We are using SQL Server 2005 mirroring with the witness server.
In most cases whenever a failover was triggered we saw it happen in a matter
of a few seconds. However, the last time it took about 15 minutes - we suspect
due to Connection being blocked.
Would appreciate any information on what could cause this?
We have 2 databases that run on the server.
We are having problems getting the ADO.NET client to failover in a timely manner in a web application. Here's what happens:
1) Database fails over in 3 to 5 seconds
2) Clients attempt to login to primary and receive SQL server not available errors
3) The clients slowly start to connect and succeed without errorson the secondary.
4) We are still see SQL Server login errors on the primary, even after the failover
5) When we failback to the primary, it all happens within a few seconds (no problems)
If we recycle IIS, this problem goes away
Here's what we have tried
1) Turning off connection pooling (has no effect). We also can see the connections get killed on the primary server
2) Applying this hotfix (http://support.microsoft.com/kb/944099)
And yes, we are running a script to sync up the SIDS so that doesn't appear to be a problem. What seems to be happening is the primary server is getting stuck in the ADO.NET application memory. The problem is we don't know how to fix it.
BTW, our hardware is SQL Server 2005, Windows Server 2003, .NET 2.0 (and .NET 3.5)
Let me know if you need additional information. Thanks in advance
The database is about 5 Gb and the transaction log is about 13 M
and it takes 11 hours to do a full back up.
I am not sure why it takes that long? Is there any thing I can check?
IT is SQL v7.
Thank you
Hi all,
I have a stored procedure that is called from a VB.NET application that takes an enormously long time to execute. In the QA it only takes 10sec but in the application it takes ages. The stored procedure is as follows:
PROCEDURE NAME IS SPTOPTWENTYUSERS
SELECT TOP 20 STRUSERNAME,SUM(INTBYTESRECVD) AS INTDOWNLOAD FROM TBLISAWEBLOGS
WHERE DTELOGDATE BETWEEN @BEGINDATE AND @ENDDATE
GROUP BY STRUSERNAME
ORDER BY INTDOWNLOAD DESC
The code that runs it is as follows:
sSQLString = SPTOPTWENTYUSERS
Using cnn As New SqlConnection(GetPath)
Try
Dim cmd As New SqlCommand(sSQLString, cnn)
Dim dr As SqlDataReader
With cmd
.CommandType = CommandType.StoredProcedure
.CommandTimeout = 0
.Parameters.Add("@BEGINDATE", SqlDbType.DateTime)
.Parameters.Add("@ENDDATE", SqlDbType.DateTime)
.Parameters("@BEGINDATE").Value = dtpStartDate.Value
.Parameters("@ENDDATE").Value = dtpEndDate.Value
End With
cnn.Open()
dr = cmd.ExecuteReader
Any help on why this happens would be much appreciated.
thanks
Hi,
How much time will it take to restore a DB 300MB long in SQL Server 2005 Express?
Full Restore with recovery option?
The thing is that I made a restore process and its been running for about an hour now.
When I open the Management Studio on the database folder it shows "Restoring..."
Is this normal?
Tnx
We have set up Mirroring with a witness server and everything works fine when we failover from the SQL Management console.
However, if we failover when our Maccola client is connected, the client blows up - clearly because it can no longer connect to the database.
The ODBC DSN used by the Maccola client shows a checkbox for the 'select a failover server' but the checkbox is grayed out.
Also the summary of settings for the DSN at the end of the wizard reveals that the failover to server (y/N) option is set to N.
The default setting for this DSN is 'populate the remaining values by querying the server' but it doesn't appear to be getting the settings for failover from the server or any other interactive DSN settings either. The server is clearly set for mirroring.
Another suspicious item is that the DSN cannot connect to the server with SA permissions, even though the server is set to mixed security and we use the correct authentication.
Is it possible that the client MACHINE is not authenticating with the domain or sql server properly. We are logged into the client with the domain account that is the SQL admin account on the sql server box.
We should be able to interact with the sql server settings through the ODBC DSN on the client shoulnd't we?
Are we missing a service pack on the client?
Thanks,
Kimball
Recently my system encounter some problem when retrieving certain record from MSSQL.
For an example i have a database which contains 1.5 million of members. so i have a perl scripts that will execute to query based on certain range.
the schedule like below:
1 script - 1-250k (Query finish less than 5 mins)
<interval 5 mins>
1 script - 250k-500k (Query finish less than 5 mins)
<interval 5 mins>
1 script - 500k-750k (Query finish less than 5 mins)
<interval 5 mins>
1 script - 750k-1M (Query finish in 1++ hours)
<interval 5 mins>
1 script - 1M-1.25M (Query finish in 1++ hours)
<interval 5 mins>
1 script - 1.25M-1.50M (Query finish in 1++ hours)
END
After the 4th query, the query seems to work very slow, and this problem only raise on windows 2003 with mssql 2005, current server that run smoothly is win2k with mssql2000.
anyone have any idea on this problem either cause by operating system and database or related to something else?
Hi all,I would like to perform anINSERT INTO LINKEDSVR.dbo.xyz.abcSELECT ... FROM dbo.dfgwhere LINKEDSVR is a linked server on another machine. Both servers arerunning SQLServer 2000 and have the DTC running.When I run this batch from QueryAnalyzer without explicitly usingtransactions, it works well (takes about 5 sec) - however, when Ienclose it usingbegin [distributed] tran/commit tranthe query runs forever.I also tried to use the local server as linked server (loopback) but itdid not work either.Any suggestions?Thanks,Jo
View 2 Replies View RelatedHi,I've a strange problem with a INSERT query. It's taking a long time toexecute. The format is like this :INSERT INTO table1SELECT ..FROM table2Executing the SELECT .. FROM table2 is taking 30 seconds. The resultis nothing: no records are selected.When i include the INSERT part it will take 12 hours to completeINSERT INTO table1SELECT ..FROM table2There's is an index on the table and when i delete it, it gives stillthe problem.Keh?Greetz,Hennie
View 1 Replies View RelatedHi there,I've a table with 18 millions of recordes shaped like this :Code nvarchar(80) , State int , school int , class int , Term nvarchar(80)The following query takes too long to run ( more than 2 hours )select State , school , class , term , count (term) as freqGroup by state , school , class , termHow may I speed up the query?My Pc is PIV (3.6 GHz) Intell , Win2003 Server , 512 MB of RAM, 80 GB of HDRegards,M.Mansoorizadeh
View 6 Replies View RelatedHi,
It seems inserting records takes a relatively long time. My guess is it needs time to allocate disk space for the extra space needed. Assuming this is true, are there any DB settings that allow auto space allocation in bigger chunk? I am looking for something like "DB growth factor" or " Table growth factor"
Thanks for any info.
Dear friends,
Our package which at the time of normal execution takes 2-2:30 mins for fetching data on VPN with some select queries. But some times its job runs for hours and hours. What could be the exact reason behind it? I guess its queries are stuch somewhere, but not when we run from the BIDS or run the job manually.
Please help. Thanks.
Hello,
i've got a table where a single DELETE query takes about 6 seconds.
The table has about 25 cols and 5 constraints (1PK, 4 FK). No triggers no cascade.
What can be the reason and what can i do to accelerate?
Thanks
[Edit]
- MS SQL Server 2000
- Running on LOCAL, 2.99 GHz Pentium
Hello,
I seem to be misunderstanding the way transactions work with service broker queues. We have developed and deployed a service broker application that 5 queues and a windows service for each queue on multiple servers (3 currently). Due to a last minute issue, we had to not use transactions when the services executed a recieve and I am not updating the code base to use transactions and am running into blocking issues. One of the services runs for 90 seconds (spooling to the printer) and all of the servers block on the receive operation for this queue. I thought that if I was receving messages from a single conversation, other receives against this queue would not block.
Thanks,
Jim Stallings
Hello All.
I tried to test Rebuildm.exe on my local server
1. Stoped Sql
2. Renamed master.mdf to master.mdf_old
3. Tried to start Sql (Does start of couse)
4. Run Rebuildm.exe ... and "Gonfigurating Sql server" message goes forever (I was waiting 1 1/2 hrs ... progress bar was running )
Do I miss some some steps ?
Tnanks
I have a database with 2 almost identical tables.
Each one is about 1.2 Billion rows, 0.5 Tb each.
I've truncated one of them and started SHRINK DB WITH REORGANIZE PAGES
It is running already for 3 days.
When should I start to worry :)
Thank you in advance
Hi There,I have an update statement to update a field of a table (~15,000,000records). It took me around 3 hours to finish 2 weeks ago. After thatno one touched the server and no configuration changed. Untilyesterday, I re-ran it again and it took me more than 18hrs and stillnot yet finished!!!What's wrong with it? I can ran it successfully before. I have triedtwo times but the result was still the same.My SQL statement is:update [all_sales] aset a.accounting_month = b.accounting_monthfrom date_map bwhere a.sales_date >= b.start_date and a.sales_date < b.end_date;An index on [all_sales].sales_date is built successfully.A composite index on ([date_map].start_date, [date_map].end_date) isbuilt successfully.My server config is:SQL Server 2000 with Service Pack 3Windows 2000 with Service Pack 4DELL PowerEdge 6650 ServerDUAL XEON 1900MHz Processors2G RAM2G Page File on Drive C2G Page File on Drive DDELL Diagnostics on all SCSI harddisks were all PASSED.Any experts could simly give me a help????Thanks x 1,000,000,000
View 4 Replies View Related
Hi,
Its a common issue with reporting services, exporting a report with huge data to excel takes long time to render. Im facing the same issue. Trying to export a SSRS 2005 report to Excel 2003 takes very long time.
Problem 1:
The time taken to generate the excel report is pretty long (about 10 minutes) as the report runs to hundreds of pages. (The excel has about 30,000 rows and is ~15 MB)
Problem 2:
Once I open the excel and close it the size reduces to half of it. This is understood because of lot of characters values in the report that can be represented as single byte string, that€™s probably where Excel is making a difference. In Reporting Services it always write strings as 2-byte Unicode, but Excel will always try to compress to single byte when possible.
Am majorly concerned about the Problem 1. Any solutions would be highly appreciated. Thanks in advance.
I have a report which is fairly simple but takes a very long time..
It involves the incidents being counted by categories hence it has several Union All.
Also the report numbers are generetd through 2 tables hence within every Union All tehre is a left or an Inner join.
sample code:
SELECT
1 Sort_Order,
COUNT(*) AS Call_Count,
'Incident Resolved at Level 1' AS Count_Type
FROM HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM1 T1
INNER JOIN HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM2 T2
ON T1.NUMBERPRGN = T2.NUMBERPRGN
WHERE PROBLEM_STATUS = 'closed'
AND T2.THIRD_ASSIGNEE IS NULL
AND T2.THIRD_ASSIGNMENT IS NULL
AND T1.SECONDARY_ASSIGNEE IS NULL
AND HAL_FIRST_RES='t'
AND DATEPART(mm, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @MONTH
AND DATEPART(yy, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @YEAR
AND T1.OTI_ORIGINATOR IN (SELECT Userid FROM HOUAPPS286.HALServiceDesk.dbo.ServiceCenterAgents)
UNION ALL
-- Calls RESOLVED BY L2
SELECT
2 Sort_Order,
COUNT(*) AS Call_Count,
'Incidents Resolved at Level 2 or 3' AS Count_Type
FROM HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM1 T1
LEFT JOIN HOUAPPS237.CallsAndIncidents.dbo.PROBSUMMARYM2 T2
ON T1.NUMBERPRGN = T2.NUMBERPRGN
WHERE (HAL_FIRST_RES<>'t' OR HAL_FIRST_RES IS NULL)
AND PROBLEM_STATUS = 'closed'
AND DATEPART(mm, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @MONTH
AND DATEPART(yy, DATEADD(hour, -@offset, CAST(T1.OPEN_TIME AS DATETIME))) = @YEAR
AND T1.OTI_ORIGINATOR IN (SELECT Userid FROM HOUAPPS286.HALServiceDesk.dbo.ServiceCenterAgents)
UNION ALL
could you suggest what might be the reason why teh report churns for so long.
thanks,
kiran.
I have a vb.net application using report services that has a big delay when I set the parameters with which to call the report.
I create a new reporting.reportviewer.
I set the ReportServerCredentials.NetworkCredentials, ReportServerUrl, ProcessingModem, ReportPath and everything is fine.
When I call SetParameters with a very simple parameter set, I get a delay of between 0.5 and 2.5 seconds. That delay is very noticible to the users. Below is an extract of a sql profiler trace to a database showing the start time, end time, event class and data text of the sql. I've marked the area with the delay in red.
I have no idea what is happening at that time, but Is there anything I can do to get rid of that delay?
It seems that it could be the first time the my application has had to interface with reporting services.
21/07/2006 13:29:48 363 21/07/2006 13:29:48 363 10 exec ReadChunkPortion @ChunkPointer=0xFDFF126D000000006804000001000400,@IsPermanentSnapshot=1,@DataIndex=4148,@Length=8
21/07/2006 13:29:48 363 21/07/2006 13:29:48 363 10 exec ReadChunkPortion @ChunkPointer=0xFDFF126D000000006804000001000400,@IsPermanentSnapshot=1,@DataIndex=8,@Length=4100
21/07/2006 13:29:48 363 21/07/2006 13:29:48 363 10 exec sp_reset_connection
21/07/2006 13:29:48 363 21/07/2006 13:29:48 363 10 exec CreateSession @SessionID='5zz5gh2wgwfs2hf0qb0gh155',@ReportPath=N'/Symphony Reporting/report3',@Timeout=600,@AutoRefreshSeconds=0,@OwnerSid=0x010500000000000515000000F13F1E839A1DDABDC36D00302B060000,@OwnerName=N'MCR-SYSTEMS
hutchinson',@AuthType=1,@DataSourceInfo=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,@EffectiveParams=N'<Parameters>
<Parameter>
<Name>DataSource</Name>
<Type>Integer</Type>
<Nullable>False</Nullable>
<AllowBlank>False</AllowBlank>
<MultiValue>False</MultiValue>
<UsedInQuery>False</UsedInQuery>
<State>MissingValidValue</State>
<Prompt />
<PromptUser>True</PromptUser>
</Parameter>
<Parameter>
<Name>AuthLvl</Name>
<Type>Integer</Type>
<Nullable>False</Nullable>
<AllowBlank>False</AllowBlank>
<MultiValue>False</MultiValue>
<UsedInQuery>False</UsedInQuery>
<State>MissingValidValue</State>
<Prompt />
<PromptUser>True</PromptUser>
</Parameter>
<Parameter>
<Name>Home</Name>
<Type>Integer</Type>
<Nullable>False</Nullable>
<AllowBlank>False</AllowBlank>
<MultiValue>False</MultiValue>
<UsedInQuery>False</UsedInQuery>
<State>MissingValidValue</State>
<Prompt />
<PromptUser>True</PromptUser>
</Parameter>
<Parameter>
<Name>SiteFilter</Name>
<Type>Integer</Type>
<Nullable>False</Nullable>
<AllowBlank>False</AllowBlank>
<MultiValue>True</MultiValue>
<UsedInQuery>False</UsedInQuery>
<State>MissingValidValue</State>
<Prompt>Select Required Site(s)</Prompt>
<PromptUser>True</PromptUser>
</Parameter>
<Parameter>
<Name>DateFilter</Name>
<Type>DateTime</Type>
<Nullable>False</Nullable>
<AllowBlank>False</AllowBlank>
<MultiValue>True</MultiValue>
<UsedInQuery>False</UsedInQuery>
<State>MissingValidValue</State>
<Prompt>Select Required Date(s)</Prompt>
<PromptUser>True</PromptUser>
</Parameter>
</Parameters>'
21/07/2006 13:29:48 377 21/07/2006 13:29:48 377 10 exec sp_reset_connection
21/07/2006 13:29:48 377 21/07/2006 13:29:48 377 10 exec ObjectExists @Path=N'/Symphony Reporting/report3',@AuthType=1
21/07/2006 13:29:48 847 21/07/2006 13:29:48 847 10 exec sp_reset_connection
21/07/2006 13:29:48 847 21/07/2006 13:29:48 847 10 exec GetSessionData @SessionID='5zz5gh2wgwfs2hf0qb0gh155',@OwnerSid=0x010500000000000515000000F13F1E839A1DDABDC36D00302B060000,@OwnerName=N'MCR-SYSTEMS
hutchinson',@AuthType=1,@SnapshotTimeoutMinutes=1440
21/07/2006 13:29:48 847 21/07/2006 13:29:48 847 10 exec sp_reset_connection
Hi,
I need to modify existing table in my database to varchar(max) from varchar(2000)
This table contains 30 million plus rows and has more than 70 columns.
now when i am running alter command for this it take too long(more than 9 mins) which is not acceptable. . Is their any way to reduce this execution time
Following is the query i am using for this
ALTER TABLE Receipt
ALTER COLUMN CUSTOM VARCHAR(MAX) NULL
Please let me know if you have any suggestion to improve this
TAI
Prashant
We have a web-based third-party application that has both background processes and user activity requests running in the same database (SQL Server 2005 SP2). The problem is that a background process will start a long-running transaction and hold an exclusive lock on a few rows in a given table (a small table, <100 rows). The web clients need to scan this same table, but when their "select *" statements get to those locked row(s), the web client queries stall waiting for that exclusive lock to be released. This effectively brings the entire web front end to a halt because all clients must hit this table for each user action. I realize that this is the classic lock condition that multiversioning databases like Oracle, PostgreSQL, SQL Server Compact Edition, and other databases do not suffer because they don't use shared read locks like SQL Server. But since we're on SQL Server for this app, what is the way to get around this problem? Modifying the clients to use WITH (NOLOCK) is not an option... there will be major consistency issues unless the clients run in Read Committed or higher. Any ideas? We could tweak this app if needed. Does SQL Server 2008 introduce multiversioning or at least some mechanism to get around this problem? I did not see it mentioned on the Microsoft site, but maybe I missed it. Thanks in advance.
Austin
I have a table tblCustTrans which contains
custid int
transid int
startdate datetime
value int
the custid, transid and startid are composite primary key.
the table contains more than 10 million records. Now i want to fetch record for
select * from tblcusttrans where startdate > = 10/10/2006 10:00:000 and startdate <= 10/10/2006 11:00:000
This statement is taking more than 2 hours to fetch the data. is there a way to fetch the record with less time
Regards
Hi All,
I'm trying to rebuild my master database for sql server 2000. The process of rebuilding stared fine. But it is almost 4 hours since it got started. Performing it on a test system. Got doubtful and started the same on another test system. Issue is same and it is almost 2 hours. The Db size is less than 100 MB in both cases. IS IT NORMAL? I've tried the same for SQL SERVER 2005 and it got finished in couple of minutes. Please advise.
Hi,
we've created a ata Flow task to execute several aggregations. Our Task access database using OLE DB source and selects data out of our staging tables (we've analyzed the query using MS SQL Management Studio which didn't showed any issues). But when we try to run our dataflow task using SSIS (debug mode and DTEXEC from command line) we experince that tasks seem to stop during processing.
Unfortunately we didn't found a way to see long logfile entries which explain the issue to us.
We do use several aggregation tasks divided in 4 sequences. Unfortunately we just see one logical processor out of 4 logical processors working. It is a Windows 2003 SP2 machine with SQL 2005 SP2 on top of it.
Is there any solution to use all processors to one package for parallel execution?
So basically we experience two issues:
- SSIS seems to stop somewhere in thre middle
- SSIS just uses one processor instaed of all four
your advice is appreciated
I broke up my cube into 24 partitions. There are about 630M total fact rows in that cube.
When I open the cube to browse in BIDS or SQL Management Studio it takes very long time to open (I think 30 minutes).
Profiler does not show that it's running a query, but messages like this keep appearing throughout the time it's opening to browse:
Progress Report Begin, 14- Query, Started reading data from the 'p0' partition.
Progress Report End, 14- Query, Finished reading data from the 'p0' partition.
Progress Report Begin, 14- Query, Started reading data from the 'p10' partition.
Progress Report End, 14- Query, Finished reading data from the 'p10' partition.
and goes on like that....
Hi,
The scenario is the data comes from various sources and its staged into staging database. From this staging database it goes into data warehouse database. Everyday this staging database is truncated and repopulated from various sources.
I've a dimension table called DimCustomers which consists of around 300,000 rows and has lots of different types of SCD columns. It takes around 4-5 hours to load data from staging to this dimension table. Currently I'm using a For Loop container which uses a store proc to extract 15000 rows each time and populate my dimension tables. First couple of loops it goes off quickly but as and when the number reaches half of the count it slows down and hence it takes around 4-5 hours to load data.
What would be the best approach to populate this kind of dimension table.
Thanks
I have a table having 220 lakhs of records and one of the column is Full Text enabled.We have used ContainsTable() to search for data, but we are unable to get results as expected. so we done rebuild.During Index Rebuild, population is failed.I have found this error in error log and it is saying to do resume population.So I want to know how long it takes to complete Resume population process.
look at the below more details about FT Index table.
Row count - 22155112
Index space - 1,903.250 MB (1.9 GB)
Data space - 87,552.258 MB (87 GB)
sqlserver2008 R2
and the below query we have used
HTML Code:
SELECT Distinct top 50 cal.case_id,cal.cas_details
From g_case_action_log cal (READUNCOMMITTED)
inner join containstable(es.g_case_action_log, cas_details,
' ("235355" OR "<br>235355" OR "235355<br> ") ') as key_tbl on cal.log_id = key_tbl.[key]
Where cal.product_id = 38810 ORDER By cal.case_id DESC
This query is not going to search in recent inserted/updated rows. this is the actual issue we are facing.
how to fix this error and if population need to be resume, then how long takes to do resume population.
I have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?
We have a proc that adds some fields to a few tables of ours and normally there are no issues. For one of our client databases this process is taking anywhere from 5-10 minutes to add the fields. This causes an issue where the app will timeout waiting. After plugging around and looking at the proc and trying different items i found it to only be for this one database and ONLY when there is data in the table. If i truncate the table and run the same procedure everything is fine. Tables all have same index on 4 columns and the columns being added are not indexed because of the stupid hoops we have to jump thru to pre-pivot data for our reporting package.
View 4 Replies View Related
Hi,
I have problem with JDBC 2005 (1.1) running against SQL 2005 Express edition (SP2). Sometimes, the statement takes long time (more than 10 seconds). Sometimes, the same statement takes just a few seconds. It is very unpredictable.
The query that we have problem is most of the time is join sql statement.
Does anyone see this problem?
Thanks,
Hi,
I was just wondering if anybody came across this behaviour where closing a Fast Forward Read only cursor takes abnormally long time to close. I am running SQL Server 2005 standard edition.
Thanks
Nand
Hi all,
We have to support forced failover under certain scenarios. Whilst using 'ForceFailoverAndAllowDataLoss' work perfectly the database is not available for several minutes. The failover command returns very quickly, but the database enters a recovery/restore state and will not accept connections for up to 2 minutes.
Am I missing an additional step that would speed this up?
Many thanks,
Nick