I have my stored procedure set to
Territory_code IN (@Territory)
, now , how do i enter in more then one value. When i select the multi value check box, it gives me more spaces. But then doesnt recognize the values when i put in more then one. am i doing something wrong?
The field is a Varchar 20
I have a parameter that gets it's available values from a dataset.
I use this exact same data to populate the default values.
When I run the report, the available values get populated; however the default values are not being selected.
This works on other parameters on the same report. However, on this parameter, it is not working.
I have tried ltrim/rtrim (Been burned with that before when the field type is a char)
I change the data field in the query, without changing the parameter setup, and it works...
Here is my query:
Code Snippet
Select distinct
CityName
from dimHotel dH (NOLOCK)
Inner join factHotel fH (NOLOCK)
on dh.HotelKey = fH.HotelKey
Where dH.CityName <> ''
and dH.CityName is not null
and fH.ClientKey in (@ClientID)
Order by CityName
The parameter is setup correctly, and matches the setup of another parameter on the same report that is working fine.
I have tried deleting the parameter and re-adding it. This did not work.
I also deleted and re-added the query. No luck.
Any ideas??
Thanks!!
Thanks
How can i enter Default Values of " " to all the columns of type characterof all the tables (excluding system tables) and Default Values of 0of all columns of type numbers. Excluding all primary key columns.Thank you
View 1 Replies View Related
I understand that Multi-Select Parameters are converted behind the scenes to an In Clause when a report is executed. The problem that I have is that my multi-select string parameter is turned into an in claused filled with nvarchar/unicode expressions like:
Where columnName in (N'Value1', N'Value2', N'Value3'...)
This nvarchar / unicode expression takes what is already a fairly slow-performing construct and just drives it into the ground. When I capture my query with Profiler (so I can see the In Clause that is being built), I can run it in Management Studio and see the execution plan. Using N'Values' instead of just 'Value1', 'Value2','Value3' causes the query performance to drop from 40 seconds to two minutes and 40 seconds. It's horrible. How can I make it stop!!!?
Is there any way to force the query-rewriting process in Reporting Services to just use plain-old, varchar text values instead of forcing each value in the list to be converted on the fly to an Nvarchar value like this? The column from which I am pulling values for the parameter and the column that I am filtering are both just plain varchar.
Thanks,
TC
There is a multi value parameter called  "include" in the report where "Allow Multiple Values" is checked and it has 4 Available values as shown in the attached screen shots and preview of the report is also shown .There is no data set for this parameter and the values  will get displayed on the report based on the visibility condition set in the report.Example : If first value  is selected  then 1 is passed and based on the visibility condition set in the report - the report output is displayed.None is default value and has value 4  and when the report is run with this option i.e. "None" then rest three parameter values are not applicable .
Requirement :
-When the end user selects (Select All) Check box then (None)
-check box must be disabled or must not appear for selection for the end user
-When the end user selects check boxes either of the first three except None then also None check box must be disabled or must not appear for -selection for the end user
-when the end user selects a combination of first three then also None check box must be disabled or must not appear for selection for the end user
-The None is set as default with a value as 4 and is applicable only when the user does not select either of the first three values and the report will run.
Hi, How can I display a value of a report parameter from one report into a textbox on another report??
View 1 Replies View Related
Hi,
I have parameters in my report. The user can choose the year, month and date (3 parameters).
Now I want to set default vaules for the parameters , so that the user sees the report for example for the current day without selecting the parameters. I tried to set the type of the parameters to DateTime and the default value for example for the year to "=Today().Year" . But when I execute the report an error occures . Something like : no validValue for this parameter.
My Attributes for the year month and date are from an Analyis Services Cube from a Server Time dimension .
Does somebody know how to make it possible to set default values for this parameters?
Other question :
Does somebody know how I can reduce the values for a parameter. For Example I have a parameter "year" from a server time dimension from a cube. The values which are available are "Year 2004", "Year 2005", "Year 2006", "Year 2007".
But I want that the user only can choose "Year 2006" or "Year 2007" ant not every Year or "All".
Or Other Example: The User should only choose a Date that is int the past or Today but not a Date in the future.
Thanks !
JF
At the top of my report, if I want to display the selected value for a given
parameter, I can put this expression in a text box:
="The xyz param's value is: " & Parameters!paramXYZ.Label(0).ToString
How do I go about displaying all the selected values for a multi-value
parameter (one that has mulitple checkboxes in the drop-down list)? Is it
possible to do a for loop and iterate through the values of the param within
an expression? Something like
for i = 0 to Parameters!paramXYZ.Count - 1
mystring = mystring & ", " & Parameters!paramXYZ.Label(i).ToString
And then display mystring in the textbox? Or can I use a list control on the
report?
Thank you,
Is it possible to pass values from UI to a multi-value parameter in a report and from this report, select values from this multi-value parameter to finally display data?
Thanks!
i design SP for insert data in 2 tables i need to store list of array in one parameter to complete my query i try the table value but it`s not good for me because table value is readonly and i need to insert data with list of array .....
View 5 Replies View RelatedHow does one return all selected values in a multi-valued parameter? Right now i have a filter on the dataset where
(Expression)
=Fields!LOCATION_ID.Value
(Operator)
=
(Value)
=Parameters!Loc.Value(0)
This is just giving me data from the first value that is selected in the multi-valued dropdown. I need all returned from the parameter. Any ideas.
We have a report that has about five different parameters. One of the parameters is a float value and we have a default value set at 999,999,999.00 and the report parameter accepts this value. The other parameter (a string) has a default value set at 0, however it is not showing up in the textbox for that parameter. The parameter is non-queried and is just a report parameter.
When we preview the report, it is there. Once we deploy the report to the report server, it is not. Now, the development machine is using SP2, but the Report Server is still at SP1. Could this be the problem? If it is, why would the float default value display and the string default value not?
Thanks for the information.
hi,
I've a int parameter but it also accepts character string value.
What can I do to fix this?
thanks,
How do I display multiple parameter values on report page from a multi-value report parameter. For example, I have a report parameter where users can select multiple attendance codes and I want them displayed at the top of the report after it's run.
Currently, only the first value is showing on the report.
Thanks.
I got issue when passing multiple values to a single parameter. Here is my stored procedure as following:
CREATE PROCEDURE [dbo].[School]
@Grade AS varchar(50),
@Class As varchar(50)
AS
BEGIN
SELECT Name, Grade, Class
FROM School
WHERE Grade = (IsNull(@Grade, Grade)) AND Class IN (IsNull(@Class, Class ))
END
In the front end, I got multiple values for Subject parameters such as Math, English, Reading, etc... in a specified class. How do I can modify my above stored procedure to receive multiple values for a single parameter.
Hi there,
I have a problem with multi-value parameter in ReportingServices2005, hope to find a solution here.
if I use ordinary parameter in a report(multi-value checkbox is not selected), after deployment I can click on drop down list and type possible value of that parameter using keyboard(it will be selected from what i typed).
if I use multi-value parameter somewhy it doesn't respond to anything i type from my keyboard.
Why is that?
What should i do to make that multi-value parameter select possible result from what i type?
I am trying to select some values as default for a parameter, I add my data set,add my parameter then I  select the values in the default pane, when I run the report I get :
'the default value expression for the query parameter contains an error[BC30451] name is not declared.
When I look at the expression of the default parameter (in the report data pane under the specify values) it appears like
=new Object() {[Sty].[ST].&[1], [Sty].[ST]..&[15]}
with a red scrible under the ()Â
I am trying to write a query for the default values for month, and I am stuck in bringing out only the parameter values, the query I have , brings back the month on row and value on column, and I am trying to get the value out. and will ssrs accept it as a valid expression for a default value
WITHÂ
MEMBER
[MEASURES].[PARAMETERVALUE]
AS
[Account].[Month Short Name].CURRENTMEMBER.UNIQUENAME
[Code] .....
I tried using the exp
=Parameters!MONTH.Value(0)
so as to return the first parameter in the parameter dataset , but i have the error the expression that ref the parameter MONTH does not exists in the parameter collection.
how to handle space between multi-value parameter values in SSRS. For e.g. if the values are as follows -'KLO LUG', 'HGY KIU', 'LOT JUY', I know I can use the split function for the commas but its the space between the value which is the problem.
View 3 Replies View RelatedHi,
I have written a program that uploads RDL files to Reporting Services 2005 using the web service.
I am calling the CreateReport method to upload the RDL files
<code>
warnings = propagator.ReportServerProxy.CreateReport(reportFileName, reportFolderName, True, reportDefinition, Nothing)
</code>
The third parameter (True) means to overwrite the file if it exists.
I'm having a problem when I update an existing RDL file. When adding the RDL for the first time, the Reporting Server appears to hang on to the default values for the parameters. Overwriting an existing RDL file doesnt update these "cached" parameters.
So my first thought is to delete the report on the server before uploading the RDL file. But the web service only has a "DeleteItem" method which causes all schedules, tasks, etc associated with the report to be removed, which is definitely something I DONT want ;-)
Any idea how I could get around this
Thanks,
hi,
i am using ssrs 2005 and need to pass the multi selected parameter values to another report. how can i achieve this task? I use jump to report option.
I am working with SP. How can we find out values of parameters when the SP is executed with the default values?
View 9 Replies View RelatedA have a multi-valued parameter (B) which is dependent on a single-valued parameter (A) on my report. When a value is selected in A, I want all matching values in B to be selected by default and the "Select All" option checked. To do this I have set the Default Values section in B to point to the same dataset as the "Available Values" section. Both A and B have default values so the report runs automatically.
One of the values in parameter A (say Value1) yields more values in parameter B than the other (say Value2).
If I run the report the first time with Value1 selected as the default for parameter A, all values in B are checked correctly. If I run the report with Value2 selected the first time and then change the selected value to Value2 and run my report, all values in B are displayed but only the values that were previously checked (when Value1 was selected), are now checked, leaving the "Select All" unchecked.
What am I doing wrong? Why are all the values in B not checked? The dataset is the same in "Available Values" section and "Default Values" section.
I have created a report, and am setting default values for the parameters. Once the default parameters is set, the report automatically generates. Is there a way to make it not automatically generate the report? We are setting the parameters with values that will get the end user the most recent data, but alot of times, they will want to pull older data as well. We don't want them to have to wait for the report to automatically generate before they can change the parameter values
View 1 Replies View RelatedHi,
I am experiencing some problems calling reports in ReportServer using URL.
I have several multivalue parameters that are not being set through the URL. The values for this parameters should be the default ones that I have set in VS.
When I preview the report in VS, the default values are correctly set but, when using the URL call, I keep being prompt for this parameters and the report is not rendered until I set them manually.
Does anyone ever had this problem?
Thank you in advance
Catarina Ribeiro
I am designing a report which will be used under the subreport control of a master report, now i am using a stored procedure for the subreport which has two parameters.
In the subreports dataset parameters tab, how can i mention the master reports columns, since i do not see the master reports columns here. since it is a different report.
If i use a hardcoded select query then i can just say
select address, city, state, zipcode from customer where (customerid = @customerID)
but i am using a stored proc. how to define the parameters under datasets parameter tab.
Thank you very much for the information.
I need to somehow set up a third parameter which allows me to control the tag quantity type either by ALL - % , IS NULL, or IS NOT NULL.
I tried TAG_QUANTITY LIKE :Tags but this would only work if I had the % option select and not the IS NULL or IS NOT NULL
Any thoughts on how to format the select statement?
SELECT ORGANIZATION_ID, TAG_ID, PHYSICAL_INVENTORY_ID, TAG_NUMBER, CREATION_DATE, VOID_FLAG, TAG_QUANTITY, TAG_UOM, SUBINVENTORY,
LOCATOR_ID, COUNTED_BY_EMPLOYEE_ID
FROM INV.MTL_PHYSICAL_INVENTORY_TAGS
WHERE (ORGANIZATION_ID = ite) AND (PHYSICAL_INVENTORY_ID = :InventoryID) AND (VOID_FLAG = 2) AND TAG_QUANTITY IS NULL
ORDER BY TAG_NUMBER
I have a report that has 2 parameters. I use this report to do comparisons of performance data between two builds of our product. I'm not hosting this report in a seperate page, just using the standard sql reporting services web interface.
I'd like to be able to send out a link to this page that will load up the page with values for the parameters specified. I know in the report definition itself I can change the default parameter values, but I'd rather not change and redeploy the report every time I need to send it out for others to view.
My first thought was that it should be easy enough to specify the parameters as part of the url querystring and read the values in somehow using an expression for the parameters default value. Is this possible? I've done a bunch of searching but can't seem to find any good examples of this.
Hi,
I have created a report using Report designer (Visual Studio, using Data Model as a data source), in the report I had created few datasets (with single filed) to populate the report parameters, lets say I have created a multi valued Parameter CustomerName and assigned field from a dataset,
result are coming correctly and combo box is getting populated but the customers are not in alphabetical order!
I want to sort it and need to specify it in report (please note that I am using Report Model as a data source and I can€™t sort the source table in the data base to get the result sorted)
Please let me know if anybody has done that or forward me if know some link which talks about it.
Thanks in advance.
Regards,
Jayant Jape
Hi,
I have dropdown parameter with multi-values allowed.
In my report headed I want to show all the dropdown values that were checked by the user to run the report. But since there could be a couple of hundred values I want to show ALL when all the values are selected instead of listing them one by one.
How can I do that?
Thanks,
Igor
If I have a Select statement like this in my C# code:
Select * From foods Where foodgroup In (@foodgroup)
And I want @foodgroup to have these values ... "meat", "dairy", fruit", what is the correct way to add the parameter?
I tried
meat, dairy, fruit
'meat', 'dairy', 'fruit'
but neither worked. Is this possible?
Hi All,
I have requirement where first I need to show only one report
parameter. Based on user selection I need to prompt or show the user
another report parameter.
Say suppose I have 3 parameters. User selects first value in first
parameter I should not show the other 2 parameters. If user selects
second value in first parameter I should show second parameter and
hide third parameter. There is no relationship between these 2
parameters except user selection. Similarly if user third value in
first parameter then I should show third parameter and hide second
parameter.
Is this possible? I can not see any Visible property for report
parameters.
If yes, how to achieve this functionality?
Appreciate your help.
Regards,
Raghu
I have a report with a subscription enabled and the default values that are selected for the report frequently change. Â I have our report server locked down so that the users can't change the defaults, but I now want to empower them to maintain this on their own. Â Here is my dilemma. Â When you have the available parameters set up to pull from a query, the defaults on the report server have to be keyed in manually, which is not an option. Â The only way to get a check box there, is to explicitly specify the available values.I need my available values to be database driven and I need to be able to select my defaults on the report server using check boxes.
View 5 Replies View Related