How Do I Tranfer A Previous Table And Its Data To The ASPNETDB.MDF In The Web Site Administration Tool.

Dec 29, 2006

How do I tranfer a previous table and its data to the ASPNETDB.MDF in the Web Site Administration tool. I've tried right, but I can't locate the database in the SQL server on my server. help please.

View 1 Replies


ADVERTISEMENT

Duplicate Data Entry When Using The ASP.NET Web Site Administration Tool For Logins

Nov 5, 2007

Hello All,

I am using the Web Site Administration Tool with the ASP.NET login controls to create/manage user logins & roles for my site.

I have exported the ASPNETDB.MDF into my SQL Database ready to use with my app. The problem that I'm having is that whenever I add a user, using either the Web Site Administration Tool or the Classes available in the code-behind. The entry is doubled up in the database.

This is not a problem when logging on....however, when it comes to deleting a user it will only take one of the entries out and leave the duplicate in there. So if the administrator has deleted a user from the app and then tried to create another one with the same UserName (Which whomever is well within his/her rights to be able to do), they cannot because the entry which has "stay behind" in the database conflicts with the entry.

Any help on this matter would be greatly apprieciated. If any more info on this matter is required please ask (It was quite hard to try and explain this :-)

View 1 Replies View Related

Error Using Web Site Administration Tool

Mar 7, 2007

I am getting the following error using the Web Site Administration
Tool.  I have created the database I want to use.  Please
help.Could not establish a connection to the database.
If you have not yet created the SQL Server database, exit the Web Site
Administration tool, use the aspnet_regsql command-line utility to
create and configure the database, and then return to this tool to set
the provider.

The utility either is not working or I do not know how to use it.

I have SQL 2005 Express and SQL 2000.  SQL 2000 is working
properly, not sure about SQL 2005.  I have been told to use SQL
2000 because that is what our server is using.  I am developing on
my server and when application works will port to our server.

Dee 

View 24 Replies View Related

Provider In Web Site Administration Tool

Jul 17, 2007

Hello,I'm trying to create new users and roles using the Web Site Administration Tool, tab Provider, but I get the following error message: Could not establish a connection to the database.If you have not yet created the SQL Server database, exit the Web SiteAdministration tool, use the aspnet_regsql command-line utility to create andconfigure the database, and then return to this tool to set the provider.Then I ran aspnet_regsql utility using default values in every screen, but I got the following error message: Setup failed.Exception:Unable to connect to SQL Server database.----------------------------------------Details of failure----------------------------------------System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) ...How can I solve this? Thanks 

View 5 Replies View Related

ASP .NET Web Site Administration Tool Problem

Sep 13, 2007

Hi,I have a problem when I use ASP .NET Web Application Administration tool. When I click the Security tab, I receive following message"There is a problem with your selected data store. This can be caused by an
invalid server name or credentials, or by insufficient permission. It can also
be caused by the role manager feature not being enabled. Click the button below
to be redirected to a page where you can choose a new data store. The following message may
help in diagnosing the problem: Unable to connect to SQL Server database."In the same page, there is a button to go to Provider section. I clicked it, and I went to the Provider page. There, there were two links, which were: "Select a single
provider for all site management data" and "Select a different provider for each feature
(advanced)". I clicked the earlier, and I was redirected to a page to select provider. There, there was a link, I clicked it and I receive following message:"
Provider
Management

Could
not establish a connection to the database. If you have not yet created the
SQL Server database, exit the Web Site Administration tool, use the
aspnet_regsql command-line utility to create and configure the database, and
then return to this tool to set the provider. "After reading this message, I opened Command Prompt and went to C:WINDOWSMicrosoft.NETFrameworkv2.0.50727. There, I ran the aspnet_regsql command, and then ASP .NET SQL Server Setup Wizard was displayed. In the first page of this wizard I chose "Configure SQL Server for application services" and then I clicked "Next" button. In the second page I left all fields as they were and then I clicke"Next". In the third page I only clicked "Next" and then some process ran. Finally, in the last page I received following message:"Setup failed.Exception:Unable to connect to SQL Server database.----------------------------------------Details of failure----------------------------------------System.Web.HttpException: Unable to connect to SQL Server database. ---> System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)   at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)   at System.Data.SqlClient.SqlConnection.Open()   at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)   --- End of inner exception stack trace ---   at System.Web.Management.SqlServices.GetSqlConnection(String server, String user, String password, Boolean trusted, String connectionString)   at System.Web.Management.SqlServices.SetupApplicationServices(String server, String user, String password, Boolean trusted, String connectionString, String database, String dbFileName, SqlFeatures features, Boolean install)   at System.Web.Management.SqlServices.Install(String database, SqlFeatures features, String connectionString)   at System.Web.Management.ConfirmPanel.Execute()"What should I do? I tried to use this administration tool on computer in my house and everything was just fine. Why do I have this problem in my office? 

View 6 Replies View Related

SQL Server 2005 Express And ASP.NET Web Site Administration Tool Problem.

Mar 31, 2006

I installed SQL Server 2005 Express Edition, I can login to it just fine using SQL Server Management Studio Express.  I ran the aspnet_regsql and it created the aspnetdb database.  But when I try to test the AspNetMembershipProvider or go to the Security tab in the ASP.NET Web Site Administration Tool it does not work.  I have tried messing with the connectionString of the LocalSqlServer in the machine.config, but to no avail.  My SQL Server is installed on the Default Instance.  Can someone help me get ASP.NET Web Site Administrator to work with my SQL Server 2005 Express Edition?

View 1 Replies View Related

Tranfer Data To The Another Table

Aug 11, 2005

hello..

my have 2 tables..

tak_1

and

tak_2


they have the same colums, they are twins

how to transfer datas from tak_1 to tak_2 ?

I need something like below
Quote:
transfer data (select * tak_1 where date='10.10.2004') to tak_2

View 6 Replies View Related

Tranfer Of Data In The Table From One Server To Another

Jun 14, 2007

I have SQL server 2005 in which I have two Server (1 & 2).


There is a table, userLookUp in a database of Server 1, with huge data.
I created a table, called userLookUp on server 2 with same number of colums and same dataType.Now I want to get the data from the table in the server1 to the table I have created in the server2.



How ?????



View 1 Replies View Related

SQL Database Administration Tool

Jun 26, 2005

Hi...
Does anybody know of an open source script I can download that will enable me to manage an SQL database? I basically need to access and modify the database from any machine that may not have SQL Enterprise Manager Installed. I was thinking of writing my own script to do this but I assumed that there is probably already one out there.

View 6 Replies View Related

Free Administration Tool For SQL SERVER 6.5

Mar 30, 2004

Hello,

I need an Administration tool for SQL SERVER 6.5 compatible with WINDOWS 2000.

When I try to search one with GOOGLE, I find none ...

If anyone can provide me with any solution, he (or she) will make me the most happy of the DBAs today ...

Thanks in advance

Al'

View 1 Replies View Related

MSDE 2000 Administration Tool

Jul 20, 2005

Hi all,I have installed MSDE on my computer but it's missing, as all you alreadyknow, a serious (well, osql IS TOO serious but not very newbie friendly)admin tool.I have downloaded http://www.asql.biz/DbaMgr.shtm and i'm quite happy withit but was wondering if there's something better or that may complete whatDbaMgr2k is missing... and preferably is as free as DbaMgr2k.Thank You,Lorenzo

View 2 Replies View Related

Auth Problem To SQL In Web Administration Tool

Apr 30, 2008

I am trying to set up the web administration for a website that uses login controls. I have set up the ASPNETDB database using the regular aspnet_regsql command on my SQLEXPRESS.




To set up the web admin tool, I created a vdir to point to %WINDIR%Microsoft.NETFrameworkv2.0.50727ASP.NETWebAdminFiles. This works absolutely fine. I also changed the configuration of this website to use the ASPNETDB on my SQLEXPRESS.

<add name="LocalSqlServer" connectionString="data source=.SQLEXPRESS;Integrated Security=SSPI;Initial Catalog=aspnetdb"
providerName="System.Data.SqlClient" />




This website also has impersonation enabled

<identity impersonate = "true" />




The administration website works fine till I click on the security tab, and I get the following error:

Cannot open database "aspnetdb" requested by the login. The login failed. Login failed for user 'HOMEASPNET'

What I don't understand is why the application is using the ASPNET account to connect to the database when impersonation is enabled. Isn't it supposed to use the credentials of the windows user? I read a couple of posts on MSDN which advise to explicitly create a login for the ASPNET user in the ASPNETDB database (which will definitely work) but somehow it seems counter-intuitive to me. Any advise anyone?

View 8 Replies View Related

SQL Server Express &&amp; Web Administration Tool

Nov 28, 2007

I am new to VWD, and web development. I installed VWD and SQL Server Express local.

I'm learning how to use the VWD with some of the walkthrough samples. It was going great until I got to the walkthrough where it show "how to use configure user and role with Web Site Admin Tool". I followed the walkthrough steps by step. I clicked the Security Tab and I got the following error:

"There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: Unable to connect to SQL Server database. "

I read some article. According to the articles, SQL Server Express will automatically create the asp database for the first time. but my SSE did not create the database.

What did you do wrong? Please help. Thank you

TCF

View 1 Replies View Related

Using ASPNETDB For All Site!

May 26, 2008

Hi all,
I`m a .NET desktop-app developer and i`m new to ASP.NET and web development, i start developping a web application with SQL Server database and i want to know if i can put all my tables in ASPNETDB?
is any restriction with that?
Regards

View 3 Replies View Related

Tranfer Data In One Table To Another Table.

Dec 29, 2006

This may be simple, I just want to tranfer about 15 columns of data into another table on the same database. The receiving database is empty, but has different column names. I'm guess I have to make sure the data type can hold the information being transfered. I'm using SQl Server 2005. Please help.

View 20 Replies View Related

Can Not Access Security Page On Web Administration Tool

Dec 1, 2006

I get the following error message when i click the Security tab on my websites' Administration tool. All the other tabs are working properly.
There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 1802 and the SqlException message is: CREATE DATABASE failed. Some file names listed could not be created. Check related errors. Cannot create file 'C:SAFETYDATABASEAPP_DATAASPNETDB_TMP.MDF' because it already exists. Change the file path or the file name, and retry the operation. Creating the ASPNETDB_652db56c1d7d4c9f94da67107d9c917a database...
Any help is appreciated.

View 1 Replies View Related

Web Admin Tool Can't Connect To Default Aspnetdb

Aug 21, 2007

I ran the command line tool C:WINDOWSMicrosoft.NETFrameworkv2.0.50727aspnet_regsql.exe.  Then I ran the web config tool and tried to test the default provider and it keeps saying it couldn't connect to the database.  The database exists in sqlExpress instance.  Any ideas?

View 18 Replies View Related

Web Site Admin Tool

Aug 24, 2006

Hi!
My problem is...i gut this errormessage in Web Site Administration Tool:
There is a problem with your selected data store. This can be caused by an invalid server name or credentials, or by insufficient permission. It can also be caused by the role manager feature not being enabled. Click the button below to be redirected to a page where you can choose a new data store. The following message may help in diagnosing the problem: The database filename can not contain the following 3 characters: [ (open square brace), ] (close square brace) and ' (single quote)
 
I recieved it after i try'ed to change the default Providers and use another DB then default. Now i want to go back to how it was from start, if i create a user and role - i want VS 2005 to create a SQL Express DB for me. Can anyone help me? I have even tryed to reinstalled VS 2005 but it didn't help.
/Bamsen

View 1 Replies View Related

Site Actitivy Tool

Oct 21, 2007

All,

What kind of tools do you use to monitor the site(SOC/NOC) activities?

What is your experience on the tools? Which one would you recommend?

View 3 Replies View Related

How To Tranfer Excel Data To Sqlserver2000 ?

Sep 29, 2005

In our project we r having a task such that to convert the excel data to sqlserver2000 . what is the procedure ? (Bulk amount of data )

View 2 Replies View Related

How To Tranfer Data Between Two Server Without REPLICATION???

Apr 21, 1999

I need to transfert data between two servers without replication, and using a stored procedure . Any Ideas. Thanks.

View 1 Replies View Related

Retrieve Data From Properties Field In Prifile Table In Aspnetdb.mdf For Multi Users ?

Mar 12, 2008

I want retrieve data from properties field in prifile table in aspnetdb.mdf for multi users,what do i ?

View 1 Replies View Related

Get Data For Previous Month In Table Based On Current Date

Jul 28, 2014

I need to get previous month data in the table based on current date.

In case of execution of each month, the data for previous month should come with date as between

create table TestDate
(Sno Int,
Name varchar(100),
DateofJoin datetime)

insert into TestDate values (1,'Raj', '2/21/2014')
insert into TestDate values (1,'Britto', '6/12/2014')
insert into TestDate values (1,'Kumar', '5/14/2014')
insert into TestDate values (1,'Selva', '6/27/2014')
insert into TestDate values (1,'Ravi', '5/2/2014')
insert into TestDate values (1,'Gopu', '6/2/2014')
/*

if I execute in month July ( ie: today)

select * from TestDate where dateofjoin between 1-june-2014 and 30-june-2014

Result

5 Ravi 2014-05-02 00:00:00.000
3 Kumar 2014-05-14 00:00:00.000

if I execute in month June

select * from TestDate where dateofjoin between 1-may-2014 and 30-may-2014

Result

6Gopu2014-06-02 00:00:00.000
2Britto2014-06-12 00:00:00.000
4Selva2014-06-27 00:00:00.000
/*

View 1 Replies View Related

New Table To ASPNetDb.mdf And Foreign Key

Nov 30, 2006

I was thinking of adding tables to ASPNetDB.mdf and have one of those tables have column userid as a foreign key from aspnet_Users
When I try to create relationship in Diagram, I get error saying that "data typ properties does not match"
userid in aspNet_Users is uniqueidentifier and userid (fk) in new table is int
What should I use, should I do that at all?
 
Thanks

View 4 Replies View Related

I Tried To Sign On To My Web Site Using The ASPnet_membership Table And Got A Error With My Table.

Jan 12, 2007

 This is the error that I got. Is it a Resevered Table name or something
Invalid column name 'LastLoginDate'.Invalid column name 'LastLoginDate'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Invalid column name 'LastLoginDate'.Invalid column name 'LastLoginDate'.Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

View 1 Replies View Related

Change Table Shema In Aspnetdb...

Mar 5, 2008

Hi,I have started an aspnetdb and it is now in use. It appears as though I "can" change the table structure, by this I mean I simply want to add a field, but can I get some feedback of the issues that this casue?Thanks,CES 

View 1 Replies View Related

Moved Aspnetdb To SQL Server - What Permissions Do I Need To Give The ASP IIS Service Account For That? (Getting: Cannot Open Database Aspnetdb Requested By The Login. The Login Failed.)

May 12, 2008

I am getting the error:
Cannot open database "aspnetdb" requested by the login. The login failed.
When I browse to my ASP.NET 3.5 LINQ web application on the IIS 6.0 server on Server 2003.
I imagine this is because while I granted SQL Server 2005 login and permissions to my database that the application stores its data in, I did NOT grant any rights to the service account the IIS Application Pool uses for its identity to the aspnetdb database on SQL Server which is where all my roles information is stored at.
My question is what are the MINIMUM permissions needed for this database so it can perform its roles related functions?
I'm using Windows Authentications with the SQL Role provider for authorization.
 
Thank you.
 
 
EDIT: I think I only need to open the aspnetdb database and add my login to the aspnet_Roles_FullAccess role.  Is that correct?

View 2 Replies View Related

Urget - Database Tranfer

May 4, 2001

hello

i want to tranfer the database from one machine to another machine,
which are not in one network.
so please tell me how to tranfer the database
it is urget

thank you.

dilraj

View 1 Replies View Related

Error Inserting Data In ASPNETDB.net

May 9, 2008

I created my own table on the ASPNETDB.mdf file.
When i try to insert data on it, i get an exception:
System.Data.SqlClient.SqlException was unhandled by user code  Message="String or binary data would be truncated.
The statement has been terminated."  Source=".Net SqlClient Data Provider"  ErrorCode=-2146232060  Class=16  LineNumber=1  Number=8152  Procedure=""  Server="\\.\pipe\33189AFE-4730-4B\tsql\query"....
My C# code to insert:SqlConnection conexao =
new SqlConnection(System.Configuration.ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString);
string query = "Insert Into NovasMaquinas " +"(NomeDaMaquina, FicheiroExecutavel, FicheiroXML, AdminQueSubmeteu, Autor, VmID)" +
"Values (@NomeDaMaquina, @FicheiroExecutavel, @FicheiroXML, @AdminQueSubmeteu, @Autor, @VmID)";SqlCommand cmd = new SqlCommand(query, conexao);
cmd.Parameters.AddWithValue("@NomeDaMaquina", textboxNomeVM.Text);cmd.Parameters.AddWithValue("@FicheiroExecutavel", path + fileUploadEXE.PostedFile.FileName);
cmd.Parameters.AddWithValue("@FicheiroXML", path + fileUploadEXE.PostedFile.FileName);cmd.Parameters.AddWithValue("@AdminQueSubmeteu", User.Identity.Name);
cmd.Parameters.AddWithValue("@Autor", textboxAutorVM.Text);cmd.Parameters.AddWithValue("@VmID", Guid.NewGuid().ToString());
conexao.Open();
//cmd.CommandType = CommandType.Text;
cmd.ExecuteNonQuery();    //THAT IS THE LINE WHERE THE EXCEPTION IS THROWN
conexao.Close();
 
Any ideas wath i'm doing wrong?
 

View 2 Replies View Related

Unable To Tranfer Jobs From Sql2000 To Sql2005

Nov 20, 2007

Hi

Im in the process of upgrading my sqlserver 2000 to 2005.I want to migrate all the jobs from sql2000 to 2005.
I scripted the job (right click job--->all tasks--->generate sqlscript).
I ran the same script on sql2005,i was getting an error like this


"Msg 515, Level 16, State 2, Procedure sp_add_job, Line 137

Cannot insert the value NULL into column 'owner_sid', table 'msdb.dbo.sysjobs'; column does not allow nulls. INSERT fails.

The statement has been terminated."

What does the error mean? cant i run the same script generated in sql2000 on sql2005.
Wht is the approach to transfer the jobs from sql2000 to sql2005 ?
I know ther is one more way i can transfer.It is through sqlserver business intelligence development studio and using transfer job task.But i dont want to use that.I want to script the job and execute it on sql2005.

Regards
Arvind

View 14 Replies View Related

Replace LoginName Control With Other Data Fields From Aspnetdb.mdf

Nov 12, 2007

I currently have a LoginStatus and LoginName control on my asp.net 2.0 master page.  When successfully logged in a message displays "You are logged in as" LoginName.  Since I am using the user's e-mail address as the UserName the message will display as "You are logged in as johndoe@foo.com".
What I want to do is have the message display as "You are logged in as " FirstName LastName.  FirstName and LastName are two new fields that I added to the table, aspnet_Users.
What I have done is to use the FormView control to display FirstName and LastName; however this always displays the first record in the aspnetdb database.
Is there a cleaner way (than the FormView control) to display the requested data, using the currently logged in user?  I have access to Microsoft Expression Web and Visual Studio 2005, but I prefer Expression Web.
Thank you in advance

View 1 Replies View Related

How To Get The Previous And Next IDs From A Table

May 21, 2007

I have a table that holds images. I want to get the previous image id and the next image id based on the current ID:

ImageID

4
21
56
74
99

So if the current image ID is "21" I'd like to return 4 and 56.

Thanks!!

View 3 Replies View Related

Data Driven Site

Jan 19, 2007

I have a question has anyone seen a Webbased Database made with Frontpage 2003 before???

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved