Empty The Transaction Log

Jun 28, 2004

Hi i would like to know how to empty the transaction log programmaticly.





Someone got a clue? :)

View 6 Replies


ADVERTISEMENT

Transaction Log Never Empty

Jan 26, 2000

Hi, I have a SQL Server 6.50 - 6.50.415 (Intel X86) and one database has 8Gb of data and 2Gb of log, the problem is that
the log space used is never below 44%, even if I back it up this way:

DUMP TRANSACTION DBName TO DBNAME_log_930 VOLUME = 'SS0003' WITH NOUNLOAD , STATS = 10, INIT , NOSKIP

This should clean the log, right?

I check for open transactions via: dbcc opentran (GMS), but there aren't.
The way I check for the log space used is: dbcc sqlperf(logspace)
The recover interval is 5.

Any Ideas?

Thank You
Gaspar Gonzalez

View 2 Replies View Related

How Do I Empty The Transaction Log

Nov 22, 2005

good day to everybody

View 5 Replies View Related

How Do You Clear/ Empty The Transaction Log

Dec 5, 2007

We want to back up our test db (new application) and then put it back on the box. The transaction log is pretty full (600mb), can I clear this file or delete the data in it -- we do not need it since this is all testing data.

Thanks,
anke

View 1 Replies View Related

Error 8525: Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

May 31, 2008

Hi All

I'm getting this when executing the code below. Going from W2K/SQL2k SP4 to XP/SQL2k SP4 over a dial-up link.

If I take away the begin tran and commit it works, but of course, if one statement fails I want a rollback. I'm executing this from a Delphi app, but I get the same from Qry Analyser.

I've tried both with and without the Set XACT . . ., and also tried with Set Implicit_Transactions off.

set XACT_ABORT ON
Begin distributed Tran
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TRANSACTIONMAIN
set REPFLAG = 0 where REPFLAG = 1 and DONE = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.WBENTRY
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.FIXED
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.ALTCHARGE
set REPFLAG = 0 where REPFLAG = 1
update OPENDATASOURCE('SQLOLEDB','Data Source=10.10.10.171;User ID=*****;Password=****').TRANSFERSTN.TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
update TSADMIN.TSAUDIT
set REPFLAG = 0 where REPFLAG = 1
COMMIT TRAN


It's got me stumped, so any ideas gratefully received.Thx

View 1 Replies View Related

SSIS, Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 22, 2007

I have a design a SSIS Package for ETL Process. In my package i have to read the data from the tables and then insert into the another table of same structure.

for reading the data i have write the Dynamic TSQL based on some condition and based on that it is using 25 different function to populate the data into different 25 column. Tsql returning correct data and is working fine in Enterprise manager. But in my SSIS package it show me time out ERROR.

I have increase and decrease the time to catch the error but it is still there i have tried to set 0 for commandout Properties.

if i'm using the 0 for commandtime out then i'm getting the Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

and

Failed to open a fastload rowset for "[dbo].[P@@#$%$%%%]". Check that the object exists in the database.

Please help me it's very urgent.

View 3 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Feb 6, 2007

I am getting this error  :Distributed transaction completed. Either enlist this session in a new
transaction or the NULL transaction. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.OleDb.OleDbException: Distributed transaction completed. Either
enlist this session in a new transaction or the NULL transaction.have anybody idea?!

View 1 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction.

Dec 22, 2006

i have a sequence container in my my sequence container i have a script task for drop the existing tables. This seq. container connected to another seq. container. all these are in for each loop container when i run the package it's work fine for 1st looop but it gives me error for second execution.

Message is like this:

Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.

View 8 Replies View Related

Distributed Transaction Completed. Either Enlist This Session In A New Transaction Or The NULL Transaction. (HELP)

Jan 8, 2008

Hi,

i am getting this error "Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction.".

my transations have been done using LINKED SERVER. when i manually call the store procedure from Server 1 it works but when i call it through Service broker it dosen't work and gives me this error.



Thanks in advance.


View 2 Replies View Related

SQL Server Admin 2014 :: Restore Lost Transaction From Transaction Log File

Jun 10, 2015

I have Full database backup upto previous day and transaction logfile of Today transaction. my database has crashed. I have restored previous day's Full backup. I have faced difficulty to restore today's transaction from today's transaction log. What are the steps to restore full database back and one day's transaction log file. Note: there is no differential database backup and transaction backup.

View 8 Replies View Related

I Need Away To Show The Pending Transaction From Transaction Replication In A User Friendly Format.

Jul 11, 2007



I want to list out the pending transaction for transaction replication by publication.



Help needed.

View 1 Replies View Related

TRANSACTIONS In SSIS (error: The ROLLBACK TRANSACTION Request Has No Corresponding BEGIN TRANSACTION.

Nov 14, 2006

I'm receiving the below error when trying to implement Execute SQL Task.

"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'

I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.

Anyone know of the reason?

View 1 Replies View Related

Analysis :: Find Amount Distribution Across Different Transaction Types Under Spend Transaction

Jul 27, 2015

I created a Calculated measure in cube something like this : ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount]). To get only spend transactions. Now, I want to slice this measure with same hierarchy to find the amount distribution across different transaction types under spend transaction. But this query behaving like the measure doesn't have relation with measure.

you can think this as below query:
WITH
MEMBER SPEND AS ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent].&[SPEND],[Measures].[Transaction Amount])
SELECT NON EMPTY {SPEND} ON 0
,NON EMPTY ([TransType].[TransTypeHierarchy].[TransTypeCategoryParent]) ON 1
FROM [CUBE]

View 6 Replies View Related

How Do I Make Use Of Begin Transaction And Commit Transaction In SSIS.

Jun 1, 2007

Hi



How do I make use of begin transaction and commit transaction in SSIS.

As am not able to commit changes due to certain update commands I want to explicitly write begin and commit statements. but when i make use of begin and commit in OLEDB commnad stage it throws an error as follows:

Hresult:0x80004005

descriptionyntax error or access violation.



its definately not an syntax error as i executed it in sql server. also when i use it in execute sql task out side the dataflow container it doesnt throw any error but still this task doesnt serve my purpose of saving/ commiting update chanages in the database.



Thanks,

Prashant

View 3 Replies View Related

Sql2005:Cannot Use SAVE TRANSACTION Within A Distributed Transaction

Oct 10, 2005

Error returned when trying to commit the transaction to a database that is a replication distributor. (sql2005 ctp16)

View 10 Replies View Related

Problem With SSIS Transaction...Transaction Scope

Jun 1, 2006



Hi,

I am having some problem with SSIS transaction. Eventhought I tried to imitate the concept that Jamie presented at http://www.sqlservercentral.com/columnists/jthomson/transactionsinsqlserver2005integrationservices.asp

. My workflow is as followed

*********************************
For Each ADO.Record in Oracle (transaction=not supported)

If (Certain_Field_Value = 'A')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence A (Start a Transaction , transaction=required)


INSERT/UPDATE some records in SQLDB(transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'B')


Lookup Data in SQL DB with values from Oracle (transaction=not supported)

DO Sequence B (Start a Transaction , transaction = required)


INSERT/UPDATE some records in SQLDB (transaction=supported)
Finish Sequence A ( transaction should stop here)
UPDATE Oracle DB ( Execute SQLTask, transaction=not supported)
If (Certain_Field_Value = 'C')

------------
------------
End ForEach Loop
*************************************
My requirements are that I want separate transaction for each Sequence A, B, C, etc... If Sequence A transaction fails, the other should still be continuing with another transaction.
But I am getting an error regarding the OLEDB Error in next Task (e.g in Certain_Field_Value = 'B') "Lookup Data in SQL DB with values from Oracle ", the error message is ".......Distributed transaction completed. Either enlist this session in a new transaction or the NULL transaction. ".
What is it that I am doing wrong?
Regards
KyawAM

View 12 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

Nov 28, 2004

I'm getting this error:

The operation could not be performed because the OLE DB provider 'SQLOLEDB' was unable to begin a distributed transaction.
[OLE/DB provider returned message: New transaction cannot enlist in the specified transaction coordinator. ]
OLE DB error trace [OLE/DB Provider 'SQLOLEDB' ITransactionJoin::JoinTransaction returned 0x8004d00a].

http://support.microsoft.com/kb/839279 this didn't help

any suggestions?

View 3 Replies View Related

BEGIN TRANSACTION And COMMIT TRANSACTION

Oct 11, 2000

I am executing a stored procedure something like this

Create Procedure TEST
@test1
@test2
AS
BeGIN TRANSACTION ONE
SELECT...
UPDATE..
....
....

....
TRUNCATE
etc and lot of Select,update and delete statements like this
.....
COMMIT TRANSACTION ONE


The Block of code which I have b/w BEGIN TRANSACTION AND COMMIT TRANSACTION ..Will it be rolled back
if it encounters any errors in the SELECT,UPPDATE,DELETE ..statements which I have with the transaction one.
IF not How do I roll back if it encounters any erros b/w the BEGIN TRANSACTION and END TRANSACTION.

Thanks
micky

View 1 Replies View Related

New Transaction Cannot Enlist In Transaction Coordinator (was Please Help...)

Apr 18, 2005

Hi all,

In my ASP application, I've been using this code:

----------------------------------------------
dim conn, connectionstring

connectionstring= "Provider=SQLOLEDB.1; Data Source = blahblah; Initial Catalog = abc; User Id = osss; Password=xxx"

set conn = server.CreateObject("adodb.connection")
conn.open connectionstring

----------------------------------------------

It's just basically to set up the connection to the SQL server, it works on my other pages, but on a few pages, the last line (conn.open connectionstring) triggers this error:

"Microsoft OLE DB Provider for SQL Server error '8004d00a'

New transaction cannot enlist in the specified transaction coordinator. "

I've never encountered this error before and I couldn't think of any solution... please help!!!

Thanks so much,
Annie

View 2 Replies View Related

BEGIN TRANSACTION COMMIT TRANSACTION Help

Sep 24, 2007

I had thought that if any statement failed within a BEING TRANS .. COMMIT TRANS block, then all the statements would be rolled back. But I am seeing different behavior (SQL Server 2000 8.00.2039)

For instance, run these statements to set up a test:
--DROP TABLE testTable1
--DROP TABLE testTable2
CREATE TABLE testTable1 (f1 varchar(1))
CREATE TABLE testTable2 (f1 varchar(1))
CREATE UNIQUE INDEX idx_tmptmp ON testTable1 (f1)
insert into testTable1(f1) values ('a')

So table testTable1 has a unique index on it..

Now try to run these statements:

--DELETE FROM testTable2
BEGIN TRANSACTION
insert into testTable1(f1) values ('a')
insert into testTable2(f1) values ('a')
COMMIT TRANSACTION

SELECT * FROM testTable2


..the first insert fails on the unique index.. but the second insert succeeds. Shouldn't the second insert roll back? How can I make two operations atomic?

View 8 Replies View Related

Why Transaction Gets Promoted To Distributed Transaction

Feb 1, 2007

Hi,On My local SQL server I have added a linked server to another SQLserver (remoteserver) in another Windows NT Domain.When I run this codeselect count(*) from remoteserver.mosaics.dbo.LocationThis works fine.However when I usebegin transactionselect count(*) from remoteserver.mosaics.dbo.LocationIt errors out saying thatThe operation could not be performed because the OLE DB provider'SQLOLEDB' was unable to begin a distributed transaction.New transaction cannot enlist in the specified transactioncoordinator. ]OLE DB error trace [OLE/DB Provider 'SQLOLEDB'ITransactionJoin::JoinTransaction returned 0x8004d00a].My question is even though I am just reading data from theremoteserver, why does the local transaction get promoted to adistributed transaction.Any help will be grately appreciated.TIA...Rohit

View 2 Replies View Related

New Transaction Cannot Enlist In The Specified Transaction Coordinator

May 18, 2007

Hi



I am trying transfer data from Back Office Server to Head Office using DTS. It is failing in few stores, rest of the store it is OK

Configuration

Head office :Windows 2003 SP1 and Sql Server 2000 SP3

Failing Store:Windows 2003 SP2 and SQL SERVER 2005

Successful Store :Windows 2003 SP2 qnd SQL SERVER 2000





At Store: Setting for MSDTC

Log on Account for MSDTC Service : Network Service

Network DTC Access = True

Allow Inbound = True

Allow Outbound = True

No Authentication Required = True

TurnOffRPCSecurity = 1

port Ranges for RPC = 5000- 5100



The error Message is as follows:

(Microsoft Data Transformation Services (DTS) Package (8004d00a): Connection 'Head Office SQL Server' for Task 'DTSTask_DTSDataPumpTask_1' does not support joining distributed transactions or failed when attempting to join. Unable to enlist in the transaction.
) (Microsoft OLE DB Provider for SQL Server (8004d00a): New transaction cannot enlist in the specified transaction coordinator. )



If any one can help me, that will be great!!! Thanks in advance



Shiny

View 3 Replies View Related

ALL And Empty Set

Sep 29, 2006

SQL Server 2000 SP4. Hoping to find a logical explanation for a certainbehavior.Consider this script:USE pubsGOIF 1 = ALL (SELECT contract FROM dbo.authors WHERE state = 'CA')PRINT 'TRUE'ELSEPRINT 'FALSE'This, as expected, prints FALSE, since not all authors in CA are undercontract. Now, if the script is changed as follows:USE pubsGOIF 1 = ALL (SELECT contract FROM dbo.authors WHERE state = '')PRINT 'TRUE'ELSEPRINT 'FALSE'then the result is TRUE. In other words, the expression evaluates to TRUEwhen the select statement produces an empty set, which doesn't make senseto me. Even more interesting, the expressionNULL = ALL (SELECT contract FROM dbo.authors WHERE state = '')still evaluates to TRUE (ANSI_NULLS is ON).Can anyone explain these results? Is this the expected behavior in the SQLstandard, or something that is specific to SQL Server? Thanks.--remove a 9 to reply by email

View 5 Replies View Related

Can Anyone Tell Me Why This Returns An Empty Value?

Feb 26, 2007

@Names is a query string passed in, I need to count the number of records as a  result of the below query/ 
 
Dim test As String
Dim sqlConnection3 As New SqlConnection("data Source=EQ-520-WEBSQLEXPRESS;Initial Catalog=CRDB.MDF;Integrated Security=True")
Dim cmd As New SqlCommand
 
Dim returnValue As Object
cmd.CommandText = "SELECT COUNT(ReqID) AS Expr1, LineManager FROM TblReqMain GROUP BY LineManager HAVING (LineManager = @Names)"
cmd.CommandType = Data.CommandType.Text
cmd.Connection = sqlConnection3
cmd.Parameters.Add("@Names", Data.SqlDbType.NVarChar)
sqlConnection3.Open()
cmd.Parameters("@Names").Value = test
If test = "" Then
Response.Write("An error occured")
Exit Sub
Else
returnValue = cmd.ExecuteScalar()
sqlConnection3.Close()
Label6.Text = "Number " & returnValue

View 1 Replies View Related

Datatable Is Empty

Feb 12, 2008

I am fetching records from a table and putting in a datatable using the "sqlda.fill(datatable)"
when i see the datable in "data visualizer" i find no rows.
It is confused eventhough it does not throw any error
 

View 3 Replies View Related

Inserting An Empty Row

Mar 14, 2008

Hi, is there an equivalent to the mysql's " INSERT INTO table () VALUES ();"?    The fields don't allow null values, and there is a primary key with auto increment. Any ideas?Thanks a lot. 

View 7 Replies View Related

To Empty Log File

Jun 27, 2005

i have a sql sever2000 , and few disk.
when i am doing many opertaion , the log file is full. so how can i empty it?
sorry for my bad english

View 2 Replies View Related

Bcp Out Empty Column

Feb 27, 2006

I'm bcp-ing a table to a file. I've noticed that if a varchar column is empty, that both "bcp -c" and "bcp -c -k" export the empty value as #$00. Instead, I'd like to export the value as if it were null.


use monkey
go

create table tab1 (
myColumn varchar(10) null
)
go

insert into tab1 (myColumn) values ('')
go

exec master..xp_cmdshell 'bcp monkey..tab1 out D:data.csv -c -T'
go

drop table tab1
go


I've been fiddling about with other switches but so far haven't come up with a solution other than writing out the full SELECT-statement or updating the original. Anyone with an easier solution?

View 3 Replies View Related

Empty A Table

May 14, 2007

hi everyone,

i was just wondering, is there anyway to empty a table...like, in mysql u can go EMPTY TABLE

and it resets the identity stuff, so your id's start at zero again...?

Thanks, Justin

View 4 Replies View Related

Database Empty

Mar 23, 2006

hello everyone,
am not sure if this is the right forum, but here goes.

We have a couple of clients we support running MS SQL, and as a rule, all db access is by SP and select statements.

However, we noticed earlier today, that a newly created account was empty. All columns except the users columns had been deleted.

1. Is there a way of checking which user account deleted the columns ?
2. Or finding out what went wrong ?

This has never happened before

Afrika

View 3 Replies View Related

Empty Results?

Apr 19, 2007

Okay, so i have a procedure where i'm trying to build a left join, and for some
reason, if i store it into a procedure, it doesnt work, if i run it in query analyzer
i have no problem.

Manual Code:

create PROCEDURE search_orders_11

@SPSirvarchar(3)= null,
@debug bit = 0 AS

DECLARE @sql nvarchar(4000),
@paramlist nvarchar(4000)

if @spsir='1'
select @sql = @sql+ 'SELECT o.state_abbrv, count(o.state_abbrv) as kount FROM dbo.mortgage o left join dbo.Spanish s on o.per1_lname = s.lname'

select @sql=@sql+' WHERE 1 = 1'

SELECT @sql = @sql + ' group by o.state_abbrv ORDER BY o.state_abbrv '



here is the procedure:

create PROCEDURE search_orders_11

@SPSirvarchar(3)= null,
@debug bit = 0 AS

DECLARE @sql nvarchar(4000),
@paramlist nvarchar(4000)

if @spsir='1'
select @sql = @sql+ 'SELECT o.state_abbrv, count(o.state_abbrv) as kount FROM dbo.mortgage o left join dbo.Spanish s on o.per1_lname = s.lname'

select @sql=@sql+' WHERE 1 = 1'

SELECT @sql = @sql + ' group by o.state_abbrv ORDER BY o.state_abbrv '



here is the execution:


exec search_orders_11 @spsir=1



i get the whole command completed sucessfully, but no result. am i missing something here...

View 11 Replies View Related

Empty DB Structure

Apr 24, 2007

Hi,

I have to change collation for certain database. I think the only solution is to export or create through scripts the empty db structure (tables, PK & FK, defaults) and thereafter import data.
Since I don't have empty structure of this database I have to create somehow from the existing one which is with data, can somebody suggest how can I do this - take out the structure of the database from the db with data on it. I have 256 tables and I have to order them first with the dependencies of the tables?!

I will be really thankfull if somebody can help me on this issue.

Thnks,
sqlzagi

View 3 Replies View Related

Sort Empty Last

Nov 14, 2007

Is there any way to sort your results in a way that the empty results comes last? When I sort my recordset on a certain column I first get the empty values and the A, B, C etc. I would like to have it A, B, C, ..., Empty ones.

Regards
Ajmufic

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved