Drag And Drop Rows
Feb 10, 2007Is there any way that I can drag and drop rows in SQL Server Studio Management Express? Every time I open a table, I want to move a row by just dragging and dropping but it can't be done.
View 3 Replies
ADVERTISEMENT
Drag And Drop
Apr 10, 2008Hi,
I am using SQL Server 2005, trying to drag and drop a sql-query but it is not possible. This was possible before, what might be the cause?
Now, I have to open file, browse to the query and then it works but that is very time consuming. Would appreciate any suggestion.
Drag And Drop
Jan 31, 2008Hi,
In SSRS do I able to drag and drop the columns in the report (Internet Explorer) so that after drag and drop the report refreshes with the changes as we made?
Do Drag And Drop Controls Create DataSets
Nov 27, 2006When I drag a GridView from the toolbox onto a Webform, and then configure its DataSource is a true DataSet created that I can access in the code behind? When my results return I want to be able to access individual rows and cells, taking their values, assiging them to variables and then using the newly equated variable to perform calculations.
Thank you,
SQLData Source Doesnt Appear When You Drag And Drop
Feb 23, 2007Really not sure what is going on. I drag and drop the SQLDataSource to my website. At that point I can see the properties of it, but there is no graphical box on my website. Therefore I can no longer make any changes to the controller once I drag it on the website. I did create a brand new website with nothing on it, drag and dropped and still nothing appears. Any assistance would be great.
View 6 Replies View RelatedSolution Explorer Drag/drop Error?
Feb 19, 2007I've submitted a bug report for this, but I also want to be sure it's not my own installation.
In the solution explorer, when I drag a package (usually accidentally) to another spot in the list, it disappears from the list. If I try to re-add the package, it thinks the original already exists, and names the second one with a "(1)" suffix. I can work around this by moving the original package out of the primary package folder and then re-adding it through solution explorer, but that's a touch cumbersome.
I don't really have a question here other than perhaps validation of the issue. Thanks.
Here's the bug report if others experience the same issue:
https://connect.microsoft.com/SQLServer/feedback/ViewFeedback.aspx?FeedbackID=258908
Analysis :: Cube Measure Does Not Show Any Data When Drag And Drop In Browser
Aug 26, 2015I created SSAS cube in VS 2008 and have been able to deploy it successfully to the server. While creating the cube I was able to browse dimensions and all underlying tables just to make sure it has data. After deploying successfully when I drag and drop any measure group to browser it does not display anything.
The only thing I did different from straightforward cube building process was that when I created those measure groups the partitions that were created by default were giving me some unknown errors so I had to delete them in order for cube to process successfully.
Did that made any difference because I thought partitions are for improving query performance and has nothing to do with cube processing errors.
Integration Services :: Can Drag And Drop Existing SSIS Package Into For Each Loop Container?
May 18, 2015Can we drag and drop Existing SSIS package into for each loop container ?
View 3 Replies View RelatedHow To Drop Lookup Rows That Have No Exact Match?
Nov 7, 2007I have a very basic Lookup in my SSIS package that looks up against two columns and outputs a row to a table. Now currently if there is no exact match, it writes a null in my destination table. How do I simply drop all those rows that dont produce an exact match? I tried using the 'Ignore' error output, but with that it writes NULLS into my destination table. With the 'Redirect' it is looking for a place to redirect the error (NULL) rows, and I dont want to deal with the hassle or writing these NULL values to a file or table just to delete them afterwards. I just simply want to forget about all those rows that dont produce an exact hit and only fill in the destination table with those that do produce a hit. How can I drop these lookup rows that dont produce an exact match?
View 5 Replies View RelatedIntegration Services :: SSIS 2012 - Can't Drag Objects Or Resize In Control Or Data Flow
Feb 3, 2014I recently upgraded to on 2012 SP1 CU5 and have found the SSDT gui for SSIS to be almost unusable. I can't drag or resize items. Any time i try they either automagically shrink to the tiniest possible size, shoot off to some extreme or just shake uncontrollably I didn't have these problems on previous versions (dont remember what It was).
Is there a fix for this?
Drop All Indexes In A Table, How To Drop All For User Tables In Database
Oct 9, 2006Hi,I found this SQL in the news group to drop indexs in a table. I need ascript that will drop all indexes in all user tables of a givendatabase:DECLARE @indexName NVARCHAR(128)DECLARE @dropIndexSql NVARCHAR(4000)DECLARE tableIndexes CURSOR FORSELECT name FROM sysindexesWHERE id = OBJECT_ID(N'F_BI_Registration_Tracking_Summary')AND indid 0AND indid < 255AND INDEXPROPERTY(id, name, 'IsStatistics') = 0OPEN tableIndexesFETCH NEXT FROM tableIndexes INTO @indexNameWHILE @@fetch_status = 0BEGINSET @dropIndexSql = N' DROP INDEXF_BI_Registration_Tracking_Summary.' + @indexNameEXEC sp_executesql @dropIndexSqlFETCH NEXT FROM tableIndexes INTO @indexNameENDCLOSE tableIndexesDEALLOCATE tableIndexesTIARob
View 2 Replies View RelatedAnalysis :: Dimensions Attributes - Drag All Or Some Specific Attributes
May 24, 2015I'm using a DW from Northwind database to build a cube to do some analitical taks. I already create the cube and now I am "cleaning" the dimensions. I'm having some difficults to understand the logical off this part. The reason is that When I create the Data Source View, I only import the Foreign Keys that connect the Dimensions to Fact_Table. I have to drag the attributes of Dimension from Data Source View to the tab attributes?
Imagine this:
I have the following dimension:
Dim_Customer:
Customer_ID
Name_Customer
Job_Function
Date_of_Birth
Contact
Address
City
Country
When I create the cube only Customer_ID appears in attributes tab, it's normal?
One more question:
I don't want to create a hierarchy like:
Customer ID -> Name_Customer
Customer ID -> Date_of_Birth
Customer ID -> Address
Customer ID -> City
Customer ID -> Country
My idea is to create the following hierarchy:
Name_Customer -> Date_of_Birth -> Address -> City -> Country
But the first hierarchy that I show is always appears to me. Do you know what is happens?
Rollback Will Drop Created Tables And Drop Created Tables In Transaction..?
Dec 28, 1999Hi folks.
Here i have small problem in transactions.I don't know how it is happaning.
Up to my knowldge if you start a transaction in side the transaction if you have DML statements
Those statements only will be effected by rollback or commit but in MS SQL SERVER 7.0 and 6.5
It is rolling back all the commands including DDL witch it shouldn't please let me know on that
If any one can help this please tell me ...........Please............
For Example
begin transaction t1
create table t1
drop table t2
then execute bellow statements
select * from t1
this query gives you table with out data
select * from t2
you will recieve an error that there is no object
but if you rollback
T1 willn't be there in the database
droped table t2 will come back please explain how it can happand.....................
Email Address:
myself@ramkistuff.8m.com
T-SQL (SS2K8) :: Get Rows From C If Linked Rows In B Contain All Rows In A
Oct 28, 2014I have 3 tables...
JobRequirements (A)
JobID int
QualificationTypeID int
EmployeeQualifications (B)
EmployeeID int
QualificationTypeID int
Employee (C)
EmployeeID int
EmployeeName int
I need to return a list of all employees fit for a specific job ... The criteria is that only employees who have all the JobRequirements are returned. So if a job had 3 requirements and the employee had just 2 of those qualifications, they would not be returned. Likewise, the employee might have more qualifications than the job requires, but unless the employee has all the specific qualifications the job requires they are not included. If an employee has all the job qualifications plus they have extra qualifications then they should be returned...
How to only return those records where all the child records are present in the other table..
Rows Skipped Out In Stored Procedure While Return All Rows If Query Executed Seprate
Nov 8, 2007Hi All,
I am using sql server 2005. I stuck out in a strange problem.
I am using view in my stored procedure, when I run the stored procedure some of the rows get skipped out means if select query have to return 10 rows then it is returning 5 rows or any other but not all, also the records displyaing is randomly coming, some time it is displaying reords 12345 next time 5678, other time 2468.
But if I run seperately the querys written in SP then it returns all the rows. Please give me solution why it is happening like this.
There are indexes in the tables.
Once I shrink the database and rebuild the indexes, from then this problem is happening. I have rebuild the indexes several time, also updated the statistics but nothing improving.
But nothing is improving
To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal
Feb 20, 2008Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
How can we handle transactions in SSIS
1. when some error/something happens during export and the # of rows are not exported fully to destination, how to rollback the transaction in SSIS.
Any sort of help would be highly appreciated.
Thanks,
Integration Services :: Using Rows Returned In Object Variable And Email When Rows Exist
Sep 11, 2015I have a conditional split in an SSIS package - one split is where if rows are returned according to a specific rule, then insert those rows into to a Recordset Destinationm which points to a variable of Object type.
How I can use this variable to email fellow users. For example, what I would like is if ANY rows are returned to the Object variable (1 or more), then I would like to execute an email SP that we have on our server.
To Validate # Of Excel Rows(source) And Sql Server Table(destination) Rows Are Equal
Feb 20, 2008Hi,
When expoting data from excel to sql server table, using SSIS package, after exporting is done, how would i check source rows are equal to destination rows. If not to throw an error message.
Any sort of help would be highly appreciated.
Thanks,
Arranging Data On Multiple Rows Into A Sigle Row (converting Rows Into Columns)
Dec 25, 2005Hello,
I have a survey (30 questions) application in a SQL server db. The application uses several relational tables. The results are arranged so that each answer is on a seperate row:
user1 answer1user1 answer2user1 answer3user2 answer1user2 answer2user2 answer3
For statistical analysis I need to transfer the results to an Excel spreadsheet (for later use in SPSS). In the spreadsheet I need the results to appear so that each user will be on a single row with all of that user's answers on that single row (A column for each answer):
user1 answer1 answer2 answer3user2 answer1 answer2 answer3
How can this be done? How can all answers of a user appear on a single row
Thanx,Danny.
Ssis Package Design To Load Only Rows Which Are Changed From Exisiting Rows.
Aug 17, 2007Hi i tried designing a SSIS package which loads only those rows which were different from existing rows in the table , i need to timestamp the existing row with an inactive date when a update of that row is inserted (ex: same studentID )
and the newly inserted row with a insert time stamp
so as to indicate the new row as currently active, in short i need to maintain history and current rows in same table , i tried using slowly changing dimension but could not figure out, anyone experience or knowledge regarding the Data loads please respond.
example of Data would be like
exisiting data
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
New row to insert would be
12 DDS 15 M DFG ST 4/5/07
the data should reflect
StudentID Name AGE Sex ADDRESS INSERTTIME UPDATETIME
12 DDS 14 M XYZ ST 2/4/06 4/5/07
12 DDS 15 M DFG ST 4/5/07 NULL
14 hgS 17 M ABC ST 3/4/07 NULL
Please provide your input as much as you can even though it might not be a 100% solution.
How To Create A Trigger Such That It Can Delete The Rows Whenever Any Other Application Such As Biztalk Had Read The Rows ?
Mar 12, 2007I had created a trigger which sees that whether a database is updated if it is its copy the values of the updated row into another control table now I want to read the content of control_table into BIzTalk and after reading I want to delete it.Can any one suggest the suitable ay to do this?
View 3 Replies View RelatedCompare Values In Consecutive Rows And Print Rows Based On Some Conditions
May 8, 2008 I have the following variables VehicleID, TransactDate, TransactTime, OdometerReading, TransactCity, TransactState.
VehicleID is the unique vehicle ID, OdometerReading is the Odometer Reading, and the others are information related to the transaction time and location of the fuel card (similar to a credit card).
The records will be first grouped and sorted by VehicleID, TransactDate, TransactTime and OdometerReading. Then all records where the Vehicle ID and TransactDate is same for consecutive rows, AND TransactCity or TransactState are different for consecutive rows should be printed.
I also would like to add two derived variables.
1. Miles will be a derived variable that is the difference between consecutive odometer readings for the same Vehicle ID.
2. TimeDiff will be the second derived variable that will categorize the time difference for a particular vehicle on the same day.
My report should look like:
VehID TrDt TrTime TimeDiff Odometer Miles TrCity TrState
1296 1/30/2008 08:22:42 0:00:00 18301 000 Omaha NE
1296 1/30/2008 15:22:46 7:00:04 18560 259 KEARNEY NE
Can someone please help me here?
Thanks,
Romakanta
Using SSIS 2005 To Strip Out Bad Rows In Excel And Then Insert Detailed Rows Into OLE DB Data Source
Apr 6, 2006Environment:
Running this code on my PC via VS 2005
.Net version 2.0.50727 on the server (shown in IIS)
Code is in ASP.NET 2.0 and is a VB.NET Console application
SSIS 2005
Problem & Info:
I am bringing in an Excel file. I need to first strip out any non-detail rows such as the breaks you see with totals and what not. I should in the end have only detail rows left before I start moving them into my SQL Table. I'm not sure how to first strip this information out in SSIS specfically how down to the right component and how to actually code the component to do this based on my Excel file here: http://www.webfound.net/excelfile.xls
Then, I assume I just use a Flat File Source coponent or something to actually take the columns in the Excel and split into an OLE DB Datasource to shove each column into a corresponding column in my SQL Server Table. I have used a Flat File Source in the past to do so with a comma delimited txt file but never tried with an Excel.
Desired Help:
How to perform
1) stripping out all undesired rows
2) importing each column into sql table
Integration Services :: Data Flow Task Failed After Loading 29000 Rows Out Of 234567 Rows
Oct 13, 2015I am facing an issue that Data flow task failing after loading 29000 rows out of 2lakhs rows.
I am loading data from .csv file to OLE DB Destination.
This data flow task is placed inside For each loop container.
is this issue because of any performance issue in SSIS packages such as buffer size.
find the error below:
DFT Load Data from FlatFile:Error: The conditional operation failed.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR.
The "DER Add Calc Columns" failed because error code 0xC0049063 occurred, and the error row disposition on "DER Add Calc Columns.Outputs[Derived Column Output].Columns[M_VALUE_NUM]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
DFT Load Data from FlatFile:Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "DER Add Calc Columns" (48) failed with error code 0xC0209029 while processing input "Derived Column Input" (49). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[code]....
T-SQL (SS2K8) :: Rows Into Columns - Remove Duplicates And Variable Rows
Aug 5, 2014I managed to transpose rows into columns.
;WITH
ctePreAgg AS
(
select top 500 act_reference "ActivityRef",
row_number() over (partition by act_reference order by act_reference) as rowno,
t3.s_initials "Initials"
from mytablestuff
order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
ref, initials
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
ref, init1,init2
Ag-4xYS
Ag-6xYS,BL
Ap-1xKW
At-2x SAS,CW
At-3x SAS,CW
Transact SQL :: Table Trigger To Delete All Rows Before Inserting Rows
Jul 24, 2015I have a SQL script to insert data into a table as below:
INSERT into [SRV1INS2].BB.dbo.Agents2
select * from [SRV2INS14].DD.dbo.Agents
I just want to set a Trigger on Agents2 Table, which could delete all rows in the table , before carry out any Insert operation using above statement.I had below Table Trigger on [SRV1INS2].BB.dbo.Agents2 Table as below: But it did not perform what I intend to do.
USE [BB]
GO
/****** Object: Trigger Script Date: 24/07/2015 3:41:38 PM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[code]....
Retriving Previous 5 Rows And Next 5 Rows And The Searched Record
Mar 30, 2008Dear All
I have a table with the following structure in sql server 2005
create table app(
sno int,
name varchar(50),
add varchar(50),
city varchar(50),
state varchar(50)
)
it contains the follwing data
------------------------------------------
sno name add city state
------------------------------------------
1 mark street no1 newcity newstate
2 mark street no1 newcity newstate
3 mark street no1 newcity newstate
4 mark street no1 newcity newstate
5 mark street no1 newcity newstate
6 mark street no1 newcity newstate
7 mark street no1 newcity newstate
8 mark street no1 newcity newstate
9 mark street no1 newcity newstate
10 mark street no1 newcity newstate
11 mark street no1 newcity newstate
12 mark street no1 newcity newstate
13 mark street no1 newcity newstate
14 mark street no1 newcity newstate
15 mark street no1 newcity newstate
16 mark street no1 newcity newstate
17 mark street no1 newcity newstate
18 mark street no1 newcity newstate
19 mark street no1 newcity newstate
20 mark street no1 newcity newstate
----------------------------------------
I want to retrive previous 5 records, next 5 records and the record that meet the where condition of a select query.
When I run
select sno,add,name,city,state from app where sno=7
I want the following result
------------------------------------------
sno name add city state
------------------------------------------
2 mark street no1 newcity newstate |
3 mark street no1 newcity newstate |
4 mark street no1 newcity newstate | -- previous 5 records
5 mark street no1 newcity newstate |
6 mark street no1 newcity newstate |
7 mark street no1 newcity newstate --- searched record
8 mark street no1 newcity newstate |
9 mark street no1 newcity newstate |
10 mark street no1 newcity newstate |--- next 5 records
11 mark street no1 newcity newstate |
12 mark street no1 newcity newstate |
----------------------------------------
if there is a method to get the above result set, kindly post the query.
Finding Rows With Missing Related Rows
Apr 2, 2008Hi, I need to write a query which I have never attempted before and could do with some help.... I have a Groups table and a Users_Groups look up table. In this model, users can only be assigned to 1 group. If a group is deleted, a trigger should fire and delete any rows in User_Groups having a matching Groups.Ref. Unfortunately, the trigger hasn't been firing and I now have a load of defunct rows in Users_Groups relating users to groups which do not exist.I now need to find all of these defunct rows in Users_Groups so that I can delete them. How can I find rows in Users_Groups where the parent rows and refs in Groups are null? I've tried searching the net for something similar but don't even know how to word the search properly to get any half relevant results. Cheers PS, I do realise I need to tighten the constraints on my database
View 5 Replies View RelatedHelp, Selecting Rows Based On Values In Other Rows...
Mar 25, 2002I'm stuck. I have a table that I want to pull some info from that I don''t know how to.
There are two colomuns, one is the call_id column which is not unique and the other is the call_status column which again is not unique. The call_status column can have several values, they are ('1 NEW','3 3RD RESPONDED','7 3RD RESOLVED','6 PENDING','3 SEC RESPONDED','7 SEC RESOLVED').
i.e example, this is the existing data.
Call_id Call_Status
555555 3 3RD RESPONDED
235252 7 SEC RESOLVED
555555 7 3RD RESOLVED
325252 6 PENDING
555555 6 PENDING
325235 3 SEC RESPONDED
555555 1 NEW
This is the data I want...
Call_id Call_Status
555555 3 3RD RESPONDED
555555 6 PENDING
555555 7 3RD RESOLVED
The call_id could be any number, I only want the 6 PENDING rows where there are other rows for that call_id which have either 3 3RD RESPONDED or 7 3RD RESOLVED. If someone knows how it would be a great help.
Cheers,
Chris
Select Distinct Rows From Duplicate Rows....
Nov 28, 2007Dear Gurus,I have table with following entriesTable name = CustomerName Weight------------ -----------Sanjeev 85Sanjeev 75Rajeev 80Rajeev 45Sandy 35Sandy 30Harry 15Harry 45I need a output as followName Weight------------ -----------Sanjeev 85Rajeev 80Sandy 30Harry 45ORName Weight------------ -----------Sanjeev 75Rajeev 45Sandy 35Harry 15i.e. only distinct Name should display with only one value of Weight.I tried with 'group by' on Name column but it shows me all rows.Could anyone help me for above.Thanking in Advance.RegardsSanjeevJoin Bytes!
View 4 Replies View RelatedCan I Read Some Rows From The Middle Of Rows In DataReader?
Mar 30, 2007helo..
I have 100,000 rows in the database and I want to read results for eg: from 5000 to 5050 by DataReader.
I wrote this code to do this but its too slow:
Dim SlctStr As String = "select * from topicstbl where partID like '" & PagePartID & "'"
Dim ReadCom As New SqlClient.SqlCommand
ReadCom.CommandText = SlctStr
ReadCom.Connection = MainLib.MyConnection
Dim MyReader As SqlClient.SqlDataReader = ReadCom.ExecuteReader()
Dim StartTNum As Long = 5000
For IR As Long = 0 To StartTNum - 1
MyReader.Read()
Next
Do While MyReader.Read
StartTNum += 1
If StartTNum > 5500 Then Exit Do
'''''''''''''''''''
Loop
MyReader.Close()
is there another way to do the same thing better off than this code?
How To Drop PK?
Sep 5, 2001How can I drop Primary Key? If I do/don't have data in the table.Thanks!
Ravi.
Cant Drop
Apr 26, 2007Why can't I drop the database? Is this query correct Drop database databasename?
View 1 Replies View Related