Dynamic ORDER BY Within Stored Procedure

Jul 7, 2004

I am trying to do something similar to the following where I want to perform dynamic ordering on two tables that have been unioned as shown below.








CREATE PROCEDURE procedure_name


@regNum varchar(14),


@sortOrder tinyint = 1


AS


SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',


Obs_Date As 'Observation Date'


FROM tblSPG_Header


WHERE


REG = @regNum


UNION


SELECT Filler_OrdNum As 'Accession', RTrim(Obs_Code) As 'Observation', REG As 'Register',


Obs_Date As 'Observation Date'


FROM tblRCH_Header


WHERE


REG = @regNum


ORDER BY Obs_Date DESC


GO








Note that I am only sorting on the Obs_Date column, but I'd like to be able to sort on any column within the selection list. I know that I need to use:








ORDER BY CASE WHEN @sortOrder = 1 THEN Obs_Date END DESC








but I frequently get the following error when I try to do so:





"ORDER BY items must appear in the select list if the statements contain a UNION operator"





If anyone can offer any suggestions, I would appreciate it. Thanks.

View 1 Replies


ADVERTISEMENT

Dynamic Order BY In Stored Procedure

Sep 28, 2012

I can't figure out why this won't work. I want to use a variable for the 'ORDER BY' in my Stored Procedure.

I use this to order my results by product price or alphabetically from a dropdown menu. I have tried the following, but get the error below.

Code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER procedure [dbo].[SPResults]

[Code] ....

Code:
Msg 1008, Level 16, State 1, Procedure SPResults, Line 21

The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name. Is this possible to do?

View 3 Replies View Related

Dynamic ORDER BY In Stored Procedure

Apr 28, 2008

Hello,

I have this stored procedure:
SELECT * from purchase
ORDER BY
CASE @OrderBy
WHEN 'traveller_name' THEN cast(traveller_name as nvarchar(100))
WHEN 'canceled' THEN cast(canceled as bit)
END

the @OrderBy is a nvarchar(100) parameter
traveller_name is an nvarchar(100) field
canceled is a bit field


When I execute the stored procedure it works fine until I execute it sorting by canceled field. After that, I cannot sort it again using the traveller_name field. I get this eror:
Conversion failed when converting the nvarchar value 'Jason' to data type bit.
(Jason is a record in the traveller_name)
Removing the castings and sorting by just the column name does not help.

Any ideas?
Thank you

View 7 Replies View Related

Dynamic Sql Where And Order By Clauses In Stored Procedure

Feb 17, 2008

Hi, I hope some one can help me. I have a stored procedure (Microsoft SQL 2005 Express Edition) that I want users to be able to dynamically set the, group by, order by (@orderby) and where clause (@where). I have managed to get the group by to work but can't seem to get the where and order by to work. Here's my stored procedure. Any idea how this can be done? ALTER PROCEDURE [dbo].[sp_aggregate]     -- Add the parameters for the stored procedure here @finfileid int,     @phaseid int, @supplierid int, @measurementid int, @roleid int, @groupby int, @orderby int, @where int AS BEGIN     -- SET NOCOUNT ON added to prevent extra result sets from     -- interfering with SELECT statements.     SET NOCOUNT ON;     -- Insert statements for procedure here     SELECT     MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsMonthId) AS ProjFinFileMonthItemsMonthId,                       SUM(ProjectFinFileMonthItems.ProjFinFileMonthItemsValue * ProjectFinFileMonthItems.ProjFinFileMonthItemsRate * ProjectFinFileMonthItems.ProjFinFileMonthItemsAvail                        / 100) AS total, MAX(ProjectFinFileItems.ProjPhaseId) AS phaseid, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS deliveid, MAX(ProjectFinFileMonthItems.SupplierId)                       AS supplierid, MAX(ProjectFinFileMonthItems.ProjFinFileItemsId) AS ProjFinFileItemsId, MAX(ProjectFinFileMonthItems.ProjFinFileMonthItemsId)                       AS ProjFinFileMonthItemsId, MAX(ProjectFinFileMonthItems.ProjDeliveId) AS ProjDeliveId, MAX(ProjectPhases.ProjectPhaseName) AS ProjectPhaseName,                       MAX(Suppliers.SupplierName) AS SupplierName, MAX(ProjectFinFileMonthItems.RoleId) AS RoleId, MAX(Measurements.MeasurementName) AS MeasurementName,                       MAX(ProjectFinFileMonthItems.MeasurementId) AS MeasurementId, MAX(ProjectFinFileMonthItems.FinDataTypeId) AS FinDataTypeId,                       MAX(FinDataTypes.FinDataTypeName) AS FinDataTypeName, max(ProjectFinFileItems.FinFileId) as finfileid FROM         ProjectFinFileItems INNER JOIN                       ProjectFinFileMonthItems ON ProjectFinFileItems.ProjFinFileItemsId = ProjectFinFileMonthItems.ProjFinFileItemsId LEFT OUTER JOIN                       FinDataTypes ON ProjectFinFileMonthItems.FinDataTypeId = FinDataTypes.FinDataTypeId LEFT OUTER JOIN                       Measurements ON ProjectFinFileMonthItems.MeasurementId = Measurements.MeasurementId LEFT OUTER JOIN                       Roles ON ProjectFinFileMonthItems.RoleId = Roles.RoleId LEFT OUTER JOIN                       ProjectPhases ON ProjectFinFileItems.ProjPhaseId = ProjectPhases.ProjectPhaseId LEFT OUTER JOIN                       Suppliers ON ProjectFinFileMonthItems.SupplierId = Suppliers.SupplierId /*dynamic where clause needs to go here */ /*dynamic group by clause */ GROUP BY CASE when @groupby=1 then ProjectFinFileItems.projphaseid  --phaseid when @groupby=2 then ProjectFinFileMonthItems.supplierid -- supplierid when @groupby=3 then ProjectFinFileMonthItems.measurementid -- measurment when @groupby=4 then ProjectFinFileMonthItems.roleid --role else ProjectFinFileMonthItems.ProjFinFileMonthItemsId END /*dynamic order clause needs to go here */ END cheers Mark :)

View 2 Replies View Related

How To Add Order Item Into A Purchase Order Using A Stored Procedure/Trigger?

Jan 4, 2008

Hey guys, i need to find out how can i add order items under a Purchase Order number.
My table relationship is PurchaseOrder ->PurchaseOrderItem.

below is a Stored Procedure that i have wrote in creating a PO:



CREATE PROC spCreatePO (@SupplierID SmallInt, @date datetime, @POno SmallInt OUTPUT)

AS

BEGIN

INSERT INTO PurchaseOrder (PurchaseOrderDate, SupplierID) VALUES(@date, @SupplierID)

END



SET @POno = @@IDENTITY

RETURN


However, how do i make it that it will automatically adds item under the POno being gernerated? can i use a trigger so that whenever a Insert for PO is success, it automaticallys proceed to adding the items into the table PurcahseOrderItem?


CREATE TRIGGER trgInsertPOItem

ON PurchaseOrderItem

FOR INSERT

AS

BEGIN


'What do i entered???'
END

RETURN


help is needed asap! thanks!

View 14 Replies View Related

SQL Server 2012 :: Executing Dynamic Stored Procedure From A Stored Procedure?

Sep 26, 2014

I have a stored procedure and in that I will be calling a stored procedure. Now, based on the parameter value I will get stored procedure name to be executed. how to execute dynamic sp in a stored rocedure

at present it is like EXECUTE usp_print_list_full @ID, @TNumber, @ErrMsg OUTPUT

I want to do like EXECUTE @SpName @ID, @TNumber, @ErrMsg OUTPUT

View 3 Replies View Related

Two Order By's In Same Stored Procedure?

Jul 20, 2005

Is it possible to have to ORDER BY statements in the same storedprocedure?I am trying to use the same stored procedure for two different pagesbut the data returned needs to sorted DESC on one page and ASC onanother. Below is my SP:CREATE procedure sp_getLeads@p_SortType int,@p_PropID intASSELECT ID, PropID, Name, StatusFROM LeadsWHERE PropID = @p_PropIDIF @p_SortType = '1'(ORDER BY DateCreated DESC)ELSEIF @p_SortType = '2'(ORDER BY DateCreated ASC)ENDRETURN 1GOCan someone tell me what I am doing wrong?

View 1 Replies View Related

Multiple Stored Procedure...or 1 Dynamic Procedure?

Jul 3, 2007

Ok, so i have this program, and at the moment, it generates an sql statement based on an array of db fields, and an array of values...

my question is this, is there any way to create a stored procedure that has multiple dynamic colums, where the amount of colums could change based on how many are in the array, and therefore passed by parameters...

if this is possible, is it then better the pass both columns and values as parameters, (some have over 50 columns)...or just create a seperate stored procedure for each scenario?? i have no worked out how many this could be, but there is 6 different arrays of colums, 3 possible methods (update, insert and select), and 2 options for each of those 24...so possibly upto 48 stored procs...

this post has just realised how deep in im getting. i might just leave it as it is, and have it done in my application...

but my original question stands, is there any way to add a dynamic colums to a stored proc, but there could be a different number of colums to update or insert into, depending on an array??

Cheers,
Justin

View 2 Replies View Related

Stored Procedure With Order By Variable

Mar 5, 2008

I am trying to create a stored procedure that is sent a column name and orders by the column name.   conn = New SqlConnection(SQLserver)SQL = New SqlCommand("SearchECN", conn)
SQL.CommandType = CommandType.StoredProcedure
SQL.Parameters.Add("@Search", SqlDbType.Variant)SQL.Parameters.Add("@Sort", SqlDbType.Variant)
SQL.Parameters(0).Value = Search.Text
SQL.Parameters(1).Value = "ECN.ECN"
SQL.Connection.Open()
GVECN.DataSource = SQL.ExecuteReader()
GVECN.DataBind()
SQL.Connection.Close()
SQL.Connection.Dispose()
 
Stored Procedure
@Search NVARCHAR(MAX),
@Sort NVARCHAR(MAX)
SELECT ECN.ECN, ECN.A, ECN.B FROM ECN WHERE ECN.ECN LIKE @Search OR ECN.A LIKE @Search ORDER BY @Sort
I get the following error
Msg 1008, Level 16, State 1, Line 10
The SELECT item identified by the ORDER BY number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
 
Any Ideas

View 10 Replies View Related

ORDER BY Command In SQL Stored Procedure

Nov 5, 2003

How do you use a variable in the ORDER BY command in a sql statement.
I currently have:
****************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%'
)
As

SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost

FROM
SS_Sendback

WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO

GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO

ORDER BY
SS_Sendback.PO
GO
*************************************
I changed it to
*************************************
CREATE Procedure SS_POList
(
@CompanyID nvarchar(10),
@PO varchar (20) = '%',
@Order varchar(20)
)
As

SELECT
SS_Sendback.EndUserPO,
SS_Sendback.PO,
COUNT(SS_Sendback.EndUserPO) as pocount,
SUM(SS_Sendback.Customerprice) as totcost

FROM
SS_Sendback

WHERE
SS_Sendback.EndusercustomerNumber = @CompanyID
AND
SS_Sendback.EnduserPO Like @PO

GROUP BY
SS_Sendback.EndUserPO,
SS_Sendback.PO

ORDER BY
@Order
GO

and I receive the following error..
error1008: the select item identified by the Order By number 1 contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.
How does it know @order is a position and not a column name... It's a variable. I'm obviously doing something wrong. Can someone help.
Thanks

View 5 Replies View Related

Stored Procedure -order By Question

Jul 7, 2004

Hi
I´m newbie using SP, so excuse me if my doubt is stupid!!!

I´m trying to do a SP with like this

create procedure Test
@arg char(10)
as

select * from table

order by @arg

go

when i try to create this i got this error:

The SELECT item identified by the ORDER BY number %d contains a variable as part of the expression identifying a column position. Variables are only allowed when ordering by an expression referencing a column name.

This is possible to do?What i want is the query sorted by the variable i´ve passed(in this case arg).

If someone know how to do this, please tel me.

Thanks.

View 1 Replies View Related

Conditional Order By Stored Procedure

Nov 4, 2005

I need to create a conditional if or case statement in SQL Server 2000
for a stored procedure. Basically if the value passed in is 1,2 or 3 then
it will order by either NEWID(), a text field or a datetime feild.

Not done much dynamic sql so any help would be appreciated.

Fuzzy

View 8 Replies View Related

Order BY Problem In Stored Procedure

Jun 9, 2004

i am creating a Stored Procedure and trying to set the value for the sort column value as a variable which is passed from my c# program. But i get an error..is there a way, where i can specify a dynamic value for the sort column in the order by clause . My Procedure is as follows :-

ALTER PROCEDURE PhoneBook_search @startdate varchar(30), @enddate varchar(30), @sortType varchar(15),

AS
DECLARE @starttime AS varchar(30)
DECLARE @endtime AS varchar(30)
SET @starttime = @startdate + " 00:00"
SET @endtime = @enddate + " 23:59"

SELECT *
FROM phonebook
WHERE (exp_date BETWEEN @starttime AND @endtime order by
@sortType )




Any help is appreciated !!!

View 2 Replies View Related

Order Of Recursion In Stored Procedure

Jul 20, 2005

I've encountered some strange behavior in a recursive procedure I'mwriting for a bill of materials. First let me ask directly if what Ithink is happening is even possible:It seems like the procedure is not following the recursion in serialorder, but in parallel. In other words, after one instance of theprocedure calls itself, it continues executing lines below therecursion before the recursion is done. Is that possible? I lookedfor SQL Server Options that might deal with recursion or threading butI couldn't find anything.Now let me explain what's happening in terms of the BoM. All the rowsI expect are returned, but not in the correct order. Let's assume thefollowing tree:1|-2| |-5| | |-7| | -8| -6| -9|-3| |-10| |-11| | |-13| | -14| | |-15| | |-16| | -17| -12| -18| -19| -20| |-21| -22-4-23|-24-25-26This is stored in table P using MemberID and ParentID fields. Forexample,MemberID ParentID-------- --------1 NULL2 13 14 15 26 2(etc...)Based on how I wrote the recursion (I will provide the procedurebelow), I would expect output when starting from MemberID of 1 to looklike this:MemberID Depth Sort-------- ----- ----2 1 15 2 27 3 38 3 46 2 59 3 6(etc... basically, the line order of the graphical tree above, or acounter-clockwise traverse around the tree)Instead, I get this (I'll provide the whole thing because I don't seea pattern):MemberID Depth Sort-------- ----- ----2 1 15 2 23 1 210 2 37 3 34 1 36 2 39 3 423 2 48 3 411 2 413 3 512 2 524 3 525 3 618 3 614 3 615 4 719 4 726 4 720 5 816 4 817 4 921 6 922 6 10Call me crazy, but it looks like my tree was parsed in the same orderthat a set of dominos arranged in the same shape would topple. Theonly way I could see that happening is if the recursion is non-linear,allowing both children and siblings to be parsed simultaneously. Itwould also explain why my sort counter didn't increment properly, butthe depth counter is always correct.Now here are the procedures. There's also a Qty column, since this isa BoM after all, but I didn't need to mention it for my illustrationof the problem above.CREATE PROC makebom @root bigint---- This would be called by the client to find all the parts andquantities-- under a specific part (@root)--ASSET NOCOUNT ONCREATE TABLE #result (MemberID bigint, Qty bigint, Depth bigint, sortbigint)EXEC bomrecurse @root, 1, 0SET NOCOUNT OFFSELECT MemberID, Qty, Depth, sort FROM #result ORDER BY sortGOCREATE PROC bomrecurse @root bigint, @depthcounter bigint,@sortcounter bigint---- This is the recursive procedure, called once by makebom, butrecalling-- itself until the whole tree is parsed, filling the #result table--ASDECLARE @memberid bigint, @qty bigint, @nextdepth bigintDECLARE children_cursor CURSOR LOCAL FORSELECT MemberID, Qty FROM PWHERE ParentID = @rootORDER BY MemberIDOPEN children_cursorFETCH NEXT FROM children_cursorINTO @memberid, @qtyWHILE @@FETCH_STATUS = 0BEGINSET @sortcounter = @sortcounter + 1INSERT INTO #result VALUES (@memberid, @qty, @depthcounter,@sortcounter)SET @nextdepth = @depthcounter + 1EXEC bomrecurse @memberid, @nextdepth, @sortcounterFETCH NEXT FROM children_cursorINTO @memberid, @qtyENDCLOSE children_cursorDEALLOCATE children_cursorGOI'm surprised this even worked as well as it did because I'm a newbiewhen it comes to stored procedures and I put this together fromexamples I found around this group, online and in the T-SQL Help. Sofeel free to comment on other aspects of my code or approach, but I'mmost interested in understanding the behavior of this recursion.

View 4 Replies View Related

Order By Clause With Variables In A Stored Procedure

Mar 24, 2004

Hi,
I need to include two input variables
in my Order By Clause in a stored procedure like ORDER BY @column @Dirction. But MS SQL does not allow me
to do so and gives an Error 1008.
How can i solve this problem?

Thanks for your help!!

View 6 Replies View Related

Inconsistent Order By Using Insert Into In A Stored Procedure

Jul 20, 2005

hi there,i am using sql server 7. below is the stored procedure that is givingme grief. its purpose it two-fold, depending on how it is called:either to return a pageset (based on page number and page size), or toreturn IDs of previous and next records (based on current record id).the problem is, that the order in which records are inserted into thetemp table is inconsistent, even though the calling statement and theorder by is always the same: sometimes records are ordered correctly,by project_number, and sometimes the order is broken starting at somerecord (which is always the same).i have no idea what is wrong here, i would appreciate any help!thanks so much.here is the calling statement:EXECUTE spProjects 2,null,'project_number','asc','',6,50here is the proc:CREATE PROCEDURE spProjects@action int,@currID int,@sortBy varchar(50),@sortDir varchar(4),@searchBy varchar(255),@Page int,@RecsPerPage intASSET NOCOUNT ONDECLARE @nextID intDECLARE @prevID intDECLARE @currRow intDECLARE @rowCount intDECLARE @firstRec intDECLARE @lastRec intDECLARE @total intDECLARE @more intDECLARE @sortBy2 varchar(50)-- setup temp tableSELECT r.id as row, r.*,a.name agr_type,pu.name purpose,sp.name sponsor,pr.name prime,p.lname p_lname, p.fname p_fname, p.mname p_mi, p.emailp_email,o.name org,convert(varchar(10), r.created_date, 101) adddate_c,convert(varchar(10), r.updated_date, 101) upddate_cINTO #project_temp_tableFROM spm_projects r, spm_agreement_types a, spm_purpose_typespu, spm_sponsors sp, spm_sponsors pr, spm_pis p, spm_orgs oWHERE 1 = 0IF @sortBy IS NULL SELECT @sortBy = 'project_number'IF @sortBy = '' SELECT @sortBy = 'project_number'SELECT @sortBy2 = @sortBy + ' ' + @sortDirIF @sortBy NOT LIKE '%project_number%' SELECT @sortBy2 = @sortBy2 +', project_number'-- get projectsEXEC ('INSERT INTO #project_temp_tableSELECT r.id as row, r.*,a.name agr_type,pu.name purpose,sp.name sponsor,pr.name prime,p.lname p_lname, p.fname p_fname, p.mname p_mi, p.emailp_email,o.name org,convert(varchar(10), r.created_date, 101) adddate_c,convert(varchar(10), r.updated_date, 101) upddate_cFROM spm_projects r, spm_agreement_types a, spm_purpose_typespu, spm_sponsors sp, spm_sponsors pr, spm_pis p, spm_orgs oWHERE r.agreement_type_id = a.idAND r.purpose_type_id = pu.idAND r.sponsor_id = sp.idAND r.prime_id *= pr.idAND r.pi_id = p.idAND r.org_id = o.id' + @searchBy + 'ORDER BY ' + @sortBy2)SET @rowCount = 0-- number recordsUPDATE #project_temp_table SET @rowCount = row = @rowCount + 1-- prev/nextSELECT @currRow = row FROM #project_temp_table WHERE id = @currIDSELECT @prevID = id FROM #project_temp_table WHERE row = @currRow -1SELECT @nextID = id FROM #project_temp_table WHERE row = @currRow +1-- pagingSELECT @firstRec = (@Page - 1) * @RecsPerPageSELECT @lastRec = (@Page * @RecsPerPage + 1)SELECT @more = COUNT(*) FROM #project_temp_table WHERE row >=@LastRecSELECT @total = COUNT(*) FROM #project_temp_tableSET NOCOUNT OFF-- prev/nextIF @action = 1 SELECT @prevID as prevID, @nextID as nextID--pagingIF @action = 2SELECT *, @more as more, @total as totalFROM #project_temp_tableWHERE row > @firstRec AND row < @lastRecDROP TABLE #project_temp_table

View 7 Replies View Related

Dynamic Where In Stored Procedure Help

Sep 7, 2004

Hi all,

I have a web application that has a search engine that returns records based off what the user selects in the search engine. I am currently using coalesce in the where statement in my stored procedure to return the records. For eample,
where field1= coalesce(@parm1,field1). I don't know if this example is better than building the sql statement dynamically in a parameter then executing the parameter with sp_executesql. Can someone explain to me which is better or if there is a better solution?

Thanks,

James

View 5 Replies View Related

Stored Procedure With Dynamic Sql

Aug 6, 2004

CREATE PROCEDURE ggg_test_sp
@start_date datetime,@end_Date datetime
AS

SET NOCOUNT ON
DECLARE @sqlstmt varchar(1000)

SELECT @sqlstmt='SELECT * FROM ggg_emp WHERE date_join BETWEEN ' +CONVERT(varchar(10),@start_date-1,101) + ' AND ' +CONVERT(varchar(10),@end_Date+1,101)

SELECT @sqlstmt
EXEC (@sqlstmt)

GO


I want to apply date filter in the above sp with dynamic sql stmt. When i execute the above procedure with date ranges( @start_date=07/06/2004 AND @end_Date= 08/06/2004)i am not getting any result because my @sqlstmt variable has the select stamet

SELECT * FROM ggg_emp WHERE date_join BETWEEN 07/06/2004 AND 08/06/2004

BUT it should have the sqlstmt as

SELECT * FROM ggg_emp WHERE date_join BETWEEN '07/06/2004' AND '08/06/2004' to produce the required result

I know that for the above SP we dont need any dynamic sql but this is just an example.

So anyone can help me on this issue.

Thanks.

View 1 Replies View Related

Dynamic WHERE In Stored Procedure

Sep 29, 2007

Can anyone help me with this dumb question?
I want to use a stored procedure to bring back a recordset depending if a bit column is set to 1. My table has a number of columns that are of Data Type bit and I want to be able to specify which particular column I'm interested in as a parameter when I call the Stored Procedure.

I have set up the Stored Procedure as follows:


CREATE PROCEDURE getProducts
@param1 varchar(50)
AS
SELECT ProductID, ProductName
FROM dbo.Products
WHERE @param1 = '1'
GO


I'm calling it like this:


Dim cmdX, cmdParam, rsX
cmdParam = "OnSpecial"

set cmdX = Server.CreateObject("ADODB.Command")
cmdX.ActiveConnection = conn_STRING
cmdX.CommandText = "dbo.getProducts"
cmdX.Parameters.Append cmdX.CreateParameter("@RETURN_VALUE", 3, 4)
cmdX.Parameters.Append cmdX.CreateParameter("@param1", 200, 1,50,cmdParam)
cmdX.CommandType = 4
cmdX.CommandTimeout = 0
cmdX.Prepared = true
set rsX = cmdX.Execute
rsX_numRows = 0


I know for a fact that I have products in my dbase with the bit column 'OnSpecial' set to 1, yet no records are coming back.

Any pointers would be most appreciated.

View 3 Replies View Related

Help With Dynamic SQL Stored Procedure

Jul 23, 2005

I have a stored procedure spGetAccessLogDynamic and when I try to callit I get the following error:Server: Msg 2812, Level 16, State 62, Line 1Could not find stored procedure 'S'.I dont know why because I dont have anything refering to storedprocedure 'S'I have ran my SQL String with sample values and it works fine. So Iam presuming that it is some kind of syntax error in my storedprocedure but have tried everything and cant find it!Anyway here is the sample data I am using to call it and my spExec spGetAccessLogDynamic '24', '2005/07/04 00:00:00 AM', '2005/11/0400:00:00 AM', 'TimeAccessed DESC'CREATE PROCEDURE spGetAccessLogDynamic(@PinServiceID varchar (4),@StartDate varchar(40),@EndDate varchar(40),@SortExp varchar (100))AS-- Create a variable @SQL StatementDECLARE @SQLStatement varchar-- Enter the Dynamic SQL statement into the variable @SQLStatementSELECT @SQLStatement = ( 'SELECT A.PinValue,A.TimeAccessed,C.Forename, C.SurnameFROM AccessLog A, Members C, Pins PWHERE P.PinValue = A.PinValue ANDP.MemberID = C.MemberID AND A.PinServiceID= ''' + @PinServiceID + '''AND A.TimeAccessed BETWEEN dbo.func_DateMidnightPrevious( ''' +@StartDate + ''' ) AND dbo.func_DateMidnightNext( ''' + @EndDate+''')GROUP BY A.PinValue,A.TimeAccessed, C.Forename, C.SurnameORDER BY ' + @SortExp)-- Execute the SQL statementEXEC ( @SQLStatement)GOAny help would be very very much appreciated!!!!!!ThanksCaro

View 2 Replies View Related

Dynamic SQL Stored Procedure

Dec 4, 2007



We are continuing to have issues with a certain stored procedure using dynamic sql. The issue arose when we tried to clean the stored procedure up, and seemed to have zero problems in staging. As soon as we moved it into production, the stored proc caused excessive blocking and completely slowed down our production environment. We immediately rolled back the older version and production is back to normal.

After looking at the new procedure I don't understand how it could cause blocking. Any help is much appreciated!

Old Proc without issues----
--------
USE [Realist_Prod_1203]
GO
/****** Object: StoredProcedure [dbo].[USP_GetMatchedMLSRecord] Script Date: 12/04/2007 09:33:37 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
/*
=====================
Created By: Sunil/Sudeep 19-11-2003
Description:
Does a lookup of MLS Property data for reverse link. This is susceptible to error in that if erroneous data is given
to us,it will not find a match. For this reason, commented out the lookup on Suffix and changed the street
to use a like clause. Many users are putting the suffix in the street clause and no hits are generated.
This hurts performance, but it improves the hit ratio.

Usage: exec USP_GetMatchedMLSRecord 61,'3951','','KENSINGWOOD','DR','3951','columbus','OH','43230','39049','600-260368','600-260368-00','6000260368','urlll'

Mods:
01/08/2004 - Balawant - Added nullif(), as it was comparing apn numbers with '' (empty space)
02/23/2004 - Balawant - Added or (or State = '') condition for state, zip, city, StreetDirection and Suffix.
11/18/2004 - Sunil Padmanbhan - Added begin-end and modified altapn and parcelid in nullif statment.
04/03/2007 - Shiny - changed to Parameterized query generation
04/03/2007 - Vasan - Removed redundant nullif's and added a limit of 100 records on output
04/03/2007 - Shiny - Removed more Nullif's and changed datatypes for Zip and CountyID to Char to match with table datatypes
04/05/2007 - Vasan - Modified to match resultsets with original procedure
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
CREATE PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE @CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
DECLARE @sqltext nvarchar(4000)
SET @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
-- Because of skew and relative few group IDs, you may want to use an inline literal for this one parameter
-- to avoid plan sharing across different GroupIDs. Use explicit parameterization for the other parameters.
if @GroupID is null set @sqltext = @sqltext + '1=1' --ignore Group_ID if null
else SET @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' ' ;
--House number is mandatory: IF @HouseNumber IS NOT NULL AND @HouseNumber <> ''
SET @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '
IF @StreetDirection IS NOT NULL AND @StreetDirection <> '' SET @sqltext = @sqltext + ' AND (StreetDirection=@StreetDirection or @StreetDirection='''') '
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @sqltext = @sqltext + ' AND StreetName like @StreetName '
IF @Suffix IS NOT NULL AND @Suffix <> '' SET @sqltext = @sqltext + ' AND (Suffix=@Suffix or Suffix='''') '
--Unit is mandatory: IF @Unit IS NOT NULL AND @Unit <> ''
SET @sqltext = @sqltext + ' AND Unit=@Unit '
IF @City IS NOT NULL AND @City <> '' SET @sqltext = @sqltext + ' AND (City=@City or City='''') '
IF @State IS NOT NULL AND @State <> '' SET @sqltext = @sqltext + ' AND (State=@State or State='''') '
IF @ZIP IS NOT NULL AND @ZIP <> '' SET @sqltext = @sqltext + ' AND (ZIP=@ZIP or ZIP='''') '
--CountyId is mandatory: IF @CountyID IS NOT NULL AND @CountyID <> ''
SET @sqltext = @sqltext + ' AND CountyID=@CountyID '
-- Execute as an explicitly parameterized query. This will provide plan reuse for any executions of the proc
-- that have the same @GroupID and the same combination of non-empty parameters.
/*print @sqltext
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print ' @CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber*/

EXEC sp_executesql
@sqltext,
N'@ReverseLinkURL varchar(200), @HouseNumber varchar(50), @StreetDirection varchar(50), @StreetName varchar(50),
@Suffix varchar(50), @Unit varchar(50), @City varchar(50), @State varchar(50), @ZIP varchar(50), @CountyID varchar(50)',
@ReverseLinkURL=@ReverseLinkURL, @HouseNumber=@HouseNumber, @StreetDirection=@StreetDirection, @StreetName=@StreetName,
@Suffix=@Suffix, @Unit=@Unit, @City=@City, @State=@State, @ZIP=@ZIP, @CountyID=@CountyID
END
END

New Proc WITH Blocking issues----
--------
/*
=====================
Created By: David Barrs 8-13-2002
Description: Returns the properties for given group id

Usage:
EXEC USP_GetMatchedMLSRecord 1,'8108','','dunn','','','austin','TX','','48453','','','','http://sef.mlxchange.com/reverselink.asp?action=reverselink'
Mods:
xx/xx/xxxx - who - Description
11/28/2007 - Shiny - Refactored the procedure
\\\\\\
=====================
if exists (select 1 from sysobjects where name = 'USP_GetMatchedMLSRecord')
drop procedure USP_GetMatchedMLSRecord
grant exec on USP_GetMatchedMLSRecord to webuser
*/
ALTER PROCEDURE [dbo].[USP_GetMatchedMLSRecord]
(
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)
)
AS
DECLARE
@sqltext nvarchar(4000),
@paramlist nvarchar(4000),
@CountyID char(6)
Select @CountyID=CountyID from ltCounties where FIPS=@FIPS
IF (@ApnNumber IS NOT NULL AND @ApnNumber <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@ApnNumber AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber=@ApnNumber AND GroupID = @GroupID ;
ELSE
BEGIN
IF (@AltApn IS NOT NULL AND @AltApn <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WITH (NOLOCK) WHERE APNnumber=@AltApn AND GroupID=@GroupID))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @AltApn AND GroupID=@GroupID;
ELSE
IF (@ParcelId IS NOT NULL AND @ParcelId <> '') AND (EXISTS (SELECT 1 FROM tblMLSListing WHERE APNnumber=@ParcelId AND GroupID=@GroupID ))
SELECT @ReverseLinkURL as 'ReverseLinkBaseURL', MLSNumber,Comment FROM tblMLSListing WITH (NOLOCK)
WHERE APNnumber= @ParcelId AND GroupID=@GroupID;
ELSE
BEGIN
-- Finalize parameter values
IF @ReverseLinkURL IS NULL SET @ReverseLinkURL = '';
IF @StreetName IS NOT NULL AND @StreetName <> '' SET @StreetName = @StreetName + '%';
-- Build up SQL text dynamically, only including filter predicates for those parameters that the user wants
-- to search on.
SELECT @sqltext = 'Select top 100 '''' + @ReverseLinkURL as ''ReverseLinkBaseURL'',MLSNumber,Comment
from tblMLSListing WITH (NOLOCK)
where '
IF @GroupID IS NOT NULL
SELECT @sqltext = @sqltext + 'GroupID=' + CONVERT (varchar(30), @GroupID) + ' '

SELECT @sqltext = @sqltext + ' AND HouseNumber=@HouseNumber '

IF @StreetDirection IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetDirection = @StreetDirection '

IF @StreetName IS NOT NULL
SELECT @sqltext = @sqltext + ' AND StreetName LIKE @StreetName + ''%'''

IF @Suffix IS NOT NULL
SELECT @sqltext = @sqltext + ' AND Suffix = @Suffix'

SELECT @sqltext = @sqltext + ' AND Unit=@Unit '

IF @City IS NOT NULL
SELECT @sqltext = @sqltext + ' AND City = @City'

IF @State IS NOT NULL
SELECT @sqltext = @sqltext + ' AND State = @State'

IF @ZIP IS NOT NULL
SELECT @sqltext = @sqltext + ' AND ZIP = @ZIP'
SELECT @sqltext = @sqltext + ' AND CountyID='+ CONVERT (varchar(30), @CountyID)+' '
SELECT @paramlist = '
@GroupID int,
@HouseNumber varchar(50),
@StreetDirection varchar(50),
@StreetName varchar(50),
@Suffix varchar(50),
@Unit varchar(50),
@City varchar(50),
@State varchar(50),
@ZIP char(50),
@FIPS varchar(10),
@ApnNumber varchar(50),
@AltApn varchar(50),
@ParcelId varchar(50),
@ReverseLinkURL varchar(200)'

/*
print '@ReverseLinkURL = ' + @ReverseLinkURL
print '@HouseNumber = ' + @HouseNumber
print '@StreetDirection = ' + @StreetDirection
print '@StreetName = ' + @StreetName
print '@Suffix = ' + @Suffix
print '@Unit = ' + @Unit
print '@City = ' + @City
print '@State = ' + @State
print '@ZIP = ' + @ZIP
print '@CountyID = ' + @CountyID
print 'debug: ApnNumber = ' + @ApnNumber
*/
EXEC sp_executesql @sqltext, @paramlist, @GroupID, @HouseNumber, @StreetDirection, @StreetName,
@Suffix, @Unit, @City, @State, @ZIP, @FIPS, @ApnNumber, @AltApn, @ParcelId, @ReverseLinkURL
END
END;


Thank You,

-D

View 1 Replies View Related

Stored Procedure To Update A Display Order Field.

Dec 20, 2006

I am creating an app that allows the user to change the order of the list by changing a value in a displayOrder field. I'd love a button for move up /move down move bottom/move top and then pass that parameter to a stored procedure and it would renumber all the items in the list.
Example
ItemID  description   DisplayOrder  Action0           item 1           0                     Moveup/move down1           item 2           1                     Moveup/move down2           item 3           2                     Moveup/move down
So clicking on move up on item 2 would pass and itemID, Action and perhaps a list id to a stored proc and it would renumber the list. I'm assuming it would be done with a loop but I've never tried that.. suggestions?
Thanks - Mark

View 1 Replies View Related

Passing Table Name And Order By Parameter To Stored Procedure

Jul 27, 2007

can i pass the name of the table and the "order by" column name to stored procedure?
 i tried the simple way
(@tablename varchar and then "select * from @tablename)
but i get error massesges. the same for order by...
what is the right syntex for this task?

View 2 Replies View Related

Permissions With Dynamic SQL Within Stored Procedure

Aug 1, 2006

Okay, I have sort of a peculiar permissions question I am wondering if someone can help me with. Basically, here's the scenario...
I have a CLR stored procedure which does some dynamic SQL building based on values sent in via XML. It's a CLR stored procedure using XML because I want to build a parameterized statement (to guard against SQL Injection) based on a flexible number of parameters which are basically passed in the XML.
The dynamic SQL ends up reading from a table I'll call TableX and I actually discovered an (understandable) quirk with security.
Basically, the connection context is using security for a low-privilaged Windows account ("UserX") and UserX has no permission to the table referenced in the dynamic SQL but because of the dyanmic nature of the query, the stored procedure ends up adopting the security context of UserX. Naturally, this throws a security exception saying UserX has no SELECT permission on TableX.
Now, I can give UserX read permission to the table in question to get things running, but one of the points of using stored procedures is to defer security to the procedure level vs. configuration for tables or columns.
So in striving toward my ideal of security at the procedure level, my question is what is the best way to allow minimum privilege in this case?
I thought about having the internals of the CLR stored procedure run under a different (low-privalaged) security context, but I am wondering if there's an alternate configuration that may be as secure, but simpler.
PS - Please don't let this degenerate into a conversation about OR mappers. I know that happens a lot on these forums.
 

View 3 Replies View Related

Run Dynamic Query Using Stored Procedure

Aug 16, 2007

Hi,
I need to create a stored procedure, which needs to accept the column name and table name as input parameter,
and form the select query at the run time with the given column name and table name..
my procedure is,
CREATE PROC spTest
@myColumn varchar(100) ,
@myTable varchar(100)
 AS
SELECT @myColumn FROM @myTable
GO
This one showing me the error,
stating that myTable is not declared..
.............as i need to perform this type of query for more than 10 tables.. i need the stored procedure to accept the column and table as parameters..
Plese help me?? Is it possible in stored procedure..
 
 
 
 

View 3 Replies View Related

Variables In Dynamic SQL In A Stored Procedure

Aug 23, 2007

I am taking my first steps into stored procedures and I am working on a solution for efficiently paging large resultsets with SQL Server 2000 based on the example on 4Guys: http://www.4guysfromrolla.com/webtech/042606-1.shtml
The problem with my stored procedure is, is that it doesn't seem to recognize a variable (@First_Id) in my dynamic Sql. With this particular sproc I get the error message: "Must declare the scalar variable '@First_Id'"It seems to be a problem with 'scope', though I still can't yet figure out. Can anyone give me some hints on how to correctly implement the @First_Id in my stored procedure? Thanks in advance!
Here's the sproc:
ALTER PROCEDURE dbo.spSearchNieuws(@SearchQuery NVARCHAR(100) = NULL,@CategorieId INT = NULL,@StartRowIndex INT,        @MaximumRows INT,@Debug BIT = 0)ASSET NOCOUNT ONDECLARE @Sql_sri   NVARCHAR(4000),@Sql_mr    NVARCHAR(4000),@Paramlist NVARCHAR(4000),@First_Id  INT, @StartRow  INTSET ROWCOUNT @StartRowIndexSELECT @Sql_sri = 'SELECT @First_Id = dbo.tblNieuws.NieuwsId FROM dbo.tblNieuwsWHERE 1 = 1'IF @SearchQuery IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)'              IF @CategorieId IS NOT NULLSELECT @Sql_sri = @Sql_sri + ' AND dbo.tblNieuws.CategorieId = @xCategorieId'SELECT @Sql_sri = @Sql_sri + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'SET ROWCOUNT @MaximumRows SELECT @Sql_mr = 'SELECT dbo.tblNieuws.NieuwsId, dbo.tblNieuws.NieuwsKop, dbo.tblNieuws.NieuwsLink, dbo.tblNieuws.NieuwsOmschrijving, dbo.tblNieuws.NieuwsDatum,                 dbo.tblNieuws.NieuwsTijd, dbo.tblNieuws.BronId, dbo.tblNieuws.CategorieId, dbo.tblBronnen.BronNaam, dbo.tblBronnen.BronLink, dbo.tblBronnen.BiBu, dbo.tblBronnen.Video,                dbo.tblCategorieen.CategorieFROM       dbo.tblNieuws INNER JOIN                dbo.tblBronnen ON dbo.tblNieuws.BronId = dbo.tblBronnen.BronId INNER JOIN                dbo.tblCategorieen ON dbo.tblNieuws.CategorieId = dbo.tblCategorieen.CategorieId AND                 dbo.tblBronnen.CategorieId = dbo.tblCategorieen.CategorieId         WHERE dbo.tblNieuws.NieuwsId <= @First_Id          AND 1 = 1'               IF @SearchQuery IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND FREETEXT(dbo.tblNieuws.Nieuwskop, @xSearchQuery)'           IF @CategorieId IS NOT NULLSELECT @Sql_mr = @Sql_mr + ' AND dbo.tblNieuws.CategorieId = @xCategorieId'     SELECT @Sql_mr = @Sql_mr + ' ORDER BY dbo.tblNieuws.NieuwsId DESC'IF @Debug = 1PRINT @Sql_mr  SELECT @Paramlist = '@xSearchQuery NVARCHAR(100),     @xCategorieId INT'EXEC sp_executesql   @Sql_sri, @Paramlist,     @SearchQuery, @CategorieIdEXEC sp_executesql   @Sql_mr, @Paramlist,     @SearchQuery, @CategorieId 

View 8 Replies View Related

Dynamic Query In Stored Procedure

Apr 22, 2008

Hi i am trying to make the "userName" section of the code below dynamic as well, how can i do this, the reason being userName will not always be passed through to it. 
 
ALTER PROCEDURE [dbo].[stream_UserFind]

@userName varchar(100),
@subCategoryID INT,
@regionID INT
)ASdeclare @StaticStr nvarchar(5000)set @StaticStr = 'SELECT DISTINCT SubCategories.subCategoryID, SubCategories.subCategoryName,Users.userName ,UserSubCategories.userIDFROM Users INNER JOIN UserSubCategories ON Users.userID= UserSubCategories.userIDINNER JOINSubCategories ON UserSubCategories.subCategoryID = SubCategories.subCategoryID WHERE UserName like ' + char(39) + '%' + @UserName + '%' + char(39)
if(@subCategoryID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.subCategoryID  = ' + cast( @subCategoryID as varchar(10))if(@regionID <> 0) set @StaticStr = @StaticStr + ' and SubCategories.RegionId  = ' + cast( @regionID as varchar(10))
print @StaticStr
exec(@StaticStr)
)

View 10 Replies View Related

Dynamic Sql For Count In Stored Procedure

Apr 29, 2008

Hi all,
I'm using sql 2005. Can some one please tell me how to write dynamic sql for count. What i want is that i want to count the number of employees existing for the given department names and get the counted values as output into my vb.net 2.0 project.  If any one know who to write this please send the code.. Please help me.. I want the below code to change to dynamic sql:
 Alter proc GetCountforemp
@DestName varchar(200)=null,
@total int output
as
begin
SELECT @total = Count(distinct Employee.EmployeeID) FROM Employee
INNER JOIN Dest R on R.DestID=Employee.DestID
WHERE R.DestName in ('''+@DestName+''')
end 

View 1 Replies View Related

Trying To Build Dynamic Stored Procedure

Jun 6, 2008

My existing ASP 1.0 site keeps getting hacked using SQL injections.  I have rewritten the site in ASP 3.5 to stop the attacks but cannot figure out how to dynamically generate a basic keyword search.
I am trying to take the keywords entered into an array and then construct the WHERE clause - not having much luck.  Getting either errors or double LIKE statements. Need some help.
string[] SqlKWSrch; 
SqlSrch = KWordSrch.Text;SqlKWSrch = SqlSrch.Split(' ', ',');     int AStop = SqlKWSrch.Length;     int i = 0;        foreach( string a in SqlKWSearch )       {           if (i <= AStop)           {               SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' AND ";           }           else           {               SqlWHR = SqlWHR + "L_Kwords LIKE '%' + " + " '" + SqlKWSrch[i] + "' " + " + '%' ";           }            i++;       }
1) I can't seem to properly terminate the final LIKE statement2) can't figure out how to pass 'SqlWHR' to the procedure
GIVEN KEYWORDS: 'antique chairs' entered I want to end up with the below SP, the @SqlWHR parameter appeared to have worked once but it probably was an illusion.
PROCEDURE KeyWordSearch@SqlWHR varchar(100)AS
SELECT L_Name, L_City, L_State, L_Display FROM tblCompanies WHERE L_Kwords LIKE '%' + 'antique' + '%' AND L_Kwords LIKE '%' + 'chairs' + '%' AND L_Display = 1
RETURN
 
Thank you
 

View 5 Replies View Related

Dynamic Query In Stored Procedure

Jun 13, 2008

Hi, I have a table with values such as test1, test2, test3, test4, test5.
I need to write a stored procedure with paramater (number TINYINT, number2 TINYINT), the number represents the field that I'm going to select and compare. For example if I pass in (1,5) I will need the fields test1 and test5 and store them in Temp and Temp2. How do I write the following to so it will dynamically select which field to use when passing the parameters?
DECLARE @Temp TINYINT,
DECLARE @Temp2 TINYINT, 
SELECT top 1 Temp = test1, Temp2 = test5 from table

View 4 Replies View Related

Dynamic WHERE Clause To Stored Procedure

May 25, 2004

Hi all!
I need to create a stored procedure with a parameter and then send a WHERE clause to that parameter (fields in the clause may vary from time to time thats why I want to make it as dynamic as possible) and use it in the query like (or something like) this:

---------------------------------------------------
@crit varchar(100)

SELECT fldID, fldName FROM tblUsers
WHERE @crit
----------------------------------------------------

Of course this does not work, but I don't know how it should be done, could someone please point me in the right direction on how to do this kind of queries.

cheers!
pelle

View 2 Replies View Related

Dynamic Where Clause In Stored Procedure

Jul 23, 2004

Hi, I have several parameters that I need to pass to stored procedure but sometimes some of them might be null. For example I might pass @Path, @Status, @Role etc. depending on the user. Now I wonder if I should use dynamic Where clause or should I use some kind of switch, maybe case and hardcode my where clause. I first created several stored procedures like Documents_GetByRole, Documents_GetByRoleByStatus ... and now I want to combine them into one SP. Which approach is better. Thanks for your help.

View 1 Replies View Related

Dynamic Stored Procedure Errors

Aug 17, 2004

Hi

I am getting the following error

Syntax error converting the varchar value 'Select * from Residential WHERE Price BETWEEN ' to a column of data type int.

when running the following SP.



CREATE PROCEDURE testing
(
@Locationnvarchar(100)=NULL,
@TypeHomenvarchar(50)=NULL,
@MinPriceint=0,
@MaxPriceint=9999999999,
@Bedroomsnvarchar(2)=NULL,
@BathsSearchnvarchar(2)=NULL
)
AS

Declare @strSql char(255)
Set @strSql="Select * from Residential WHERE "

Set @strSql=@strSql + "Price BETWEEN " + @MinPrice + " AND " + @MaxPrice
If @Location is NOT NULL
Set @strSql=@strSql + ' AND city = ' + @Location

If @TypeHome is NOT NULL
Set @strSql=@strSql + ' AND Type = ' + @TypeHome

Set @strSql=@strSql + ' AND BDRM >= ' + @Bedrooms
Set @strSql=@strSql + ' AND BATHS <= ' + @BathsSearch
Set @strSql=@strSql + ' AND IDX = Y'

Exec(@strSql)



What is causing this error?

Thanks in advance

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved