I don't quite understand what I am asking for so hopefully this is enough to get an answer or some explanation.
Using SQL2014 I need to use a Chinese collation. I have been told that even with a Chinese collation Latin characters are there. Is there a Chinese collation that will provide Latin case-insensitive behavior?
We should support multiple language(Latin,chinese,japanese,korea) in one report when exporting to PDF format in reporting service. We have used Arial Unicode as our font. But when we exported the report, the korean language item can not be displayed. Any idea on that? Thanks a lot.
View 3 Replies View RelatedCan I specify a collate value for a column in a table that includes all the possible languages in the world or atleast Latin 1 and Eastern European languages.
My DB Collation is set to Latin 1 and the columns in the tables are all nvarchar or ntext, but certain hungarian characters are not displayed correctly.
What do all these collation codes represent:
SQL_EBCDIC037_CP1_CS_AS
211
SQL_EBCDIC273_CP1_CS_AS
212
SQL_EBCDIC277_CP1_CS_AS
213
SQL_EBCDIC278_CP1_CS_AS
214
SQL_EBCDIC280_CP1_CS_AS
215
SQL_EBCDIC284_CP1_CS_AS
216
SQL_EBCDIC285_CP1_CS_AS
217
SQL_EBCDIC297_CP1_CS_AS
They seem generic. Is there one collation that includes all the Eastern Europen Languages and Latin 1 charset. Please let me know.
Thanks,
Manisha
hi
we get ASCII data inserted into a SQL Server database by ODBC connection from an old UNIX system.
Example: INSERT INTO test.db VALUES ('123abc', '456П О')
All characters > 128 are converted to "?" automatically.
We tried to setup the database to the appropriate codepage, but we allways get "?" inserted.
How can I change my T-SQL text editor from text sensitive to text insensitive?
View 2 Replies View RelatedCan someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
thanks in advance.
Hi, i have a query that goes like this
select *
from Users
where UserName Like =@Username;
the values for 'UserName' go like this
Adrin
Jess
Fernndez
Gero
all of them have spanish accents. is there a way to make the "like" value to ignore the spanish characters? (, , , , , , etc)
That is because the user will not always write "Jess" they will write "Jesus" or they will not write "Adrin" they will write "Adrian"
so is there any way to tell the SQL Server engine to ignore those characters?
thanks!!!
We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????
View 4 Replies View RelatedI am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?
Jacob
I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI. Will there be any problems with this scenario? Thanks in advance!
View 2 Replies View RelatedMy application supports multiple languages/locales in a single database. Some of our new customers want to support Chinese, Japanese, Korean, Italian, Spanish, and German in addition to English. Supporting the Latin based languages is not a problem. But I am having trouble finding a collation sequence that allows me to store the other double byte languages in the same database correctly.
I have found changing the data types from text, char, varchar to ntext, nchar, nvarchar and adding an N in front of the various strings that getting inserted seems to work:
insert into CONTENTDATA (recordid, xml)
values (newid(), N'<CHANNEL1><FILE1/><TEXT1><![CDATA[和红魔拉拉队的动感精神
]]></TEXT1><TEXT3><![CDATA[和红魔拉拉队的动感精神]]></TEXT3></CHANNEL1>');
But this is not going to be a practical solution for us. Is there a collation sequence that would allow us to store multiple locales like we do in Oracle (AL32UTF8)?
Thanks in advance
Dov Rosenberg
How do I have to setup my SQL Server in order to be able to introduce (save) Chinese Characters additionally?
View 1 Replies View RelatedI have a column (ntext) and set collation to be Chinese-PRC, when I say Order By colName, how the column is sorted.
View 8 Replies View RelatedHi All
I have to develop a website which allows users to enter their comments into Chinese languages. I need sql2000 to support the chinese characters.
I am experienced .net web programmer, but have very little knowledge on the database side. Would really appreciate any help on this
THanks
Jignesh
Hi
I need some help importing Chinese characters into my SQL Server 2005 database.
I have the data in an access database, which contains a mixture of english and chinese characters.
Now when I import this into SQL, the Chinese characters are not imported in correctly.
I'm aware of that these characters may need to be imported as unicode, but I don't have an option to change this when importing from the Access table.
Please can somebody assist.
many thanks!
Is it possible to change this option once SQL Server has been installed or is it only available to be set when installing ?
thanks
Sqlserver is case insensitive in this way ?for example:select....where col1 like '%BURG%'will return 'Burger King' ???!!!
View 9 Replies View RelatedYesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?
View 2 Replies View RelatedSQL 2000, latest SP. We currently have the need to store data from aUTF-8 application in multiple languages in a single database.Our findings thus far support the fact that single-byte anddouble-byte characters can be held in the same DB without issue.However, when holding two sets of DIFFERING double-byte characters(i.e. Chinese and Japanese) there are issues.Since Japanese has a superset of both Kanji and Katakana charactersit's our theory that the Japanese collations will hold Chinese as well(Mandarin).1) Has anybody tried to store multiple languages in the same db? Whatcollation was used?2) Is it possible to change collation by table?3) Which collation of Japanese should be used for best multibyte,UTF-8 character sets? Currently we're testing with Japanese_CI_AS(encoding MS932).Any and all responses appreciated,Join Bytes!
View 1 Replies View RelatedAfter all the pain I've been going through with code pages and collation, I was asked how, when sql server does it's joins and predicate searches, how does it actual (internals now) know the an "A" = "a" in an insensitive search?
I didn't have the answer.
Damn, Now I really have to pick up Kelans book.
Is there an easy way to get the Lookup component to ignore case?
View 1 Replies View Relatedset MS SQL 2000 case-insensitive
View 1 Replies View RelatedI need a small confirmation regarding storing the Chinese and Japanese characters in sql server. Can we store Chinese and Japanese characters on a same database with Chinese Collation? Or else we need to store it separately with respective collations.
I tried to store both characters on db with Chinese collation it works but I am not so sure if it is right way to do so. Please confirm on this as we are doing research stage to build website in Chinese and japanese.
Thanks in advance.
Is there a way to change the font that the data viewer uses, so that the Chinese characters don't appear as boxes?
The data viewer displays Chinese characters as boxes, something similar to [_], at least on a computer with the following regional settings.
get-wmiobject CIM_OperatingSystem | ft OSLanguage, CodeSet, Locale
OSLanguage CodeSet Locale
---------- ------- ------
1033 1252 0409The data itself is flowing correctly into the target database with a pipeline data_type of DT_WSTR. The ideograms can be seen by query utilities which supports a unicode font (e.g. Management Studio).
Hi,
We have stored some chinese characters in SQL database with datatype as nvarchar, but they are displayed in RS as some weird characters.
like this: èå èçŽèèå å(è)åååçåˆ åå
When we code the asp pages, we put the following on each page to display the chinese characters properly.
<meta http-equiv="CONTENT-TYPE" content="TEXT/HTML; CHARSET=UTF-8">
So my question is what do I need to do in RS in order to show the chinese characters properly as well ?
Many thanks!
I have a table in MSSQL 2005 Express that stores user data. I would like to maintain the cases of user names, but I need to insure that they are not duplicated using different cases. Is there a way that I can create a constraint to enforce this?
Thanks,
WBuik
We have an in-house set of databases created by a member of staff who left the organisation in circumstances that mean he will not respond to queries relating to his work here. The programs he produced whilst in our employ are compiled and we have no access to the code, or the tools that he used (don't ask).
The programs allow the user to limit views based on various fields, but not the most useful field, a "memo" type field containing a textual description of work requests.
I only have Delphi 7 to use for the program development and have been using ADO, but my problem is I need to perform a case-insensitive search of a varchar(max) column based on text entered by user, but have been unsuccessful using LIKE and UPPER (which it appears you cannot use with a varchar).
Can anyone provide suggestions for what I am sure is a rather mundane and easy task for all of you.
Please note that I have only the Delphi, and no direct access to the SQL management tools.
Many thanks
Rob
Hi:
When I import data from multiple excel files, the Excel source gives validation errors if the case of a column name changes.
How can I make my excel source Case Insensitive?
TIA
Kar
Hello Experts,
I tried to retreive an input column using GetVirtualInputColumnByName, to map it with output, it gave error. I found that it is because the value passed bstrName parameter was in different case. say for example in the column it is "ColNo1" where as in the GetVirtualInputColumnByName i used "Colno1".
Can anyone tell, Is there anyway to find the column in a case in-sensitive way?
Thanks.
I have a table-valued function in mssql 2005 as below:
ALTER FUNCTION fn_test{ @test nvarchar(1000)}RETURNS@TEMP TABLE{ test nvarchar(1000)}ASBEGIN INSERT INTO @TEMP SELECT @test
RETURNEND
Everytime, I passed in chinese character (@test), such as 測驗, the function will return ????. What should I do for the table-valued function, so that the chinese character can be passed in? Please help.
Note: I can search and get the chinese characters if I use stored procedures; and the columns in the tables can store chinese chararcters as well. Only table-valued function is not working with the chinese characters. Is it a bug from MSSQL 2005?
If I make a search for instance
"Candy" in where statement I retrieve 12 hits however if I write "candy" I retrieve 0 hits.
Is it possible to make the database or table to be case insensitive?
Does anyone know how to how to performance case-insensitive search onXML data type in SQLServer 2005? Or I have to convert all the xml datato lower case before I store it?Thanks in advance.John
View 2 Replies View RelatedI am using SQL Server 2008. In ServerProperty function, there are two properties called “Collation” and “CollationID”. In some cases, I will only know the CollationID. Is it possible get the collation name from the CollationID? Is there a function called CollationNameFromID?
View 2 Replies View Related