DB Engine :: Remote Procedure Call Failed After 2012 Installation
May 8, 2015
We have server with Sql2008 R2 RTM 64 bit standard edition.We installed 2012 sp1 64 bit standard edition in win2012sp1 64 bit as side by side setup.After installation, i found the below error when i opened SSCM:
Remote Procedure Call Failed:
I fixed this error by renaming the MSC file.
At event log i am observing continuously below error:
Source:       Application Error   Event ID:     1000
Faulting application name: wmiprvse.exe, version: 6.3.9600.16384, time stamp: 0x5532e9c9
Faulting module name: svrenumapi100.dll, version: 2009.100.1600.1, time stamp: 0x4bb681be
I can't access SQL Server 2008 R2 remotely on Windows 2008
1. TCP/IP Enabled for SQL Server Network Configuration Protocols, SQL Native Client 10.0 configuration clients, and SQL Native Client 10.0 configuration clients(32 bit)
2. Firewall disabled to make sure its not interferring with things.
I noticed the SQL Server Agent is Stopped. Not sure if this is the issue. When I try and turn this from disabled to Automatic or Manual, I get this error:
I have a bundling package that runs about 20 other packages. It has been working fine for a while but a couple of days ago it fail with the following message,
Error 0x800706BE while loading package file "D:PackagesToradSales.dtsx". The remote procedure call failed.
I´m running the SSIS packages in an 64-bit environment.
I have a SQL2000(sp2) database (ServerA) and a SQL7(sp2) database(ServerB) From the SQL2000 database I want to call a remote stored procedure on ServerB and store the result set in a table on ServerB.
E,g
insert TableA exec ServerB...sp_GetStuff
If I try this by making serverB a remote server, I get the following error message Server: Msg 18456, Level 14, State 1, Line 1 Login failed for user 'sa'. If I make ServerB a Linked server, I get the error Server: Msg 8501, Level 16, State 1, Line 1 MSDTC on server '' is unavailable. Server: Msg 7391, Level 16, State 1, Line 1 The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
Now the MSDTC on ServerB won't start - It returns error 3221229574 to which the solution seems to be to reinstall MSDTC which looks like a very messy job with registry hacks and also the threat of reformatting the hard drive So I don't want to do this if possible
I really don't want a distibuted transaction anyway so I tried to stop the transaction being promoted using SET REMOTE_PROC_TRANSACTIONS OFF
Hi, I was wondering is anyone can help me out on this one, I want to run a query, but I need to reference a Database that exists on a different server. I am using SQL 6.5 Any suggestions would be welcomed, Thanks a mill, Fin
I'm calling a procedure on a remote Server (local SQL2005, remote SQL2005) and I need the return value.
Local: declare @value int execute ('exec mbtest1.dbo.psybcis ?', @value OUTPUT) at [REMOTESQLSERVER] select @value
Remote: create procedure [dbo].[psybcis] (@value int OUTPUT) as begin select @value = '13' end
I do not get a value in the OUTPUT variable - just NULL. Documentation says: Execute a pass-through command against a linked server { EXEC | EXECUTE } ( { @string_variable | [ N ] 'command_string [ ? ] ' } [ + ...n ] [ { , { value | @variable [ OUTPUT ] } } [ ...n ] ] ) [ AS { LOGIN | USER } = ' name ' ] [ AT linked_server_name ] [;] There is an OUTPUT parameter, but how does it work? Is my syntax wrong?
It works when using following syntax, declare @value int exec [REMOTESQLSERVER].mbtest1.dbo.psybcis @value OUTPUT select @value but I need to use this procedure call in a distributed transaction to a Sybase ASE server and this syntax is not allowed for cross-system-calls. So first I want to get it work from SQL2005 to SQL2005.
I can't install the SQL Server 2012 Express version with tools downloaded from [URL]
I'm getting the following error:Â
Error installing SQL Server Database Engine Services Instance Features Could not find the Database Engine startup handle. Error code: 0x851A0019
I'm trying to install a new stand-alone version with a default instance but always getting this error. From the features I'm installing the database engine services (not the replication), all the tools, only the basic management toolds and the SQL Client connectivity SDK.
Further in the installation I'm choosing the Windows authentication and in the list of SQL administrators I've already tried to install as current user but also as System. Both with the same error result.
I've read the other posts related to this issue, but I'm just REALLY confused as to whats happening in my case. Like everyone else it was working fine in SQL 2000 but now in SQL 2005 there is an issue. I'm calling a stored procedure with parameters defined like this:
When I execute the call to the stored proc I get this:
"The incoming tabular data stream (TDS) remote procedure call (RPC) protocol stream is incorrect. Parameter 8 ("@BaseDebit"): The supplied value is not a valid instance of data type numeric. Check the source data for invalid values. An example of an invalid value is data of numeric type with scale greater than precision."
Using the VS.NET command window I then inspect that parameter to see what the heck is going on and get this:
So I set a decmial parameter to 1,000,000, that parameter in the DB is defined as decimal(28,13) so should fit no problem, but it seems the Sql data provider is confused and thinks 1,000,000 is decimal (0,22)???
I have 2 server A and Server B(remote 3rd party) both SQL server 2012. We need to query the data from remote Server B, we are planning to use either view or stored procedure. The query contain multiple joins to fetch data from around 10 tables(minimum 10 tables is there in initial analysis may be more tables will be added in future).If we are going to access the data through VIEW then we are going to write the below query
SELECT * FROM view-name WHERE Column1 ='abc' My first question
Q1. I have a doubt whether this query will load all the data from table joined in the view and then the WHERE condition implement as in the VIEW definition we are not implementing the filter condition.
Q2. Which will has better performance a stored procedure or view.
Q3. How to call a remote stored procedure or View. linked server is not allowed.
Does the 4 part server.DB.Schema.SPorView name will work.
I had search and find about OPENROWSET/OPENQUERY does it works without linked server.
Is it possible to manually force/call/start the system AUTOSHRINK process? I have an issue that appears only when the engine shrinking process is running and I need this to reproduce my bug.
I know how to start a "regular" database shrink process with:DBCC SHRINKDATABASE(xxxx);, but this is not the same as one started from the database engine.
I'm calling this from another sql server.... I created a linked server... and want to restore database backups on the other box.... The restore script runs fine when ran locally but fails with the message below when calling it remotely
Server: Msg 3013, Level 16, State 1, Line 1 RESTORE DATABASE is terminating abnormally. Server: Msg 3101, Level 16, State 1, Line 1 Exclusive access could not be obtained because the database is in use.
CREATE PROCEDURE usp_restore_database_backups AS
RESTORE DATABASE BesMgmt FROM DISK = 'D:MSSQLBACKUPBesMgmtBesMgmt_backup_device.bak ' WITH --DBO_ONLY, REPLACE, --STANDBY = 'D:MSSQLDataBesMgmtundo_BesMgmt.ldf', MOVE 'BesMgmt_data' TO 'D:MSSQLDataBesMgmt.mdf', MOVE 'BesMgmt_log' TO 'D:MSSQLDataBesMgmt.ldf'
WAITFOR DELAY '00:00:05'
EXEC sp_dboption 'BesMgmt', 'single user', true GO
I have set it to read only dbo only .... single user.... still get the same message.... does anyone have any suggestions....
I know that Unix and Windows don't mix very well in more than one way. However, the reality is that most places use both and it appears that SSIS (out of the box) has just about zero support for heterogeneous environments. Has anyone come up with a way (kludge will be gladly accepted) to execute a unix script on a remote unix host? Is anyone using any third-party product like MKS with SSIS?
On a similar note, can you use the execute process task to execute remote windows commands?
We have an application that use SQL server 2005 . The databses on the server are mirrored. Also we have witness. During a test we failovered from principal to mirrored server. Our application gets error message during 5 minutes. The errors were that sql connection has timeout. Also on mirrored server in event viewer I found next errors:
An SNI call failed during a Service Broker/Database Mirroring transport operation. SNI error '10065(error not found)'. You can find this error in sys.message, where message_id=8471
An error occurred in a Service Broker/Database Mirroring transport connection endpoint, Error: 8471, State: 2. (Near endpoint role: Initiator, far endpoint address: '10.10.23.8') The mirroring connection to "TCP://primary_srv:5022" has timed out for database "Application_database" after 10 seconds without a response. Check the service and network connections. Database mirroring connection error 2 'Connection attempt failed with error: '10060(error not found)'.' for 'TCP://primary_srv:5022'. Database mirroring connection error 4 '64(error not found)' for 'TCP://primary_srv.posprod.supersol.co.il:5022'. last 2 errors can be found in sys.message, where message_id=1474Our computers is windows 2003, SQL2005 sp2 with fotfix of audust. Also few ours before this test .Net3 was installed on those computers.
Any advises? Some help & ideas. What does this errors means?
is there any way to execute a SSIS package at the SQL Server programatically from a remote computer? (I use .net 2)
I don't need variables or return values, I only want to start the package. I know that it is easier to do that job with a webservice etc on the SQL Server but I cannot use such.
A method to call a package from a stored procedure would also help me a lot
Please excuse my lack of poper terminology when describing my issue to you, as I am very new to databases.
I have set up a SQL Server database which connects via MS Access. The application works fine, except when trying to connect through VPN.
Through System DSN, I changed the server name (FSERVER) to the server IP address, and test completed successfully. I am also able to ping the server when connected via VPN. However, when I try to start the application, I receive the following error after several seconds:
ODBC-- call failed.
That's it. No other information about the error. I read somewhere to make sure the MDAC versions are the same, which they are.
As I say, I am quite new to this, but would really appreciate any guidance to help me through.
I have a problem which I can't seem to understand what is the cause. Please help!!!
I have this access which run under oracle 10g. Here is the code (below) that I always get error in. When I got into this error, I go to Control Panel -> Administrative Tools-> Data Sources (ODBC) then I choose on acc (microsoft Access Driver (*.mdb)) and click Configure. I select the access and click repair. It get through and I thought that I solve the error, but every time that I close and open the access when try to run, I receive the same error again. If I goes to the same process, click repair. It work, but I have to do it every time that I close and re-open the access. Does anyone know how to make it default so that I don't have to go the same process every time. Thank you.
I have SQL Server 2000 installed on my laptop and am trying to install an instance of MSDE. I keep getting the error message: "The installation of SQL Server 2000 Desktop Engine has failed. Please see the Getting Started manual for further instructions."
I have done this installation before on other machines. Something must be corrupt on my machine (?). The error message is not very enlightening. Any ideas?
Say I inherit from an undocumented installation of SQL server. Is there a way to extract all features, configurations and such to apply them on a different installation?For instance, if the setup was executed multiple times, can I generate a configuration.ini file contains the culmination of every setup executed?
We have schedule process server, calling SSIS package via command line (see below) to physical SSIS server. Get message "insufficient for component" and package call bombs.
Facts:
1. schedule process server has Workstation tools / Clients / Connectivity for SSIS loaded
2. SSIS is 2005, SP1
What are we missing?
c:>dtexec /DTS "File SystemSalesDWgyp_dm_carrier" /SERVER BPATLQDDW /CONFIGFILE "\bpatlqddwd$SSISSalesDWgypdm.dtsconfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING V
Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "Slowly Changing Dimension" (289). End Error Error: 2006-11-09 10:43:34.94 Code: 0xC00470FE Source: DTF - Xfer DW to DM DIM_CARRIER DTS.Pipeline Description: The product level is insufficient for component "OLE DB Command" (775). End Error Warning: 2006-11-09 10:43:34.94 Code: 0x80019002 Source: gyp_dm_carrier Description: The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:43:32 AM Finished: 10:43:34 AM Elapsed: 2.383 seconds
Hi!It has been weeks now that I have been trying to fix an error that Iencounter everytime it gets to the code at runtime:SQLStmt = "SELECT Sum([Quantity in Stock]) As TotalInStock,Sum([Cost] * [Quantity in Stock]) AS TotalCost " & _"FROM [Inventory Products] WHERE [ItemNumber] = '" & ItemNum & "'"Set InvP = CurDB.OpenRecordset(SQLStmt, DB_OPEN_DYNASET) '==>it gets the error hereI tried also to implement the same code using ADODB but still go the sameerror: "ODBC--call failed".There are other events where similar code is executed without any problemsat all.Any guidance would be helpful.Thanks
I moved a sql 2000 database to a sql 2005 server. I have a front end in access 2003. I manually created an ODBC data source system DSN using the ODBC Data Source Administrator just like it was on the other server. I can connect fine but users are saying their getting an odbc call fail. I created the connection and relinked the tables to the new server with the moved database. I completed the same task with another database and the user can connect fine. What could be the problem?
We have this fairly simple Access database with a link table to a view in an SQL Server. The Select Query in Access is a simple select from this view with a view criteria set. Nothing fancy. What is driving is moderately crazy is that this Select Query in Access seems to work fine for months and than all of a sudden (same query performed around the same time with about the same workload on the SQL-Server) it responses with the helpful "ODBC-Call Failed" message. Closing the Access database, taking a coffee, coming back againg and try the exact same Select Query normally works, no "ODBC-Call Failed" message.
It not happens always, mosty we're fine. When it happens it happens for all subsequent queries tried. We have to close and reopen the Access database and pray to the good Lord that it works.
We would be very interested in someone with a solution to this problem.
I am having an issue that i can't seem to resolve. By no means am I an expert with odbc connections and what not but any help would be great.
here is my issue. I have a 64 Bit terminal server that is running MS Access. I have defined my DSN within the 32 bit admin utility and it connects without a problem As soon as i try to link tables and make a connection to the database from within Access i recieve an "ODBC CALL FAILED" message.
I enabled tracing and here is what i got.....this doesn't mean anything to me but hopefully it does to someone.....
PaintJobShip_Ma 1388-ecc ENTER SQLAllocEnv HENV * 002DB3C4
During installation of MSDE the installation hangs at "please wait while Windows configures microsoft sql server desktop engine" I always end up killing the installation process. I am trying to install Windows XPe dev kit and this is the step I am getting stuck on. If I try to skip this step and setup the database the setup obviously tells me that i dont have sql 200 or MSDE installed.
The KB article http://support.microsoft.com/kb/811479 describes the syptoms perfectly, but fast user switching isnt even enabled for this machine and is not the source of the problem.
On my SQL Server 2014 SP1 on Windows Server 2012 R2, allow inbound TCP 1433 and UDP 1434 seems to not be enough for managing remotely any named instance on this server.
I have a database with primary and Unique key contraints on SQL Server 2000. I'm front ending it with Access 2k.
I want to trap the error when the Unique key constraint is hit, but i can't capture the error number. All attempts return error 0.
The error i get is [Microsoft][ODBC SQL Server Driver][SQL Server]Violation of UNIQUE KEY constraint 'IX_lut_Referral_Source'. Cannot insert duplicate key in object 'lut_Referral_Source'. (#2627)[Microsoft][ODBC SQL Server Driver][SQL Server]The statement has been terminated. (#3621)
I've tried the soultion given here http://support.microsoft.com/kb/q185384 but now get a Type mismatch error on errStored
SaveRecODBCErr: ' The function failed because of an ODBC error. ' Below are a list of some of the known error numbers. ' If you are not receiving an error in this list, ' add that error to the Select Case statement. For Each errStored In DBEngine.Errors
I am fairly new to MS-SQL so excuse my ignorance if I have any.
I am trying to add and link a new table to an existing database. I can add the database and colums and add some data into it, and even run a query on it. However, if I try to run a query using the new table and and existing table (linked) I get the following error:
ODBC--call failed. [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot resolve collation conflict for equal to operation. (#446)
Wrote this snipet of code to use Insert Into. I have an ODBC connection to Oracle with the Tables linked. I can edit, add write querries and do everything I need to do except do an Insert Into. So I am thinking it is my code and seeking guidance.
I select add data from a button on the form. It then calls the code below. I know it is making it up to the db.execute statement and failing at that point. Funny thing is I only get the error "ODBC Call Failed" and no other snippets of information. On top of that I can not relink to the tables as they are now unaccessible and I have to completely close down the program and restart. Any help/assistance will be greatly appreciated. Thank you, Here is the code:
Code Start:
Private Sub btn_add_rca_record_Click() On Error GoTo Err_btn_add_rca_record_Click Dim db As Database Dim rsCust As Recordset Dim strSQL As String Dim nbrRcaTicketId As Long
