Data Access :: Conversion Failed When Converting Varchar Value

Jul 21, 2015

I'm trying to pass a character (D) to an integer data type!i'm getting this error:Conversion failed when converting the varchar value '17D' to data type int.

View 5 Replies


ADVERTISEMENT

Conversion Failed When Converting The Varchar Value To Data Type Int.

Sep 28, 2006

Table:Student
Name nvarchar(1000)
Status int

In the stored procedure - I have got a string which contains comma separated Status Values such as

DECLARE @validStatus = '1000,1001,1002'

I want to return the count of students having the status code as in @validStatus

SELECT count(1) FROM Student WHERE Status in (@validStatus)

But the above statement is erroring out with

Conversion failed when converting the varchar value '1000,1001,1002' to data type int.

Any help/suggestion appreciated.

Thanks,
Loonysan

View 14 Replies View Related

Conversion Failed When Converting The Varchar Value To Data Type Int.

May 27, 2008

Hi guys,

My query was working fine until I added the yellow highlighted areas below.
Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.
Now when I run it I get

Conversion failed when converting the varchar value 'po_num' to data type int.

Any ideas? Thanks!


SELECT t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

MIN(

CASE

WHEN t8.linestatus = 'O'

THEN t9.docnum

ELSE NULL

END) po_num,

t10.docduedate





FROM

(SELECT t0.product product ,

SUM(

CASE

WHEN t0.qty_topick <> t0.qty_picked

THEN t0.qty_topick - t0.qty_picked

ELSE 0

END) shorted

FROM rbeacon.dbo.shipline2 t0

INNER JOIN rbeacon.dbo.shiphist t1

ON t0.packslip = t1.packslip

WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)

GROUP BY t0.product

) t3

INNER JOIN comparison.dbo.vlgxplc t2

ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS

LEFT JOIN

(SELECT t0.product AS product,

SUM(t0.quantity) AS onhand

FROM rbeacon.dbo.binlocat t0

GROUP BY t0.product

) t4

ON t3.product = t4.product

INNER JOIN wbau.dbo.oitm t5

ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.ocrd t6

ON t5.cardcode = t6.cardcode

INNER JOIN wbau.dbo.oitm t7

ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.por1 t8

ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.opor t9

ON t8.docentry = t9.docentry

LEFT JOIN comparison.dbo.podatetest('po_num') t10

ON t10.docnum = t9.docnum



WHERE t3.shorted <> 0

GROUP BY t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

t6.cardname,

t10.docduedate

ORDER BY t2.u_vlgx_plc,

t6.cardname ,

t3.product

View 14 Replies View Related

Conversion Failed When Converting Varchar Value Times To Data Type Int

Feb 10, 2015

I try to compile your query, and prompt error message in below 'conversion failed when converting the varchar value 'times' to data type int .Error code 245.

select
user_member
, sum(case when trx_date > dateadd(month, -3, getdate()) then 1 else 0 end) + ' times'
, max(case when trx_date < dateadd(month, -3, getdate()) then trx_date else NULL end)
from trx_hdr
group by user_member

View 1 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value NHS To Data Type Int

Sep 3, 2015

CASE WHEN NULLIF(NHSNo2, '') IS NULL THEN 1
WHEN NULLIF(Surname, '') IS NULL THEN 2
WHEN NULLIF(Forename, '') IS NULL THEN 3
WHEN NULLIF(DOB, '') IS NULL OR DOB < '01/01/1900' THEN 4
WHEN NULLIF(AddressLine1, '') IS NULL THEN 5

[code]...

The above code worth great but ideally instead of returning a number Id like to return text for example

1 = NHS
2= SUR
3=FOR
4=DOB
5=ADD
6=PCO
7=GPN
8=PCZ
9=GPD
10=CCG

View 3 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value To Data Type Int

Nov 13, 2015

i am trying to run to get a list of computers from a table based on the available free space. I'd like to group them based on the available space, for example, up to 1 GB, 1-2 GB, etc. 

With Disk_Space (ResourceID, ComputerName, Description, DiskName, VolumeName, FileSystem, Size, FreeSpace)AS
(
SELECT distinct
SYS.ResourceID,
SYS.Name,
LDISK.Description0,
LDISK.DeviceID0,
LDISK.VolumeName0,
LDISK.FileSystem0,

[code]...

However when i run this query, i get an error : 
Msg 245, Level 16, State 1, Line 1
Conversion failed when converting the varchar value '1GB To 2GB' to data type int.

View 10 Replies View Related

Conversion Failed When Converting The Varchar Value 'APCCE' To Data Type Int.

May 5, 2008

Hi, I was using a Store Proc and it was working nice ,
Now, I am getting this error as:


Conversion failed when converting the varchar value 'APCCE' to data type int
Is that should make any problem as well
Just want to know ..the help
Thanks

View 5 Replies View Related

SQL Server 2012 :: Conversion Failed When Converting Varchar Value To Data Type Int

Aug 12, 2014

I am doing a Case statement to create a unified field for account type and vendor, in the code below I am receiving the error in the subject, because the account numbers have alpha characters in the string, I need to make them as OTHER if the first 2 left chars are Alpha, I thought how I have ISNUMERIC would do that but I am still getting the error.

I am also including example of how the account_numbers are formatted.

R222209
R222220
R222222
R222212
R221123
F707768

[Code] .....

View 5 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value (Date) To Data Type Int

Sep 2, 2015

I am using T-SQL I have a column (ColA)that has datetime format and I simply want to pull the next day but date only into ColB

ColA
3/12/2014 12:00AM
3/19/2014 12:00AM
ColB
3/13/2014
3/20/2014

I have been trying the command below but keep getting the error "Conversion failed when convertint the varchar value '03-03-2014' to data type int."

Convert (varchar(10), "StartDate", 110)+1 as Next Day

View 8 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value (inactive) To Data Type Int

Jul 20, 2015

I am getting this error when I run the case statement below. I think I have to convert at some point, but not sure where or how. 

Case when m.dispo = 2 then 'Inactive' else m.value end 'Score'

View 9 Replies View Related

Transact SQL :: Error Conversion Failed When Converting The Varchar Value YEAR(1999) To Data Type Int

Sep 18, 2015

I am trying to write a query that give me how many items were filed per year.

This is the error:

Conversion failed when converting the varchar value 'YEAR(1999)' to data type int.

Here is the query I am using:

SELECT COUNT (*),
CASE
WHEN ChargesFiledDate > 20141231 THEN 'YEAR (2015)'
WHEN ChargesFiledDate > 20131231 THEN 'YEAR (2014)'
WHEN ChargesFiledDate > 20121231 THEN 'YEAR (2013)'
ELSE YEAR (0000)

[Code] ...

And got the same error.  I know there is probably a better way to get this data (being that I need it from 2007 to present), but don't know how to write it.

View 8 Replies View Related

Conversion Failed When Converting The Varchar Value

Aug 2, 2007

why do i have this error? not converting a varchar into int 1 ALTER PROCEDURE dbo.RevertDB
2 (
3 @Log varchar(MAX) = NULL OUTPUT
4 )
5
6 /* Reverts Database to original "Clean" State */
7 AS
8 SET NOCOUNT OFF
9 DECLARE @RowsInDB AS int
10 SET @Log = 'RevertDB Started at ' + CAST(GETDATE() AS varchar(50)) + '<br />'
11
12 /* *** Disable Constraints ***
13 ALTER TABLE Booking NOCHECK CONSTRAINT ALL
14 ALTER TABLE InventoryPC NOCHECK CONSTRAINT ALL
15 ALTER TABLE PC NOCHECK CONSTRAINT ALL
16 ALTER TABLE Platform NOCHECK CONSTRAINT ALL*/
17
18 /* *** Start Deletes *** */
19 DELETE FROM Booking
20 SET @Log = @Log + 'Clear Table Booking - Done' + '<br />'
21 SET @RowsInDB = (SELECT COUNT(BookingID) FROM Booking)
22 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
23
24 DELETE FROM InventoryPC
25 SET @Log = @Log + 'Clear Table InventoryPC - Done' + ''
26 SET @RowsInDB = (SELECT COUNT(InventoryID) FROM InventoryPC)
27 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
28
29 DELETE FROM PC
30 SET @Log = @Log + 'Clear Table PC - Done' + '<br />'
31 SET @RowsInDB = (SELECT COUNT(PCID) FROM PC)
32 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar(10)) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
33
34 DELETE FROM Platform
35 SET @Log = @Log + 'CLear Table Platform - Done' + ''
36 SET @RowsInDB = (SELECT COUNT(PlatformID) FROM Platform)
37 SET @Log = @Log + '-- Rows Affected: ' + CAST(@@ROWCOUNT AS varchar) + ', Rows in Table: ' + CAST(@RowsInDB AS varchar(10)) + '<br />'
38
39 /* *** Enable Constraints ***
40 ALTER TABLE Booking WITH CHECK CHECK CONSTRAINT ALL
41 ALTER TABLE InventoryPC WITH CHECK CHECK CONSTRAINT ALL
42 ALTER TABLE PC WITH CHECK CHECK CONSTRAINT ALL
43 ALTER TABLE Platform WITH CHECK CHECK CONSTRAINT ALL*/
44
45 SET @Log = @Log + '*** End Truncates ***' + '<br />'
46 /* *** End Truncates *** */
47
48 /* *** Start Insert Platform *** */
49 SET @Log = @Log + 'Start Insert Platform' + '<br />'
50
51 EXEC dbo.InsertPlatfrom 'Windows XP SP2 Professional Edition', 'Some description for Windows XP SP2 Professional Edition over here …'
52 EXEC dbo.InsertPlatfrom 'Windows Vista Ultimate', 'See everything you''re working on more clearly with Windows Aero, and quickly switch between windows or tasks using Windows Flip 3D and Live Thumbnails. You can easily find what you need—when you need it―with Instant Search and live icon previews that display the actual contents of your files. And while you''re at it, give your personal productivity a boost with instant access to the information you care about using Windows Sidebar and Gadgets. Put these easy-to-use and customizable mini-applications on your desktop and reveal the information you''re looking for at a glance. Website: http://www.microsoft.com/windows/products/windowsvista/seeit/default.mspx'
53 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Tiger', 'Some description for Apple Mac OS X Tiger over here …'
54 EXEC dbo.InsertPlatfrom 'Apple Mac OS X Leopard', 'Desktop: The new look of Leopard showcases your favorite desktop image and puts new file Stacks at your fingertips for a stunning, clutter-free workspace. Finder: Browse your files like you browse your music with Cover Flow. Time Machine: See how your system looked on any given day and restore files with a click. Website: http://www.apple.com/macosx/leopard/features/'
55 EXEC dbo.InsertPlatfrom 'Red Hat Linux', 'Some description for Red Hat Linux over here …'
56
57 SET @Log = @Log + 'Rows In Platform: ' + CAST((SELECT COUNT(PlatformID) FROM Platform) AS varchar(10)) + '<br />'
58 /* *** Start Insert PC *** */
59 SET @Log = @Log + 'Start Insert PC' + '<br />'
60
61 DECLARE @WinXP int, @WinVista int, @OSXTiger int, @OSXLeopard int, @RedHat int
62 SET @WinXP = (SELECT PlatformID FROM Platform WHERE Title = 'Windows XP SP2 Professional Edition')
63 SET @WinVista = (SELECT PlatformID FROM Platform WHERE Title = 'Windows Vista Ultimate')
64 SET @OSXTiger = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Tiger')
65 SET @OSXLeopard = (SELECT PlatformID FROM Platform WHERE Title = 'Apple Mac OS X Leopard')
66 SET @RedHat = (SELECT PlatformID FROM Platform WHERE Title = 'Red Hat Linux')
67
68 EXEC dbo.InsertPC 'Fusion PC One', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '1GB Dual Channel DDR2 667 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @WinXP
69 EXEC dbo.InsertPC 'Fusion PC Two', 'Description here ...', 'Intel Core2 Duo E6850 3 GHz 1333MHz', '2GB Dual Channel DDR2 800 SDRAM', '240GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '24" 3000:1 Wide Screen LCD', @WinVista
70 EXEC dbo.InsertPC 'Fusion PC Three', 'Description here ...', 'AMD Athlon 64 X2 Dual Core 6000+ 3 GHz', '2GB Dual Channel DDR2 667 SDRAM', '240GB SATA2 NCQ HDD', 'ATI Radeon Cross Fire 2900 256MB GDDR3', '24" 3000:1 Wide Screen LCD', @WinVista
71 EXEC dbo.InsertPC 'Fusion X1', 'Description here ...', 'Intel Core2 Extreme Q6850 3 GHz 1333MHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8800 Ultra 256MB GDDR3 SLI', '30" 3000:1 Wide Screen LCD', @OSXLeopard
72 EXEC dbo.InsertPC 'Fusion X2', 'Description here ...', 'AMD Athlon 64 FX 74 3 GHz', '6GB Dual Channel DDR2 800 SDRAM', '500GB SATA2 NCQ HDD', 'NVIDIA GeForce 8900 Ultra SLI 256MB GDDR3', '30" 3000:1 Wide Screen LCD', @WinVista
73 EXEC dbo.InsertPC 'Fusion Tiger 1', 'Description here ...', 'Intel Core2 Duo E6600 2.4 GHz 1066MHz', '2GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3 SLI', '22" 3000:1 Wide Screen LCD', @OSXTiger
74 EXEC dbo.InsertPC 'Fusion Linux 1', 'Description here ...', 'AMD Athlon 64 X2 6000+ 3 GHz', '1GB Dual Channel DDR2 800 SDRAM', '120GB SATA2 NCQ HDD', 'NVIDIA GeForce 8600 256MB GDDR3', '22" 3000:1 Wide Screen LCD', @RedHat
75
76 SET @Log = @Log + 'Rows In PC: ' + CAST((SELECT COUNT(PCID) FROM PC) AS varchar(10)) + '<br />'
77
78 /* *** Start Insert Inventory *** */
79 SET @Log = @Log + 'Start Insert Inventory' + '<br />'
80
81 DECLARE @F1 int, @F2 int, @F3 int, @FX1 int, @FX2 int, @FT1 int, @FR1 int
82 SET @F1 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC One')
83 SET @F2 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Two')
84 SET @F3 = (SELECT PCID FROM PC WHERE Title = 'Fusion PC Three')
85 SET @FX1 = (SELECT PCID FROM PC WHERE Title = 'Fusion X1')
86 SET @FX2 = (SELECT PCID FROM PC WHERE Title = 'Fusion X2')
87 SET @FT1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Tiger 1')
88 SET @FR1 = (SELECT PCID FROM PC WHERE Title = 'Fusion Linux 1')
89
90 EXEC dbo.InsertInventory 10, @F1, 2.5, 'iCluster Fusion One'
91 EXEC dbo.InsertInventory 10, @F2, 2.5, 'iCluster Fusion Two'
92 EXEC dbo.InsertInventory 10, @F3, 2.5, 'iCluster Fusion Three'
93 EXEC dbo.InsertInventory 6, @FX1, 6, 'iCluster Fusion X1'
94 EXEC dbo.InsertInventory 6, @FX2, 6, 'iCluster Fusion X2'
95 EXEC dbo.InsertInventory 10, @FT1, 3, 'iCluster Fusion Tiger One'
96 EXEC dbo.InsertInventory 30, @FR1, 2, 'iCluster Fusion Linux One'
97
98 SET @Log = @Log + 'Rows In Inventory: ' + CAST((SELECT COUNT(InventoryID) FROM InventoryPC) AS varchar(10))
99
100 RETURN @Log
  if i remove the last line then all is well. but i get "An SqlParameter with ParameterName '@Log' is not contained by this
SqlParameterCollection."

View 2 Replies View Related

Conversion Failed When Converting The Varchar Value ...

Dec 6, 2006

I am trying to have the aggregate value 1 replaced by 'only one' in my results.

My data looks like this:


Customer_id (int) ; Salesperson_id
1 ; 1
2 ; 1
3 ; 1
4 ; 2
5 ; 2
6 ; 3


...this is the solution I tried:


select
case when count(convert(varchar(15), customer_id)) = 1
Then 'only one customer'
else count(convert(varchar(15), kund_id)) end as no_of_customers,
salesperson_id
from customerdb
group by
salesperson_id

...and this is the result I was hoping for


no_of_customers ; salesperson_id
3 ; 1
2; 2
only one customer;3


...but SQL server only returns: Conversion failed when converting the varchar value ...

View 1 Replies View Related

Conversion Failed When Converting Varchar To Int

May 26, 2008

Hi guys,



My query was working fine until I added the red writing below.

Basically what I'm doing with this is getting the lowest open purchase order number (docnum) and its matching docduedate.

Now when I run it I get

Conversion failed when converting the varchar value 'po_num' to data type int.



Any ideas? Thanks!



SELECT t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

MIN(

CASE

WHEN t8.linestatus = 'O'

THEN t9.docnum

ELSE NULL

END) po_num,

t10.docduedate





FROM

(SELECT t0.product product ,

SUM(

CASE

WHEN t0.qty_topick <> t0.qty_picked

THEN t0.qty_topick - t0.qty_picked

ELSE 0

END) shorted

FROM rbeacon.dbo.shipline2 t0

INNER JOIN rbeacon.dbo.shiphist t1

ON t0.packslip = t1.packslip

WHERE t1.date_upld = CONVERT(VARCHAR(10), GETDATE()-1, 101)

GROUP BY t0.product

) t3

INNER JOIN comparison.dbo.vlgxplc t2

ON t2.itemcode = t3.product COLLATE Latin1_General_CI_AS

LEFT JOIN

(SELECT t0.product AS product,

SUM(t0.quantity) AS onhand

FROM rbeacon.dbo.binlocat t0

GROUP BY t0.product

) t4

ON t3.product = t4.product

INNER JOIN wbau.dbo.oitm t5

ON t3.product = t5.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.ocrd t6

ON t5.cardcode = t6.cardcode

INNER JOIN wbau.dbo.oitm t7

ON t3.product = t7.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.por1 t8

ON t3.product = t8.itemcode COLLATE SQL_Latin1_General_CP850_CI_AS

LEFT JOIN wbau.dbo.opor t9

ON t8.docentry = t9.docentry

LEFT JOIN comparison.dbo.podatetest('po_num') t10

ON t10.docnum = t9.docnum



WHERE t3.shorted <> 0

GROUP BY t3.product ,

t7.itemname ,

t2.u_vlgx_plc,

t3.shorted ,

t4.onhand ,

t6.cardname,

t10.docduedate

ORDER BY t2.u_vlgx_plc,

t6.cardname ,

t3.product

View 9 Replies View Related

Conversion Failed When Converting The Varchar Value '@Itinerary.ticketid' To Data Type Int(but My Ticketid Value Already Integer

Nov 25, 2007


this is in form VB
Private Sub orderidtxbx_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles orderidtxbx.Click
sqlconnection = New SqlConnection("Data Source= xxxx;Initial Catalog = xxxx; user ID = sa; Password = xxxxx;")
sqlcommand = New SqlCommand("select Customer.LastName, Customer.FirstName from customer where ticket.ticketid ='" & orderidtxbx.Text & "'", sqlconnection)

sqlconnection.Open()
sqldatareader = sqlcommand.ExecuteReader()
ListBox1.Items.Add(sqldatareader.Item("LastName") & " " & sqldatareader.Item("FirstName")

error msg The multi-part identifier "ticket.ticketid" could not be bound



query in sql 2005,I need to make store procedure.


SELECT Itinerary.FlightID, Itinerary.Class, Itinerary.Quantity, Ticket.Date, Flight.FlightNo, Flight.AirLine, Flight.DepartureDate, Flight.ArrivalDate,
Flight.DepartureTime, Flight.ArrivalTime, Flight.Price, Departure.DepartureLocation, Arrival.ArrivalLocation,GST=convert(int,Itinerary. Quantity*0.06*Flight.Price),PST=convert(int,Itiner ary.Quantity*0.07*Flight.Price),TotalPrice=convert (int,(Itinerary.Quantity*0.06*Flight.Price)+(Itine rary.Quantity*0.07*Flight.Price)+Flight.Price)
FROM Flight INNER JOIN
Itinerary ON Flight.FlightID = Itinerary.FlightID INNER JOIN
Ticket ON Itinerary.TicketID = Ticket.TicketID INNER JOIN
Departure ON Flight.DepartureLocationID = Departure.DepartureID INNER JOIN
Arrival ON Flight.ArrivalLocationID = Arrival.ArrivalID
WHERE (Itinerary.ticketid = '@Itinerary.ticketid')


if i change WHERE (Itinerary.ticketid = 1)
it will read the data in the table.

I need to refer that itinerary.ticketid into textbox in form that's why i make like this WHERE (Itinerary.ticketid = '@Itinerary.ticketid') but i don't know what is worng with this.

This error Msg 245, Level 16, State 1, Line 2
Conversion failed when converting the varchar value '@Itinerary.ticketid' to data type int(but my ticketid value already integer not varchar).

View 4 Replies View Related

T-SQL (SS2K8) :: Conversion Failed When Converting Varchar To Int

Mar 6, 2015

I have a statement that I'm having trouble converting:

select * from emails join InternalContacts On emails.EmailAddress = InternalContacts.EmailID
When I run this I get -

Conversion failed when converting the varchar value 'credentialing@floridaeyeclinic.com' to data type int.

What is the correct syntax to convert?

View 2 Replies View Related

Conversion Failed When Converting The Varchar Valu

Mar 6, 2008

I am recieving the following error when executing the following code. Field MonData is nvarchar (80), the only integer feild in the concatination is @Cnt all other fields are varchar or nvarchar. If I remove the everything past space(22) it works fine. I double checked the length and it does not exceed 80 bytes.
Can anyone see what I am doing wrong?

INSERT INTO tbl_Export
Select DISTINCT TOP(1) space(32) + '9' + space(2) + @Cnt + space(2) + Sys + space(2) +
Prin + space(22) + 'TEN' + space(1) + 'ZZ' As MonData
FROM dbo.Trans
WHERE Sys = @vwSys AND Prin = @vwPrin

ERROR:
Conversion failed when converting the varchar value 'TEN' to data type int.

Any input is welcome, thanks so much.

View 8 Replies View Related

Error Conversion Failed When Converting The Varchar Value

Jan 23, 2008

I have a Condition in my stored procedure

AND tt.RevenueTypeID LIKE CASE WHEN @iRevenueTypeID = -1 THEN '%' ELSE @iRevenueTypeID END



@iRevenueTypeID is declared as VARCHAR(6)

When i am passing 'PRP in the the Stored procedure for iRevenueTypeID

it was working fine till now but now it is giving error as


Conversion failed when converting the varchar value 'PRP' to data type int.


What i am doing wrong?

View 3 Replies View Related

Transact SQL :: Conversion Failed When Converting Varchar Value To Int

Nov 24, 2015

I have written below query.

-- AssignedToTasks 32,'from (Select Distinct wft.*','
OVER(Order by task.TaskId desc)','','where IsActive=1 AND RecurrenceRule is null',0,5
Alter PROCEDURE [dbo].[AssignedToTasks]

@UserId varchar(15)  ,
@selectClause Nvarchar(max),

[Code] ....

View 4 Replies View Related

SQL Server 2012 :: Conversion Failed When Converting Varchar Value

Dec 19, 2013

Within in Visual Studio 2012 solution, I have several projects, one of which is a Database project. I am defining several tables. The one in question is:

CREATE TABLE [dbo].[tblKppHierarchyPcl]
(
[ID] NUMERIC(18,0) NOT NULL,
[Name] VARCHAR(500),
[PartStructureKey] NUMERIC(18,0) NOT NULL,
[PartNumber] VARCHAR(500) NOT NULL,
[ParentPartNumber] VARCHAR(500) NULL,

[code]...

Error SQL72014: .Net SqlClient Data Provider: Msg 245, Level 16, State 1, Line 76 Conversion.failed when converting the varchar value 'Coolant Quick Disconnect' to data type int.So it has a problem with inserting 'Coolant Quick Disconnect' into the Name column. The Name column is CLEARLY a varchar column but somehow it thinks it's an int column.

View 8 Replies View Related

SQL Server 2008 :: Conversion Failed When Converting Varchar Value - Error

Sep 24, 2015

I am getting the following message when trying to run the below sql

Msg 245, Level 16, State 1, Line 15

Conversion failed when converting the varchar value 'Select COUNT(*) From Adventures.dbo.tblLibrary' to data type int.

Declare @Datestart as Date
Declare @CntBefore as int
Declare @CntNow as int
Declare @Database as varchar(30)
Declare @TableName as varchar(60)

[Code] ....

View 9 Replies View Related

Conversion Failed When Converting The Nvarchar Value '3,4' To Data Type Int.

Jun 1, 2008

i am getting this error when passing multiple checkbox values to next page..
 Error is Conversion failed when converting the nvarchar value '3,4' to data type int.
my code is below
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:mobiletimesConnectionString %>"
SelectCommand = "SELECT * FROM [device] WHERE [dev_id] IN (@chk1)">
<SelectParameters>
<asp:FormParameter FormField="chk1" Name="chk1" />
</SelectParameters>
</asp:SqlDataSource><asp:DataList ID="DataList1" runat="server" DataSourceID="SqlDataSource1"
BackColor="White" BorderColor="#CC9966" BorderStyle="None" BorderWidth="1px"
CellPadding="4" GridLines="Both">
<FooterStyle BackColor="#FFFFCC" ForeColor="#330099" />
<ItemStyle BackColor="White" ForeColor="#330099" />
<SelectedItemStyle BackColor="#FFCC66" Font-Bold="True" ForeColor="#663399" />
<HeaderStyle BackColor="#990000" Font-Bold="True" ForeColor="#FFFFCC" />
<ItemTemplate><div class="overviewpdamain" >
<div class="overviewpdadevice">
<center>
<b><%#Eval("dev_name")%></b><br />
<b>
</b>
</center></div>
</div></ItemTemplate>
</asp:DataList>

View 6 Replies View Related

Conversion Failed When Converting The Nvarchar Value Xxxxxxxx To Data Type Int

Sep 4, 2007

I am using Sql server 2005, Asp.net 2.0. In my application i have to store a mobile number in database, and in table it is declared as nvarchar(50) (datatype). In stored procedure as it is nvarchar(50). In my code , stored procedure is called in a function. In that while executing project error is coming as (cmd.ExecuteNonQuery)
Conversion failed when converting the nvarchar value xxxxxxxxx to data type int.
Kindly give your suggestions to solve this problem.

View 10 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type

Oct 12, 2006

I am newbie in asp and sql, and I am using VS & SQL expresswhen I try to submit I get following error"Conversion failed when converting character string to smalldatetime data type"Following is my insert statement<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')"></asp:SqlDataSource>These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.I would appriciate if somebody could help.

View 7 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type.

Mar 25, 2007

Hello, I have problem with this code.(This program presents - there is GridView tied to a SQL database that will sort the data selected by a dropdownList at time categories. There are  2  time categories in DropDownList - this day, this week.
 Problem: when I choose one categorie in dropDownlist for examle this week and submit data on the server I got this error.
Conversion failed when converting character string to smalldatetime data type.
Here is code:
<%@ Page Language="C#" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<script runat="server">
 
 
protected void DropDownList1_SelectedIndexChanged(object sender, EventArgs e)
{
 
string datePatt = @"yyyymmdd";
// Get start and end of day
DateTime StartDate = DateTime.Today;
 
string @StartDate1 = StartDate.ToString(datePatt);
 
string @EndDate = StartDate.AddDays(1).ToString(datePatt);
// Get start and end of week
string @startOfWeek = StartDate.AddDays(0 - (int)StartDate.DayOfWeek).ToString(datePatt);
string @startOfNextWeek = StartDate.AddDays(7 - (int)StartDate.DayOfWeek).ToString(datePatt);
 
 
switch (DropDownList1.SelectedValue)
{
 
case "1":
// day
SqlDataSource1.SelectCommand = "SELECT [RC_USER_ID], [DATE], [TYPE] FROM [T_RC_IN_OUT]" + "WHERE" + "[DATE] >=" + "'@StartDate1'" + " AND [DATE] < " + "'@EndDate'";
break;
case "2":
//week
SqlDataSource1.SelectCommand = "SELECT [RC_USER_ID], [DATE], [TYPE] FROM [T_RC_IN_OUT]" + "WHERE" + "[DATE] >=" + "'@startOfWeek'" + "AND [DATE] <" + "'@startOfNextWeek'";
break;
 
}
 
}
 
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head id="Head1" runat="server">
<title>Untitled Page</title>
<style type="text/css">
body {
font: 1em Verdana;
}
</style>
</head>
<body>
<form id="form1" runat="server">
<div>
&nbsp;&nbsp;
 
<asp:DropDownList ID="DropDownList1" runat="server" AutoPostBack="True" OnSelectedIndexChanged="DropDownList1_SelectedIndexChanged"
Style="z-index: 100; left: 414px; position: absolute; top: 22px">
<asp:ListItem Selected="True" Value="1">jeden den</asp:ListItem>
<asp:ListItem Value="2">jeden tyden</asp:ListItem>
</asp:DropDownList>
 
<asp:GridView ID="GridView1" runat="server" Style="z-index: 102; left: 228px; position: absolute;
top: 107px" DataSourceID="SqlDataSource1" AutoGenerateColumns="True">
 
</asp:GridView>
&nbsp; &nbsp;<br/> <br/>
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="Data Source=CRSQLEXPRESS;
Initial Catalog=MyConn;Integrated Security=True"
ProviderName="System.Data.SqlClient"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
 

View 4 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type

Oct 3, 2007

I am running the following query:
 select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where  cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and  cast(HQDIS as varchar(8)) >= (Select CONVERT(varchar(8), getdate(), 1))  and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead   order by hqvend,fprod
The bold sections are giving me the error message. The query works as written above, butis only evaluating on one date, contained in hqeff. However, when I try to modify the second date, HQDIS, by casting it the same way as the one before it:
 select distinct hqvend, hqvprd,fprod,idesc,ilead,sum(cast(fqty as int) )as fqty, (cast(hqvend as varchar(5))+'/'+ltrim(rtrim(fprod))+'/'+cast(ilead as varchar(3))) as Keydata,'L1/'+rtrim(fprod) as LocPartno from tblkfpl01 inner join hqtl01 on (fprod=hqprod) inner join iiml01 on (hqvend=ivend and hqprod=iprod) where  cast(cast(hqeff as varchar(8)) as smalldatetime) <= (Select CONVERT(varchar(8), getdate(), 1)) and  cast(cast(HQDIS as varchar(8)) as smalldatetime) >= (Select CONVERT(varchar(8), getdate(), 1))  and hqvend like '134%' group by hqvend,fprod,hqvprd,idesc,ilead   order by hqvend,fprod
I get the error message. I need to select based on both dates (hqeff AND HQDIS), but cannot seem to be able to it.... Both fields are of type Dedimal, with a length of 8, and dates stored in them look like: 20071003 (YYYYMMDD).
Any suggestions?

View 2 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type

Oct 21, 2007

Hi,

I have SQL Server 2005 database table with the following data definition as follows:

ID int
LST_TIME varchar(5)
LST_DATE varchar(21)
LST_WEEK int
SUBJECT varchar(100)


Date format (Month,day YEAR) eg.- October, 21 2007
Time format, 00 - 23 hours, HH:MM eg. - 18:58

, and a VB code as below:

Dim Command As New SqlClient.SqlCommand("SELECT * FROM dbo.LISTS WHERE (LST_WK = DATEPART(wk, GETDATE())) AND (CONVERT(datetime, LST_DATE) = CONVERT(datetime, CONVERT(varchar, GETDATE(), 110)))
AND(CONVERT(smalldatetime, LST_TIME) = CONVERT(smalldatetime, CONVERT(varchar(5), GETDATE(), 108)))", conn)

Dim dataReader As SqlClient.SqlDataReader = Command.ExecuteReader(CommandBehavior.CloseConnection)
While dataReader.Read()

Dim NewAlert As New Alert(dataReader("SUBJECT").ToString(), DateTime.Parse(dataReader("LST_DATE").ToString(),
DateTime.Parse(dataReader("LST_TIME").ToString())))

:
:
:
I am encountering error: System.Data.SqlClient.SqlException: Conversion failed when converting character string to smalldatetime data type, which points to the codes in bold. Just wondering anyone out there has got a solution to my problem. Thank you.

View 5 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type

Apr 10, 2008

Recently i traspased a database from sql server 2000 in spanish to sql server 2005 in english. I change the language of the user sa to spanish and the database is in spanish. . The problem is our dateformat is dmy, i try to force with set dateformat dmy, but always i execute a stored procedure that have a date as input it fail. The error is:

Msg 295, Level 16, State 3, Procedure pa_CalendarioGestion, Line 40
Conversion failed when converting character string to smalldatetime data type.

The code of stored procedure in this line is:

set @diaActual = dateadd("d", @i, @fechaInicio)

This stored procedure in sql server 2000 in spanish not have any problems. For this reason i think the problem is in the configuration.

I hope someone can help me. Thanks.

View 10 Replies View Related

Conversion Failed When Converting Character String To Smalldatetime Data Type

Oct 10, 2006

I am newbie in asp and sql, and I am using VS & SQL express

when I try to submit I get following error

"Conversion failed when converting character string to smalldatetime data type"

Following is my insert statement

<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:oncallConnectionString %>"

SelectCommand="SELECT data.* FROM data" InsertCommand="INSERT INTO data(Apps, Location, Impact, System, Date, Start_Time, End_Time, Duration, Problem, Cause, Solution, Case, Comments) VALUES ('@DropDownList1','@DropDownList2','@DropDownList3','@TextBox6','@DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3','@TextBox1','@TextBox2','@TextBox3','@TextBox4','@TextBox5','@TextBox7')">

</asp:SqlDataSource>

These are @DropDownCalendar1','@DropDownCalendar2','@DropDownCalendar3' defined as datetime in database.

I would appriciate if somebody could help.

Thanks

View 3 Replies View Related

Error Message Conversion Failed When Converting The Nvarchar Value To Data Type Int??

Jan 19, 2007

Hi,

I can't seem to fix the following error in my stored procedure.

Error Message: Conversion failed when converting the nvarchar value '1007-001' to data type int.

The line of code in my stored procedure that seems to be the problem is the following:

CASE WHEN [Order Details].[Job No] IS NULL THEN [Orders].[Order No] ELSE [Order Details].[Job No] END

Order No has a data type of INT and Job No has a data type NVARCHAR(8). In the above case statement i'm not trying to convert anything but just display a column depending on the out come of the case statement. If anyone knows how to get around this error you help would be very welcome.

View 2 Replies View Related

Error Conversion Failed When Converting The Nvarchar Value 'xxxxxx' To Data Type Int, For Return Value

Aug 24, 2007

ALTER procedure [dbo].[findConsultantMail]

(



@PerID numeric(18,0),

@perMail nvarchar(100) OUTPUT



)

as

SELECT @perMail=PerMail FROM Personel

WHERE (PerID =@PerID)

return @perMail


I want to get Email address from sql database.
But whenever I executed stored procedure I get an error message
"Conversion failed when converting the nvarchar value 'xxxxxx@xxxxxx' to data type int"
If I want some numeric ID it is worked.

I also change my SP like this but results same.


ALTER procedure [dbo].[findConsultantMail]

(



@PerID nvarchar(18),

@perMail nvarchar(100) OUTPUT



)

as

SELECT @perMail=PerMail FROM Personel

WHERE (PerID =cast(@PerID as numeric(18,0)))

return cast(@perMail as nvarchar(100))



How can I get a string value form stored procedure.

View 4 Replies View Related

T-SQL (SS2K8) :: Conversion Failed When Converting Character String To Small Date-time Data Type

Jul 15, 2014

All source and target date fields are defined as data type "smalldatetime". The "select" executes without error though when used with "insert into" it fails with the error:

Msg 295, Level 16, State 3, Line 25: Conversion failed when converting character string to small date-time data type..I am converting from a character string to smalldatetime since the source and target date columns are "smalldatetime". All other columns for the source and target are nvarchar(255). I assume there is an implicit conversion that I don't understand. In a test, I validated that all dates selected evaluate ISDATE() to 1.

USE [SCIR_DataMart_FromProd_06_20_2014]
GO
IF OBJECT_ID ('[SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]', 'U') IS NOT NULL
DROP TABLE [SCIR_DataMart_FromProd_06_20_2014].[dbo].[IdentifierLookup]

[code]....

View 9 Replies View Related

Conversion Failed When Converting Nvarchar Value

Aug 13, 2014

i have the following code:

SELECT Quantity
FROM dbo.BNYForwardsTaxLotsForwards
WHERE investmentType ='Forward Cash'
and Quantity < 0

And I get the following error Msg 245, Level 16, State 1, Line 1..Conversion failed when converting the nvarchar value '-12213949.9' to data type int.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved