Duplicate Data Entry When Using The ASP.NET Web Site Administration Tool For Logins
Nov 5, 2007
Hello All,
I am using the Web Site Administration Tool with the ASP.NET login controls to create/manage user logins & roles for my site.
I have exported the ASPNETDB.MDF into my SQL Database ready to use with my app. The problem that I'm having is that whenever I add a user, using either the Web Site Administration Tool or the Classes available in the code-behind. The entry is doubled up in the database.
This is not a problem when logging on....however, when it comes to deleting a user it will only take one of the entries out and leave the duplicate in there. So if the administrator has deleted a user from the app and then tried to create another one with the same UserName (Which whomever is well within his/her rights to be able to do), they cannot because the entry which has "stay behind" in the database conflicts with the entry.
Any help on this matter would be greatly apprieciated. If any more info on this matter is required please ask (It was quite hard to try and explain this :-)
View 1 Replies
ADVERTISEMENT
Dec 29, 2006
How do I tranfer a previous table and its data to the ASPNETDB.MDF in the Web Site Administration tool. I've tried right, but I can't locate the database in the SQL server on my server. help please.
View 1 Replies
View Related
Mar 7, 2007
I am getting the following error using the Web Site Administration
Tool. I have created the database I want to use. Please
help.Could not establish a connection to the database.
If you have not yet created the SQL Server database, exit the Web Site
Administration tool, use the aspnet_regsql command-line utility to
create and configure the database, and then return to this tool to set
the provider.
The utility either is not working or I do not know how to use it.
I have SQL 2005 Express and SQL 2000. SQL 2000 is working
properly, not sure about SQL 2005. I have been told to use SQL
2000 because that is what our server is using. I am developing on
my server and when application works will port to our server.
Dee
View 24 Replies
View Related
Jul 17, 2007
Hello,I'm trying to create new users and roles using the Web Site Administration Tool, tab Provider, but I get the following error message: Could not establish a connection to the database.If you have not yet created the SQL Server database, exit the Web SiteAdministration tool, use the aspnet_regsql command-line utility to create andconfigure the database, and then return to this tool to set the provider.Then I ran aspnet_regsql utility using default values in every screen, but I got the following error message: Setup failed.Exception:Unable to connect to SQL Server database.----------------------------------------Details of failure----------------------------------------System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) ...How can I solve this? Thanks
View 5 Replies
View Related
Sep 13, 2007
Hi,I have a problem when I use ASP .NET Web Application Administration tool. When I click the Security tab, I receive following message"There is a problem with your selected data store. This can be caused by an
invalid server name or credentials, or by insufficient permission. It can also
be caused by the role manager feature not being enabled. Click the button below
to be redirected to a page where you can choose a new data store. The following message may
help in diagnosing the problem: Unable to connect to SQL Server database."In the same page, there is a button to go to Provider section. I clicked it, and I went to the Provider page. There, there were two links, which were: "Select a single
provider for all site management data" and "Select a different provider for each feature
(advanced)". I clicked the earlier, and I was redirected to a page to select provider. There, there was a link, I clicked it and I receive following message:"
Provider
Management
Could
not establish a connection to the database. If you have not yet created the
SQL Server database, exit the Web Site Administration tool, use the
aspnet_regsql command-line utility to create and configure the database, and
then return to this tool to set the provider. "After reading this message, I opened Command Prompt and went to C:WINDOWSMicrosoft.NETFrameworkv2.0.50727. There, I ran the aspnet_regsql command, and then ASP .NET SQL Server Setup Wizard was displayed. In the first page of this wizard I chose "Configure SQL Server for application services" and then I clicked "Next" button. In the second page I left all fields as they were and then I clicke"Next". In the third page I only clicked "Next" and then some process ran. Finally, in the last page I received following message:"Setup failed.Exception:Unable to connect to SQL Server database.----------------------------------------Details of failure----------------------------------------System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) --- End of inner exception stack trace --- at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString) at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install) at System.Web.Management.SqlServices.Install(String database, SqlFeatures features, String connectionString) at System.Web.Management.ConfirmPanel.Execute()"What should I do? I tried to use this administration tool on computer in my house and everything was just fine. Why do I have this problem in my office?
View 6 Replies
View Related
Mar 31, 2006
I installed SQL Server 2005 Express Edition, I can login to it just fine using SQL Server Management Studio Express. I ran the aspnet_regsql and it created the aspnetdb database. But when I try to test the AspNetMembershipProvider or go to the Security tab in the ASP.NET Web Site Administration Tool it does not work. I have tried messing with the connectionString of the LocalSqlServer in the machine.config, but to no avail. My SQL Server is installed on the Default Instance. Can someone help me get ASP.NET Web Site Administrator to work with my SQL Server 2005 Express Edition?
View 1 Replies
View Related
Oct 5, 2007
Hi,
I want to know the different sources, mediums and ways using which the duplicate recoprds or adta can make an entry in our database tables. I found 4 ways for this from many articles on net that are as follows:
Duplicate data might arrive at your database via an interface to another system
Data is loaded into table from other sources because during data loads, the integrity constraints are disabled
Merging data from disparate systems
Inheriting a poorly designed databaseBut is there any other ways also present????? Please tell me???
Thanks,
View 1 Replies
View Related
Jun 26, 2005
Hi...
Does anybody know of an open source script I can download that will enable me to manage an SQL database? I basically need to access and modify the database from any machine that may not have SQL Enterprise Manager Installed. I was thinking of writing my own script to do this but I assumed that there is probably already one out there.
View 6 Replies
View Related
Mar 30, 2004
Hello,
I need an Administration tool for SQL SERVER 6.5 compatible with WINDOWS 2000.
When I try to search one with GOOGLE, I find none ...
If anyone can provide me with any solution, he (or she) will make me the most happy of the DBAs today ...
Thanks in advance
Al'
View 1 Replies
View Related
Jul 20, 2005
Hi all,I have installed MSDE on my computer but it's missing, as all you alreadyknow, a serious (well, osql IS TOO serious but not very newbie friendly)admin tool.I have downloaded http://www.asql.biz/DbaMgr.shtm and i'm quite happy withit but was wondering if there's something better or that may complete whatDbaMgr2k is missing... and preferably is as free as DbaMgr2k.Thank You,Lorenzo
View 2 Replies
View Related
Apr 30, 2008
I am trying to set up the web administration for a website that uses login controls. I have set up the ASPNETDB database using the regular aspnet_regsql command on my SQLEXPRESS.
To set up the web admin tool, I created a vdir to point to %WINDIR%Microsoft.NETFrameworkv2.0.50727ASP.NETWebAdminFiles. This works absolutely fine. I also changed the configuration of this website to use the ASPNETDB on my SQLEXPRESS.
<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=aspnetdb"
providerName="System.Data.SqlClient" />
This website also has impersonation enabled
<identity impersonate = "true" />
The administration website works fine till I click on the security tab, and I get the following error:
Cannot open database "aspnetdb" requested by the login. The login failed. Login failed for user 'HOMEASPNET'
What I don't understand is why the application is using the ASPNET account to connect to the database when impersonation is enabled. Isn't it supposed to use the credentials of the windows user? I read a couple of posts on MSDN which advise to explicitly create a login for the ASPNET user in the ASPNETDB database (which will definitely work) but somehow it seems counter-intuitive to me. Any advise anyone?
View 8 Replies
View Related
Nov 28, 2007
I am new to VWD, and web development. I installed VWD and SQL Server Express local.
I'm learning how to use the VWD with some of the walkthrough samples. It was going great until I got to the walkthrough where it show "how to use configure user and role with Web Site Admin Tool". I followed the walkthrough steps by step. I clicked the Security Tab and I got the following error:
"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. "
I read some article. According to the articles, SQL Server Express will automatically create the asp database for the first time. but my SSE did not create the database.
What did you do wrong? Please help. Thank you
TCF
View 1 Replies
View Related
Dec 1, 2006
I get the following error message when i click the Security tab on my websites' Administration tool. All the other tabs are working properly.
There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 1802 and the SqlException message is: CREATE DATABASE failed. Some file names listed could not be created. Check related errors. Cannot create file 'C:SAFETYDATABASEAPP_DATAASPNETDB_TMP.MDF' because it already exists. Change the file path or the file name, and retry the operation. Creating the ASPNETDB_652db56c1d7d4c9f94da67107d9c917a database...
Any help is appreciated.
View 1 Replies
View Related
Aug 24, 2006
Hi!
My problem is...i gut this errormessage in Web Site Administration Tool:
There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: The database filename can not contain the following 3 characters: [ (open square brace), ] (close square brace) and ' (single quote)
I recieved it after i try'ed to change the default Providers and use another DB then default. Now i want to go back to how it was from start, if i create a user and role - i want VS 2005 to create a SQL Express DB for me. Can anyone help me? I have even tryed to reinstalled VS 2005 but it didn't help.
/Bamsen
View 1 Replies
View Related
Oct 21, 2007
All,
What kind of tools do you use to monitor the site(SOC/NOC) activities?
What is your experience on the tools? Which one would you recommend?
View 3 Replies
View Related
Jul 24, 2007
Hi All,
I have a table with name C1_Subscribers with three fields (1)-MobileNumber [varchar]
(2)-ReceivedTime [datetime]
(3)-Status [char].
Now here how to remove duplicate entry of same mobile number to MobileNumber field?
Regards
Shaji
View 4 Replies
View Related
Feb 18, 2014
How can i keep only one record from duplicate entry.
Example
COLUMN1COLUMN2COLUMN3COLUMN4
AAA121-12
AAA121-13
AAA121-14
Here i want to keep only the top record and want to delete other 2 rows.
View 4 Replies
View Related
Jul 10, 2007
Hi everybody couldn't get through with saving my data on the table with two primary keys...
my table structure is this
pubidintUnchecked (primary key)
pubchar(1)Unchecked
publchar(1)Unchecked
pubcodechar(2)Unchecked (primary key)
a sample data is here
pubid pub publ pubcode
1 a b ab
1 b b bb
2 a b ab
2 b b bb
when i save this table modifying the pubid and pubcode as primary keys the following error displays...
Unable to create index 'PK_PUBS3'.
CREATE UNIQUE INDEX terminated because a duplicate key was found for index ID 1. Most significant primary key is '51'.
Could not create constraint. See previous errors.
The statement has been terminated.
what i understand is that on the primary key duplicates are not allowed how could i allow it?
thanks
View 7 Replies
View Related
Aug 15, 2000
Does anyone know if there is a 3rd party tool available to disconnect user logins after being inactive for a period of time? Is this something that can be custom written?
Thanks for any assistance, Jim
View 3 Replies
View Related
Oct 24, 2007
Hi,i am using SQL server 2005 and have a table with 4 columns.Column1 is primary key,col2 is foreign key and col3 and col4 are regular data column.When the user enters the data i want to make sure that for a given foreign key(col2),entries in col3 are not duplicated.Is there a way,i can make sure this at db level,using some kind of constraints or something?Thanks a bunch..
View 10 Replies
View Related
Jun 6, 2004
We have a SQL Server 6.5 table, with composite Primary Key, having the Duplicate Entry for the Key. I wonder how it got entered there? Now when we are trying to import this table to SQL2K, it's failing with Duplicate row error. Any Help?
View 4 Replies
View Related
Apr 6, 2012
I'm trying to modify a specific row in a table.
$paper_id = 2A
$query = "UPDATE book SET paper_id='$paper_id', title='$title'";
I'm getting this error <<query failed: Duplicate entry '2A' for key 'PRIMARY'>>
Structure:
Column: paper_id
Type: Char
Length: 20
Deafult: None
View 5 Replies
View Related
Nov 19, 2015
I am wanting to create a query so that I can combine each of the found duplicates into one entry.
An example of this is:
Name |ID |Tag |Address |carNum
-------------------------------------------------------
Bob Barker |2054| 52377 |235 Some road |9874
Bill Gates |5630| 69471 |014 Washington Rd. |3700
Bob Barker |2054| 97011 |235 Some road |9874
Bob Barker |2054| 40019 |235 Some road |9874
Steve Jobs |8501| 73051 |100 Infinity St. |4901
John Doe |7149| 86740 |7105 Bull Rd. |9282
Bill Gates |5630| 55970 |014 Washington Rd. |3700
Tim Boons |6370| 60701 |852 Mnt. Creek Rd. |7059
In the example above, Bob Barker and Bill gates are both in the database more than once so I would like the output to be the following:
Bob Barker |2054|52377/97011/40019|235 Some road |9874
Bill Gates |5630|69471/55970 |014 Washington Rd.|3700
Steve Jobs |8501|73051 |100 Infinity St. |4901
John Doe |7149|86740 |7105 Bull Rd. |9282
Tim Boons |6370|60701 |852 Mnt. Creek Rd. |7059
Notice how Bob Barker & Bill Gates appends the tag row (the duplicated data) into one row instead of having multiple rows. This is because I do not want to have to check the previous ID and see if it matches the current id and append to the data.
View 2 Replies
View Related
Sep 28, 2007
I have tested the code below to remove duplicate table entries based on the field IntOOS. This code works; however, I want to ensure I am removing the oldest entries and keeping the most recent entry. The field to key on this would be something like Max(ID). What would be the best way to ensure I keep the most recent table entry?
/*** Removes duplicate rows from ampfm.rpt_AdtVisitDiag table
by Chuck King 20070928
***/
;WITH CTE
as
(
SELECT
ROW_NUMBER() OVER (Partition By IntOOS Order BY IntOOS) AS ROWID
,DischDate
,AdmDiagCode
,ID
,AdmDiagCodeDesc
,AdmittingDiagnosis
,AnyDx
,DischDx
,ECode
,IntOOS
,PrinDxAnesDesc
,PrinDxAnesInd
,PrinDxCode
,PrinDxCondDesc
,PrinDxCondInd
,PrinDxDesc
,PrinDxEqualsAdmDxYnu
,SecDx10AnesDesc
,SecDx10AnesInd
,SecDx10Code
,SecDx10CondDesc
,SecDx10CondInd
,SecDx10Description
,SecDx11AnesDesc
,SecDx11AnesInd
,SecDx11Code
,SecDx11CondDesc
,SecDx11CondInd
,SecDx11Description
,SecDx12AnesDesc
,SecDx12AnesInd
,SecDx12Code
,SecDx12CondDesc
,SecDx12CondInd
,SecDx12Description
,SecDx13AnesDesc
,SecDx13AnesInd
,SecDx13Code
,SecDx13CondDesc
,SecDx13CondInd
,SecDx13Description
,SecDx14AnesDesc
,SecDx14AnesInd
,SecDx14Code
,SecDx14CondDesc
,SecDx14CondInd
,SecDx14Description
,SecDx15Code
,SecDx15Description
,SecDx1AnesDesc
,SecDx1AnesInd
,SecDx1Code
,SecDx1CondDesc
,SecDx1CondInd
,SecDx1Description
,SecDx2AnesDesc
,SecDx2AnesInd
,SecDx2Code
,SecDx2CondDesc
,SecDx2CondInd
,SecDx2Description
,SecDx3AnesDesc
,SecDx3AnesInd
,SecDx3Code
,SecDx3CondDesc
,SecDx3CondInd
,SecDx3Description
,SecDx4AnesDesc
,SecDx4AnesInd
,SecDx4Code
,SecDx4CondDesc
,SecDx4CondInd
,SecDx4Description
,SecDx5AnesDesc
,SecDx5AnesInd
,SecDx5Code
,SecDx5CondDesc
,SecDx5CondInd
,SecDx5Description
,SecDx6AnesDesc
,SecDx6AnesInd
,SecDx6Code
,SecDx6CondDesc
,SecDx6CondInd
,SecDx6Description
,SecDx7AnesDesc
,SecDx7AnesInd
,SecDx7Code
,SecDx7CondDesc
,SecDx7CondInd
,SecDx7Description
,SecDx8AnesDesc
,SecDx8AnesInd
,SecDx8Code
,SecDx8CondDesc
,SecDx8CondInd
,SecDx8Description
,SecDx9AnesDesc
,SecDx9AnesInd
,SecDx9Code
,SecDx9CondDesc
,SecDx9CondInd
,SecDx9Description
,VisitTypeCode
,accountnumber
,DischVisitTypeCode
FROM ampfm.rpt_AdtVisitDiag
)
--Select * From CTE
Delete From CTE Where ROWID > 1
View 5 Replies
View Related
Apr 6, 2007
I have a form view that I am using to insert new data into a sql express database and would like to find a way to avoid attempting to insert a record if the key already exists. is there a way to do this with the formview insert command. Everything works great until I try to add a record with an already existing value in the unique key field, then it breaks.
View 1 Replies
View Related
Jan 21, 2007
ok, first, I know... I forgot to run a backup of the master database, and I forgot to run a script to caputure logins. Not that that is out of the way... I need to recreate the logins under the Securities tab below the databases. All the company databases have the user names and passwords assigned to them, but they are not able to login, because they are not able to authenticate to the SQL server first.
Is there a script that someone has that will copy the company database security info for the users and recreate them in the SQL security tab?
I know that I can rebuild them manually, but I need to delete them first in the application software, then delete them from the databases, and then recreate them in the application software... and as simple as that sounds... it is a slow moving process.
Any assistance would be greatly appreciated.
Thanks,
John
View 3 Replies
View Related
Jan 15, 2006
iam new to MS SQL 7 server...i have two tables in my database say Table1 and Table2 having a comman field--- Name String(30). I want that dual data entry should be made for any single entry. That is if a name is entered in Table1, then same entry should be automatically entered in table2
View 8 Replies
View Related
Apr 10, 2007
question... i heard a bit about Control Macro Generator but have not found much reading material on it. here at our company we have employees fill out a weekely timesheet and typically have clerks enter the information into the TM.PTA.00 (Project Timesheet with Rate/Amount Entry) and submit it that way. say we have this timesheet in a nice little excel sheet with columns that match the input boxes on the form, how can we get it to automatically input the data instead of having a person sit there and type it all in?
View 3 Replies
View Related
Apr 17, 2007
Hello Everyone,
I have a web form that allows the user to select a time to reserve. I am trying to make it so that when a user selects a date to schedule something (which i have working) a drop down list will fill with times that have not been reserved.
The data is stored in two tables: tblCalendar and tblTime. tblTime contains pkTimeID and times (which are all possible times to select from in half hour intervals). tblCalendar contains a few fields but timeID and date (which is in the format M/d/yyyy) are what I need to test against. timeID is the foreign key of pkTimeID.
Basically when the user selects the date, a function gets called that will run a SELECT statement to get the times available. All of this works, I am able to fill the ddl with all times available no matter what the date is or what has already been reserved. I want to check if a time has been already selected based on the date selected by the user and only allow times not selected to be listed.
After acheiving this I would like to prevent the immediate time before and immediate time after from being displayed because each reserved time will last for one hour but the data is stored in half hour increments.
Any help/suggestions/links will be greatly appreciated. If I need to provide anything else please let me know.
Thanks in advance,
Brian
View 3 Replies
View Related
Jun 1, 2000
Hi,
Do you have any idea if there is / where can I find web based data entry into SQL 7.0 database. What I'm looking for is something like Oracle Forms but for SQL 7.0.
Thanks in advance,
Boaz
View 1 Replies
View Related
Nov 23, 2007
hey folks,
i am looking for code to show the last entry of a database that has a unique field. for eg.. i have columns AREA, NAME, NUMBER. i need to show the last entry for each unique area.
so if there was 5 seperate areas, the table would show the last five entries for each area. anyone help?
View 6 Replies
View Related
Jun 19, 2008
Hello all,
I'm a newbie to SQL Server. I would like to practice/learn setting up web based data access. Using SQL Server 2005 and probably a sample database like AdventureWorks, I aim to create a web based interface that will allow for data access and data entry. I'm almost finished with a book about T-SQL, and I am starting to read the MS Implementation and Maintenance book, but where do I start to learn about creating the web interface? What technologies/languages are important? ADO.NET? VB.NET C#.NET?
Thanks in advance.
View 2 Replies
View Related
Mar 31, 2015
I have a query that pulls data by date so that I have every day of the month but I would like to group it by month so that I only have one entry per month. Can that be done?
View 2 Replies
View Related
