Error: Invalid Operator For Data Type
Nov 9, 2007
this is an error i am getting trying to run the query below.
Invalid operator for data type. Operator equals minus, type equals varchar
SELECT regardingobjectidname, actualend, owneridname, createdbyname, activitytypecodename
FROM (SELECT regardingobjectidname, actualend, Owneridname, createdbyname, activitytypecodename, row_number() OVER (Partition BY
regardingobjectid
ORDER BY actualend DESC) AS recid
FROM FilteredActivityPointer
WHERE statecodename = 'completed') AS d
WHERE recid = 1 AND (owneridname IN (@user)) AND (activitytypecodename = 'phone call' OR
activitytypecodename = 'e-mail' OR
activitytypecodename = 'fax') AND (actualend > dateadd(d, -'
+ CONVERT(nVarChar(20), @NeglectedDays) + ',GetUTCDate()
ORDER BY actualend
Compnetsyslc
View 9 Replies
ADVERTISEMENT
Jun 2, 2004
I get this error when I attempt to read from a datareader using the following sql statement:
Dim mysql As String = "SELECT PayrollTrans.PayrollID, Employees.[EmpFirstName] & ' ' & " _
& " Employees.[emplastname] AS FullName, Employees.[City] & ', ' & Employees.[State] & ' ' & Employees.[zip] AS CityState " _
& " , PayrollTrans.Date, PayrollTrans.EmployeeID, PayrollTrans.RegHours, " _
& " PayrollTrans.OTHours , PayrollTrans.RegPay, PayrollTrans.OTPay, " _
& " PayrollTrans.FedTax, PayrollTrans.FICATax, PayrollTrans.MedicareTax, " _
& " PayrollTrans.ESCTax, PayrollTrans.StateTax, PayrollTrans.ESCEMPTax, " _
& " PayrollTrans.FUTATax, PayrollTrans.NetPay, Employees.EmployeeID, " _
& " Employees.Address1, Employees.Address2, Employees.SSAN, " _
& " Employees.PayType, Employees.RegPayRate, Employees.OTPayRate, " _
& " Employees.MaritalStatus, Employees.FedExemption, Employees.StateExemption, " _
& " Employees.Active, Employees.SelectforPay, Employees.PayDate " _
& " FROM PayrollTrans, Employees where PayrollTrans.EmployeeID = Employees.EmployeeID;"
my reader command list as follows:
Dim objCM As New SqlClient.SqlCommand(mysql, SqlConnection1)
Dim objDR As SqlClient.SqlDataReader
objDR = objCM.ExecuteReader
Any ideas on where I am going wrong?
Thanks in advance
View 3 Replies
View Related
May 18, 2004
I am getting a error message saying: Invalid operator for data type. Operator equals boolean AND, type equals datetime.
I traced the pointer to @gdo and @gd, they are both dates!
INSERT INTO AdminAlerts values (CURRENT_USER, 'UPDATE', getDate(), @biui, 'Updated booking, ID of booking updated: ' & @biui & ', Booking date and time before/after update: ' & @gdo & '/' & @gd & ', Room number before/after update: ' & @rno & '/' & @rn & ' and Customer ID before/after update: ' & @cio & '/' & @ci)
If I cut that two dates out it works fine.
Could someone tell me the syntax to include a date in a string :confused:
View 3 Replies
View Related
Apr 28, 2006
What is wrong with this select statement?
SELECT lastName + ", " + firstName + " " + middleName as Name
FROM [users]
WHERE ([usrID] = 100)
I kept getting this error:
Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.
Help is appreciated.
View 6 Replies
View Related
Apr 28, 2006
What is wrong with this select statement:
SELECT lastName + ", " + firstname + " " + middleName + " " + maidenName as Name
FROM users
WHERE userID = 100;
I kept getting this error:
Msg 403, Level 16, State 1, Line 1
Invalid operator for data type. Operator equals add, type equals text.
Help is appreciated.
View 7 Replies
View Related
Oct 23, 2005
Kudos to y'all experts out there. I kinda needed your help. I'm trying to run a query...
SELECT a.AUF_POS AS Pos, c.ZL_STR AS Panel, a.POS_TEXT AS Description, a.BREITE AS W1, a.HOEHE
AS H1, a.BREITE2 AS W2, a.HOEHE2 AS H2, SUM(b.ANZ) AS Qty, SUM(b.LIEFER_ANZ) AS Dlvd,
SUM(b.RG_ANZ) AS Inv, (a.BREITE*a.HOEHE/CAST(1000000 AS NUMERIC)) AS UnitSQM,
(a.BREITE*a.HOEHE*SUM(b.ANZ)/CAST(1000000 AS NUMERIC)) as TotPosSQM
FROM liorder..LIORDER.AUF_POS a INNER JOIN liorder..LIORDER.AUF_STAT b ON a.AUF_NR = b.AUF_NR
AND a.AUF_POS = b.AUF_POS INNER JOIN liorder..LIORDER.AUF_TEXT c ON a.AUF_NR = c.AUF_NR AND
b.AUF_POS = c.AUF_POS
WHERE (c.ZL_MOD = 0) AND (b.AUF_NR = '86260')
GROUP BY a.AUF_POS, a.POS_TEXT, a.BREITE, a.BREITE2, a.HOEHE, a.HOEHE2, a.SFORM_NR, c.ZL_STR
...and I keep getting this error: Invalid operator for data type. Operator equals multiply, type equals nvarchar. I've tried every possible CAST and CONVERT but I just can't make it work. I'm pretty sure that the data types for the columns I mentioned on the mathematical equation are all numeric. Please help...
View 1 Replies
View Related
Jun 13, 2014
I am using the below query for calculation and I get this error.
Operand data type nvarchar is invalid for sum operator.
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Pre Override Cost]),0),0) as money) + 1 -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PreOverride L2],
'$ '+ REVERSE(SUBSTRING(REVERSE(CONVERT(varchar,(CAST(round(isnull(sum(t7.[Post Override Cost]),0),0) as money) -
cast(round(isnull(sum(t8.[Shared Dollars]),0),0)as money)),1)),4,255)) as [PostOverride L2]
View 6 Replies
View Related
Oct 23, 2015
I get this error "Operand data type varchar is invalid for divide operator".
select V.[Parent Name],
[ID],
round((V.SoftValue/VTMValue)*100,0) 'SPercentage',
round((V.HMUValue/VTMValue)*100,0) 'HPercentage2',
round((V.PrimaryValue/VTMValue)*100,0) 'PPercentage2'
[code]...
I have even converted the values to float.
View 5 Replies
View Related
Aug 2, 2004
How can I make it work when I need to pull out a field which is text type using a stored procedure? Please help!!!Thanks
I am getting the following error
Error 409: The assignment operator operation could not take a text data type as an argument
===========my sp=================================
CREATE PROCEDURE [dbo].[sp_SelectABC]
(@a varchar(50) output,
@b text output
)
AS
set nocount on
select @a=name, @b= description from ABC
GO
View 1 Replies
View Related
Apr 18, 2008
I am attempting to use a CLR Function to perform an update operation, since a SQL UDF will not allow this within the function. For the POC, I hard-coded the db connection string and setup the assembly to use EXTERNAL_ACCESS. This worked fine and the update operation was running properly via the CLR Function. However, I now want to make the code run in the current db context without plugging in a connection string. So, I've applied "context connection=true" instead of the explicit db string. When I do this, I am receiving the following error:
A .NET Framework error occurred during execution of user defined routine or aggregate
'MyTestCLRUDF':
System.Data.SqlClient.SqlException: Invalid use of side-effecting or time-dependent operator in 'UPDATE' within a function.
System.Data.SqlClient.SqlException:
etc.
I don't understand why simply swapping the connection string would cause this issue. I assume this is somehow related to permissions, and I am missing something. I've tried using each of the three permission levels (external, safe, and unsafe), and no luck.
Any help is appreciated! Here's the code:
public static bool MyTestCLRUDF(Guid myID)
{
string connectionString = "context connection=true";
using (SqlConnection connection = new SqlConnection(connectionString))
{
SqlCommand command = new SqlCommand("MySprocName", connection);
command.CommandType = CommandType.StoredProcedure;
SqlParameter parameter = new SqlParameter("@ID", myID);
command.Parameters.Add(parameter);
connection.Open();
command.ExecuteNonQuery();
connection.Close();
}
return true;
}
View 6 Replies
View Related
May 8, 2008
Hi all, mister
I want create a function but I get this error: Error Invalid use of side-effecting or time-dependent operator in 'EXECUTE STRING' within a function
I think in a function, cannot use temp tables, or calling exec or store procedures.
Which is the best solution for my issue ? develop store procedure ??
thanks.
CREATE FUNCTION fnObtenerTablaMaestra ()
RETURNS @T Table ( Descripcion VARCHAR(20) NOT NULL, CIF VARCHAR(8) NULL )
AS
BEGIN
DECLARE @cmd nvarchar(max)
DECLARE @sql nvarchar(max)
DECLARE @nexoUNION NVARCHAR(max)
DECLARE @params nvarchar(max)
DECLARE @NombreTabla VARCHAR(MAX)
DECLARE @Descripcion VARCHAR(MAX)
DECLARE @CIF VARCHAR(MAX)
-- Cannot access temporary tables from within a function.
-- IF EXISTS (SELECT TABLE_NAME FROM tempdb.INFORMATION_SCHEMA.TABLES WHERE TABLE_NAME LIKE '#tmpTable%')
-- DROP TABLE #tmpTable
-- CREATE TABLE #tmpTable ( Descripcion VARCHAR(20) NOT NULL, CIF VARCHAR(8) NULL )
SET @nexoUNION = NULL
DECLARE c1 CURSOR for
SELECT [CD_NOMBRE_TABLA], [DS_CAMPO_DESCRIPCION], [DS_CAMPO_CIF] FROM [TABLA_MAESTRA]
OPEN c1
FETCH c1 INTO @NombreTabla, @Descripcion, @CIF
--FETCH NEXT FROM c1 INTO @NombreTabla, @Descripcion, @CIF
WHILE @@FETCH_STATUS >= 0
--WHILE @@FETCH_STATUS = 0
BEGIN
SELECT @sql =
'INSERT INTO #tmpTable
N'''+ @NombreTabla + '''
N'''+ @Descripcion + '''
N'''+ @CIF + ''''
SELECT @sql =
'SELECT ' + @Descripcion + ', '+ @CIF + ' FROM ' + @NombreTabla
IF @nexoUNION IS NULL
BEGIN
SET @nexoUNION = 'UNION'
END
ELSE
SET @sql = @nexoUNION + ' ' + @sql
-- EXECUTE (@sql)
--Exec(@sql)
FETCH c1 INTO @NombreTabla, @Descripcion, @CIF
--FETCH NEXT FROM c1 INTO @NombreTabla, @Descripcion, @CIF
END
CLOSE c1
DEALLOCATE c1
--SET @sql = 'SELECT Descripcion, CIF FROM #tmpTable'
-- Error Invalid use of side-effecting or time-dependent operator in 'EXECUTE STRING' within a function
EXECUTE(@sql)
RETURN
END
GO
View 1 Replies
View Related
May 21, 2015
I'm having trouble with cube processing. While processing a code I'm getting a "Invalid column name MessageType" error.
I unfolded the cube, then I opened "measure groups", my failing dimension (ServiceRequestDim)Â and the partition.
In the partition I opened the "Source" attribute so it now includes my column which was missing. But it didn't solve the issue.
If I get the query used during the process I'm getting this :
SELECT
DISTINCT
[ServiceRequestDim].[MessageType] AS [ServiceRequestDimMessageType0_0]
FROM
(
Select IsNull(IsDeleted, 0) as IsDeleted, [ServiceRequestDimKey], IsNull([Status_ServiceRequestStatusId], 0) as [Status_ServiceRequestStatusId],[Status],IsNull([TemplateId_ServiceRequestTemplateId], 0) as
[Code] ....
In the nested query which defines ServiceRequestDim the messagetype attribute is still missing. In my source datamart the ServiceRequestDim has the "MessageType" column.
So the question is where do I change the nested request that the dim process use to reflect the actual columns in my datamart .
View 4 Replies
View Related
Oct 11, 2007
We have an SSIS package that reads in a tab delimited file and throughs the data into a SQL Server 2005 table. The package worked fine on the test files but when we recieved the production files we are getting the error message:
Invalid data for type "numeric".
Needless to say this is not very discriptive. I ran a trace on the DB durning the call and its doing a bulk insert
BULK INSERT [dbo].[FNIAllAppData]
FROM 'GlobalDTSQLIMPORT 00000000000015b800000000009fbd88'
WITH (DATAFILETYPE = 'DTS_Buffers', CODEPAGE = 'RAW', CHECK_CONSTRAINTS, TABLOCK)
When I changed the Data Flow Destination off to OLE DB Destination the error does not occure and all records are loaded successfully.
Any suggestions or help would be appreciated. Thanks.
View 3 Replies
View Related
Jul 23, 2005
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
May 3, 2006
I have installed the trial enterprise edition of sql server 2005. I am trying to recreate a dts packages. I am using an iseries OLE DB provider. In the data flow the connection to a physical file that has string data gets translated into binary data. Has any one gotten a download to work with the correct data?
View 1 Replies
View Related
Oct 29, 2015
Below doesn't work for varchar column?
select sum(cast(Enter_your_field_name as int)) from Table_name
View 5 Replies
View Related
Apr 16, 2008
Hi,
The table in SQL has column Availability Decimal (8,8)
Code in c# using sqlbulkcopy trying to insert values like 0.0000, 0.9999, 29.999 into the field Availability
we tried the datatype float , but it is converting values to scientific expressions€¦(eg: 8E-05) and the values displayed in reports are scientifc expressions which is not expected
we need to store values as is
Error:
base {System.SystemException} = {"The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column."}
"System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.InvalidOperationException: The given value of type SqlDecimal from the data source cannot be converted to type decimal of the specified target column. ---> System.ArgumentException: Parameter value '1.0000' is out of range.
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
--- End of inner exception stack trace ---
at System.Data.SqlClient.SqlBulkCopy.ConvertValue(Object value, _SqlMetaData metadata)
at System.Data.SqlClient.SqlBulkCopy.WriteToServerInternal()
at System.Data.SqlClient.SqlBulkCopy.WriteRowSourceToServer(Int32 columnCount)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table, DataRowState rowState)
at System.Data.SqlClient.SqlBulkCopy.WriteToServer(DataTable table)
at MS.Internal.MS
COM.AggregateRealTimeDataToSQL.SqlHelper.InsertDataIntoAppServerAvailPerMinute(String data, String appName, Int32 dateID, Int32 timeID) in C:\VSTS\MXPS Shared Services\RealTimeMonitoring\AggregateRealTimeDataToSQL\SQLHelper.cs:line 269"
Code in C#
SqlBulkCopy bulkCopy = new SqlBulkCopy(sqlConnection, SqlBulkCopyOptions.Default);
DataRow dr;
DataTable dt = new DataTable();
DataColumn dc;
try
{
dc = dt.Columns.Add("Availability", typeof(decimal));
€¦.
dr["Availability"] = Convert.ToDecimal(s[2]); ------ I tried SqlDecimal
€¦€¦€¦.
}
bulkCopy.DestinationTableName = "dbo.[Tbl_Fact_App_Server_AvailPerMinute]";
bulkCopy.WriteToServer(dt);
thx
View 8 Replies
View Related
Jan 3, 2006
Hi, i have a table in sqlexpress named Contacts:
ID (int) -primary key-
name (varchar(30))
lastname (varchar(30))
phone (varchar(15))
fax (varchar(15))
desc (text)
In my default.aspx page, i have a GridView that has the conecction to this table. The GridView has the Editing and Deleting checkbox enabled but my problem is that i can't edit or delete any row when the page is running and the massage is this: "The data types text and nvarchar are incompatible in the equal to operator"
It would have to work, but i don't know what happen, Please, any help!
View 8 Replies
View Related
May 22, 2015
Im reading in a CSV wiht double quote text delimiters. Data came from mySQL.
One column in mySql is text(65535) which is equivalent to varchar(max) as far as i understand.
This particular column can be blank, not null, just blank. If its blank i want to put in a value so i added a Derived column shape and added the following formula:
LEN(my_Column) < 1 ? Â "" : Â (DT_TEXT)my_Column
I get the below error from this expression:
 The data types "DT_WSTR" and "DT_TEXT" are incompatible for the conditional operator. The operand types cannot be implicitly cast into compatible types for the conditional operation. To perform this operation, one or both operands need to be explicitly cast with a cast operator.
I have tried this without casting but still get an error. As I have configured the column in the flatfile connector as DT_TEXT, im not sure where its getting DT_STR from.
View 5 Replies
View Related
Jan 28, 2008
update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
View 5 Replies
View Related
Jan 25, 2013
Where did i do wrong in conversion
original query
dateadd(hour, datediff(hour,CONVERT(VARCHAR(19),B.CreateDate,111 ),B.CreateDate)
I tried to use convert(varchar(50),Datediff,21)
Below is the exact code..
convert(varchar(50),dateadd(hour, datediff(hour,CONVERT(VARCHAR(19),B.CreateDate,111 ),B.CreateDate),21)
View 10 Replies
View Related
May 14, 2008
Hi There,
Could someone please tell me why I am getting the above error on this code:
select (replace
(replace
(replace
(replace (serviceType, 'null', ' ')
, '<values><value>', ' ')
, '</value><value>', ',')
, '</value></values>', ' '))
from credit
serviceType (text,null)
Thanks,
Rhonda
View 1 Replies
View Related
Oct 19, 2006
I am trying to put the data from a field in my database into a row in a table using the SQLDataSource.Select statement. I am using the following code: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'" myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)But when I run the code, I get the following error:Server Error in '/YorZap' Application. Unable to cast object of type 'System.Data.DataView' to type 'System.String'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.Source Error: Line 54: FileBase.SelectCommand = "SELECT Username FROM Files WHERE Filename = '" & myFileInfo.FullName & "'"
Line 55: 'myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments).GetEnumerator.Current, String)
Line 56: myDataRow("Username") = CType(FileBase.Select(New DataSourceSelectArguments()), String)
Line 57:
Line 58: filesTable.Rows.Add(myDataRow)Source File: D:YorZapdir_list_sort.aspx Line: 56 Stack Trace: [InvalidCastException: Unable to cast object of type 'System.Data.DataView' to type 'System.String'.]
ASP.dir_list_sort_aspx.BindFileDataToGrid(String strSortField) in D:YorZapdir_list_sort.aspx:56
ASP.dir_list_sort_aspx.Page_Load(Object sender, EventArgs e) in D:YorZapdir_list_sort.aspx:7
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +13
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +45
System.Web.UI.Control.OnLoad(EventArgs e) +80
System.Web.UI.Control.LoadRecursive() +49
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3743
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.210 Please help me!
View 3 Replies
View Related
Jan 3, 2008
I am getting this error even though there should be data present. When I test the SQL statement in query analyzer, it returns 1 row.
<%@ Import Namespace="System.Data.SqlClient" %><%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Blog" %>
<script runat="server">Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs)
Dim strConnection As String = System.Configuration.ConfigurationManager.ConnectionStrings("currentConnection").ToString 'currentConnection is defined in web.config and works when used in other pages on the siteDim dbConn As SqlConnection = New SqlConnection(strConnection)
dbConn.Open()
Dim strSelectCommandFirstEntry As String = "SELECT MAX(blogEntryId) as maxID FROM site_Blog"Dim cmdFirstEntry As SqlCommand = New SqlCommand(strSelectCommandFirstEntry, dbConn)Dim rdrFirstEntryData As SqlDataReader = cmdFirstEntry.ExecuteReader()Dim strFirstEntryData As Int32 = rdrFirstEntryData(0) 'error occurs here, i have also tried rdrFirstEntryData("maxID") with same errorrdrFirstEntryData.Close()dbConn.Close()
</script>
When debugging this code and stopping on this line:
Dim strFirstEntryData As Int32 = rdrFirstEntryData(0)
rdrFirstEntryData has the following values:hasRows = True, FieldCount=1, Item=In order to evaluate an indexed property, the property must be qualified and the arguments must be explicitly supplied by the user. and when i click the refresh button...Item = Overload resolution failed because no accessible 'Item' accepts this number of arguments.
I suspect that the note for "Item" is my clue to the source of the problem, but I don't know what it means. Please, help.
View 2 Replies
View Related
Apr 25, 2006
I get this error:
The data types text and text are incompatible in the equal to operator.
when trying to execute this query
SELECT id FROM users WHERE username=@userName
Any Ideas?
View 3 Replies
View Related
Mar 22, 2007
$exception {"Arithmetic overflow error converting expression to data type smalldatetime.
The statement has been terminated."} System.Exception {System.Data.SqlClient.SqlException}
occurs
here is my code
protected void EmailSubmitBtn_Click(object sender, EventArgs e)
{
SqlDataSource NewsletterSqlDataSource = new SqlDataSource();
NewsletterSqlDataSource.ConnectionString = ConfigurationManager.ConnectionStrings["NewsletterConnectionString"].ToString();
//Text version
NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.Text;
NewsletterSqlDataSource.InsertCommand = "INSERT INTO NewsLetter (EmailAddress, IPAddress, DateTimeStamp) VALUES (@EmailAddress, @IPAddress, @DateTimeStamp)";
//storeprocedure version
//NewsletterSqlDataSource.InsertCommandType = SqlDataSourceCommandType.StoredProcedure;
//NewsletterSqlDataSource.InsertCommand = "EmailInsert";
NewsletterSqlDataSource.InsertParameters.Add("EmailAddress", EmailTb.Text);
NewsletterSqlDataSource.InsertParameters.Add("IPAddress", Request.UserHostAddress.ToString());
NewsletterSqlDataSource.InsertParameters.Add("DateTimeStamp", DateTime.Now.ToString());
int rowsAffected = 0;
try
{
rowsAffected = NewsletterSqlDataSource.Insert();
}
catch (Exception ex)
{
Server.Transfer("NewsletterProblem.aspx");
}
finally
{
NewsletterSqlDataSource = null;
}
if (rowsAffected != 1)
{
Server.Transfer("NewsletterProblem.aspx");
}
else
{
Server.Transfer("NewsletterSuccess.aspx");
}
View 3 Replies
View Related
Jan 21, 2006
Dear guys
when am executing a stored procedure from asp page it will shows an err like this
"
Microsoft OLE DB Provider for SQL Server error '80040e30'
Type name is invalid
"
but the script and the database is perfectly working in local computer ..
what will be the reason.
regards jini
View 2 Replies
View Related
Apr 20, 2007
Hi, all
I'm getting this error at runtime when my page tries to populate a datagrid. Here's the relevant code.
First, the user selects his choice from a dropdownlist, populated with a sqldatasource control on the aspx side:<asp:SqlDataSource ID="sqlDataSourceCompany" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT [PayrollCompanyID], [DisplayName] FROM [rsrc_PayrollCompany] ORDER BY [DisplayName]">
</asp:SqlDataSource>
And the dropdown list's code:<asp:DropDownList ID="ddlPayrollCompany" runat="server" AutoPostBack="True" DataSourceID="sqlDataSourcePayrollCompany"
DataTextField="DisplayName" DataValueField="PayrollCompanyID">
</asp:DropDownList>
Then, I use the selectedindexchanged event to bind the data to the datagrid. Here's that code:
1 Sub BindData()
2
3 Dim ds As New DataSet
4 Dim sda As SqlClient.SqlDataAdapter
5 Dim strSQL As String
6 Dim strCon As String
7
8 strSQL = "SELECT [SocialSecurityNumber], [Prefix], [FirstName], [LastName], [HireDate], [PayrollCostPercent], " & _
9 "[Phone], [BadgeNumber], [IsSupervisor], [SupervisorID], [IsUser], [IsScout] FROM [rsrc_Personnel] " & _
10 "WHERE ([PayrollCompanyID] = @PayrollCompanyID)"
11
12 strCon = "Data Source=DATASOURCE;Initial Catalog=DATABASE;User ID=USERID;Password=PASSWORD"
13
14 sda = New SqlClient.SqlDataAdapter(strSQL, strCon)
15
16 sda.SelectCommand.Parameters.Add(New SqlClient.SqlParameter("@PayrollCompanyID", Me.ddlPayrollCompany.SelectedItem.ToString()))
17
18 sda.Fill(ds, "rsrc_Personnel")
19
20 dgPersonnel.DataSource = ds.Tables("rsrc_Personnel")
21 dgPersonnel.DataBind()
22
23 End Sub
24
I'm assuming my problem lies in line 16 of the above code. I've tried SelectedItemIndex, SelectedItemValue too and get errors for those, as well.
What am I missing?
Thanks for anyone's help!
Cappela07
View 2 Replies
View Related
Feb 12, 2005
I am trying to create a page that adds users to a MS SQL database. In doing so, I have run into a couple errors that I can't seem to get past. I am hoping that I could get some assistance with them.
Error from SQL Debug:
---
Server: Msg 295, Level 16, State 3, Procedure AdminAddUser, Line 65
[Microsoft][ODBC SQL Server Driver][SQL Server]Syntax error converting character string to smalldatetime data type.
---
Error from page execution:
---
Exception Details: System.Data.OleDb.OleDbException: Error converting data type varchar to numeric.
Source Error:
Line 77: cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
Line 78:
Line 79: cmd.ExecuteNonQuery()
---
Below is what I currently have for my stored procedure and the pertinent code from the page itself.
Stored Procedure:
---
CREATE PROCEDURE dbo.AdminAddUser( @username varchar(100),
@password varchar(100),
@email varchar(100),
@acct_type varchar(100),
@realname varchar(100),
@billname varchar(100),
@addr1 varchar(100),
@addr2 varchar(100),
@city varchar(100),
@state varchar(100),
@country varchar(100),
@zip varchar(100),
@memo varchar(100) )
AS
BEGIN TRAN
--
-- Returns 1 if successful
-- 2 if username already exists
-- 0 if there was an error adding the user
--
SET NOCOUNT ON
DECLARE @error int, @rowcount int
--
-- Make sure that there isn't already a user with this username
--
SELECT userID
FROM users
WHERE username=@username
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount > 0 BEGIN
ROLLBACK TRAN
RETURN 2
END
--
-- Set expiration date
--
DECLARE @expDate AS smalldatetime
IF @acct_type = "new_1yr" BEGIN
SET @expDate = DATEADD( yyyy, 1, GETDATE() )
END
IF @acct_type = "new_life" BEGIN
SET @expDate = DATEADD( yyyy, 40, GETDATE() )
END
DECLARE @paidCopies AS decimal
SET @paidCopies = 5
--
-- Add this user to the database
--
IF @acct_type <> "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userPaidCopies, userExpirationDate, userLastPaidDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@paidCopies, @expDate, GETDATE(), @addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
IF @acct_type = "new" BEGIN
INSERT INTO users (userName, userPassword, userEmail, userJoinDate,
userBname, userRealName, userAddr1, userAddr2, userCity,
userState, userCountry, userZip, userMemo )
VALUES (@username, @password, @email, GETDATE(), @realname, @billname,
@addr1, @addr2, @city, @state, @country, @zip, @memo )
SELECT @error = @@ERROR, @rowcount = @@ROWCOUNT
IF @error <> 0 OR @rowcount < 1 BEGIN
ROLLBACK TRAN
RETURN 0
END
END
COMMIT TRAN
RETURN 1
GO
---
Page Code:
---
Sub AddUser(Sender as Object, e as EventArgs)
Dim db_conn_str As String
Dim db_conn As OleDbConnection
Dim resultAs Int32
Dim cmdAs OleDbCommand
db_conn_str = "Provider=SQLOLEDB;Data Source=localhost;Initial Catalog=xxxxx; User ID=xxxxx; PWD=xxxxx;"
db_conn = New OleDbConnection( db_conn_str )
db_conn.Open()
cmd = new OleDbCommand( "AdminAddUser", db_conn )
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add( "result", OleDbType.Integer ).Direction = ParameterDirection.ReturnValue
cmd.Parameters.Add( "@username", OleDbType.VarChar, 100 ).Value = Request.Form("userName")
cmd.Parameters.Add( "@password", OleDbType.VarChar, 100 ).Value = Request.Form("userPass")
cmd.Parameters.Add( "@email", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@acct_type", OleDbType.VarChar, 100 ).Value = Request.Form("userEmail")
cmd.Parameters.Add( "@realname", OleDbType.VarChar, 100 ).Value = Request.Form("userRealName")
cmd.Parameters.Add( "@billname", OleDbType.VarChar, 100 ).Value = Request.Form("userBname")
cmd.Parameters.Add( "@addr1", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr1")
cmd.Parameters.Add( "@addr2", OleDbType.VarChar, 100 ).Value = Request.Form("userAddr2")
cmd.Parameters.Add( "@city", OleDbType.VarChar, 100 ).Value = Request.Form("userCity")
cmd.Parameters.Add( "@state", OleDbType.VarChar, 100 ).Value = Request.Form("userState")
cmd.Parameters.Add( "@country", OleDbType.VarChar, 100 ).Value = Request.Form("userCountry")
cmd.Parameters.Add( "@memo", OleDbType.VarChar, 100 ).Value = Request.Form("userMemo")
cmd.Parameters.Add( "@zip", OleDbType.VarChar, 100 ).Value = Request.Form("userZip")
cmd.ExecuteNonQuery()
(...)
---
View 1 Replies
View Related
Jul 24, 2015
When I execute the below stored procedure I get the error that "Arithmetic overflow error converting expression to data type int".
USE [FileSharing]
GO
/****** Object: StoredProcedure [dbo].[xlaAFSsp_reports] Script Date: 24.07.2015 17:04:10 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
[Code] .....
Msg 8115, Level 16, State 2, Procedure xlaAFSsp_reports, Line 25
Arithmetic overflow error converting expression to data type int.
The statement has been terminated.
(1 row(s) affected)
View 10 Replies
View Related
Aug 31, 2004
Hi There,
I'm using C# to get a value for a DOUBLE precision variable, called "Length", from a textBox using the following line:
Length = Convert.ToDouble( txtLength.Text )
I'm also using the following lines to prepare my stored procedure call:
arParms[9] = new SqlParameter("@Length", SqlDbType.Decimal, 5);
arParms[9].Value = record.Length;
My stored procedure has the following parameter definition:
@Length decimal(9,3)
My problem is that if someone types a value bigger than 999999 in the textbox he will get for sure the following error:
System.Data.SqlClient.SqlException: Error converting data type numeric to decimal.
I don't know how to either make sql or C# to truncate the value or catch the exception to automatically assign 0 to the parameter.
Please Help.
Moshe
View 1 Replies
View Related
Aug 31, 2006
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
View 3 Replies
View Related
