Error, The Data Types Text And Nvarchar Are Incompatible In The Equal To Operator

Jan 3, 2006

Hi, i have a table in sqlexpress named Contacts:

ID   (int)   -primary key-

name   (varchar(30))

lastname   (varchar(30))

phone   (varchar(15))

fax   (varchar(15))

desc   (text)

In my default.aspx page, i have a GridView that has the conecction to this table. The GridView has the Editing and Deleting checkbox enabled but my problem is that i can't edit or delete any row when the page is running and the massage is this: "The data types text and nvarchar are incompatible in the equal to operator"

It would have to work, but i don't know what happen, Please, any help!

View 8 Replies


ADVERTISEMENT

The Data Types Text And Nvarchar Are Incompatible In The Equal To Operator.

Jun 24, 2006

The following is the full error message.  I am posting the code after.

Server Error in '/XprtDr' Application.


The data types text and nvarchar are incompatible in the equal to operator.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: The data types text and nvarchar are incompatible in the equal to operator.Source Error:



An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:



[SqlException (0x80131904): The data types text and nvarchar are incompatible in the equal to operator.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +95
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +82
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +346
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +3244
System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) +186
System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) +1121
System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) +334
System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) +407
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +149
System.Web.UI.WebControls.SqlDataSourceView.ExecuteDbCommand(DbCommand command, DataSourceOperation operation) +493
System.Web.UI.WebControls.SqlDataSourceView.ExecuteUpdate(IDictionary keys, IDictionary values, IDictionary oldValues) +915
System.Web.UI.DataSourceView.Update(IDictionary keys, IDictionary values, IDictionary oldValues, DataSourceViewOperationCallback callback) +179
System.Web.UI.WebControls.FormView.HandleUpdate(String commandArg, Boolean causesValidation) +1197
System.Web.UI.WebControls.FormView.HandleEvent(EventArgs e, Boolean causesValidation, String validationGroup) +545
System.Web.UI.WebControls.FormView.OnBubbleEvent(Object source, EventArgs e) +163
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56
System.Web.UI.WebControls.FormViewRow.OnBubbleEvent(Object source, EventArgs e) +118
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +56
System.Web.UI.WebControls.LinkButton.OnCommand(CommandEventArgs e) +106
System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument) +177
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +31
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +32
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +242
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3838



Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
--------------------------------------------------------------------------------------------------------------------------
<%@ Page Language="VB" AutoEventWireup="true" CodeFile="CompanyDetails.aspx.vb" Inherits="CompanyDetails" %>
<%@ Register Assembly="EasyListBox" Namespace="ELB" TagPrefix="ELB" %>
<!--
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
-->
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<script runat="server">
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
If User.Identity.IsAuthenticated = False Then
Server.Transfer("login.aspx")
Else
Me.uId.Text = Membership.GetUser().ToString()
End If
End Sub
</script>
<html xmlns="http://www.w3.org/1999/xhtml" >
<head runat="server">
<title>Untitled Page</title>
</head>
<body>
<form id="form1" runat="server">
<div>
&nbsp;</div>
<asp:TextBox ID="uId" runat="server" Style="z-index: 100; left: 456px; position: absolute;
top: 512px" Visible="False" Width="4px"></asp:TextBox>
&nbsp;&nbsp;
<table style="z-index: 101; left: 24px; width: 572px; position: absolute; top: 44px;
height: 404px">
<tr>
<td style="width: 2px; height: 10px">
</td>
<td style="width: 651px; height: 10px">
</td>
<td style="width: 5px; height: 10px">
</td>
</tr>
<tr>
<td style="width: 2px; height: 435px">
</td>
<td style="width: 651px; height: 435px">
<asp:FormView ID="FormView1" runat="server" BackColor="White" BorderColor="#DEDFDE"
BorderStyle="None" BorderWidth="1px" CellPadding="4" DataKeyNames="indexNo" DataSourceID="CompanyDetails_MainForm"
ForeColor="Black" GridLines="Vertical" Height="500px" Style="z-index: 32; left: 12px;
position: absolute; top: 28px" Width="600px">
<FooterStyle BackColor="#CCCC99" />
<EditRowStyle BackColor="#CE5D5A" Font-Bold="True" ForeColor="White" />
<EditItemTemplate>
<asp:Label ID="TitleLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 20px" Text='Name:' Width="100px" ></asp:Label>
<asp:label ID="TitleTextBox" runat="server" Style=" z-index: 100; left: 120px; position: absolute;
top: 20px" Text='<%# Bind("Title") %>' Width="450px"></asp:label>
<asp:Label ID="YearEstLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 50px" Text='Established:' Width="100px" ></asp:Label>
<asp:TextBox ID="yearEstTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 50px" Text='<%# Bind("yearEst") %>' Width="50px" ></asp:TextBox>
<asp:Label ID="EmployeeCountLabelEdit" runat="server" Style="z-index: 100; left: 375px; position: absolute;
top: 50px" Text='No. of Employees:' Width="140px" ></asp:Label>
<asp:TextBox ID="employeeCountTextBox" runat="server" Style="z-index: 100; left: 535px; position: absolute;
top: 50px" Text='<%# Bind("employeeCount") %>' Width="35px" ></asp:TextBox>
<asp:Label ID="Address1LabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 80px" Text='Address:' Width="100px" ></asp:Label>
<asp:TextBox ID="Address_1TextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 80px" Width="450px" Text='<%# Bind("Address_1") %>'></asp:TextBox>
<asp:Label ID="Address2LabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 110px" Text='Address2:' Width="100px" ></asp:Label>
<asp:Label ID="Adress2OptionalLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 125px" Text='(Optional):' Width="100px" ></asp:Label>
<asp:TextBox ID="Address_2TextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 110px" Width="450px" Text='<%# Bind("Address_2") %>'></asp:TextBox>
<asp:Label ID="ContactsLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 160px" Text='Contacts:' Width="100px" ></asp:Label>
<asp:TextBox ID="ContactsTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 160px" Width="450px" Text='<%# Bind("Contacts") %>'></asp:TextBox>
<asp:Label ID="TelNosLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 190px" Text='Telephone Nos.:' Width="115px" ></asp:Label>
<asp:TextBox ID="TelNosTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 190px" Width="450px" Text='<%# Bind("TelNos") %>'></asp:TextBox>
<asp:Label ID="FaxNosLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 220px" Text='Fax Nos.:' Width="100px" ></asp:Label>
<asp:TextBox ID="FaxNosTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 220px" Width="450px" Text='<%# Bind("FaxNos") %>'></asp:TextBox>
<asp:Label ID="EmailLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 250px" Text='E-mail:' Width="100px" ></asp:Label>
<asp:TextBox ID="emailAddressesTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 250px" Width="450px" Text='<%# Bind("emailAddresses") %>'></asp:TextBox><br />
<asp:Label ID="WebsiteLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 280px" Text='Website:' Width="100px" ></asp:Label>
<asp:TextBox ID="WebsiteTextBox" runat="server" Style="z-index: 100; left: 120px; position: absolute;
top: 280px" Width="450px" Text='<%# Bind("Website") %>'></asp:TextBox>
<asp:Label ID="ManufacturingSectorLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 310px" Text='Manufacturing' Width="100px" ></asp:Label>
<asp:Label ID="ManufacturingSubSectorsLabel2Edit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 325px" Text='Sub-sectors:' Width="100px" ></asp:Label>
<asp:Label ID="ServicesSubSectorsLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 355px" Text='Services' Width="100px" ></asp:Label>
<asp:Label ID="ServicesSubSectorsLabel2Edit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 370px" Text='Sub-sectors:' Width="100px" ></asp:Label>
<asp:Label ID="ImportSourcesLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 390px" Text='Import Sources:' Width="100px" ></asp:Label>


<asp:Label ID="ExportDestinationsLabelEdit" runat="server" Style="z-index: 100; left: 5px; position: absolute;
top: 420px" Text='Export Destinations:' Width="100px" ></asp:Label>

<asp:LinkButton ID="UpdateButton" runat="server" style="z-index: 100;left: 5px; position:absolute; top: 460px" CausesValidation="True" CommandName="Update"
Text="Update"></asp:LinkButton>
<asp:LinkButton ID="UpdateCancelButton" runat="server" style="z-index: 100;left: 70px; position:absolute; top: 460px" CausesValidation="False" CommandName="Cancel"
Text="Cancel"></asp:LinkButton>
</EditItemTemplate>
<RowStyle BackColor="#F7F7DE" />
<PagerStyle BackColor="#F7F7DE" ForeColor="Black" HorizontalAlign="Right" />
<InsertItemTemplate>
indexNo:
<asp:TextBox ID="indexNoTextBox" runat="server" Text='<%# Bind("indexNo") %>'>
</asp:TextBox><br />
userName:
<asp:TextBox ID="userNameTextBox" runat="server" Text='<%# Bind("userName") %>'>
</asp:TextBox><br />
Title:
<asp:TextBox ID="TitleTextBox" runat="server" Text='<%# Bind("Title") %>'>
</asp:TextBox><br />
yearEst:
<asp:TextBox ID="yearEstTextBox" runat="server" Text='<%# Bind("yearEst") %>'>
</asp:TextBox><br />
employeeCount:
<asp:TextBox ID="employeeCountTextBox" runat="server" Text='<%# Bind("employeeCount") %>'>
</asp:TextBox><br />
Address_1:
<asp:TextBox ID="Address_1TextBox" runat="server" Text='<%# Bind("Address_1") %>'>
</asp:TextBox><br />
Address_2:
<asp:TextBox ID="Address_2TextBox" runat="server" Text='<%# Bind("Address_2") %>'>
</asp:TextBox><br />
Contacts:
<asp:TextBox ID="ContactsTextBox" runat="server" Text='<%# Bind("Contacts") %>'>
</asp:TextBox><br />
TelNos:
<asp:TextBox ID="TelNosTextBox" runat="server" Text='<%# Bind("TelNos") %>'>
</asp:TextBox><br />
FaxNos:
<asp:TextBox ID="FaxNosTextBox" runat="server" Text='<%# Bind("FaxNos") %>'>
</asp:TextBox><br />
emailAddresses:
<asp:TextBox ID="emailAddressesTextBox" runat="server" Text='<%# Bind("emailAddresses") %>'>
</asp:TextBox><br />
Website:
<asp:TextBox ID="WebsiteTextBox" runat="server" Text='<%# Bind("Website") %>'>
</asp:TextBox><br />
ManufacturingSubSectors_id:
<asp:TextBox ID="ManufacturingSubSectors_idTextBox" runat="server" Text='<%# Bind("ManufacturingSubSectors_id") %>'>
</asp:TextBox><br />
ServicesSubSectors_id:
<asp:TextBox ID="ServicesSubSectors_idTextBox" runat="server" Text='<%# Bind("ServicesSubSectors_id") %>'>
</asp:TextBox><br />
ExportDestinations_id:
<asp:TextBox ID="ExportDestinations_idTextBox" runat="server" Text='<%# Bind("ExportDestinations_id") %>'>
</asp:TextBox><br />
ImportSources_id:
<asp:TextBox ID="ImportSources_idTextBox" runat="server" Text='<%# Bind("ImportSources_id") %>'>
</asp:TextBox><br />
<asp:LinkButton ID="InsertButton" runat="server" CausesValidation="True" CommandName="Insert"
Text="Insert">
</asp:LinkButton>
<asp:LinkButton ID="InsertCancelButton" runat="server" CausesValidation="False" CommandName="Cancel"
Text="Cancel">
</asp:LinkButton>
</InsertItemTemplate>
<ItemTemplate>
Title:
<asp:Label ID="TitleLabel" runat="server" Text='<%# Bind("Title") %>'></asp:Label><br />
yearEst:
<asp:Label ID="yearEstLabel" runat="server" Text='<%# Bind("yearEst") %>'></asp:Label><br />
employeeCount:
<asp:Label ID="employeeCountLabel" runat="server" Text='<%# Bind("employeeCount") %>'></asp:Label><br />
Address_1:
<asp:Label ID="Address_1Label" runat="server" Text='<%# Bind("Address_1") %>'></asp:Label><br />
Address_2:
<asp:Label ID="Address_2Label" runat="server" Text='<%# Bind("Address_2") %>'></asp:Label><br />
Contacts:
<asp:Label ID="ContactsLabel" runat="server" Text='<%# Bind("Contacts") %>'></asp:Label><br />
TelNos:
<asp:Label ID="TelNosLabel" runat="server" Text='<%# Bind("TelNos") %>'></asp:Label><br />
FaxNos:
<asp:Label ID="FaxNosLabel" runat="server" Text='<%# Bind("FaxNos") %>'></asp:Label><br />
emailAddresses:
<asp:Label ID="emailAddressesLabel" runat="server" Text='<%# Bind("emailAddresses") %>'></asp:Label><br />
Website:
<asp:Label ID="WebsiteLabel" runat="server" Text='<%# Bind("Website") %>'></asp:Label><br />
ManufacturingSubSectors_id:
<asp:Label ID="ManufacturingSubSectors_idLabel" runat="server" Text='<%# Bind("ManufacturingSubSectors_id") %>'></asp:Label><br />
ServicesSubSectors_id:
<asp:Label ID="ServicesSubSectors_idLabel" runat="server" Text='<%# Bind("ServicesSubSectors_id") %>'></asp:Label><br />
ExportDestinations_id:
<asp:Label ID="ExportDestinations_idLabel" runat="server" Text='<%# Bind("ExportDestinations_id") %>'></asp:Label><br />
ImportSources_id:
<asp:Label ID="ImportSources_idLabel" runat="server" Text='<%# Bind("ImportSources_id") %>'></asp:Label><br />
<asp:LinkButton ID="EditButton" runat="server" CausesValidation="False" CommandName="Edit"
Text="Edit"></asp:LinkButton>
&nbsp;
</ItemTemplate>
<HeaderStyle BackColor="#6B696B" Font-Bold="True" ForeColor="White" />
</asp:FormView>
<asp:SqlDataSource ID="CompanyDetails_MainForm" runat="server" ConflictDetection="CompareAllValues"
ConnectionString="<%$ ConnectionStrings:ConnectionString_companyDetails %>" DeleteCommand="DELETE FROM [companyDetails] WHERE [indexNo] = @original_indexNo AND [userName] = @original_userName AND [Title] = @original_Title AND [yearEst] = @original_yearEst AND [employeeCount] = @original_employeeCount AND [Address_1] = @original_Address_1 AND [Address_2] = @original_Address_2 AND [Contacts] = @original_Contacts AND [TelNos] = @original_TelNos AND [FaxNos] = @original_FaxNos AND [emailAddresses] = @original_emailAddresses AND [Website] = @original_Website AND [ManufacturingSubSectors_id] = @original_ManufacturingSubSectors_id AND [ServicesSubSectors_id] = @original_ServicesSubSectors_id AND [ExportDestinations_id] = @original_ExportDestinations_id AND [ImportSources_id] = @original_ImportSources_id"
InsertCommand="INSERT INTO [companyDetails] ([indexNo], [userName], [Title], [yearEst], [employeeCount], [Address_1], [Address_2], [Contacts], [TelNos], [FaxNos], [emailAddresses], [Website], [ManufacturingSubSectors_id], [ServicesSubSectors_id], [ExportDestinations_id], [ImportSources_id]) VALUES (@indexNo, @userName, @Title, @yearEst, @employeeCount, @Address_1, @Address_2, @Contacts, @TelNos, @FaxNos, @emailAddresses, @Website, @ManufacturingSubSectors_id, @ServicesSubSectors_id, @ExportDestinations_id, @ImportSources_id)"
OldValuesParameterFormatString="original_{0}" SelectCommand="SELECT [indexNo], [userName], [Title], [yearEst], [employeeCount], [Address_1], [Address_2], [Contacts], [TelNos], [FaxNos], [emailAddresses], [Website], [ManufacturingSubSectors_id], [ServicesSubSectors_id], [ExportDestinations_id], [ImportSources_id] FROM [companyDetails] WHERE ([userName] = @userName)"
UpdateCommand="UPDATE [companyDetails] SET [yearEst] = @yearEst, [employeeCount] = @employeeCount, [Address_1] = @Address_1, [Address_2] = @Address_2, [Contacts] = @Contacts, [TelNos] = @TelNos, [FaxNos] = @FaxNos, [emailAddresses] = @emailAddresses, [Website] = @Website, [ManufacturingSubSectors_id] = @ManufacturingSubSectors_id, [ServicesSubSectors_id] = @ServicesSubSectors_id, [ExportDestinations_id] = @ExportDestinations_id, [ImportSources_id] = @ImportSources_id WHERE [indexNo] = @original_indexNo AND [userName] = @original_userName AND [Title] = @original_Title AND [yearEst] = @original_yearEst AND [employeeCount] = @original_employeeCount AND [Address_1] = @original_Address_1 AND [Address_2] = @original_Address_2 AND [Contacts] = @original_Contacts AND [TelNos] = @original_TelNos AND [FaxNos] = @original_FaxNos AND [emailAddresses] = @original_emailAddresses AND [Website] = @original_Website AND [ManufacturingSubSectors_id] = @original_ManufacturingSubSectors_id AND [ServicesSubSectors_id] = @original_ServicesSubSectors_id AND [ExportDestinations_id] = @original_ExportDestinations_id AND [ImportSources_id] = @original_ImportSources_id">
<DeleteParameters>
<asp:Parameter Name="original_indexNo" Type="Int32" />
<asp:Parameter Name="original_userName" Type="String" />
<asp:Parameter Name="original_Title" Type="String" />
<asp:Parameter Name="original_yearEst" Type="Int32" />
<asp:Parameter Name="original_employeeCount" Type="Int32" />
<asp:Parameter Name="original_Address_1" Type="String" />
<asp:Parameter Name="original_Address_2" Type="String" />
<asp:Parameter Name="original_Contacts" Type="String" />
<asp:Parameter Name="original_TelNos" Type="String" />
<asp:Parameter Name="original_FaxNos" Type="String" />
<asp:Parameter Name="original_emailAddresses" Type="String" />
<asp:Parameter Name="original_Website" Type="String" />
<asp:Parameter Name="original_ManufacturingSubSectors_id" Type="String" />
<asp:Parameter Name="original_ServicesSubSectors_id" Type="String" />
<asp:Parameter Name="original_ExportDestinations_id" Type="String" />
<asp:Parameter Name="original_ImportSources_id" Type="String" />
</DeleteParameters>
<UpdateParameters>
<asp:Parameter Name="userName" Type="String" />
<asp:Parameter Name="Title" Type="String" />
<asp:Parameter Name="yearEst" Type="Int32" />
<asp:Parameter Name="employeeCount" Type="Int32" />
<asp:Parameter Name="Address_1" Type="String" />
<asp:Parameter Name="Address_2" Type="String" />
<asp:Parameter Name="Contacts" Type="String" />
<asp:Parameter Name="TelNos" Type="String" />
<asp:Parameter Name="FaxNos" Type="String" />
<asp:Parameter Name="emailAddresses" Type="String" />
<asp:Parameter Name="Website" Type="String" />
<asp:Parameter Name="ManufacturingSubSectors_id" Type="String" />
<asp:Parameter Name="ServicesSubSectors_id" Type="String" />
<asp:Parameter Name="ExportDestinations_id" Type="String" />
<asp:Parameter Name="ImportSources_id" Type="String" />
<asp:Parameter Name="original_indexNo" Type="Int32" />
<asp:Parameter Name="original_userName" Type="String" />
<asp:Parameter Name="original_Title" Type="String" />
<asp:Parameter Name="original_yearEst" Type="Int32" />
<asp:Parameter Name="original_employeeCount" Type="Int32" />
<asp:Parameter Name="original_Address_1" Type="String" />
<asp:Parameter Name="original_Address_2" Type="String" />
<asp:Parameter Name="original_Contacts" Type="String" />
<asp:Parameter Name="original_TelNos" Type="String" />
<asp:Parameter Name="original_FaxNos" Type="String" />
<asp:Parameter Name="original_emailAddresses" Type="String" />
<asp:Parameter Name="original_Website" Type="String" />
<asp:Parameter Name="original_ManufacturingSubSectors_id" Type="String" />
<asp:Parameter Name="original_ServicesSubSectors_id" Type="String" />
<asp:Parameter Name="original_ExportDestinations_id" Type="String" />
<asp:Parameter Name="original_ImportSources_id" Type="String" />
</UpdateParameters>
<SelectParameters>
<asp:ControlParameter ControlID="uId" Name="userName" PropertyName="Text" Type="String" />
</SelectParameters>
<InsertParameters>
<asp:Parameter Name="indexNo" Type="Int32" />
<asp:Parameter Name="userName" Type="String" />
<asp:Parameter Name="Title" Type="String" />
<asp:Parameter Name="yearEst" Type="Int32" />
<asp:Parameter Name="employeeCount" Type="Int32" />
<asp:Parameter Name="Address_1" Type="String" />
<asp:Parameter Name="Address_2" Type="String" />
<asp:Parameter Name="Contacts" Type="String" />
<asp:Parameter Name="TelNos" Type="String" />
<asp:Parameter Name="FaxNos" Type="String" />
<asp:Parameter Name="emailAddresses" Type="String" />
<asp:Parameter Name="Website" Type="String" />
<asp:Parameter Name="ManufacturingSubSectors_id" Type="String" />
<asp:Parameter Name="ServicesSubSectors_id" Type="String" />
<asp:Parameter Name="ExportDestinations_id" Type="String" />
<asp:Parameter Name="ImportSources_id" Type="String" />
</InsertParameters>
</asp:SqlDataSource>
</td>
<td style="width: 5px; height: 435px">
</td>
</tr>
<tr>
<td style="width: 2px">
</td>
<td style="width: 651px">
</td>
<td style="width: 5px">
</td>
</tr>
</table>
</form>
</body>
</html>

View 5 Replies View Related

Error: The Data Types Text And Text Are Incompatible In The Equal To Operator.

Apr 25, 2006

I get this error:
The data types text and text are incompatible in the equal to operator.
when trying to execute this query
SELECT id FROM users WHERE username=@userName
 
 
Any Ideas?

View 3 Replies View Related

Data Types XML And Varchar Are Incompatible In Equal To Operator

Feb 6, 2014

I am trying to solve an issue in SQL but am getting this error

The data types xml and varchar are incompatible in the equal to operator.

My Query is fairly long. How I can resolve this?

UPDATE Promotions
SET PromotionDiscountData = '<ArrayOfPromotionRuleBase xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><PromotionRuleBase xsi:type="ProductIdPromotionRule"><ProductIds><int>13,16,15215,15223,15225,15227,15231,15261,15266,15267,15272,15274,15276,15277,15288,15289,
15290,15292,15293,15297,15299,15316,15329,15336,53787,53788,53789,55872,55873,55874</int></ProductIds>

[Code] ....

View 2 Replies View Related

The Data Types Ntext And Varchar Are Incompatible In The Equal To Operator

Feb 25, 2006

Hi,
If I make a select query on my table, this error appears:
"The data types text and varchar are incompatible in the equal to operator"
 
In my table , I have 4 fields with "text" datatype.
My query is like : "Select * from table where field1='test'"
It's seems to be simple, but it doesn't work!!!
 
Thanks

View 2 Replies View Related

Integration Services :: Error - The Data Types Are Incompatible For Conditional Operator

May 22, 2015

Im reading in a CSV wiht double quote text delimiters. Data came from mySQL.

One column in mySql is text(65535) which is equivalent to varchar(max) as far as i understand.

This particular column can be blank, not null, just blank. If its blank i want to put in a value so i added a Derived column shape and added the following formula:

LEN(my_Column) < 1 ?  "" :  (DT_TEXT)my_Column

I get the below error from this expression:

 The data types "DT_WSTR" and "DT_TEXT" are incompatible for the conditional operator. The operand types cannot be implicitly cast into compatible types for the conditional operation. To perform this operation, one or both operands need to be explicitly cast with a cast operator.

I have tried this without casting but still get an error. As I have configured the column in the flatfile connector as DT_TEXT, im not sure where its getting DT_STR from.

View 5 Replies View Related

The Data Types Varchar And Bit Are Incompatible In The Add Operator

Feb 18, 2008

Hello,

I am trying to write a small dynamic sql statement and I am receiving the following error when working with a bit data type.

The data types varchar and bit are incompatible in the add operator

Here is what I have:




Code Snippet
create proc [dbo].[usp_SetupDatabaseUser]
(
@ProcAccess bit = 0
)
as
begin

set nocount on

declare @sql nvarchar(MAX)

-- Check for user existence
select @sql = 'if (' + @ProcAccess + ' = 1)




begin

print ''Hello World''

end'

exec @sql
end






After I execute, that is why I receive the error. Any advice would be appreciated!

Thanks,
Flea#

View 5 Replies View Related

The Data Types Varchar And Varchar Are Incompatible In The Modulo Operator

Jan 4, 2008

I am trying to create a store procedure inside of SQL Management Studio console and I kept getting errors. Here's my store procedure.




Code Block
CREATE PROCEDURE [dbo].[sqlOutlookSearch]
-- Add the parameters for the stored procedure here
@OLIssueID int = NULL,
@searchString varchar(1000) = NULL
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
IF @OLIssueID <> 11111
SELECT * FROM [OLissue], [Outlook]
WHERE [OLissue].[issueID] = @OLIssueID AND [OLissue].[issueID] = [Outlook].[issueID] AND [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
ELSE
SELECT * FROM [Outlook]
WHERE [Outlook].[contents] LIKE + ''%'' + @searchString + ''%''
END




And the error I kept getting is:

Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 18

The data types varchar and varchar are incompatible in the modulo operator.

Msg 402, Level 16, State 1, Procedure sqlOutlookSearch, Line 21

The data types varchar and varchar are incompatible in the modulo operator.

Any help is appreciated.

View 5 Replies View Related

Incompatible Data Types In SQL EXP 2005

Jan 25, 2006

I'm trying to read a data table with all text fields using C# in ado.net. However, when my query runs, it always returns this error:

"The data types text and varchar are incompatible in the equal to operator. "

The SQL statment is "SELECT field1, field2 FROM table WHERE field1 = 'value'"

If I leave out the WHERE clause, it runs fine. There are NO varchar fields in my entire table (It's a test table). I've tried using both parameter objects and Convert (See commented section) with no luck. A packet trace shows the SQL string is being delivered in tact and the SQL server is returning the error. I don't know if it's a C# client issue, or a SQL Server 2005 Exp issue. The table was created using MS SQL Server Management Studio Express I'm currently using the SqlClient object like this:

<script runat="server">
DataSet dsData = new DataSet();
DataTable dtData = new DataTable();

void Page_Load()
{
string strConn = ConfigurationSettings.AppSettings["authstr"];
string strSQL = "SELECT User_ID, User_Name FROM USERS1 WHERE User_ID = "'bobhope'";


//string strSQL = "SELECT password_fld, pharmacy_fld FROM Esker_Tbl WHERE CONVERT(text, username_fld ) = '@prmuser'";
//SqlParameter spuser = new SqlParameter("@prmuser", SqlDbType.Text);

//string struser = "bobhope";
//spuser.Value = struser;
try
{
SqlConnection Conn = new SqlConnection(strConn);
SqlCommand Cmd = new SqlCommand(strSQL, Conn);
SqlDataAdapter Adp = new SqlDataAdapter(Cmd);

Conn.Open();
Adp.Fill(dsData, "USERS1");
dtData = dsData.Tables["USERS1"];
dgData.DataSource = dtData;
dgData.DataBind();
dgData.Visible = true;

}
catch (Exception ex)
{
string strmessage = "";
strmessage = "Unable to access database: " + ex.Message;
lblMessage.Text = strmessage;
}
return;
}

View 4 Replies View Related

Lookup Transform - Incompatible Data Types Mistery

Jul 10, 2007

I have a package that works fine in development. I move the package over to test and it fails validation in the lookup transform.



Error 46 Validation error. Data Flow Task - PO Lines Interface: Lookup - LIST PRICE [29621]: output column "LIST_PRICE_PER_UNIT" (29667) and reference column named "LIST_PRICE_PER_UNIT" have incompatible data types. SPO_TO_ORACLE_PO.dtsx 0 0




What strikes me as odd is the fact that I don't have a way of specifying the data types. I just specify the column I wish to return as a new column with the same name. Anyway, why would this work in one instance but not another?



thanks

John

View 4 Replies View Related

Integration Services :: SSIS Conditional Split Transformation Data Types Are Incompatible

Aug 24, 2015

I am importing the values for field Atype from a .csv file as DT_STR, 13 and I need to fit them into a bit type CType field.

When I write the conditional split ((ISNULL(Atype)?"a":Atype)!=(ISNULL(CType)?"9":CType)) it says that the DT_WSTR and DT_I4 types are incompatible and that I need to explicitly cast with a cast operator. I haven't been able to make it work, how to explicitly cast?

View 4 Replies View Related

Error 409: The Assignment Operator Operation Could Not Take A Text Data Type As An Argument

Aug 2, 2004

How can I make it work when I need to pull out a field which is text type using a stored procedure? Please help!!!Thanks
I am getting the following error
Error 409: The assignment operator operation could not take a text data type as an argument
===========my sp=================================
CREATE PROCEDURE [dbo].[sp_SelectABC]
(@a varchar(50) output,
@b text output
)
AS
set nocount on
select @a=name, @b= description from ABC

GO

View 1 Replies View Related

Incompatible In The Boolean AND Operator

Apr 21, 2008

I'm new to databases. So I'm writing code in c# to search a database. Here is the following SQL statement I'm trying to use:
SELECT Movies.Movie, Movies.Genre, Movies.ReleasedFROM Movies INNER JOIN MovieActor ON Movies.Movie = MovieActor.MovieWHERE (MovieActor.Movie = '% ' & @name & ' %')

When I go to test the statement it says that "Data types varchar and varchar are incompatible in the boolean AND operator."
Any ideas around this?

View 6 Replies View Related

Operand Data Type Nvarchar Is Invalid For Sum Operator

Jun 13, 2014

I am using the below query for calculation and I get this error.

Operand data type nvarchar is invalid for sum operator.

'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Pre Override Cost]),0),0) as money) + 1 -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PreOverride L2],

'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Post Override Cost]),0),0) as money) -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PostOverride L2]

View 6 Replies View Related

Invalid Operator For Data Type. Operator Equals Boolean AND, Type Equals Nvarchar

Jun 2, 2004

I get this error when I attempt to read from a datareader using the following sql statement:

Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"

my reader command list as follows:

Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader


Any ideas on where I am going wrong?

Thanks in advance

View 3 Replies View Related

Using Nvarchar(max) For All Data Types In A Survey System

Apr 23, 2008

I am working on a survey system with another DB Engineer.Our current design includes 1 table per Question Type (Numeric, Boolean, Text), Response values are tightly coupled based on data being entered, to keep things simple assume there are only 6 tables in this this system (1 for each Question Type to define the "rules" of the data entered, and 1 for each Response collection).He is a former .Net programmer and has been talking with the .Net guys on the project and he is proposing that we abstract our Question Types to use one table and store the Input Values all as nvarchar(max).This obviously simplifies the DB design and reduces the amount of work I will need to do so I should be all for it. I guess I am a little concerned that we are no longer tightly coupling the data types and essentially leaving all the validation up to the application. Also should I be worried that a bunch of bit data will be stored as 1/0 in an nvarchar(max) column?Thanks,-John

View 13 Replies View Related

Usage Of Varchar/nvarchar Data Types

Oct 2, 2007

I am coming to SQL Server from Access and using it mostly for making ASP.NET web apps.

I am not sure I correctly understand the characteristics of the varchar data type and I'm so far unable to find a basic explanation.

It seems that the benefit of this data type is that the actual disk storage involved varies according to what is in a given record's column. So for a column defined as varchar(500), a record where the column uses all 500 characters will use more bytes on disk than a record where the column uses only one.

This would seem to imply that unless there were some reason to limit the characters allowed into a column, it would be an advantage to define large columns, say varchar(8000), especially for memo type fields, or fields such as addresses where it seems like clients are always asking for more space as time passes.

Is this right? Is there any downside to defining large varchar columns assuming they do not conflict with business rules?

Many thanks
Mike Thomas

View 5 Replies View Related

Nvarchar Is Incompatible With Image

Oct 6, 2007

1 file.SaveAs("F://images/" + file.GetName(), true);
this was successfully stored in folder
2 SqlCommand sqlcmd = new SqlCommand("insert into tblCategories (CatImage) values (@CatImage)", sqlcon);
sqlcmd.Parameters.Add("@CatImage", file.GetName ());
sqlcmd.ExecuteNonQuery();
 I gave datatype for CatImage is image.
error:nvarchar is incompatible with image
 
 
so wat i have to do
please give me suggestions
regards
kishore

View 2 Replies View Related

Negative Sign (unary Operator) Not Displayed For Numeric Data Types

Feb 20, 2007

I have a table with a field that has a numeric data type (15,2) and length of 9. The problem is that it won't display the actual negative sign for any values less than 0 when running a query. Any ideas? I've used Query Analyzer as well as Access.

Thanks.

View 8 Replies View Related

Data Types (char, Varchar, Nchar, Nvarchar, ...)

Jul 27, 2007

Could someone please help me by explaining which one is best to use and when?  For example, storing the word "Corona Del Mar" - which Data Type would be suggested?
 Thanks.

View 3 Replies View Related

Operand Type Clash: Nvarchar Is Incompatible With Image

Oct 4, 2006

I uploading an image from a web page into Sql Server 2000 database. I call a stored procedure with the parameter @Flag of type Image. When I tried to pass a null value to this parameter I got the error:"Operand type clash: nvarchar is incompatible with image".I was adding the parameter like this:sqlCmd.Parameters.AddWithValue("@Flag", DBNull.Value);After trying few different things I found a workaround using the following:sqlCmd.Parameters.Add("@Flag", SqlDbType.Image);sqlCmd.Parameters["@Flag"].Value = DBNull.Value;Possibly a bug in the SqlCommand.Parameters.AddWithValue method ?

View 1 Replies View Related

Text Data Types

Jan 2, 2001

Hello all. I am a newbie to the world of setting up SQL databases, so please forgive my ignorance.

I have a nice website for social workers to enter encounters with clients. The social worker has to provide very detailed notes about the encounter. I have set up a textarea to take in all of this information. I am wondering which is the best data type to use for the table that this information will be dumped into. I am currently using text, but I don't want to waste space on the server with whitespace. Is this the best way to go? It is not uncommon for upwards of 5000 characters to be entered. This site is powered by ColdFusion, if that makes any difference.

Thanks in advance,

Adrian Miller

View 1 Replies View Related

Storage Of Text Data Types

Jan 2, 2014

I trying to fully understand when to use different data types in sql server.I want to know what Microdoft means when they say"Varchar is the actual length of the data entered plus 2 bytes".example e.g. what would the storage of varchar (50) be?

View 7 Replies View Related

Text Datatype Incompatible With Itself?

Oct 13, 2006

Now, what does THIS mean??

"Data types text and text are incompatible in the equal to operator"

(I'm doing a CAST() to convert a quoted string to
Text, which is the data type of a column)

View 4 Replies View Related

How To Handle Text, Ntext Data Types Of SQL Server

Jan 8, 2004

i have created asp.net page, one feild of this page text area.
when i insert some text through this page in "text feild" of SQL server on few words of this feild cut and inserted to text feild of SQL server but all text that i have written in text area feild.

can u please help me how to handle so that i can all text in text feild of SQL server data type text/next.

View 2 Replies View Related

HELP: Text And Varchar Are Incompatible Agrivation!

Apr 26, 2007

I am trying to do a simple select statement on my db but keep getting the fallowing exception being thrown ...System.Web.Services.Protocols.SoapException was unhandled  Actor=""  Lang=""  Message="System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Data.SqlClient.SqlException: The data types text and varchar are incompatible in the equal to operator.   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)   at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()   at System.Data.SqlClient.SqlDataReader.get_MetaData()   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)   at System.Data.SqlClient.SqlCommand.ExecuteReader()   at RelayService.ValidAccessID(String ID) in C:Documents and SettingsDeanMy DocumentsVisual Studio 2005ProjectsMsgSRXMsgSRXServiceApp_CodeRelayService.vb:line 193   at RelayService.SendMessage(String msg, String AccessID, Int64& MsgID) in C:Documents and SettingsDeanMy DocumentsVisual Studio 2005ProjectsMsgSRXMsgSRXServiceApp_CodeRelayService.vb:line 377   --- End of inner exception stack trace ---"  Node=""  Role=""  Source="System.Web.Services"  StackTrace:       at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)       at ChatClient.MsgSRX.RelayService.SendMessage(String msg, String AccessID, Int64& MsgID) in C:Documents and SettingsDeanMy DocumentsVisual Studio 2005ProjectsMsgSRXChatClientWeb ReferencesMsgSRXReference.vb:line 342       at ChatClient.Form1.btnSend_Click(Object sender, EventArgs e) in C:Documents and SettingsDeanMy DocumentsVisual Studio 2005ProjectsMsgSRXChatClientForm1.vb:line 13       at System.Windows.Forms.Control.OnClick(EventArgs e)       at System.Windows.Forms.Button.OnClick(EventArgs e)       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)       at System.Windows.Forms.Control.WndProc(Message& m)       at System.Windows.Forms.ButtonBase.WndProc(Message& m)       at System.Windows.Forms.Button.WndProc(Message& m)       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)       at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)       at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)       at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)       at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)       at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)       at System.Windows.Forms.Application.Run(ApplicationContext context)       at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()       at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()       at Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)       at ChatClient.My.MyApplication.Main(String[] Args) in 17d14f5c-a337-4978-8281-53493378c1071.vb:line 81       at System.AppDomain.nExecuteAssembly(Assembly assembly, String[] args)       at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()       at System.Threading.ThreadHelper.ThreadStart_Context(Object state)       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)       at System.Threading.ThreadHelper.ThreadStart() ... Here is the source code to the method I am using ... Private Function ValidAccessID(ByVal ID As String) As Boolean        Dim conn As New SqlConnection()        conn.ConnectionString = ConfigurationManager.ConnectionStrings("dbConnect").ConnectionString        Dim cmd As String        cmd = "SELECT AccessID, ExpireTime "        cmd &= "FROM AccessIDNumbers "        cmd &= "WHERE AccessID IN ('" & ID & "')"        ' cmd &= "WHERE AccessID ='@ID'"        Dim C As New SqlCommand(cmd, conn)        ' C.Parameters.AddWithValue("@ID", New SqlTypes.SqlString(ID))        '  C.Parameters.Item("@ID").SqlDbType = SqlDbType.Text        conn.Open()        Dim Count As Integer = 0        Dim reader As SqlDataReader = C.ExecuteReader        Dim expired As Boolean = False        If reader.HasRows Then            While reader.Read                Count += 1                Dim et As SqlTypes.SqlDateTime                et = SqlTypes.SqlDateTime.Parse(reader("ExpireTime"))                Dim ct As New SqlTypes.SqlDateTime(Now)                If ct > et AndAlso expired = False Then expired = True            End While        End If        conn.Close()        C.Dispose()        C = Nothing        conn.Dispose()        conn = Nothing        Return expired = False    End Function ... the problem is with the  cmd &= "WHERE AccessID IN ('" & ID & "')" statement. How Can I get this to work properly!!! My data types for the AccessIDNumbers table are as fallows ..UserName -> text -> nulls not allowedAccessID -> text -> nulls not allowedCreationTime -> datatime -> nulls not allowedExpireTime -> datatime -> nulls not allowedCurrentTable -> text -> nulls allowedI don't understand why I'm getting this error!!! 

View 3 Replies View Related

Manipulating Text,nText Data Types Filed In Tsql

Jul 12, 2006

I have to run a dynamic sql that i save in the database as a TEXT data type(due to a large size of the sql.) from a .NET app.  Now i have to run this sql from the stored proc that returns the results back to .net app. I am running this dynamic sql with sp_executesql like this..
EXEC sp_executesql @Statement,N'@param1 varchar(3),@param2 varchar(1)',@param1,@param2,GO
As i can't declare text,ntext etc variables in T-Sql(stored proc), so i am using this method in pulling the text type field "Statement".
DECLARE @Statement varbinary(16)SELECT @Statement = TEXTPTR(Statement)FROM table1 READTEXT table1.statement @Statement 0 16566
So far so good, the issue is how to convert @Statment varbinary to nText to get it passed in sp_executesql.
Note:- i can't use Exec to run the dynamic sql becuase i need to pass the params from the .net app and Exec proc doesn't take param from the stored proc from where it is called.
I would appreciate if any body respond to this.
 
 
 

View 2 Replies View Related

Text Is Incompatible With Int When Attempting To Archive Table

Aug 7, 2015

I'm getting an operand type clash. Text is incompatible with int when attempting to archive table.

The table has several columns defined as Text.

[URL]

View 7 Replies View Related

Operand Type Clash - Int Is Incompatible With Text

Feb 24, 2014

I am trying to combine columns and add it to an existing table

insert into Future_Link.dbo.tbFLink (Fastighet, Anlaggning)
values (
(select strFastbeteckningTrakt + ' ' + strFastbeteckningBlock + strFastbeteckningTecken + intFastbeteckningEnhet
from EDPFutureGagnef.dbo.tbFuAnlaggning),
(select strAnlnr
from EDPFutureGagnef.dbo.tbFuAnlaggning)
)

Generate error:
Msg 206, Level 16, State 2, Line 1
Operand type clash: int is incompatible with text

View 2 Replies View Related

SQL Server 2005 - Transactional Replication Involving Depricated Text And Ntext Data Types

Dec 2, 2005

I'm currently trying out transactional replication with updatable subscriptions across two 2005 servers.

View 3 Replies View Related

Error: Invalid Operator For Data Type

Nov 9, 2007

this is an error i am getting trying to run the query below.
Invalid operator for data type. Operator equals minus, type equals varchar

SELECT regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename
FROM (SELECT regardingobjectidname, actualend, Owneridname, createdbyname, activitytypecodename, row_number() OVER (Partition BY
regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer
WHERE statecodename = 'completed') AS d
WHERE recid = 1 AND (owneridname IN (@user)) AND (activitytypecodename = 'phone call' OR
activitytypecodename = 'e-mail' OR
activitytypecodename = 'fax') AND (actualend > dateadd(d, -'
+ CONVERT(nVarChar(20), @NeglectedDays) + ',GetUTCDate()
ORDER BY actualend

Compnetsyslc

View 9 Replies View Related

Getting Server Error Syntax Error Converting The Nvarchar Value 'Sonoma' To A Column Of Data Type Int.

Apr 20, 2007

Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
 And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
 1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24

 
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07

View 2 Replies View Related

Desperate! - Need Simple MSSQL Server Monitoring Scripts, Ideas, Etc That Can Be Performed By Operator Types (non-programmers)

Jul 20, 2005

Does anyone have any basic, simple scripts of sp's that I can give mycomputer operators to use to monitor for serious conditions on our sqlservers? We are new in the ms-sql arena, a small shop and we cantreally purchase any tools to monitor these servers, but we need somebasic checks that we can use to make sure a server is performing in areasonable fashion, no blocks, cpu<xx%, memory not pegged, IO working,etc...and we need to be able to do this without bugging ourprogrammers every time we are wondering why things are slowwnig down.We are a split shop between as400s and sql servers, and our operationsstaff has no problem performing this type of duty on the 400s. I thinksince the sql servers are so easy to deploy into production, the ideaof how to monitor these things health got lost in the shuffle andallowing the programmers to do it just serves to destabilize ourenvironment.Please help! Our shop has turned to chaos since we went live withMSSQL centric applications and everytime one programmer "resolves anissue" some other programmers application starts to act up.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved