Displaying Values For Multi-value Parameter
Dec 15, 2007
At the top of my report, if I want to display the selected value for a given
parameter, I can put this expression in a text box:
="The xyz param's value is: " & Parameters!paramXYZ.Label(0).ToString
How do I go about displaying all the selected values for a multi-value
parameter (one that has mulitple checkboxes in the drop-down list)? Is it
possible to do a for loop and iterate through the values of the param within
an expression? Something like
for i = 0 to Parameters!paramXYZ.Count - 1
mystring = mystring & ", " & Parameters!paramXYZ.Label(i).ToString
And then display mystring in the textbox? Or can I use a list control on the
report?
Thank you,
View 4 Replies
ADVERTISEMENT
Sep 28, 2007
Hi All
New user here. I've got a report with a couple of multi-value parameters and I'm displaying the selected values on the report using = Join(Parameters!ReportingGroup.Value, ", "). This works properly.
The users now want the report to display "All" if "Select All" is chosen, rather than showing the whole list.
Can anybody help me with this? I'm thinking of using an IIF statement in my expression, but have no idea how to define the condition?
Thanks in advance
Grant
View 3 Replies
View Related
Jan 22, 2007
Hi All,
Is there is any way to display the User selected parameter information if the parameter is multiselect ?
I was able to display if the parameter is single valued but if it is multivalued (list), i was not able to .
Any help is greatly appreciated.
Regards,
View 8 Replies
View Related
Apr 11, 2008
I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
View 1 Replies
View Related
Oct 16, 2006
Is it possible to pass values from UI to a multi-value parameter in a report and from this report, select values from this multi-value parameter to finally display data?
Thanks!
View 5 Replies
View Related
Jul 12, 2007
I have a parameter that gets it's available values from a dataset.
I use this exact same data to populate the default values.
When I run the report, the available values get populated; however the default values are not being selected.
This works on other parameters on the same report. However, on this parameter, it is not working.
I have tried ltrim/rtrim (Been burned with that before when the field type is a char)
I change the data field in the query, without changing the parameter setup, and it works...
Here is my query:
Code Snippet
Select distinct
CityName
from dimHotel dH (NOLOCK)
Inner join factHotel fH (NOLOCK)
on dh.HotelKey = fH.HotelKey
Where dH.CityName <> ''
and dH.CityName is not null
and fH.ClientKey in (@ClientID)
Order by CityName
The parameter is setup correctly, and matches the setup of another parameter on the same report that is working fine.
I have tried deleting the parameter and re-adding it. This did not work.
I also deleted and re-added the query. No luck.
Any ideas??
Thanks!!
Thanks
View 3 Replies
View Related
Sep 29, 2015
i design SP for insert data in 2 tables i need to store list of array in one parameter to complete my query i try the table value but it`s not good for me because table value is readonly and i need to insert data with list of array .....
View 5 Replies
View Related
Feb 15, 2007
How does one return all selected values in a multi-valued parameter? Right now i have a filter on the dataset where
(Expression)
=Fields!LOCATION_ID.Value
(Operator)
=
(Value)
=Parameters!Loc.Value(0)
This is just giving me data from the first value that is selected in the multi-valued dropdown. I need all returned from the parameter. Any ideas.
View 4 Replies
View Related
Apr 16, 2013
I got issue when passing multiple values to a single parameter. Here is my stored procedure as following:
CREATE PROCEDURE [dbo].[School]
@Grade AS varchar(50),
@Class As varchar(50)
AS
BEGIN
SELECT Name, Grade, Class
FROM School
WHERE Grade = (IsNull(@Grade, Grade)) AND Class IN (IsNull(@Class, Class ))
END
In the front end, I got multiple values for Subject parameters such as Math, English, Reading, etc... in a specified class. How do I can modify my above stored procedure to receive multiple values for a single parameter.
View 14 Replies
View Related
Apr 21, 2008
Hi there,
I have a problem with multi-value parameter in ReportingServices2005, hope to find a solution here.
if I use ordinary parameter in a report(multi-value checkbox is not selected), after deployment I can click on drop down list and type possible value of that parameter using keyboard(it will be selected from what i typed).
if I use multi-value parameter somewhy it doesn't respond to anything i type from my keyboard.
Why is that?
What should i do to make that multi-value parameter select possible result from what i type?
View 4 Replies
View Related
Jul 8, 2015
how to handle space between multi-value parameter values in SSRS. For e.g. if the values are as follows -'KLO LUG', 'HGY KIU', 'LOT JUY', I know I can use the split function for the commas but its the space between the value which is the problem.
View 3 Replies
View Related
Apr 14, 2008
I understand that Multi-Select Parameters are converted behind the scenes to an In Clause when a report is executed. The problem that I have is that my multi-select string parameter is turned into an in claused filled with nvarchar/unicode expressions like:
Where columnName in (N'Value1', N'Value2', N'Value3'...)
This nvarchar / unicode expression takes what is already a fairly slow-performing construct and just drives it into the ground. When I capture my query with Profiler (so I can see the In Clause that is being built), I can run it in Management Studio and see the execution plan. Using N'Values' instead of just 'Value1', 'Value2','Value3' causes the query performance to drop from 40 seconds to two minutes and 40 seconds. It's horrible. How can I make it stop!!!?
Is there any way to force the query-rewriting process in Reporting Services to just use plain-old, varchar text values instead of forcing each value in the list to be converted on the fly to an Nvarchar value like this? The column from which I am pulling values for the parameter and the column that I am filtering are both just plain varchar.
Thanks,
TC
View 3 Replies
View Related
Jul 7, 2015
There is a multi value parameter called "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values will get displayed on the report based on the visibility condition set in the report.Example : If first value is selected then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4 and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
View 3 Replies
View Related
Aug 10, 2015
I am using report builder 3.0.
I have a report parameter called para1 which is a drop-down list and what I want to do is display another report parameter based on the para1 selection.
So for example, para1 contains a, b, c choices. if a user selects b, I would like para2 to display but if the user selects a or c, I don't want the para2 to display.
View 5 Replies
View Related
Jul 3, 2007
Hi There.
I am struggling with an issue with multi-valued parameters. I have a parameter that is a list of several hundred items and when someone selects all of them, I display the huge list in the report header vias the join command.
This works great for a few parameters, but overwrites my data when the list is large. I want to do something in the expression where I determine if all items are selected and then just display 'All' instead of the whole list. Any ideas would be very helpful!
Thanks, Mike
View 4 Replies
View Related
Jul 29, 2015
I have two report , first is main report which is matrix and have one parameter User_ids which is multi value selection and my second report is basic chart of user_wise performance.
Now, my main report (matrix ) works fine for Multiple selection of users and i have putted one textbox on main report chart which has action properties set for chart report, when user click on chart button it must goes to chart with user selected in main report. Now , i have used expression for parameter to send it like ..
=join(parameter!user_id!value,",") which pass selected value to chart
And when I am selecting single user it passing that value to chart parameter list but , when it is more than one user it errors with conversion failed when converting the nvarchar value '121,128' to data type int. But my chart also works when passing 121,128 in user parameter in preview of report .
View 2 Replies
View Related
Feb 4, 2008
I would like to be able to adjust the multi-value property of a parameter based on the value of another parameter in my report. The controlling paramter would be binary with two options for Single or Multiple selection. I would like my parameter to default to multi-value, which I can do on the screen selection. I have tried to add an IIF statement to the XML code, with no success. Any ideas would be helpful.
Thanks
View 4 Replies
View Related
Apr 28, 2008
I have a set of data for days of a Month , But on certain days there are no values recorded, I still would like to display them in my result set as NULL (if text) and 0 (If Int / Real). Can anyone please suggest suitable solution.
View 11 Replies
View Related
Nov 21, 2007
I have a chart with columns on it, and my boss wants me to display the height of each column on the chart.
Is there a way to do this? I've googled it some, and searched around in the chart properties, but I couldn't find anything.
View 1 Replies
View Related
Nov 15, 2007
Hello,
This is my issue. I have values in my table that I need to format as a percent. So when I use the FormatPercent() function, it works but if one of the records has no value for that field. It generates a #Error message in that textbox. I tried using an if statement and that didn't work either. Someone please help me with this. Any information is appreciated.
View 17 Replies
View Related
Sep 27, 2007
Hi,
I have bunch of reports that take same set of parameters. I am trying parametrize the report type so that depending on the report type selected, body should display that report when user hits "View report" button. How can I do this? Pardon me if there is an obvious solution as I am pretty new to the joys of MS Reporting Services.
Thanks a bunch.
View 1 Replies
View Related
Mar 13, 2007
Hello,
I have just developed my first full package and it has been, ahem, an adventure- but I can see the power of SSIS. I am splitting 1M rows in to up to 11 parts (therefore up to 11M rows) for several files and it takes a matter of seconds!
I have used some variables in the package and would like to see the results of these at the end of execution. They are purely for interest at the moment.
I think I can output them to a flat file, but is it possible to output them to the Immediate window at the end of execution?
I can not figure out how to have a watch on them either- is this possible? Ideally I would like a counter on screen next to my loop containers.
All of the web pages I have seen regarding debugging seem to assume that VB is being used to create the package.
Thanks,
Alan.
View 2 Replies
View Related
Oct 17, 2007
SQL Server 2005.(SP2). MS SSRS;
I want to display some numbers in the same line as a concatenated string. For example a Customer may have multiple bills. These bill numbers are displayed in separate rows. I want to display them all on the same line.
Example of current display:
Customer Bill #
ABC Company 123
ABC Company 456
ABC Company 789 etc
I want this to display as below:
Cusotmer Bill #
ABC Company 123, 456, 789, etc.
Is this possible in SSRS. Please help me with the syntax.
Thanks in advance.
View 2 Replies
View Related
Sep 17, 2007
Dear Members,
I extracted data from a flat file using SSIS package and load them into destination table. One column contains no data. Data type of that column is varchar(9). I want to display "NULL" values in that column.
I used LOOK up transformation and used the following query.
SELECT PassThroughRouting =
CASE PassThroughRouting
WHEN 'NULL' THEN 'NULL'
END
FROM EPICWareTable
But it gives a error message.
Does any body can help me?
Thanks
View 9 Replies
View Related
Apr 20, 2015
I want to set the default value of the parameter based on the query result, when the current_status parameter is set as "opened" I want a certain date value to be displayed in the next parameter (start date), if it is set as closed I want a different date value to be displayed in the next parameter (start date), so I created the dataset with the query given below and assigned the default value to the query fields start and end date, however my Report parameters are not changing as expected.
dataset query:
IF @current_status = 'Opened'
SELECT DISTINCT cast(DATEADD(yy, DATEDIFF(yy, 0, getdate()), 0) AS date) AS Start_Date1, cast(MAX(estcompletion_date) AS DATE) AS End_date
FROM <Table Name>
ELSE IF @current_status = 'Closed'
SELECT distinct cast(DATEADD(yy, DATEDIFF(yy, 0, getdate()), 0) AS date) AS Start_Date1, cast(getdate() AS DATE) AS End_date FROM <Table Name>
View 4 Replies
View Related
Feb 6, 2003
Hi,
Im having a couple of problems with SQL.
I have this query...
SELECT Band.Name, Member.Name
FROM Member
JOIN MemberOf ON Member.Mid = MemberOf.Mid
JOIN Band On MemberOf.Bid = Band.Bid
WHERE MemberOf.Instrument = 'keyboards';
which basically shows me the name of the bands who had keyboard players. I would like it to also display the names of the band who didnt have keyboard players, replacing the keyboard players name with "NULL".
so... my questions are :)
how do u get it to display the records that do not match the condition, and how do u get it to replace the keyboard players name with "NULL" when they do not match the condition.
PS. The three tables are
Band. Which has Bid as a primary key.
Member. Which has Mid as a primary key.
MemberOf. Which links these through its two foreign keys Mid and Bid.
Thanks for your help! (assuming someone does)
View 2 Replies
View Related
Oct 15, 2007
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
View 7 Replies
View Related
Aug 11, 2005
Is it possible to fill a parameter list with values based on another parameter value?
Here's what I have so far (which hasn't worked)...
I'd like to generate a report listing information for a student. The report viewer would first select a school from the first drop-down menu, and then the second drop-down menu would populate with the list of students at that school.
I have a dataset that calls a sp which returns a list of schools (SchoolID and SchoolName fields from the database table).
I have another dataset that calls a sp (with SchoolID as the parameter) which returns a list of students for that school.
Both datasets return the appropriate data when tested individually, but when I set up the Report Parameters and build the report, these errors come up...
The value expression for the query parameter '@SchoolID' refers to a non-existing report parameter 'SchoolID'.
The report parameter 'Student' has a DefaultValue or a ValidValue that depends on the report parameter "SchoolID". Forward dependencies are not valid.
...Is it possible for the reoprt to generate a list of available parameter values based on the value selected for another parameter?
Any help you can give me would be great!! Thank you
View 5 Replies
View Related
Jan 16, 2007
Hi,
In my report i have a multi valued parameter, when i view my report in the Web application with Report Viewer, The multi valued parameter is displaying in light color.Can we able to change this.
Thanks in advance
View 2 Replies
View Related
Sep 5, 2007
I have a stored procedure im passing into Reporting Services. Only problem is , What do i need to change to allow the user to select more then one value. I already know what to do on the reporting services side, but it keeps erroring with the data source IE my stored procedure. Here's the code:
Code Snippet
SE [RC_STAT]
GO
/****** Object: StoredProcedure [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY] Script Date: 09/05/2007 13:49:09 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[PROC_RPT_EXPENSE_DETAIL_DRILLDOWN_COPY]
(@Region int = Null)
AS
BEGIN
SELECT Budget_Reporting_Detail.Budget_Report_Detail_Datetime, Budget_Reporting_Detail.Budget_Report_Detail_Document_Type,
Budget_Reporting_Detail.Budget_Report_Detail_Code, Budget_Reporting_Detail.Budget_Report_Detail_Description,
ISNULL(Budget_Reporting_Detail.Budget_Report_Detail_Amount, 0) AS Actual, Budget_Reporting_Detail.Budget_Report_Detail_Qty,
Budget_Reporting_Detail.Budget_Report_Detail_Responsible, Territory.Name+'('+Code+')' as [Name], Region.Region, Round((Forecast.Budget_Amount/13),2) AS Budget,
Forecast.Budget_Type_Code, Forecast.Budget_Year, Budget_Forecast_Period,
Forecast.SalesPerson_Purchaser_Code
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget_Reporting_Detail AS Budget_Reporting_Detail RIGHT OUTER JOIN
RC_DWDB_INSTANCE_1.dbo.Region AS Region RIGHT OUTER JOIN
(SELECT Budget_Type_Code, Budget_Year, SalesPerson_Purchaser_Code, Budget_Amount
FROM RC_DWDB_INSTANCE_1.dbo.Tbl_Budget
) AS Forecast INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Territory AS Territory INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Sales_Responsible AS Territory_In_Sales_Responsible ON
Territory.Code = Territory_In_Sales_Responsible.Territory_Code INNER JOIN
RC_DWDB_INSTANCE_1.dbo.Tbl_Territory_In_Region AS Territory_In_Region ON Territory_In_Region.Territory_Code = Territory.Code ON
Forecast.SalesPerson_Purchaser_Code = Territory_In_Sales_Responsible.SalesPerson_Purchaser_Code ON
Region.Region_Key = Territory_In_Region.Region_Key ON Budget_Reporting_Detail.Budget_Type_Code = Forecast.Budget_Type_Code AND
Budget_Reporting_Detail.Budget_Year = Forecast.Budget_Year AND
Budget_Reporting_Detail.SalesPerson_Purchaser_Code = Forecast.SalesPerson_Purchaser_Code
WHERE (Region.Region_Key IN( @Region)) AND (Forecast.Budget_Year = 2007)
END
what am i doing wrong?
View 1 Replies
View Related
Jan 15, 2008
Hi:
I am building a report and have a few parameters. One of this parameters is set up as Multi-Value. When I only select one value everything is running fine. But when I select multi values I get an error saying I must declare my variable.
Any idea why this is happening?
Ben
View 3 Replies
View Related
Sep 3, 2007
hi,
i read from this forum that to pass array to report is using multi value parameter . my problem now is
1. can i pass multi dimension array.
2. how do i show the multi value parameter in a table . for example i have a multi value parameter that may contain 10 or 20 array . how do i dynamic it show in table.
rgds,
charles
View 1 Replies
View Related
Apr 30, 2007
Hi All.
I have a parameter (hidden) that gets its value using an expression base on another parameter.
When in the designer, the first time when the designer loads I can select the Parameter that controls the child parameter (expression lies in the default value section). The value changes.
When I change the parent parameter again, the value of the child parameter does not seem to change.
How can I make this parameter change automatically when the parent is changed ?
Any help will be appreciated.
Thanks,
Neil
View 3 Replies
View Related
