the 1st datbase?
Melvin Felicien
IT Manager
DCG Properties Limited
Hi All,
I wish to copy between 2 tables in different databases.
( The source and destiantion tables already exist)
The source table has duplicate entries which i want to avoid from being copied to destination table.
How can i achieve this?
Thanks in advance..!!
Vishu
Hi I'm trying to select data from different databases, Actually databases have the same structure and tables but different data, so I want to mix data from specific tables of all databases.
Any help would be great
I have two databases DB1 and DB2
With Tables T11,T12 and T21, T22 respectively.
All the tables in the two databases have the same structure.
I need help on a script to clear the contents of Table T21 and T22 in the DB2 database
And load the contents of Table T11 and T12 ( Table have about 2 Million records of data ) into T21 and T22.
hi,
1. I am new to SSRS. I want to show the data from two different databases in a single report. That databases may be in different machines also. Can you please suggest me how to do.
2. How to use the configurable connection string in reports. bcoz i'll have reporting service in one machine and database in another machine. At the time i want to read from config file. If database changing mean i need to reconfigure connection string. how to do.
Thanks.