Delpoyed Task Hangs On Executing

May 12, 2008

I have a task thet writes to an Oracle database.It works correctly from my development machine, but when I run it from the SQL Server it hangs on "Execute". I installed the Oracle Client on the server and tested it by making an ODBC connection and testing the connection. The task sat on "Executing" for 6 hours before I manually stopped it. It should only take about 1 minute or less. There are no errors in the history log. Does anyone have any suggestions on what I can do to determine why the task hangs on "Execute".


View 3 Replies


SSIS Hangs Executing SP...

May 23, 2008

I have a stored procedure which when executed from management studio completes successfully.
If I invoke the stored procedure from SSIS which in turn is called from a SQL Server job the jobs runs indefnitely.

Now I wanted to see how far did it go in the execution of sp and I had some logging done at various places in stored procedure....It came till the RETURN 0 , the last statement of sp. The call to the SP is the last task in the SSIS package...So if the sp is alsmost completed and execute sql task is the last one in SSi, why is the job running indefinitely.

Please help....MVPs....

View 1 Replies View Related

Executing Stored Procedure... Hangs...

Oct 2, 2007

I have a stored procedure in SQL Server 2005. It make a backup of a database and restores it to a different name.I use ASP.NET and Framework 1.1.It works really fine when I use SQL Server 2000.
But!When trying to do the same thing on SQL Server 2005, the database seems to be created "half way" I can see that the database is created, but after the name is the text Restoring....It never finish restoring.... and nothing shows in the server logs.
Any ideas?Differences between SQL Server 2000 and SQL Server 2005 that I must be aware of?Priviliges?ConnectionString parameters?Drivers?
I'm using .NET Framework 1.1ODBC (SQL Native Client)
Here is the Store procedure code:set ANSI_NULLS ON
 ALTER PROCEDURE [dbo].[CreateProjectDataBase]
@AFModelDatabaseProject varchar(200),
@TemplateDbBackupFileAndName varchar(200),
@DatabaseName varchar(200),
@DataFilePathAndName varchar(200),
@LogFilePathAndName varchar(200)
BACKUP DATABASE @AFModelDatabaseProject TO DISK = @TemplateDbBackupFileAndName
RESTORE DATABASE @DatabaseName FROM DISK = @TemplateDbBackupFileAndName
WITH MOVE 'AdressTNG_Project_Data' TO @DataFilePathAndName,
MOVE 'AdressTNG_Project_Log' TO @LogFilePathAndName
and here is how it is called from within .NET:this.odbcCreateDataBaseCommand.CommandType = System.Data.CommandType.StoredProcedure;
this.odbcCreateDataBaseCommand.Parameters["@AFModelDatabaseProject"].Value = afModelDataBaseName;this.odbcCreateDataBaseCommand.Parameters["@TemplateDbBackupFileAndName"].Value = TemplateDbBackupFileAndName;
this.odbcCreateDataBaseCommand.Parameters["@DatabaseName"].Value = dbName;this.odbcCreateDataBaseCommand.Parameters["@DataFilePathAndName"].Value = DataFilePathAndName;
this.odbcCreateDataBaseCommand.Parameters["@LogFilePathAndName"].Value = LogFilePathAndName;this.odbcCreateDataBaseCommand.CommandText = "{ CALL CreateProjectDataBase(?,?,?,?,?) }";

View 2 Replies View Related

SQL Express 'hangs' When Executing An INSERT

Feb 14, 2008

Periodically an INSERT query takes anywhere from 30 to 90 sec's to execute. But once it completes, execution times then return to 0 or 1 sec. This has begun to occur more and more frequently, typically every thirty minutes or so now.
The only way I have found to clear the problem is to execute the INSERT from SQL Studio and just wait for it to complete. Then everything returns to normal, until it hangs again. The application that commands the INSERT can not be made to just wait for 90 seconds, so I need to know how to eliminate the intermittent delay.
What could be causing this problem, and how can it be corrected?

View 5 Replies View Related

Integration Services :: Executing SSIS Hangs

Apr 29, 2015

I created a SSIS package which loads CSV into database. The package is called in a C# console application which is set as scheduled task in a server. The problem I having is that the package hangs during validation stage: "Truncation may occur due to inserting data from data flow column "Reading Type" with a length of 50 to database column "ReadingType" with a length of 2."There is no problem loading same data from development machine.

View 5 Replies View Related

Visual Studio Hangs When Executing A Package (also DTEXEC)

Oct 31, 2007


We have a problem with visual studio. It hangs when i use the "execute package" option. New packages are running correctly but the packages which i've already built are not executing anymore...Any ideas to get things on track again?


View 2 Replies View Related

Execute SQL Task Hangs...

Mar 21, 2007


I'm having a problem with one 'Execute SQL Task' calling a stored proc...

The problem is that once the stored proc has finished executing after 10 mins (I know it has thanks to an audit log table entry ), the SSIS task carries on hanging for another 20mins before it gets the task execution result and moves to the following task.

I tried:

- adding/removing a return statement at the end of the stored proc. It doesn't solve the problem

- running the package without debugging and outside visual studio, and I'm still getting the same problem. so it's nothing to do with the debugger...

- tried various settings for the transaction and isolation settings... not getting any better

- changed the stored proc so that it processes less data. Execution time goes down to a couple of minutes and the SSIS tasks only hangs for 2 mins... better but not really helping...

Any clues? I'm new to SSIS so I must have certainly missed something!


View 4 Replies View Related

Process Task Hangs Running Bcp

Jun 26, 2006

We are attempting to use Microsoft SQL Server Integration Services Designer
Version 9.00.2047.00 to run a BCP command from a Process task. We are able to do so without a problem when running it interactively, but when run as a SQL Server Agent job the bcp process never completes and the job hangs indefinitely.

We also tried using a Script task for this, with the same result.

Has anyone else run into this problem?



View 7 Replies View Related

Executing A Task With In Script Task

Jun 25, 2007

How can I execute a sql task from a script task. Both these tasks are part of the same package. The script task is actually part of the error handler. The execute sql task is part of control flow in the package.


View 4 Replies View Related

DTS Hangs When Editing Data Transfer Task To Oracle

Feb 5, 2003

I have several DTS packages that connect to various Oracle databases. An upgrade has recently been done to one of the databases from 7.3 to 8i. The other databases were always 8i. Last week, I could edit data transer tasks normally, this week, DTS hangs and I have to use task manager to kill the process. It worked fine last week. I can successfully run the packages, I just can't edit them. I have no trouble editing or running packages that connect to databases other than the one recently upgraded. I have tried both OLE DB and ODBC connections with the same results. Does anyone have any ideas on how to fix this?

View 4 Replies View Related

SQL 2012 :: SSIS Script Task Hangs When Trying To Download Missing File From A URL?

Oct 12, 2014

I have an SSIS package that inserts website URLs from a SQLServer table into a variable used by an HTTP Connection Manager, then downloads the data files from those URLs using a ForEach Loop and a Script Task. Works beautifully when a data file is found at the URL, but hangs if no data file is found. I've set the Timeout property on the HTTP Connection Manager to 30 seconds, but doesn't work. how to first check if a data file exists, of if the request returns nothing, or how to trap this situation in a try-catch?

Here is the VB code I'm using in the Script Task:

Public Sub Main()
' Connect to website using HTTP connection manager
Dim nativeObject As Object = Dts.Connections("HTTP Connection Manager").AcquireConnection(Nothing)
' Create a new HTTP client connection
Dim connection As New HttpClientConnection(nativeObject)


View 0 Replies View Related

Integration Services :: SSIS Package Hangs On Validation Of Single Task In Visual Studio

Jun 16, 2015

I've built an SSIS package in SSDT 2014. The package was running successfully

When I close and open the package it hangs on validation of single task out of all.


I have tried several times to close the SSDT and open but facing same issue.

These seems like bugs in SSIS/SSDT. What would cause the relocation of some script code to hang the validation process like this?

View 2 Replies View Related

Executing SQL Task And Variables

Nov 20, 2007


I'm trying to run a statement against all of my servers - I've got about 10 statements working, but am having trouble with this one. It's in a for loop with a connection that is changed by a recordset which is a list of my servers. Here is the code - In the step before, I've created the tempdb.dbo.DBROLES table.

Code Block
declare @dbname as varchar(200)
declare @mSql1 as varchar(8000)
select '[' + name + ']'
from master.dbo.sysdatabases
where name not in ('mssecurity','tempdb')
Order by name
OPEN DBName_Cursor
Set @mSQL1 = 'Insert into tempdb.dbo.DBROLES ( DBName, UserName, db_owner, db_accessadmin,
db_securityadmin, db_ddladmin, db_datareader, db_datawriter,
db_denydatareader, db_denydatawriter )
SELECT '''+ @dbName +''' as DBName ,UserName, '+char(13)+ '
Max(CASE RoleName WHEN ''db_owner'' THEN ''Yes'' ELSE ''No'' END) AS db_owner,
Max(CASE RoleName WHEN ''db_accessadmin '' THEN ''Yes'' ELSE ''No'' END) AS db_accessadmin ,
Max(CASE RoleName WHEN ''db_securityadmin'' THEN ''Yes'' ELSE ''No'' END) AS db_securityadmin,
Max(CASE RoleName WHEN ''db_ddladmin'' THEN ''Yes'' ELSE ''No'' END) AS db_ddladmin,
Max(CASE RoleName WHEN ''db_datareader'' THEN ''Yes'' ELSE ''No'' END) AS db_datareader,
Max(CASE RoleName WHEN ''db_datawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_datawriter,
Max(CASE RoleName WHEN ''db_denydatareader'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatareader,
Max(CASE RoleName WHEN ''db_denydatawriter'' THEN ''Yes'' ELSE ''No'' END) AS db_denydatawriter
from (
select as USERName, as RoleName
from ' + @dbName+'.dbo.sysmembers a '+char(13)+
' join '+ @dbNAme+'.dbo.sysusers b '+char(13)+
' on a.memberuid = b.uid join '+ @dbName +'.dbo.sysusers c
on a.groupuid = c.uid )s
Group by USERName
order by UserName'
--Print @mSql1
Execute (@mSql1)
FETCH NEXT FROM DBName_Cursor INTO @dbname
CLOSE DBName_Cursor

failed with the following error: "Must declare the variable '@dbName'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

Task failed: Put dbroles into table

The program '[10320] DBA_Repository_Load (1).dtsx: DTS' has exited with code 0 (0x0).

I'm going to try creating the procedure on each server - that will probably work - I just don't get why it's not recognizing that variable. The line it is referring to is FETCH NEXT FROM DBName_Cursor INTO @dbName. Thanks for any info on this!

View 3 Replies View Related

Current Executing Task

Dec 8, 2006

Hi everyone

I'm trying to write a monitoring application for SSIS packages deployed on my machine. I know I can look at running packages via the DtsRuntime.Application object's GetRunningPackages method. Does anyone know if there is any way one can view tasks in that package that are currently being executed?



View 4 Replies View Related

Need Help Executing A Proc In Execute SQL Task

Jan 12, 2008

I am trying to use an Execute SQL Task to execute a stored procedure with parameters in SSIS but it keeps giving me errors, for example I type in 'exec someproc ?, ?, ?' in SQL Task it wouldnt parse correctly and when I set the bypassPrepare to 'true' the package runs but gives me error at the destination saying couldnt find stored procedure 'someProc'.

Does anybody know how I can solve this problem?

Also how do I pass the results of the queries in the Execute SQL Task into the Data Flow Task? The proc is supposed to retrieve data and transform them into XML format to be placed at a XML file. I am not sure if I should used an OLEDB source or an XML source since the data has been transformed into XML. Any help will be greatly appreciated.

Please note proc runs fine when it does not have any parameters.

View 8 Replies View Related

Not Executing SSIS SQL Task By Passing Variable

Jun 11, 2008


I am creating SSIS package which using Execute SQL Task to which I am supplying one .sql file code is

delete from Test where ID = @ID

I defined @ID variable to SSIS and also path where .sql file placed but i am not able to execute this package i am getting error like can not find C:@Path file......

As i got information that passing such variable to .sql you need connection so I changed SQLSERVER Database connection string to .... after that when i set hard core value for these variable i.e for @ID and @Path then it runs sccessfully but by setting parameter i am getting above error

Any suggestion that will be gr8 help for me


View 2 Replies View Related

Error Executing Xp_cmdshell From Within A SQL Task In A DTS Package...

Jul 20, 2005

HelloI am trying to execute xp_cmdshell' from within a DTS package thatwas created by another person. When I try to execute that SQL Task'selectively from within the package, I get the following errormessage:Error Title: Package ErrorError Details:Error Source: Microsoft OLE DB Provider for SQL ServerError Description: xpsql.cpp: Error 87 from GetProxyAccount on line604Why is this error message popping up? When I create a new package(myself) and create an exact same SQL task as above and run it, theSQL task runs fine.Appreciate any help / feedback.Thanks in AdvanceJagannathan Santhanam

View 1 Replies View Related

Executing Backup Script With Task Scheduler

Dec 20, 2007


I had configured a backup operation with SQL Server Express 2005 and saved the operation as a .sql file. I then configured a task with Task Scheduler to execute this .sql file at a specified time. The text in the Run box for this task is:

"C:Program FilesMicrosoft SQL Server90ToolsBinnSQLCMD.EXE" -S .SQLEXPRESS -i"C:Program FilesMicrosoft SQL ServerFull_M-Th.sql"

I verified this .sql file would run a backup by launching Management Studio Express, opening the file, and then clicking the Execute button. Minutes later, I had a backup. Yet the scheduled task did not run, nor would it run when I manually chose to run it from the list of scheduled tasks. I looked in the Event Viewer, but could not find anything that tipped me off to what I am not doing correctly. If anyone can tell me what might be wrong with the command I pasted above, it would be appreciated.

Thanks for reading!

View 4 Replies View Related

Data Flow Task Within For Each Loop Not Executing

Aug 22, 2007

I am sure I am missing something really silly but I am not able to figure out what. The For Each Loop uses an ADO Enumerator and passes variable values to a data flow. In executing the package the loop runs fine but nothing is happening to the data flow. When I move the data flow out of the loop it runs fine. What is going on?



View 14 Replies View Related

Executing A Stored Proc On Another Server From A Scheduled Task

Jul 20, 2005

Ok, I thought this one would be easy.I have a stored proc: master.dbo.restore_database_fooThis is on database server B.Database server A backs up database foo on a daily basis as a scheduledtask.What I wanted to do was, at the end of the scheduled task is then call thestored proc on B and restore the database.If I go into Query Analyzer and log into database A, then execb.master.dbo.restore_database_foo works.But if I take the same command and make it part of the scheduled task itfails.Error is:OLE DB provider 'SQLOLEDB' reported an error. [SQLSTATE 42000] (Error 7399)[SQLSTATE 01000] (Error 7312). The step failed.To me this seems like a permissions issue, but nothing I've tried seems tohave helped.Suggestions?----Greg D. MoorePresident Green Mountain SoftwarePersonal:

View 3 Replies View Related

Problem Executing A Oracle Procedure Using Execute Sql Task

Oct 18, 2006

Hi All,

I am trying to execute a Oracle Procedure through Execute Sql Task but it keeps throwing back an error ORA:00900. Is it possible to execute the procedure from this object? Do I need to use the script task to execute this. If yes then how?

Any help would be appreciated.

Thanks in advance.


View 2 Replies View Related

Executing Stored Procedure With Parameters Using Execute Sql Task

Jul 12, 2006

Hi ,

I am trying to exectue a stored procedure through execute sql task which takes two input parameters table name and filegroup to create a table and it also returns a value.

i am using the oledb connection

but i am getting the following error

[Execute SQL Task] Error: Executing the query "declare @rtn_value int exec spm_Utopia_FinanceUsage_Create_MonthlyTable ?,? select @rtn_value as rtn_value " failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

i tried with connection by directly giving the parameter names.

it will create a table but the the table name is something different from what i specified

Please do help as soon as possible



View 2 Replies View Related

Timeout Error When Executing SQL Command From The Script Task

Apr 18, 2008

The SQL query takes about 4 minutes to execute in SQL Management Studio. But when I run it from the Script Task using the OleDBCommand, I got the timeout error in 40 seconds. The timeout setting on the SSIS DB connection is 0. I do not see how to set the timeout for an SSIS task. Any thoughts on this problem? TIA.

View 8 Replies View Related

How To Programmatically Detect The Failed Task After Executing The Package

Apr 27, 2007

SSIS Experts,

I am executing a child package programmatically and want few lines of code to detect cause of the failure on the fly. One way will be to run the child package through dtexec command uility. But on the fly i will be assigning few values in Parent package variable to the child variables and finally run the child package. Since we cannot apply expressions or use precendence constraints in place, It seems that we are left with only choice to programmatically detect errors in tasks. In DTS, it was achieved this way:

Code Snippet

For Each ostep In oPkg

If ostep.ExecutionResult = DTSStepExecResult_Failure Then

ProcessSubDTSPackage = DTSTaskExecResult_Failure

End If



Subhash Subramanyam

View 4 Replies View Related

Executing A Batch Script From Execute Process Task

Aug 22, 2006


I have an "execute process" task which executes a perl script. When I run the task, it shows a prompt with the message "the publisher can not be verified". It gives the option to continue the task or to cancel.

The problem for me is that I want to schedule this package to run automatically, and I don't want the automated process to show this dialog. I need to override the security setting and have SSIS execute my batch scripts without prompting. Assuming I don't want to rewrite the Perl code into a script task, is there a way to do acomplish this?



View 2 Replies View Related

Executing MAXL Scripts In Execute Process Task

Jul 20, 2007


first of all a few words about our achitecture:

we have a windows 2003 server with sql sever 2005 and connect on this server with 3 clients (Visual Studio) on the Windows 2003 Server there is also an Hyperion Essbase Server installed.

In the Visual Studio I try to execute a batch script which is located on the server. But how i develop that? I have tried to rebuilt the servers File structure and save the Package on the Server. < didn't worked

My Question how can I make a package in which I execute a bat file which is located on the Server without developing it on the Server?

Thank you in advance!

View 1 Replies View Related

Executing An SSIS Package Containing A Data Mining Query Task From A SQL Job

Mar 28, 2007

Hi, I'm new to this forum, so please bare with me.

I've created a mining model, i've tweaked it etc and i'm now happy with the results its producing. I'm now looking to automate the processing and exporting of the results of the model i've done this simply by creating an SSIS package with two tasks, one task being to process the model the other task is a Data Mining Query task.

This package works fine in visual studio and when i deploy it to the server.

The problem i'm having is when i then try to execute the package from a job, after a bit of investigating i have tracked it down to the Encryption of "sensitive" properties. By default the encryption is based on UserKey which is why the package works for me when i execute it from VS or even the server, but when the job trys to execute the package running under the sql agent account it fails.

Looking at the security options i have for packages, i can either DontSaveSensitive, EncryptSensitiveWithUserKey or EncryptSensitiveWithPassword plus a few others.

DontSaveSenstive is clearly not an option as this just creates an unusable package.

EncrptSensitiveWithUserKey doesn't seem to be an option as the job runs under the SQL Agent account (also i'm thinking that the UserKey that the encryption is based on also incorporates other factors related to my profile that i can't impersonate? i might be wrong though)

EncryptSensitveWithPassword seems to be an option except that i can't get this to work either, there doesn't seem to be anyware in the job step to give it the password information.

Its frustrating me now because i've fallen at the very last hurdle, if anyone else has experienced this problem and knows how to resolve it that would great.



View 3 Replies View Related

Reg: Executing And Passing Arguements To Exe Using SSIS Execute Process Task

Apr 22, 2008


Can any one give me a solution how to call exe. Also, i need to pass 1 input to that exe.
I tried using Execute process task but it is not working.

My task is:

I have DFT , it generate a output file then after the output file generated i need to upload it SharePoint server.
So i developed one .exe using .net, C#. ( it is running fine when cmd line)

But i want to embbed in SSIS package.

Like :

DFT ( DataFlowTask) --------------------> OutPutFile.txt

EPT ( ExecuteProcessTask) ----------> Upload it to SharePointPortal.

Kindly give the solution ASAP.


View 4 Replies View Related

Map Resultset From Executing A Stored Proc Into Input Columns Of A Data Flow Task

Jul 30, 2007

I need to loop the recordset returned from a ExecuteSQL task and transform each row using a Data Conversion task (or a Script Task).

I know how to loop the recordset returned by an ExecuteSQL task:

I loop the returned recordset (which is mapped to a User variable of type System.Object) and assign the Variable Mappings in the ForEach Loop to different user variables which map to the Exec proc resultset (with names and data types).

I assume to now use these as the Available Input columns for the Data Conversion task, I drag a Data Flow task inside the For Each Loop container and double-click it, then add a Data Conversion task.

But the Input columns (which I entered in the Variable Mappings in the ForEach Loop containers) dont show up in the Available Input columns of the Data Conversion task.

How do I link the Variable Mappings in the ForEach Loop containers from the recordset returned by the Execute SQL Task to the Available Input columns of the Data Conversion task?


If this is not possible, and the advice is to use the OLEDB data flow as the input for the Data Conversion task (which is something I tried too), then the results from an OLEDB Command (using EXEC sp_myproc) are not mapped to the Available Input columns of the Data Conversion task either (as its not an explicit SQL Statement and the runtime results from a stored proc exection)

I would like to use the ExecuteSQL task to do this as the Package is clean and comprehensible. Which is the easiest best way to map the returned results from a Stored proc execution to the Available Input columns of any Data Flow transformation task for the transform operations I need to execute on each row of data?

[ Could not find any useful advice on this anywhere ]

thanks in advance!

View 4 Replies View Related

Integration Services :: Oracle Procedure Is Not Returning Results When Executing From Script Task On SSIS

Jul 13, 2015

I'm executing Oracle procedure, which has three OUTPUT parameters and returns results in table type variable. i should not use ODBC, MSDAORA providers to call the procedure. So I'm planning to using Oracle OLEDB provider. I'm able to execute the procedure successfully, but when i do check (while dr.Read()) its not returning any records. But I know as per stored procedure results, it should return 66 records.

Dim conn As New OleDbConnection
Dim cmd As New OleDbCommand
Dim dr As OleDbDataReader
Dim QSQL As String


View 10 Replies View Related

Execute SQL Task: Executing The Query Exec (?) Failed With The Following Error: Syntax Error Or Access Violation. Possible F

Jan 23, 2008

I'm having an SSIS package which gives the following error when executed :

Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server

The package has a single Execute SQL task with the properties listed below :

General Properties
Result Set : None

ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False

Parameter Mapping Properties

variableName Direction DataType ParameterName

User::AddLinkSql Input Varchar 0

'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'

When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"

I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.

I would appreciate if anybody can help me out of this issue by suggeting where the problem is.

Thanks in Advance.

View 12 Replies View Related

Stored Procedure Executing Durations Are Different Between Executing From Application(web) And SQl Server Management Studio - Qu

Jan 24, 2008


I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query window

Please see the image through this url

Any ideas for this issue?

Thanks a lot

View 1 Replies View Related

Stored Procedure Executing Durations Are Different Between Executing From Application(web) And SQl Server Management Studio - Query Window

Jan 23, 2008

Hi,I have a web application using Stored Procedure (SP). I see that there's a SP taking long time to execute. I try to capture it by Profiler Tool, and find out that with the same SP on the same db with the same parameter. The duration of executing by my web app is far bigger than the duration of executing on SQl server management studio - query windowPlease see the image attached Any ideas for this issue?Thanks a lot Jalijack 

View 2 Replies View Related

Copyrights 2005-15, All rights reserved