I'm converting a package from DTS to IS. My manager does not want to spend the time re-writing it to make use of the Script task so that's why I'm using a DTS 2000 task which contains some ActiveX.
The tasks themselves run fine when I'm in the designer and click the run button, but when part of the entire package it fails. I search on the error message and nothing comes up.
This is the error message:
Error: System.Runtime.InteropServices.COMException (0x8004043B): Exception from HRESULT: 0x8004043B at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread()
I've set them to run on the main thread but that doesn't seem to help.
I am running a package on a 64-bit server using the 32-bit dtexec. It contains an embedded Execute DTS 2000 package. I deployed the package to the server using the sa account. I set up a SQL Agent job that runs under an account that should have complete admin privileges. The network guys tell me that Legacy components have been installed (although I believe that shouldn't be necessary because SSIS is installed). This is SQL Server 2005, SP2.
When I execute this job, I receive this error message:
Executed as user: Domainuser. ...age Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:13:18 AM Error: 2007-12-17 11:13:35.65 Code: 0xC0010018 Source: Execute DTS 2000 Package Task Description: Error loading a task. The contact information for the task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails. End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0010026 Source: Execute DTS 2000 Package Task Description: The task has failed to load. The contact information for this task is "Execute DTS 2000 Package Task;Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". End Error Error: 2007-12-17 11:13:35.71 Code: 0xC0024. The step failed.
I have a "Execute DTS Package 2000 " task in SSIS. The SQL 2000 DTS has one task which precedence is "completion". Using SQL2000 it works properly, but when I invoke it from SSIS it doesn€™t respect the precedence. So, when the task above fails it ends the DTS execution.
Is it possible to configure the task to respect the precedences?
For first time I'm testing this task and surprisingly, when I try "Edit Package" option:
1)The DTS host failed to load or save the package properly 2)The selected package cannot be opened 3)Error HRESULT E_FAIL has been returned from a call to a COM component
But after these messages you can see all the tasks but they haven't name!!
It seem as if RCW mechanism has failed between managed and unmanaged coded-partially.
I don't dare to follow doing more stuff, I don't know if that package is well-loaded or not from there. ?¿
I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :
Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".
So this confused me, any one has any experience on this?
I have imported a series of SQL 2000 DTS packages to our 64bit AMD SQL 2005 server. I then created SSIS pkgs to run each SQL 2000 package using the Execute DTS 2000 package task. Then I deployed these packages to the Yukon server as well.
I can run these packages when launching them via Integration Services from Management Studio on my workstation, but when I try to run them via a SQL Job or the DTExec command on the server, I get this error. Anyone know of a workaround?
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,0,0x,This task does not support native Win64 environment. Please run the package in 32-bit WOW environment instead.
OnError,xxxxxx,xxxxxxx,Execute DTS 2000 Package Task,{94769783-575C-4D1E-90F6-C2BDB3EA3CE2},{E05551C1-CDDE-40E3-87B4-C65D4E1B3A53},4/26/2006 3:01:37 PM,4/26/2006 3:01:37 PM,-1073594105,0x,There were errors during task validation.
Is the DTS 2000 Package Task not supported on Win64?
I have installed the SQL Server 2000 DTS components from the November feature pack on both my workstation and the server.
Hi, I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties Result Set : None
ConnectionType : OLEDB Connection : Connected to a Local Database (DB1) SQLSourceType : Direct Input SQL Statement : exec(?) IsQueryStorePro : False BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
hello I have a problem with Sql task when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue." I'm using ODBC connexion for a csv file
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
I have a For Loop Container which has Execute SQL Task. The following SQL is not working in it.
Input Parameters: Batch_ID, Class_ID both of type long in the parameter mapping dialog.
The result set is of type 'One Row' and direction is input
Result set is: NextBatchID------>User::MinBatch_ID of type int
NextClassID------->User::MinClass_ID of type int
The query is giving very generic error
[Execute SQL Task] Error: Executing the query "" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Code Snippet
DECLARE @ClassID int DECLARE @BatchID int SET @BatchID = ? SET @ClassID = ? SELECT MAX(T.Batch_ID) AS NextBatch_ID, MAX(T.Class_ID) AS NextClass_ID FROM (Select TOP (10) BD.Batch_ID, BD.Class_ID, ROW_NUMBER() OVER(ORDER BY Batch_ID, Class_ID)AS RowNum From dbo.Batch_Data As BD WHERE (BD.Batch_ID > @BatchID) OR (BD.Batch_ID = @BatchID AND BD.Class > @ClassID) ORDER BY Batch_ID, Class_ID) T WHERE T.RowNum = 10
When I hardcode values the query works. With parameters it fails.
I get the following error when trying to execute an sql statement in oracle and returning the results into an object variable with the execute sql task.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "select <columnlist> from <tablename>" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It executes fine if I select no results or first row but I can't get full result set to work. The query and connection string are valid. Any ideas?
I am using an execute sql task as the last step in an SSIS package. The task has an insert statement in it that will be appending some transformed data to the end of a large table in our database.
All tasks are executing correctly except for this last one. It is giving me the following error that I cannot puzzle out:
Error: 0xC002F210 at LINPRM_Append, Execute SQL Task: Executing the query
"INSERT INTO LINPRM
SELECT * FROM LINPRM_Append"
failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: LINPRM_Append
Does anyone have any ideas on how I might get past this error?
I am getting the following error message while trying to run a Execute SQL task with Variables in BIDS. My connection type is ADO.NET . My Variables defined are
Varout and Varin. Both are String type Variables. @varout has a value set to "Category" and @varin has a value set to "Test Category". I am using the expression
" Select * into " + @[User::VarOut] + " FROM " + @[User::Varin]
The expression eveluates correctly. The error I get when i run the package is:
Package Validation Error. Failed to lock Variable "Select * into TestCategory from category" for read access with error 0XC0010001. The Variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variables collection on a container during the execution of package and the variable is not there. The Variable name may have changed or the Variable is not being created.
Can anyone please tell me what I am doing wrong or where do I need to look at?.
I am trying to execute a Stored Procedure using an Execute SQL Task. my stored proc contains various input paramaters. And the datatype for some of the paramaters are numeric (decimal). So when I am passing values to those paramaters using Exec SQL Task, I have used variables of type Object as it is not working properly even if I declare the variable type as "double". So I have used Object datatype for those variables and it worked properly.
But suddenly from yesterday onwards I am getting an error message (find below).
[Execute SQL Task] Error: Executing the query "USP_InsertData" failed with the following error: "Failed to convert parameter value from a Object to a Double.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
If any one have idea on this, please let me know to rectify this error.
I'm creating an SSIS package that will execute legacy dts packages. The package to be executed is decided at runtime using a sql query task.
Executing a dts package statically works fine, but when I try to set the details of the dts to be run via expressions, I get the error below.
To make it dynamic, I created a variable of type string, and put the package name in here. I also have a string variable for the packageid. Then I set up an expression on the Execute DTS 2000 Package Task that sets the PackageName & PackageID property to this variable.
The PackageId is a string variable I've retrieved using:
select top 1 name, cast(id AS varchar(50)) id, cast(versionid AS varchar(50)) versionid from sysdtspackages where name = @PackageName order by createdate desc
When I use the task to set the package id it works find (by selecting a dts, then changing the name), but when I try to provide the package id I get this message:
but the method signature specifies String PackageGuid, and it is a string..
any ideas??
i tried casting the variable like so:
(DT_GUID) @[User:TSPkgId], as the versionid is a uniqueidentifier on sysdtspackages.. It didn't like that at all (can't cast from type DT_WSTR to DT_GUID error code 0xC00470C2)
I have a package A which has execute package task which tryes to execute package B. I am able to execute package B directly but when i execut epackage A.Its able to open package B but its failing at the very first task in B.The error iam getting is like this Error: The task "Setup Connections" cannot run on this edition of Integration Services. It requires a higher level edition.
now it is throwing the below mentioned error: SSIS package "DNB_GMS_PO_Transition.dtsx" starting. Error: 0xC0202009 at DNB_GMS_PO_Transition, Connection manager "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod": An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'cedprod'.". Error: 0xC00291EC at Taking backup of the affected tables, Execute SQL Task: Failed to acquire connection "CTSINNVLSDNB1SQLEXPRESS.cedprod.cedprod". Connection may not be configured correctly or you may not have the right permissions on this connection. Task failed: Taking backup of the affected tables Warning: 0x80019002 at DNB_GMS_PO_Transition: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. SSIS package "DNB_GMS_PO_Transition.dtsx" finished: Failure.
i was unable to figure it out.but i had connected correctly to Database.
if i run those queries in the Query analyser with the same DB connection its running fine.
My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?
Here is the query that I am using...
DECLARE @Server [nchar] (100) SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))
INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName) SELECT @Server, role.name, member.name FROM sys.server_role_members rm inner join sys.server_principals member ON rm.member_principal_id = member.principal_id inner join sys.server_principals role ON rm.role_principal_id = role.principal_id
********Begin Errors*************** " failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Task failed: Execute SQL Task I Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'. Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
I am getting the following error when I try to double click on an Execute Sql Task to open it using VS2005:
=================================== Cannot show the editor for this task. (Microsoft Visual Studio) =================================== Method 'get_ParameterSize' in type 'GridRow' from assembly 'Microsoft.SqlServer.SQLTaskUI, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' does not have an implementation. (Microsoft.SqlServer.SQLTaskUI)
Hi All, I have strange problem. I have a package task that is setup to run a package from a file source. The package ran fine originally but VS placed a shared drive letter for the path. I went back to change it to a UNC path and now the package fails and gives an error saying the connection is not valid and that it failed validation. Going back into the connection manager to check the path and it looks good, even pressing the Browse button shows the correct directory.
I am using the Execute SQL Task to call a sproc which I am not in the design stream for, so I can call it but I cannot change it. I need to deal with the issue of handling an error from a call to this sproc- the stored procedure does not return any output variables nor a return value that I can nail, all I get is a failure in the task. The sproc itself is just a straightforward insert into a table which can fail for any of the obvious reasons (PK violation, bad data, null data et al). The point is I want to know which rows failed in the insert (moving data from one databases table to another one row at a time wiith the sproc being inside a loop task over a recordset variable populated via a data flow call to a SELECT statement) so that I can flag then as such so that when I am finished in my loop I am left with a bunch of rows that did not make the trip from database A to databases B - within the loop, for each row that the sproc call is successfull, will hjave another sproc follow it to delete it from the original, but I cannot get this far when my INSERT sproc call fails. I have tried changing the MaxErrorCount to a big number - ceratinly more than I need but it does not seem to matter .lCan you help me out here - or is the design flawed anyway?
I have a Script task which generates a GUID and stores it in the variable @[User::AttachmentListId], which is of type System.Object since Guid wasn't an option. Following this is an Execute SQL task (with an OLE DB connection to an SQL Server 2000 database) whose SQL statement is
EXEC AddAttachmentListItem ?, ?, 0
My parameter mapping looks like this (variable name, direction, data type, parameter name, parameter size):
@[User::AttachmentListId], Input, GUID, 0, -1
@[User::AFilePath], Input, VARCHAR, 1, 260
When I execute my package I get the following error:
[Execute SQL Task] Error: Executing the query "EXEC AddAttachmentListItem ?, ?, 0" failed with the following error: "The type is not supported.DBTYPE_GUID". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
This worked earlier when the first parameter was an int and not a uniqueidentifier, but I reworked my design because the GUID was a better choice for what I was doing. Well, at least 'til I got to this point....
We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)
I am having trouble running a package in SQL Agent. The step involves zipping up a number of files using SQL Agent. I know in the error message it states "Access is denied" but I can run the package manually in BIS. Also I have applied a SQL proxy to the step using my own credentials which have rights to the file location, but still no luck.
I get the following error:
Error: 2008-03-10 09:04:02.04 Code: 0xC002F304 Source: Call ZipFiles Batch Execute Process Task Description: An error occurred with the following error message: "Access is denied". End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 09:04:00 Finished: 09:04:02 Elapsed: 1.219 seconds. The package execution failed. The step failed.,00:00:02,0,0,,,,0
I am getting the following error when I execute my sql task:
An error occurred while assigning a value to variable "NullVar": " NO result rowset is associated with the execution of this query. "
I am executing a SP that has one input & one output parameter. The output parameter is returning a single row for debugging if the sp failes. I tried using Jamie's method:(http://blogs.conchango.com/jamiethomson/archive/2005/12/09/2480.aspx) to get it to work but keep getting the above error. I have the following variables:
In the execute sql task, I set the ResultSet to single row. I set SQLSourceType = variable & sourcevariable = user::SqlSource. In the result tab, I added a result set, NewResultName with the variable user::NullVar. I tried different configurations with the parameter mappings but nothing seemed to work. I didn't know if i still had to use this if I am using the sqlSource variable to drive the task.
So I am not sure what I am missing here. Anyone have any suggestions?
In Execute SQL Task, I'm facing following error when Result Set assigns value to the global variable.
SSIS package "Package.dtsx" starting.Error: 0xC002F309 at Execute SQL Task, Execute SQL Task: An error occurred while assigning a value to variable "IDCount": "Value does not fall within the expected range.".Task failed: Execute SQL TaskWarning: 0x80019002 at Package: The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.SSIS package "Package.dtsx" finished: Failure.
My SQL statement is "Select count(*) as AliasNm from <TableName>" and my Result Set type is Single Row.
I mentioned in the Result Set's Result Name as AliasNm.
I am getting an error message (mentioned below) in the variable mapping of Execute SQL Task in SSIS.
" Error: ForEach Variable Mapping number 9 to variable "User::Value" cannot be applied. "
" Error: The type of the value being assigned to variable "User::Value" differs from the current variable type. Variables may not change type during execution. Variable types are strict, except for variables of type Object. "
Pls anyone have a look and give me a solution asap.
