Duplicate MAC In Current Activity -> Process Info

Jun 15, 2001

Just recently I noticed something that I consider very strange on a SQL7.0 server with SP1.

In [Server -> Management -> Current Activity -> Process Info] I see a great number of rows(connections) around 70 or so that all have the same net_address value. However, the nt_loginame is different on each.

Q1: How can this be?
Q2: Isn't the net_address really the MAC of the network card?

Also, on a test SQL7.0 server with SP1 where the connections are far less (around 15 or so), I noticed the same problem. Luckily, because the connection count is low I was able to go around to each machine where the nt_loginame was used to log on and found that the net_address shown in [Current Acivity] didn't match any of these machines. Why?

-John

View 1 Replies


ADVERTISEMENT

Current Activity - Process Info

Jan 12, 2007

Hi, please i need to know where sql save (table) the info that i see in Managment/Current Activity - Process Info
thanks so much

View 4 Replies View Related

Managment/ Current Activity / Process Info

Jan 12, 2007

Hi, I need to know where SQL save the info that I see in the Managment/ Current Activity / Process Info

thanks so much

View 2 Replies View Related

Process Info (SQL Server Enterprise - Management - Current Activity)

Jul 23, 2005

Dear AllI have problem with my database server which running SQL server 2000.The server running very slow. The worst case, to save a record requiredmore than 20-30 seconds.Since this problem, I usually monitoring Process Info from EnterpriseManager (Management - Current Activity), and I found a misteriousprocess as follow :1. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerWaiting: >438 Million2. User: SystemAccessTo: MasterStatus: BackgroundCommon: Task ManagerPhysical IO: > 510003. User: Administrator (Join domain)Database: MSDBStatus: SleepingCommon: Awaiting CommandApp: SQL Agent Alert EngineCPU Usage: > 16 MillionAnybody know about these condition? Does it normal?ThanksMichael

View 3 Replies View Related

Current Activity

Apr 17, 2000

I have registered a server on to my client machine successfully,but I am not finding the current activity item in the management folder on EM.How do I see the current activity on the server.Do I need to be SA for that server?My machine has NT workstation with SQL server 7.0 on it.Any one to help?

View 1 Replies View Related

Current Activity Not Available? 6.5

Aug 12, 1999

When viewing Current Activity, nothing shows up.

If i run sp_who, the return is normal.

If I run sp_who2, the following message is returned. (it also is returned randomly while using function in EM such as Backup/Restore.)

Msg 268, Level 16, State 1
You cannot run SELECT INTO in this database. The DBO would have to run sp_dboption to enable this option.


What is it??? It's buggin me......

Dano

p.s. I remember a similar problem in the past, it had to do with turning truncate on checkpoint in one of the system databases msdb/master/tempdb or something like that. I turned off all Trunc. and Select/Bulk options on these...

View 2 Replies View Related

Change Login-Info For Activity-Monitor And Sp_who

Sep 26, 2007

Hi

we have one 'application'-user in sysusers that makes the connect to SqlServer for all users, for example:

Application Login-User: Thomas
DB-Connect-User: AppUser

With this solution, in Activity-Monitor or with sp_who I don't know, what is the real name of the connected user.
Any possibility to change the login-information after the connect, so that i can see 'Thomas' in Activity-Monitor or with sp_who?

Thanks for your help.
Thomas

View 4 Replies View Related

Cannot View Current Activity In EM

Nov 20, 2002

Trying to view current activity in EM however get error 1222 Lock request time out period exceeded, this also occurs when trying to view tempdb database.

Is this a EM Gui error or locking issue and hwo do you resolve?

Thanks

GaryW

View 5 Replies View Related

Current Activity Window

Sep 24, 1999

Hi,

On sql server 6.5 running on a win/nt platform my Current Activity window comes up blank when I click on it. Everything else seems to be working fine. This is a new problem, it just stopped reporting any info when I click on it.
Any suggestions would be greatly appreciated.

Thanks,

Jerry

View 2 Replies View Related

Current Activity Tool

Nov 3, 1998

Hi there!
in the ms-enterprise manager , the current activity.. under server menu
does not display anything in one of the server in EM but in other
servers it is okay.

any inputs?

thanks.

joe

View 3 Replies View Related

Current Activity = 0 And Still Sql Server Use All CPU And Memory ?

Mar 28, 2001

What to check on NT or Sql server it self
if
1. NT performance shows that sql serve.exe -CPU 93% memory 49000
2. Sql server current activity only sa connected to master.
Thanks

View 2 Replies View Related

SQL Enterprise Manager - Current Activity...

Jul 17, 2007

If you're passing a query from outside of SQL Server into one of your databases - is it possible to monitor the Query being processed?



I have a third party program that queries one of my databases.



Curreny activity within Enterprise manager seems to be the only thing relating to my problem.



Thanks,

i

View 1 Replies View Related

Locked Out Of Enterprise Manager "Current Activity"

Mar 5, 2001

Hi,

In SQL Server 7.0 Enterprise Manager | node-name | Management | Current Activity, if I try to refresh the current activity or view the current activity data, I get a hourglass for several minutes, then an error message box that says:

Error 3621: Lock request time out period exceeded. The statement has been terminated.
The statement has been terminated. [OK].

I need to see the current activity to check on blocking, etc.

Help!, please.

Boog

View 3 Replies View Related

Want To Block All Other Db Activity While My Archive Process Is Running...

Oct 29, 2007

i'd like to block all other processes that interact with my database while my archive process is running on that database. Can this be done?

View 4 Replies View Related

Pulling Info From The Current Row Of One Dataset Into Another

Sep 6, 2007

This is day 1 of me ever using RS so forgive ignorance of the topic.

Here's the basic scenario:

Input parameter from the user is an Account name.

For that account name I want to list Addresses of locations under the account, and then for each of those, I want to list received shipments from the address.

So Ideally the result is:



Account Name

Address 1


Shipment 1
Shipment 2
Shipment 3

Address 2


Shipment 1
Shipment 2

Address 3


Shipment 1

So, I am able to list the addresses just fine, but the next step is getting the stuff from the shipments table based on the currently running address? I'm probably saying that poorly. What I need to know is how do I structure the dataset/report to accomplish this. I suppose I could combine the query for the shipments with the query for the addresses, but that seems suboptimal to me.

TIA for the help.

View 1 Replies View Related

Process Info

Jan 11, 2005

I want to check who access the database in the sql server. When i go to current activity then process info. I found not all the users who access the database are displayed. Even though i refresh it. It didn't show up. But i am sure some user was accessing the database. Anybody know why, how can i avoid it. Thanks.

View 2 Replies View Related

Question About Process Info

Jul 27, 2004

Hello, i just check the process Info in the sql server enterprise manager, I found two same user but different host (such as host1 and host2), and also i have update problem that write confilct error messager (i use access as front end and sql server as back end)
Does the two process cause problem? Actually i found the host2 computer actually is dead, why that host appear in the process Info, any body has idea? Thanks in advance.

View 5 Replies View Related

Process Info: # Of Connnections

Dec 3, 2004

I have a SQLServer that gets accessed by some medical software through Citrix. So there are about 100 users at any point in time,but I can see 650+ Processes in Current Activity->Process Info in Enterprise Manager.

The company is complaining that if they dont reboot their SQL Server everyday it gets too slow to use. Does the # of Processes have any relation to their preformance issues?

View 5 Replies View Related

What Am I Really Looking At In The Process Info Window?

Mar 20, 2006

I had a clients dba send me a peice of sql from the Last T-SQL command window from the process info screen under current activity in the enterprise mangler. It was a select query from a large table with no where clause.I setup profiler for all of the xxxx:completed events for the T-SQL and Stored Procedure Event Classes. I played with that part of the app for a while. I could not find my sql in the trace. I finally gave in and open the Mangler and I was able to reproduce it once but I still could not find the sql profiler. It is not in syscomments and I have a developer running a FIND in the app code.EDIT: I know the sql the query processor uses is not always the sql you send it.I am kind of confused about what that window shows I rarely use it for something like that. Anyone have any light to shed?

View 5 Replies View Related

EnterpriseManager--&>Process Info Screen

Oct 21, 2005

SQL 2000 SP3================================================In reviewing this screen, I have SPIDS > 100 that have a status ofsleeping, command = AWAITING COMMAND and login/batch dates that areweeks old ... Shouldn't this list be more recent activity only ?Thanks,Craig

View 1 Replies View Related

T-SQL (SS2K8) :: Table With Score Info For Groups - Ranking For Current And Previous Week

Jan 21, 2015

I have a table with score info for each group, and the table also contains historical data, I need to get the ranking for the current week and previous week, here is what I did and the result is apparently wrong:

select CurRank = row_number() OVER (ORDER BY cr.CurScore desc) , cr.group_name,cr.CurScore
, lastWeek.PreRank, lastWeek.group_name,lastWeek.PreScore
from
(select group_name,
Avg(case when datediff(day, asAtDate, getdate()) <= 7 then sumscore else 0 end) as CurScore

[Code] ....

The query consists two parts: from current week and previous week respectively. Each part returns correct result, the final merged result is wrong.

View 3 Replies View Related

Deleting Killed Processes From Current Process

Aug 25, 2005

When I was trying to get my maintenance plans to work there were many processes I had to kill. These processes were killed over a week ago but they still list in the Current Activity | Process Info list. Under Command it says "Killed/Rollback". If I go into QA and run kill 65 with statusonly it says the process is complete. How do I get these processes off the list?

View 4 Replies View Related

A Floating Point Exception Occurred In The User Process. Current Transaction Is Canceled.

Jul 23, 2005

Hi,I'm running SQL Server Version 8.00.194 on Windows 2000.I am am running this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'and TheoVolImplied > 0.0TheoVolImplied is of type float, precision 15, length 8.When I run this query I get this error:Server: Msg 3628, Level 16, State 1, Line 1A floating point exception occurred in the user process. Currenttransaction is canceled.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere TheoVolImplied > 0.0It works fine with no problems.If I run this query:select TOP 2000TheoVolImpliedfrom OptionTradeswhere ReutersSymbol = 'IBM.N'It works fine with no problems.Anyone have any ideas about what might be wrong?

View 2 Replies View Related

Transact SQL :: How To Compare Duplicate Rows Within A Unique Process

Nov 9, 2015

We write to a log file each time a job runs. We give each job a unique batchid. I want to compare the run times of each step/record between two batch ids: '20150101888' and '20150101777'. Column Mins in the number of minutes each step ran. I am having trouble comparing the rows that have generic process and stepname – Trans Switch in this example. A new process within a batchid starts with a 'XX', 'Load'.

So I want to compare CA's Trans to CA's Tran Switch and ER's Trans Switch to ER's, etc. There can be multiple Trans Switch per process. There should be the same number between each batch, but no guarantees that  something might change. Also, Trans Switch is not the record right after the new process (CA, ER) in production.

I have just made a very simplified example.

/**
Want to compare 20150101888 to 20150101777 and end up with this result set. Notice that the duplicate process/step within a process has the process (CA and ER in this example) and a sequential number added to it: 'CA Trans 1'. Need this to pull out the largest time differences.

Time difference, process, step, mins1, mins2, batchid1, batchid2
-6, CA, Load, 17, 23, 20150101888, 20150101777
0, CA Trans 1, Switch, 8, 8, 20150101888, 20150101777
-6, CA Trans 2, Switch, 9, 15, 20150101888, 20150101777
-4, ER, Load, 7, 11, 20150101888, 20150101777
-4, ER Trans 1, Switch, 7, 11, 20150101888, 20150101777

**/

[Code] ....

View 4 Replies View Related

Is There A System Table With Timestamp Info Or DTS Job Info?

May 7, 2007

I want to be able to see when records have been added to a table. The issue is we have a DTS job scheduled to run every night. The developer who wrote it password protected it and doesn't work here anymore. I want to add a step to this series of DTS jobs and want to run it just prior to his job. Is there a way to see when the records are being added or when this job is being run? Thanks again, you guys are the best.

ddave

View 3 Replies View Related

Get Rows Between Current Date And Current Time

Jun 8, 2008

I've this query
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)

Let's say, current date is 8 AUG 2005 and current time is 2045
So, i will get
ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
206 | 8/1/2005| 1950 | 88
...
...
207 | 8/7/2005| 1845 | 77
208 | 8/7/2005| 2255 | 77
209 | 8/7/2005| 2140 | 77

Can someone can show me to filter data between
t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND TIME>=CurrentTime
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101) AND TIME<=CurrentTime

If current date is 8 AUG 2005 and current time is 2045, so the result shown as follow

ID | Date (this is datetime) | Time (this is integer) | Value
--------------------------------------------------
204 | 8/1/2005| 2359 | 90
205 | 8/1/2005| 2250 | 99
...
...
207 | 8/7/2005| 1845 | 77

I only have this query,
SELECT
t1.ID, t1.Date, t1.Time,
t1.VALUE
FROM RESULT WHERE t1.Date>=CONVERT(VARCHAR(10),DATEADD(d,-7,GETDATE()),101) AND
t1.Date<CONVERT(VARCHAR(10), GETDATE(), 101)

lack of idea to put the TIME condition.

Plz help me..

View 14 Replies View Related

Transaction (Process ID 135) Was Deadlocked On Lock Resources With Another Process And Has Been Chosen As The Deadlock Victim.

Nov 14, 2007



Hi,

I was trying to extract data from the source server using OLEDB Source and SQL Server Destination when i encountered this error:

"Transaction (Process ID 135) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.".

What must be done so that even if the table being queried is locked, i wouldn't experience any deadlock?

cherriesh

View 4 Replies View Related

FCB::Open: Operating System Error 32(The Process Cannot Access The File Because It Is Being Used By Another Process.) Occurred W

Dec 3, 2007

Hello all,
I am running into an interesting scenario on my desktop. I'm running developer edition on Windows XP Professional (9.00.3042.00 SP2 Developer Edition). OS is autopatched via corporate policy and I saw some patches go in last week. This machine is also a hand-me-down so I don't have a clean install of the databases on the machine but I am local admin.

So, starting last week after a forced remote reboot (also a policy) I noticed a few of the databases didn't start back up. I chalked it up to the hard shutdown and went along my merry way. Friday however I know I shut my machine down nicely and this morning when I booted up, I was in the same state I was last Wenesday. 7 of the 18 databases on my machine came up with

FCB:pen: Operating system error 32(The process cannot access the file because it is being used by another process.) occurred while creating or opening file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf'. Diagnose and correct the operating system error, and retry the operation.
and it also logs
FCB:pen failed: Could not open file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataTest.mdf for file number 1. OS error: 32(The process cannot access the file because it is being used by another process.).

I've caught references to the auto close feature being a possible culprit, no dice as the databases in question are set to False. Recovery mode varies on the databases from Simple to Full. If I cycle the SQL Server service, whatever transient issue it was having with those files is gone.
As much as I'd love to disable the virus scanner, network security would not be amused. The data and log files appear to have the same permissions as unaffected database files. Nothing's set to read only or archive as I've caught on other forums as possible gremlins. I have sufficient disk space and the databases are set for unrestricted growth.

Any thoughts on what I could look at? If it was everything coming up in RECOVERY_PENDING it's make more sense to me than a hit or miss type of thing I'm experiencing now.

View 13 Replies View Related

[Execute Process Task] Error:The Process Exit Code Was -1 While The Expected Was 0.

Mar 11, 2008

Dear list
Im designing a package that uses Microsofts preplog.exe to prepare web log files to be imported into SQL Server

What Im trying to do is convert this cmd that works into an execute process task
D:SSIS ProcessPrepweblogProcessLoad>preplog ex.log > out.log
the above dos cmd works 100%



However when I use the Execute Process Task I get this error
[Execute Process Task] Error: In Executing "D:SSIS ProcessPrepweblogProcessLoadpreplog.exe" "" at "D:SSIS ProcessPrepweblogProcessLoad", The process exit code was "-1" while the expected was "0".

There are two package varaibles
User::gsPreplogInput = ex.log
User::gsPreplogOutput = out.log

Here are the task properties
RequireFullFileName = True
Executable = D:SSIS ProcessPrepweblogProcessLoadpreplog.exe
Arguments =
WorkingDirectory = D:SSIS ProcessPrepweblogProcessLoad
StandardInputVariable = User::gsPreplogInput
StandardOutputVariable = User::gsPreplogOutput
StandardErrorVariable =
FailTaskIfReturnCodeIsNotSuccessValue = True
SuccessValue = 0
TimeOut = 0

thanks in advance
Dave

View 1 Replies View Related

Execute Process Task Error - The Process Exit Code Was 1 While The Expected Was 0.

Jan 30, 2007

How do I use the execute process task? I am trying to unzip the file using the freeware PZUnzip.exe and I tried to place the entire command in a batch file and specified the working directory as the location of the batch file, but the task fails with the error:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC0029151 at Unzip download file, Execute Process Task: In Executing "C:ETLPOSDataIngramWeeklyUnzip.bat" "" at "C:ETLPOSDataIngramWeekly", The process exit code was "1" while the expected was "0".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

Then I tried to specify the exe directly in the Executable property and the agruments as the location of the zip file and the directory to unzip the files in, but this time it fails with the following message:

SSIS package "IngramWeeklyPOS.dtsx" starting.

Error: 0xC002F304 at Unzip download file, Execute Process Task: An error occurred with the following error message: "%1 is not a valid Win32 application".

Task failed: Unzip download file

SSIS package "IngramWeeklyPOS.dtsx" finished: Success.

The command in the batch file when run from the command line works perfectly and unzips the file, so there is absolutely no problem with the command, I believe it is just the set up of the variables on the execute process task editor under Process. Any input on resolving this will be much appreciated.

Thanks,

Monisha

View 1 Replies View Related

Execute Process Task - Error :The Process Exit Code Was 2 While The Expected Was 0.

Mar 20, 2008



I am designing a utility which will keep two similar databases in sync. In other words, copying the new data from db1 to db2 and updating the old data from db1 to db2.

For this I am making use of the 'Tablediff' utility which when provided with server name, database, table info will generate .sql file which can be used to keep the target table in sync with the source table.

I am using the Execute Process Task and the process parameters I am providing are:



WorkingDirectory : C:Program Files (x86)Microsoft SQL Server90COM
Executable : C:SQL_bat_FilesSQL5TC_CTIcustomer.bat

The customer.bat file will have the following code:
tablediff -sourceserver "LV-SQL5" -sourcedatabase "TC_CTI" -sourcetable "CUSTOMER_1" -destinationserver "LV-SQL2" -destinationdatabase "TC_CTI" -destinationtable "CUSTOMER" -f "c:SQL_bat_Filessql5TC_CTIsql_filescustomer1"

the .sql file will be generated at: C:SQL_bat_Filessql5TC_CTIsql_filescustomer1.

The Problem:
The Execute Process Task is working fine, ie., the tables are being compared correctly and the .SQL file is being generated as desired. But the task as such is reporting faliure with the following error :

[Execute Process Task] Error: In Executing "C:SQL_bat_FilesSQL5TC_CTIpackage_occurrence.bat" "" at "C:Program Files (x86)Microsoft SQL Server90COM", The process exit code was "2" while the expected was "0". ]

Some of you may suggest to just set the ForceExecutionResult = Success (infact this is what I am doing now just to get the program working), but, this is not what I desire.

Can anyone help ?




View 9 Replies View Related

Integration Services :: Dataload Process - Error Capturing Process

Aug 20, 2014

I'm pulling data from Oracle db and load into MS-SQL 2008.For my data type checks during the data load process, what are options to ensure that the data being processed wouldn't fail. such that I can verify first in-hand with the target type of data and then if its valid format load it into destination table else mark it with error flag and push into errors table... All this at the row level.One way I can think of is to load into a staging table then get the source & destination table -column data types, compare them and proceed.

should I just try loading the data directly and if it fails try trouble shooting(which could be a difficult task as I wouldn't know what caused error...)

View 3 Replies View Related

Transaction (Process ID 66) Was Deadlocked On Lock Resources With Another Process.

Feb 14, 2007

Hi Folks,

I am having this table locking issue that I need to start paying attention to as its getting more frequent.

The problem is that the data in the tables is live finance data that needs to be changed and viewed almost real time so what I have picked up so far is that using 'table Hints' may not be a good idea.

I have a guy at work telling me that introducing a data access layer is the only way to solve this, I am not convinced but havnt enough knowledge to back my own feeling up. (asp system not .net).

Thanks in advance

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved