DB Engine :: DBCC Check DB Failed

Jun 9, 2015

Recently one of our DB went to suspect mode, we have resolved it(repair_allow_dataloss) and DB came online but when we fire CheckDB on that it is throwing following error

Msg 7985, Level 16, State 2, Line 2
System table pre-checks: Object ID 3. Could not read and latch page (1:355) with latch type SH. Check statement terminated due to unrepairable error.
DBCC results for 'xxxxxxx'.
Msg 5233, Level 16, State 98, Line 2
Table error: alloc unit ID 196608, page (1:355). The test (IS_OFF (BUF_IOERR, pBUF->bstat)) failed. The values are 12716041 and -4.
CHECKDB found 0 allocation errors and 1 consistency errors not associated with any single object.
CHECKDB found 0 allocation errors and 1 consistency errors in database 'xxxxxxx'.

And error log is also continuously popping the below message

Error:

824,
Severity: 24,
State: 2.
SQL
Server detected a logical consistency-based
I/O

[code]....

View 7 Replies


ADVERTISEMENT

Dbcc Check

Aug 17, 2004

When i have to abort the DBCC CHECK because of too long runtime, is it making a full rollback ?
I did it and it stopped immediately.

dajm

View 1 Replies View Related

Maitenace Plan Check Database Integrity Task Fails With Failed:(0) Alter Failed For Server 'xyz'

Feb 21, 2008



Hi,



I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042.
I have a common maintenance plan that runs on each of the servers. The maintenance plan runs
fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:


Check Database integrity on Local server connection
Databases: <list of databases>
Include indexes
Task start: 2008-02-21T00:05:42.
Task end: 2008-02-21T00:05:46.
Failed0) Alter failed for Server €˜XYZ€™

I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time.
If I run the DBCC manually against the databases they all report fine.


I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.

Does anyone know what the problem could be?

View 23 Replies View Related

Check Fragmentation Without DBCC

Nov 21, 2007

Hi All,
I want to check the fragmentation for a table. But I do not have permissions to run DBCC commands on that server. Do we have any other method to identify the health of the table?

Thanks a lot.

Mannu.

View 4 Replies View Related

SQL 2012 :: DBCC CHECK DB Outcome - DB Refresh

Oct 22, 2015

I created sql job using maintenance plan to run DBCC Checkdb for all databases. But I didn't choose the option Ignore databases where the state is not online. If any db is restoring the same time as DBCC Check db job running, is check db job fails?

View 1 Replies View Related

DB Engine :: DBCC Error In Full Text Internal Table?

Jul 23, 2015

I have a database that has had a full text index at some point in it's history - but no longer does. The database is currently at SQL 2012 compatibility, but it was created on SQL2000. It still appears to have a row in the internal table sys.sysftinds - but some of the column values are NULL, and NULLs are not allowed. The database fails DBCC checks because of this.

Msg 8970, Level 16, State 1, Line 2
Row error: Object ID 25, index ID 1, partition ID xxxx, 
alloc unit ID xxxx (type In-row data), 
page ID (1:xxxx), row ID 0. Column 'sensitivity' was created NOT NULL, but is NULL in the row.
DBCC results for 'sys.sysftinds'.

There are 1 rows in 1 pages for object "sys.sysftinds".

CHECKTABLE found 0 allocation errors and 1 consistency errors in table 'sys.sysftinds' (object ID 25).

repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKTABLE (xxxx.sys.sysftinds).

DBCC execution completed. If DBCC printed error messages, contact your system administrator.

Running DBCC with repair_allow_data_loss has not worked.

View 6 Replies View Related

Database Fails Dbcc Check Db With Multiple Errors

May 1, 2014

I am not a DBA but have responsibility for a particular MSSQL 2008 R2 file server running a particular application.how to solve a database consistency check problem.The database fails dbcc checkdb with multiple 8903 errors. Unfortunately this was not discovered until well after any good backups were deleted. The good news is that the DB otherwise seems fine. We have experienced zero problems with the DB or the applications. Running the checkdb with the "repair_allow_data_loss" option does not fix the problem.

However, I would still like to fix the problem. Using a popular SQL recovery product I am able to recover the database.The original, vendor designed and supplied DB, has 2 file groups, and three files (MDF, NDF, LDF). The output of the recovery process produces 1 file group and 2 files (MDF and LDF). Vendor says they cannot support me since the recovered DB is 'non-standard' according to their design.

I am able to set up a new, blank version of the vendors database on another dev system with the proper file and filegroup structure. How can I get the data moved/copied from the recovered (MDF/LDF) database into the dev database (MDF, NDF, LDF). I've tried the import/export function but it fails (I can rerun and give details if necessary).

View 1 Replies View Related

Failed DBCC

Mar 11, 1999

When I run a DBCC checks (prior to backup) on one of my databases I receive the following error:

DBCC execution completed. If DBCC printed error messages, see your system Administrator. (Message 2528)

I cannot find any errors though. I checked the errorlog and NT error logs. Can somebody shed some light on the situation.

Fernando

View 1 Replies View Related

Dbcc Failed

Jul 19, 2000

Pls what is the syntax to fix this

There was a problem running the DBCC.

SQL Server returned the following error message:

Table Corrupt: Object ID 213575799, index ID 2, page (1:951), row 68. Test (ColumnOffsets <= (nextRec - pRec)) failed. Values are 21 and 0.

View 1 Replies View Related

HELP. DBCC Failed.

Jun 26, 2006

Hi all,
I have a problem and can't find a solution.
About a week ago, my maintenance program started failing do to a problem with one database it seems.
I look at my log and I see this error:
CrystalDB [SQLSTATE 01000]
Msg 1934, Sev 16: DBCC failed because the following SET options have incorrect settings: 'ANSI_NULLS., QUOTED_IDENTIFIER, ARITHABORT'. [SQLSTATE 42000]

What does it mean and how can I fix it?

View 3 Replies View Related

DB Engine :: Check If DB Is Primary In Log Shipping

Aug 28, 2015

I have a server that has several DBs .. some are log shipping(ls_) and others are not. The current TRAN backup script just does a:

select name from sys.databases
where name !=  'ls_xxxx'
and name != 'ls_yyyyy'

Is there a way to check a status byte or something so I can remove the hard coded names?

select name from sys.sysdatabase
where status   =  'I log ship'  -- ;)

I checked several places, but found nothing. Finding other status like RECOVERING et al ... is easy

View 2 Replies View Related

Dbcc Dbreindex Failed

Feb 5, 2001

when i run the dbcc dbreindex command it failed and message like this

[Microsoft][ODBC SQL Server Driver][Named Pipes]ConnectionCheckForData (PeekNamedPipe()).
[Microsoft][ODBC SQL Server Driver][Named Pipes]Connection broken.

Connection Broken
please help

View 3 Replies View Related

DB Engine :: DMV To Check Buffer Hit Ratio On Several Servers

Oct 30, 2015

I'm collecting performance data via DMV to check the buffer hit ratio on several servers. Sometimes I get values high above 100% hit Ratio.

Example (50050%):

SQLServer:Buffer Manager:Buffer cache hit ratio 2002
SQLServer:Buffer Manager:Buffer cache hit ratio base 4

View 11 Replies View Related

DBCC And Failed Assertion Errors - HELP!

Jul 20, 2005

Hey all -We are running SQL 2000 with ALL available service packs, etc.applied. We just built a brand new database server, which has dual2Ghz XEONs, 2GB memory, and the following disk configuration:RAID 1 array (2 disks) Operating System Windows Server 2003RAID 1 array (2 disks) Database LogsRAID 10 array (4 disks) Database DataDisks are SATA, with a 3Ware hardware RAID controller. The machineSCREAMS.We run 5 databases on this machine. 2 of these are fairly large (byour standards, anyway). The second largest database (and the busiestand most important) is consistently generating consistency errors thatbring many important queries down. These are almost ALWAYS in theform of index corruption on one single table. The corruption does notnormally occur on other tables, although it DOES happen once in awhile - rarely - on one of the other tables), nor does it EVER occuron any other databases on the server.The corruption seems to happen right in the neighborhood of midnightALMOST every day, give or take a few minutes, but does not seemdirectly associated with any of our MANY scheduled database cleanuptasks (believe me, we've tried desperately to find an associationusing SQL profiler). At midnight, our database traffic is fairly low,so it does not seem associated with a high traffic level.We are using the FULL recovery model, with log backups every 15minutes, and full backups daily at 12:15am. However, the corruptionhappens consistently BEFORE 12:15, like between 11:50pm and 12:10am.The most frustrating thing is, the database can go WEEKS without anycorruption at all, and then it'll go 4 or 5 days in a row with thisstrange corruption stuff.************************************************** ***********************Typical query errors when the corruption exists include:************************************************** ***********************SQL Server Assertion: File:<p:sqltdbmsstorengdrsinclude
ecord.inl>, line=1447Failed Assertion = 'm_SizeRec > 0 && m_SizeRec <= MAXDATAROW'.SQL Server Assertion: File: <recbase.cpp>, line=1378Failed Assertion = 'm_offBeginVar < m_SizeRec'.Server: Msg 3624, Level 20, State 1, Line 7Location: recbase.cpp:1374Expression: m_nVars > 0Connection Broken************************************************** ***********************Most of the responses to this type of issue (failed assertions) on thenewgroups appear to point to hardware failures. However, this isbrand new hardware, AND, it seems to us that if this was a hardwareissue, other databases, tables, and indexes would be affectedrandomly. Isn't that a valid assumption (that if it was hardware,particularly the RAID controller, the corruption would not be in sucha predictable place)? What if we moved the physical database files toanother location on the disk? Would/could that help?If anyone could offer some suggestions as to what may be causing thiscorruption, we would be eternally grateful. It is getting to be areal pain in the A*** to run DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSSevery day or two (it always seems to solve the problem without dataloss, but still...).Again, thanks in advance for your response.Sincerely,Morgan LeppinkJoin Bytes!

View 4 Replies View Related

DB Engine :: Check Last Database Index Reorg Date And Time?

May 4, 2015

Are there anyway I can check my last database reorg date and time using Tsql ?

View 5 Replies View Related

DB Engine :: How To Check Names Of Running Instances Without Connecting To Server

Jul 3, 2015

When i have multiple sql server instances running on one server, how to check the names of that instances with out connecting to sql server management studio.

View 12 Replies View Related

DBCC CHECKDB FAILED On SQL2k5x64 Activepassive Cluster

Jun 8, 2007

When using an activepassive sqlserver 2005 cluster (standard edition) on MS Server 2003 R2 Enterprise x64 with SP2 and I run the DBCC CHECKDB commands on any of the system databases I receive this error:



Check Database Integrity (selio)
Check Database integrity on Target server connection
Databases: All system databases
Include indexes
Task start: 2007-06-06T16:50:38.
Task end: 2007-06-06T16:50:38.
Failed-1073548784) Executing the query "DBCC CHECKDB WITH NO_INFOMSGS
" failed with the following error: "The database could not be exclusively locked to perform the operation.
Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Command:USE [master]
GO
DBCC CHECKDB WITH NO_INFOMSGS
GO
USE [model]
GO
DBCC CHECKDB WITH NO_INFOMSGS
GO
USE [msdb]
GO
DBCC CHECKDB WITH NO_INFOMSGS

I don't receive this error when I run CHECKDB on the system databases on our test environment x64 box (same OS and hardware).





View 3 Replies View Related

SQL Server 2008 :: Package Execution Failed DBCC CheckDB

Sep 8, 2015

I have an issue with DBCC Check DB maintenance plan . I run it in my production last nite.

After running for 1 hour , the package failed ( the step failed )

As below :

Executed as user: ETSPDCSQL1-VWSYSTEM. ....0.5500.0 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 22:06:13 Progress: 2015-09-08 22:06:14.11 Source: {F0BABEC1-ECBF-4B7D-86BE-7C2C99A08ED8} Executing query "DECLARE @Guid UNIQUEIDENTIFIER EXECUTE msdb..sp...".: 100% complete End Progress

[Code] .....

View 9 Replies View Related

DB Engine :: System Failure Error Check Policy - Filter By Time Generated?

Jan 17, 2013

I have been searching for a means to change the System Failure Error Check policy that comes as part of the Best Practice policies. I want to look back 24 hours. The WQL query shipped with the policy doesn't have a WHERE clause component that looks at TimeGenerated. That query looks like:

IsNull(ExecuteWql('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System"'), 0)

After searching for an example of how to do this and not finding any that are specific to PBM, I decided to fall back to a very basic approach - use wbemtest.exe to try out where clause additions and see how they work, then plug the result into the policy and see if it works. As a start, I tried the following query using wbemtest.exe:

select Event Code
from Win32_NTLogEvent
where EventCode = 6008
and Logfile = 'System'
and TimeGenerated > '20130101010000.000000–000'

This works great in wbemtest.exe. My next step was to plug this into the policy condition expression as follows: IsNull(ExecuteWql ('Numeric', 'rootCIMV2', 'select EventCode from Win32_NTLogEvent where EventCode=6008 and Logfile="System" and TimeGenerated > "20130101010000.000000–000"'), 0)

When I try to manually evaluate this policy in SSMS, I receive an "Invalid Query" error message.I assume that SWbemDateTime isn't available to use inside Policy Based Management policies. All the examples of how to handle the kind of dynamic date creation I have seen are for use in PowerShell, VBScript, or SSIS. I've played with using DateDiff, DateAdd, and GetDate inside the query string, with no success.

Why does the ExecuteWql above fail?Is it at all possible to dynamically generate a datetime (say, 24 hours ago) as part of the query string parameter of the ExecuteWql call?What might that look like?

View 2 Replies View Related

Sp2 Failed For Database Engine

Mar 14, 2007

SP2 failed for database engine.

Following is the error:

EventType : sqlsesetup     P1 : do_sqlgroupmember     P2 : 0x7348    
P3 : do_sqlgroupmember     P4 : 0x7348     P5 : sqlca_sqlsecurityca.cpp@1132
P6 : unknown     P7 : sql9     P8 : hotfix@     P9 : x86     P10 : 3042 

 

Product                   : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final)   :
Status                    : Failure
Log File                  : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number              : 29512
Error Description         : MSP Error: 29512  SQL Server Setup was unable add user NT AUTHORITYSYSTEM to local group DCCIBERSQLServer2005SQLAgentUser$DCSQL01$MSSQLSERVER.


any help appreciated...

View 2 Replies View Related

Check DB Failed.

Nov 16, 2007

Hi

I am a SAP Basis Administrator. One of the job has failed miserably that deals with the MSSQL database.

The error message is been pasted below:

Executed as user: NT AUTHORITYSYSTEM. ...ile: C:Program FilesMicrosoft SQL ServerMSSQLCCMS_CHEC
K_DB_HIST_2007.txt [SQLSTATE 01000] (Message 50000
) Table error: Object ID 0, index ID 0, page (1:2
881160). Test (m_headerVersion == HEADER_7_0) fail
ed. Values are 0 and 1. [SQLSTATE 42000] (Error 89
39) Table error: Object ID 0, index ID 0, page (1
:2881160). Test ((m_type >=DATA_PAGE && m_type <=
UNDOFILE_HEADER_PAGE) (m_type == UNKNOWN_PAGE &
& level == BASIC_HEADER)) failed. Values are 0 and
101. [SQLSTATE 42000] (Error 8939) Table error:
Object ID 0, index ID 0, page (1:2881160). Test (m
_freeData >= PAGEHEADSIZE && m_freeData <= (UINT)P
AGESIZE - m_slotCnt * sizeof (Slot)) failed. Value
s are 0 and 8192. [SQLSTATE 42000] (Error 8939) T
able error: Object ID 0, index ID 0, page ID (1:28
81161). The PageId in the page header = (0:0). [SQ
LSTATE 42000] (Error 8909) Table error: Object ID
0, index ID 0, page ID (1:2881162). The PageId in
the page header = (0:0). [SQLSTATE 42000] (Error
8... The step failed.

Please let me know how to rectify the error.



Sathish

View 2 Replies View Related

SP2 Failed Only On The Database Engine And Now Won't Restart

Feb 22, 2007

I have a clean SQL 2005 Ent. x64 SP1 clean with no user db's.....applied SP2 and everything showed "Success" except the Database Services (Error 29534)......

Time: 02/22/2007 08:29:50.134
KB Number: KB921896
Machine: TORCA8
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 1 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x64
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: No

**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed

**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.1.2047 x64
Database Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE
Analysis Services (MSSQLSERVER) ENU SP1 2005.090.2047.00 x64 ENTERPRISE
Reporting Services (MSSQLSERVER) ENU SP1 9.00.2047.00 x64 ENTERPRISE
Notification Services ENU SP1 9.00.2047.00 x64 ENTERPRISE
Integration Services ENU SP1 9.00.2047.00 x64 ENTERPRISE
SQL Server Native Client ENU 9.00.2047.00 x64
Client Components ENU SP1 9.1.2047 x64 ENTERPRISE
MSXML 6.0 Parser ENU 6.00.3890.0 x64
SQLXML4 ENU 9.00.2047.00 x64
Backward Compatibility ENU 8.05.1704 x64
Microsoft SQL Server VSS Writer ENU 9.00.2047.00 x64

**********************************************************************************
Products Disqualified & Reason
Product Reason

**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID

**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlSupport.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number : 29534
Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (1067) The process terminated unexpectedly.

----------------------------------------------------------------------------------
Product : Analysis Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixOLAP9_Hotfix_KB921896_sqlrun_as.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Reporting Services (MSSQLSERVER)
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Notification Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixNS9_Hotfix_KB921896_sqlrun_ns.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixDTS9_Hotfix_KB921896_sqlrun_dts.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlncli.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQLTools9_Hotfix_KB921896_sqlrun_tools.msp.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 3890
Product Version (Final) : 6.10.1129.0
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_msxml6.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_sqlxml4.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 1704
Product Version (Final) : 2004
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SQLServer2005_BC.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 2047
Product Version (Final) : 3042
Status : Success
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRedist9_Hotfix_KB921896_SqlWriter.msi.log
Error Number : 0
Error Description :
----------------------------------------------------------------------------------

**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 29534


Now SQL Server service won't restart.....

2007-02-22 10:16:31.28 Server Microsoft SQL Server 2005 - 9.00.3042.00 (X64)
Feb 10 2007 00:59:02
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)

2007-02-22 10:16:31.28 Server (c) 2005 Microsoft Corporation.
2007-02-22 10:16:31.28 Server All rights reserved.
2007-02-22 10:16:31.28 Server Server process ID is 2056.
2007-02-22 10:16:31.28 Server Authentication mode is MIXED.
2007-02-22 10:16:31.28 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-02-22 10:16:31.28 Server This instance of SQL Server last reported using a process ID of 576 at 2/22/2007 10:16:15 AM (local) 2/22/2007 3:16:15 PM (UTC). This is an informational message only; no user action is required.
2007-02-22 10:16:31.28 Server Registry startup parameters:
2007-02-22 10:16:31.28 Server -d E:SQLDatamaster.mdf
2007-02-22 10:16:31.28 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-02-22 10:16:31.28 Server -l F:SQLLogsmastlog.ldf
2007-02-22 10:16:31.28 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-02-22 10:16:31.28 Server Detected 4 CPUs. This is an informational message; no user action is required.
2007-02-22 10:16:31.28 Server Cannot use Large Page Extensions: lock memory privilege was not granted.
2007-02-22 10:16:31.40 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-02-22 10:16:31.42 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-02-22 10:16:31.50 spid1s A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 36200, committed (KB): 104760, memory utilization: 34%.
2007-02-22 10:16:33.45 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-02-22 10:16:33.45 Server Database mirroring has been enabled on this instance of SQL Server.
2007-02-22 10:16:33.47 spid5s Starting up database 'master'.
2007-02-22 10:16:33.47 spid5s SQL Trace ID 1 was started by login "sa".
2007-02-22 10:16:33.48 spid5s Starting up database 'mssqlsystemresource'.
2007-02-22 10:16:33.48 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1.
2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
2007-02-22 10:16:33.48 spid5s Error: 5173, Severity: 16, State: 1.
2007-02-22 10:16:33.48 spid5s One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
2007-02-22 10:16:33.48 spid5s Log file 'F:SQLLogsmssqlsystemresource.ldf' does not match the primary file. It may be from a different database or the log may have been rebuilt previously.
2007-02-22 10:16:33.48 spid5s The log cannot be rebuilt when the primary file is read-only.
2007-02-22 10:16:33.48 spid5s Error: 945, Severity: 14, State: 2.
2007-02-22 10:16:33.48 spid5s Database 'mssqlsystemresource' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2007-02-22 10:16:33.48 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.

Tried reinstalling SP 2 in quiet mode using sapwd parameter.....now everything is showing the correct SP2 version but SQL Server Service won't start.......anyone????????

View 14 Replies View Related

DB Engine :: Login Failed For User

May 6, 2015

I am just new in SQL 2012 r2 and we are trying to provision one SQL VM but we are getting an error a"Login failed for user. "Error 18456" when trying to login to the Database Engine for the 1st time via SQL Management Studio. URL...

2015-05-06 12:44:49.57 Logon       Error: 18456, Severity: 14, State: 5.
2015-05-06 12:44:49.57 Logon       Login failed for user 'SDAdmin'. Reason: Could not find a login matching the name provided. [CLIENT: <local machine>]

[code]...

View 3 Replies View Related

Integrity Check Failed

Mar 13, 2008

on sql server 2000, try to do integrity check on several database once a week but failed, what would be main area to look up? thank you

View 3 Replies View Related

DB Engine :: Receive Backup Failed For Server

Oct 6, 2015

I have a VM with Windows Server 2012 and SQL 2014 installed.  Some things about the VM:  Using VMware Workstation 11.  Created with 160 GB hard disk and 4G memory (that's all we could do when needing to run multiple VMs from the box we're using).  I am able to get to the internet and to our network but the internet connection tells me that there is no internet access and we can't seem to fix it.When I attempt to create a backup of one of my DBs, I receive the attached error.  No other backup has been created for this particular DB so it would not need to overwrite anything.  This is an issue for all of the DBs that are in the SQL Server and not just an isolated DB.

We ran DBCC CHECKDB against the DB and no errors were returned.A bit about the DBs:  Our software creates a number of empty DBs upon install.  For testing purposes we have DBs that are populated with data that we restore once the install is complete.  So our procedure is, once all services are shut down for our software and the SQL connection has been cut, we delete the DBs created during install and restore the DBs that will replace them. All of the DBs restored successfully so I don't understand why there would be an issue with backing them up. 

View 8 Replies View Related

DB Engine :: Failed Virtual Allocate Bytes

Aug 5, 2015

We got an error "Failed Virtual Allocate Bytes: FAIL_VIRTUAL_RESERVE"

Microsoft SQL Server 2005 - 9.00.5000.00 (Intel X86)
Dec 10 2010 10:56:29
Copyright (c) 1988-2005 Microsoft Corporation
Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 2)
We had 24CPU intell cores and 64 gb RAM on server.
Sql service starts with enabled AWE + LPM and "-g512" option.

Why we still use such relic configuration it is not my fault. i'm investigate log and find that memorystatus "Optimization Queue" section has really huge values.

Optimization Queue
Overall Memory = 1321132032Target Memory = 1158799360 Last Notification = GROW Timeout = 6 Early Termination Factor = 5Small Gateway Configured Units = 32 Available Units = 26 Acquires = 6 Waiters = 0 Threshold Factor = 250000 Threshold = 250000Medium Gateway Configured Units = 8 Available Units = 7 Acquires = 1 Waiters = 0 Threshold Factor = 12 Threshold = 16094435Big Gateway Configured Units = 1 Available Units = 1 Acquires = 0 Waiters = 0 Threshold Factor = 8 Threshold = 144849920

[code]...

What forced bPOOL to allocate pages in MTL? How to determine that queries? Same about SQL OS.As workaround i increase -g startup option to "-g2048", and "max server memory" was decreased to 54Gb.

View 10 Replies View Related

Integrity Check And Optimization Job Failed

Jul 3, 2006

I found the following error in my maintenance plan please help me on this

Under maintenace plan history i found this error:-

[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.


and jobs failed with following error

i found this error in job history of optimization & integrity check jobs:-

Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.

Please help me find out the solution

Thanks in advance

Regards,

Sumit

View 2 Replies View Related

Check Database Integrity - Failed

Feb 16, 2007

I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :

Alter failed for Server 'LUMONT001'.

Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue?
Thanks, Paul

View 6 Replies View Related

How To Check For Failed Database Backups

May 8, 2007

Hello everyone! Looking for some insight here on database backups that fail.

We have many SQL servers that we maintain by storing Job/Maintenence Plan history on a central server, which then emails out daily reports to let us know what backed up last night and what didn't

This was easy to do in SQL 2000, not so much in SQL 2005. I have put together a query that gathers the info I need for the successes:

SELECT DISTINCT '00000000-0000-0000-0000-000000000001' AS Plan_ID, mpld.line1 as "Plan Name", bud.database_name as "Database", mpld.server_name, 'Backup Database' as Activity, mpld.succeeded, bs.backup_finish_date, DATEDIFF (MS,bs.backup_start_date,bs.backup_finish_date) as Duration, bs.backup_start_date, mpld.error_number, mpld.error_messageFROM msdb.dbo.sysmaintplan_logdetail mpld
INNER JOIN msdb.dbo.backupset bs
on (select convert(char(12),mpld.start_time,109))=(select convert(char(12),bs.backup_start_date,109))-- on bs.database_name=bud.database_name
inner join
msdb.dbo.bu_dbs bud
on bs.database_name = bud.database_name
WHERE mpld.succeeded = 1 and mpld.line2 like 'Backup%' and bs.type='d'
and bs.backup_start_date > ( SELECT CONVERT(char(12), (GETDATE()-1), 109) )
ORDER BY bud.database_name DESC

But I am having trouble using a query to determine the databases the FAILED during backup. MSDB.BackupSet and MSDB.SYSMaintPlan_LogDetail really have nothing,because often times, even if a step in a Maint. Plan fails, the plan finishes reporting success.

Does anyone know of a good way to gather info about failed database backups?

Thank you!

Mario

View 6 Replies View Related

SP2 Failed Only On The Database Engine; The MSSQLSERVER Service Cannot Start

Mar 18, 2007

  I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.

Here are the error messages from 2 of the log files:

Summary.txt:

Product                   : Database Services (MSSQLSERVER)
Product Version (Previous): 1399
Product Version (Final)   :
Status                    : Failure
Log File                  : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log
Error Number              : 29534
Error Description         : MSP Error: 29534  Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.

SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:

Doing Action: ComponentUpgradeInstall
PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007
<Func Name='ComponentUpgradeInstall'>
<Func Name='ComponentUpgrade'>
Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling
Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007
Failed to start service MSSQLSERVER. Error code 2148081668
Service failed unexpectedly (2148081668)
        Error Code: -2146885628
Windows Error Text: Cannot find object or property.
  Source File Name: sqlsetuplibservice.cpp
Compiler Timestamp: Wed Jun 14 16:29:04 2006
     Function Name: sqls::Service::Start
Source Line Number: 301

And below you can see the content of the SQL error log:

2007-03-18 19:46:11.51 Server      Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
 Feb  9 2007 22:47:07
 Copyright (c) 1988-2005 Microsoft Corporation
 Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)

2007-03-18 19:46:11.51 Server      (c) 2005 Microsoft Corporation.
2007-03-18 19:46:11.51 Server      All rights reserved.
2007-03-18 19:46:11.53 Server      Server process ID is 796.
2007-03-18 19:46:11.53 Server      Authentication mode is WINDOWS-ONLY.
2007-03-18 19:46:11.53 Server      Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-03-18 19:46:11.53 Server      This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required.
2007-03-18 19:46:11.53 Server      Registry startup parameters:
2007-03-18 19:46:11.53 Server        -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-03-18 19:46:11.53 Server        -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-03-18 19:46:11.53 Server        -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-03-18 19:46:11.56 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-03-18 19:46:11.56 Server      Detected 2 CPUs. This is an informational message; no user action is required.
2007-03-18 19:46:11.87 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
2007-03-18 19:46:11.98 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-03-18 19:46:14.06 Server      Database mirroring has been enabled on this instance of SQL Server.
2007-03-18 19:46:14.07 spid5s      Starting up database 'master'.
2007-03-18 19:46:14.15 spid5s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.17 spid5s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2007-03-18 19:46:14.37 spid5s      SQL Trace ID 1 was started by login "sa".
2007-03-18 19:46:14.42 spid5s      Starting up database 'mssqlsystemresource'.
2007-03-18 19:46:14.50 spid5s      The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid5s      Server name is 'YODA'. This is an informational message only. No user action is required.
2007-03-18 19:46:14.89 spid9s      Starting up database 'model'.
2007-03-18 19:46:15.06 spid9s      Clearing tempdb database.
2007-03-18 19:46:15.67 spid9s      Starting up database 'tempdb'.
2007-03-18 19:46:15.79 spid12s     The Service Broker protocol transport is disabled or not configured.
2007-03-18 19:46:15.79 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2007-03-18 19:46:15.82 spid12s     Service Broker manager has started.
2007-03-18 19:46:21.62 Server      The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
2007-03-18 19:46:21.62 Server      Error: 17190, Severity: 16, State: 1.
2007-03-18 19:46:21.62 Server      FallBack certificate initialization failed with error code: 1.
2007-03-18 19:46:21.62 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2007-03-18 19:46:21.64 Server      Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
2007-03-18 19:46:21.64 Server      Error: 17182, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
2007-03-18 19:46:21.64 Server      Error: 17826, Severity: 18, State: 3.
2007-03-18 19:46:21.64 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-03-18 19:46:21.64 Server      Error: 17120, Severity: 16, State: 1.
2007-03-18 19:46:21.64 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.


Any advice???

 


 

 

 

View 14 Replies View Related

DB Engine :: Logon Failed For Login Due To Trigger Execution

Jun 24, 2015

I have a logon trigger on a SQL Server 2008 R2 Express Advanced production database to prevent remote logons. The trigger works fine. When I need to connect via my local machine, remotely, I connect via a VPN, can connect with SSMS and do whatever I need. However, if I use a linked server on my local machine (still connected via VPN), I receive the logon error

Msg 17892, Level 14, State 1, Line 1
Logon failed for login 'sa' due to trigger execution.

The trigger is below and it logs any failures, except for the linked server.

If I disable the trigger, the linked server connects ok.

CREATE TRIGGER [tr_MasterLogon]
   ON  ALL SERVER  WITH EXECUTE AS 'sa'
   FOR LOGON
AS
BEGIN
 DECLARE
  @ClientAddress varchar(48) = (SELECT client_net_address

[Code] ....

View 5 Replies View Related

DB Engine :: Unable To Connect To Server / Step Failed

May 12, 2015

i have a sql server job scheduled to run daily twice.the job is running fine , but once  or twice a week the job fails saying."Message Unable to connect to SQL Server '(local)'.  The step failed." all other times the job runs successfully. it randomly the job is failing. once its failed and if i try to run it manually it runs fine or it will start running fine from next schedule onwards.This job mainly executes a stored procedure.the owner of the job is setup as sa. i don't understand why its fail randomly and all other times(90% of cases) it successful."Unable to connect to SQL Server '(local)'.  The step failed."

View 2 Replies View Related

DB Engine :: SSPI Handshake Failed With Error Code

Nov 22, 2010

I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing

DATE/TIME:      
11/22/2010 12:19:57 PM
 
DESCRIPTION: SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure. 
 
COMMENT:      
(None)
JOB RUN:           
(None)

I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
 
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved