We lost all the data we had in a table. We restored the db and the transaction log up to a point in time, but could still not recover the table. We eventually only do db restore without the transaction log. We recovered the data in the table in question, but lost all the data entered that particular day. Does any body have a solution or suggestion that can help? I will be greatly appreciated.
View 2 RepliesI used sql 2000 create a data base at home call 'Mysite' several months ago, there are about eight tables and 30 stored procedures. When I run my asp.net program at home yesterday, and found can't connect to database. The error as follow: "Cannot open database requested in login 'Mysite'. Login fails. Login failed for user 'MINGYANG-MSONXHASPNET'. "
When I open the database, very surpriced to found that my database was suspect and not any item inside it. The suspect database include CommunityStarterKit. But Northwind and pubs database still there?
What happen? Last week I just download new Norton antivirus software, does have any relationship with it? Does data really gone? How to solve this problem?
Please help me if you have these experience.
this morning, one user asked me that she entered a data (only one record,)on the database yesterday, but later she checked that is gone, I check the database, i am sure the data is now there. how do i retrieve the data back, or how do i know whehter this is user problem? Thanks in advance
View 2 Replies View RelatedHi Guru,This weekend, I migrated SQL Server7.0 to 2000 and below is thescenarios:1.) At exactly 4:00PM on Sturday 17th, do full backup(T-SQL) and put adatabase into single user mode.2.) Copy both Saturday 4PM and Friday night full dump to the SAN.3.) Delete WinNT4.0.4.) Reinstall Win2003 and service pack3a.5.) Copy Saturday 4PM backup file to the server and do restore and douser ID mapping.This database is in full mode and I do log backup every hour. However,after restoring the database, any changes after the 14th were missing.Now, When I restored Friday night backup, we still recovered data tothe 16th. My question is, why the 17th 4PM backup did not copy anychange from 15th to the 17th Saturday?I still had Sturday backup file, howe can I recover the 17th data? Logexplorer or ApexSQLLog?Is this Disk issue?Thanks very much,Silaphet,
View 1 Replies View RelatedHi,
I have encountered problem in the merge replication with conflict caused by foreign key constraint. As I did some reseach that it can be avoided by increase the upload and download batch generations.
My question is how can I recover the data which has been lost?
Thanks
i make an application to insert data to sdf file and save it
when i colse the application and open it again i find my stored data on the sdf file well
and if i closed the application 1000 times i'll find my data ok
that's ok and that's not the problem
the problem that when i open this sdf file from sql server management studio and make a select on it i don't find any result and when i try to open the db from my application again i found it empty with no data
i realized that management studio delete's the data from my db
Any Ideas Here ???
I Somehow restored the latest database onto the test database. Can I now retrieve the lost data. If Yes , How is it possible.
Akash
Is there any way to get the deleted records from LDF or MDF file. Today by accidentally I executed one query and that dropped my table Inbox(table name only) from database. And in that table there was more 4,000 records, all these lost. So anybody can help me how to recover this table records?. Is there any way to get these?
I don't have any backup for this table.
shaji
Hello!
Hopefully someone can help me that i have lost my data on my D: drive.
driven shown all folder but in side of the folder there is nothing.
i have lost my Doc, xls, Jpeg etc. all files.
please help me what sould i have to do.
thanks
hi,
i want to lost data automatically after 3days.
but i don't know how to use job scheduling in sql2000 and how to query to add date to datatime column automatically when the data is inserted.
Plz help me!
Urgesnt..data lost when run the script.i generate a script a data base then i run it on query analizer in same data base .But problem is data base and all design view is safe but all data is lose.how can recover it.thanks.
View 2 Replies View RelatedHello All,
Thanks in advance for your help.
I am wondering if there is a correlation between the size of a database and the amount of RAM required in the server. Here's what's going on:
NT4.0 SP 6a, SQL 7.0
2-800 MHz Pentium III Processors
512 MB RAM
Swap Files: two, divided evenly between two partitions, min 512 per partition (dynamic)
3- 9.2 GB Drives, RAID 5
SQL Database size: 2.5 GB
The SQL administrators have a scheduled job set to dump the database every four hours, so they have 6 of these dump files per day. Seagate Backup Exec v 6.? backs up those files every evening. Of course, this is a mission-critical application.
As the NT/Hardware administrator, I was tasked to flash upgrade all the hardware that could be flashed. That happened about three weeks ago. Ever since I flashed it, getting the data dumps has been an inconsistent process. Sometimes it works, sometimes it errors out. The error message is " Lost Delayed - Write Data: The system was attempting to transfer file data from buffers to (path). The write operation failed, and only some to the data may have been written to the file."
On and off during the day, you can't even copy a small file on the server without receiving the same message.
Before I flashed the server, it was blue-screening and needing to be rebooted about once every two weeks. Since I flashed it, the server hasn't been rebooted, because it hasn't blue-screened.
The database dumps are about 2 GB. We were thinking that the way the dump process worked was that a snapshot of the data was put into memory before it was written to disk. We thought since the dump size was larger than Physical Memory + Virtual Memory, that that could be causing the error.
What do you guys think?
1. Is dumping the database first the preferred way to get a backup, or should a backup directly to tape be scheduled instead?
2. Do we have enough RAM for the database?
3. Are there special settings we should set for the RAID controller card to maximize throughput for SQL?
Thanks again. I am definitely not a SQL DBA and any information you can provide would be really helpful.
a sql server database always contains two file.*.ldf *.mdf
When *.ldf was deleted the database may suspend.we can repair such database through about 20 steps.
if you want repair your database .please contact me with email:cn9526@163.net or msn/email :paulyang8848@hotmail.com
you can also see our homepage http://www.haou.net/sqlother/
the service price is begin at 200 US DOLLOR.
HiWhen we issue a DBCC SHRINKFILE with empty option, the data fileis removed and the space is alloted back to the OS.Same way when we issue a an ALTER DATABASE to remove a database,all the data files and transaction log files are dropped.But can these files be recovered again by using any of the diskrecovery tools?Achilles
View 1 Replies View RelatedI have a website that is used to enter dates from a calendar. For example, user A might go to the website and select 20 different days in January. When user A clicks on the Save button the dates are written to the database with an INSERT command. This works fine. However, when user B then goes through the same procedure, say selecting 5 dates that are in the set selected by user A, those dates are properly saved in the database but the rows containing user A's same 5 dates disappear. I suspect this is something simple but I'm new and ignorant. Please help.
View 4 Replies View Related
I have Excel file with data and I need load these data to database. One of the colume consit following data:
1
2
3
4
test5
6
7
8
9
but when I created connection (Excel Source) and click Preview... in Excel Source Editor, I got following data:
1
2
3
4
NULL
6
7
8
9
Why? How can I get all data as string?
I am migrating from 2000 to 2005 and in the process of rewriting DTS to SSIS. So far so good.
I have an import of a flat file that I need to reproduce that works fine in DTS but throws SSIS.
The file contains details of products, and has a Long Description field that may contain lots of different chars - CR & LF amongst them. It's source and destination columns are Text type.
The file is tab delimited, text delimited with double quotes, with row delimiters of CRLF and column names on row 1.
The error SSIS throws is "The column delimiter for column "LongDescription" was not found"
I imagine (perhaps wrongly) that this is because of the extra CRLFs but it worked fine in DTS. It also previews fine, and lets me define the column properties OK in SSIS package designer.
Any help greatly appreciated. I am trying to avoid the obvious thing of replacing those chars in that field at this point as currently the export is shared between a live production server, and my test 2005 rig.
Thanks v much.
Chris.
I know that anything in a CDATA section will be ignored by an XML parser. Does that hold true for the SSIS XML Source?
I am trying to import a large quantity of movie information and all of the reviews, synopsis, etc are contained in CDATA. example:
<synopsis size="100"><![CDATA[Four vignettes feature thugs in a pool hall, a tormented ex-con, a cop and a gangster.]]></synopsis>
Sounds like a good one, no?
The record gets inserted into the database however it contains a NULL in the field for the synopsis text. I would imagine that the reason for this would fall at the feet of CDATA's nature and that SSIS is ignoring it.
Any thoughts would be appreciated. Thanks.
I need help!
I have Outlook 2007 w/BCM running on XP Pro workstation connecting to a SBS 2003 R2 hosting my SQL 2005 database. I have two problems: First I can get the BCM to connect to the remote data but periodically the connection is lost and many times it requires a reboot to reconnect. Secondly related to teh first, I can never get MS Accounting 2007 to connect to the same server and database from my client.
I have already set up the server to use port 5356 via TCP amd added a hole through my client windows firewall for the same port. Both client and server are set to share files and printers.
Any suggestions?
Hello,
Data is being trnasferred from an Oracle view to a SQL Server 2005 table.
Decimals can be previewed in the from the "SQL Command Text Window" but the columns in the target table which are defined as float shows the data being rounded to zero decimal places.
For the Data Source the always use default code page is selected.
Is there a way to retain the decimals?
Thank you,
Rod
I am using visual basic 2008
I am making a program, I used sql server compact edition (sdf) (i think it is no more only for mobile device, I am working for desktop application)which i created with the same visual basic. i update data by using table adapters,
when I close the program and build again, the data previosly updated are deleted, and I get empty database?? why is that. do i need to set some copy to.........properties. i have used copy if new.
After designing a SSIS package in Visual Studio 2005 that had two connection manager defined to keep the password. After I deployed the package to a file system. I then Imported the .dtsx file after making a Integration Services connection in Sql Server Management Studio. When I tried to run the package it failed when it tried to make the connection. When I edited the connection manager connection string and added the password and the package ran fine but it does not retain the password!. I need to have this package scheduled to run daily so I need to know how to have the package keep the password in the connection string. I have seen other posts on this issue but not seen a good solution. Could someone point me to the proper MSDN article that would explain how to implement this ? Is it a SQL Server configuration issue or a property in Visual Studio SSIS design time ?
thanks.
Hi,
I am having following problem in our SQL Server 2000 database €“
Somehow/body accidentally backup (complete) our database back to an old back up from 17th March 2008. So the data from 17th March to 20th May is lost.
And that was the most recent backup that we had for the database because Maintenance Plan was not working from the last march due to some kind of failure and nobody knows about it. L
Using Redgate€™s Log Rescue and Apex Log Rescue tool but we could not find any entry from 17th March to 20th May. Most probably because of the complete back up.
Can any one help me out in this situation? Is there any way possible to retrieve the data? It€™s really important for me.
Thanks in advance. I will be looking forward to you guys reply.
/Adil
I need help ASAP!
For some reason, we lost a dozen of our tables with valuable data. could be a virus or something that cleared out our data.
The last backup we have is last night at 11PM. If we recover from that backup, all the users lose all of today's work!
Is there a way I can just roll back the transactions from today?????!
I'd really appreciate any help urgently
Joyce
Hi all......well ill try and explain what I dont understand :-(
I am completely new to SQL. I have downloaded SQL Server Express 2005. I guess I need to download another program now like SQL Query Analyaer so that I can query a database - can anyone recommend a free download that will do the job?? I had a play around with one that I downloaded but to be honest, I have no idea on how to get the two programs talking.
Is someone able to guide me through how to initially set up SQl Server and how to get evrything working??
Much appreciated :-)
Gavsta
I get multiples of one record. i dont want multiples. but i need to have all the records that are the latest and i dont know how. can you help me.
thanks
SELECT TOP 1 [sn].[WrkstaId]
,[sn].[Computer Model]
,[sn].[Serial Number]
,[sn].[Asset Tag]
,[sn].[Computer Type]
,[id].[Name]
,[id].[Domain]
,[id].[OS Name]
,[id].[OS Type]
,[id].[Last Logon User]
,[id].[Last Logon Domain]
,[id].[Client Date]
,[pu].[_id]
,[pu].[Month]
,[pu].[User]
FROM [Altiris].[dbo].[AeXInv_AeX_HW_Serial_Number] sn INNER JOIN [Altiris].[dbo].[AeXInv_AeX_AC_Identification] id
ON [sn].[WrkstaId]=[id].[WrkstaId]
INNER JOIN [Altiris].[dbo].[AeXInv_AeX_AC_Primary_User] pu
ON [sn].[WrkstaId]=[pu].[WrkstaId]
WHERE [sn].[WrkstaId]=(SELECT MAX([WrkstaId]) FROM [Altiris].[dbo].[AeXInv_AeX_HW_Serial_Number]
WHERE [Serial Number]='68659')
ORDER BY [pu].[_id] DESC
68659Latitude D62028LGGD1Data not accessiblePortableWL-28LGGD1AZCORPMicrosoft Windows 2000Professionaluswclh04AZCORP2008-01-16 17:20:37.000864649Januaryuswclh04
68659Latitude D62028LGGD1Data not accessiblePortableWL-28LGGD1AZCORPMicrosoft Windows 2000Professionaluswclh04AZCORP2008-01-16 17:20:37.000864648Decemberuswclh04
After much hard work and effort I finally got SQL Server downloaded and opened. I am at a lost since the "Dummies" books, SQL & SQL Servier 2005 Reporting Services, I have don't (I can't find or understand) explain what I am trying to do. I have been able to create a couple of table, but can't see them. I can see the queries but not the actual table unless I run a query. How can I open the table it self?
Would to import an Access table in the SQLEXPRESS but can't figure out how. Can I get some guidence?
Any help I can get would be helpful. Thank you in advance.
CarLost48
Hello,I am using visual studio express edition. I making a nice website that uses the ASPNETDB.MDF for all those cool asp 2.0 membership and roles stuff.. This uses a SQL express database. OK so far. I have tried and tried to get my website live so I can further test it, but I can't People have been helpful, escpecially Bruce from this forum. I need more than help I guess. I really need to get this website up. Can someone please tell me where I can go to hire someone who will talk me through this process. I am not a programmer, I am a hobbyist. I understand SQL to select and update my database, but I can't do the stuff I read in FAQ's. It seems to be written for professionals. I have tried 3 different hosting services none seem to work. Please someone send me a private msg. we can work out terms. I am sure with someone over the phone that knows sql express and visual web developer expres will have me up and running in a jiffy. I can send payment via paypal.Jason
View 1 Replies View RelatedThis procedure is missing one importent piece is I need to have a customerID added to the invoice table. The CustomerID comes from another table called Customer_Invoice_cart. I don't know how to convert Customer_Invoice_Cart.CustomerID to a @CustomerID to add to the table. If there is anyone out there who is good at stored procedures (unlike me who is learning) could help me out. FYI I realy cannot get the CustomerID for the .aspx page, it is not called any where.
procedure [dbo].[InvoiceAdd]( @EmployeeID int, @CartID nvarchar(50), @OrderDate datetime, @OrderID int OUTPUT)AS
BEGIN TRAN AddInvoice
/* Create the Order header */
INSERT INTO invoice( employee_number, invoice_date)VALUES( @EmployeeID, @OrderDate)
SELECT
@OrderID = @@Identity /* Copy items from given shopping cart to OrdersDetail table for given OrderID*/
INSERT INTO invoice_books( invoiceID, ProductID, TaxID, Quanatity, UnitCost, UnitPrice )
SELECT @OrderID, Inventory_Invoice_Cart.InventoryID, Inventory_Invoice_Cart.TaxID, Inventory_Invoice_Cart.Quanity, products.UnitCost, products.UnitPrice FROM Inventory_Invoice_Cart INNER JOIN products ON Inventory_Invoice_Cart.InventoryID = products.ProductID
WHERE Invoice_CartID = @CartID
INSERT INTO invoice_books( invoiceID, ServiceID, Service_TaxID, Service_Quanatity, ServiceCost)
SELECT @OrderID, Service_Invoice_Cart.ServiceID, Service_Invoice_Cart.TaxID, Service_Invoice_Cart.Quanity, services.price_leval1FROM Service_Invoice_Cart INNER JOIN services ON Service_Invoice_Cart.ServiceID = services.serviceID
WHERE Invoice_CartID = @CartID
/* Removal of items from user's shopping cart will happen on the business layer*/EXEC Customer_Invoice_Cart_Empty @CartIDEXEC Inventory_Invoice_Cart_Empty @CartIDEXEC Service_Invoice_Cart_Empty @CartID
COMMIT TRAN AddInvoice
What is the quivalent of EM for SQLExpress2005? With the old SQL 2000 I used EM to manage tables, SPs and such. Now, I cannot even find the databases - I installed the Club Starter Kit and I want to view and modify some tables. How do I do that?
View 3 Replies View RelatedHello all let me first start out by saying I suck at SQL. I can do quite a bit with ASP.NET but SQL Server is on area that has haunted me and I have finally decided to bite the bullet and figure this behamouth out.Well here is my first problem, which is the biggest reason I can't seem to understand SQL Server or dataases in general.To have a realtional database you set up tables with foriegn keys and primary keys referenceing the id's like product table has a product name and one of the columns is a user_id displaying the id number of the user in the user table. From what I can tell you are supposed to set up the user_id in the products table a foriegn key to the Primary Key in the user table. I may be totally wrong on this though.Now my biggest question is how do you retrive this information the proper way to get it ready to be displayed in a gridveiw or a datalist? I have been reading SQL Server 2005 for developers and reading online tutorials and it seems like they say you need to set up a relationship and because of the realtionship you don't need to do a join, but I never hear how to use the relationship at all.Please someone help I am so totally lost that i feel like i will never understand. I have spent the last week trying to figure this out and I guess I am just googleing this wrong completely or i am incompentent one of the two.Thank you.
View 1 Replies View RelatedHello all,
My company took over a project that another company was building. The other company switched all the passwords for the system and the database right before they left. No one has the passwords to the system or the database. Is there a way I can dump the data, or re-mount the drives into a different machine and get the data? Or am I just screwed? I have physical access to the machine and I can do anything needed I just need this data asap!!
TIA
Sean Silvius
Hi, maybe someone has some clues to the following situation. Suppose from a SQL 7 database, only the log .ldf files are lost. All datafiles are present. Suppose there is no backup of this database. SQL Server will put the database in the SUSPECT status. The following question is very interesting to me: Can one recover from this situation??? I ask this, because when datafiles are lost, it's obvious that you have lost data, but since the transaction log files are a "bit special", I just wonder how one can survive such a situation.
I know that IF a database has only ONE log file associated with it, and this one log file gets lost, SQL Server will create on startup a new log file. But with multiple log files, it does not behave in this sympathic manner. Is there perhaps any way to recover (for example, an undocumented dbcc command or so) ?
I surely will appreciate any tip or suggestion !! Thanks!!!