I have the following table and have included some sample data. Basically, the records are grouped by opid and it shows ownership changes for the opids. It only shows the owner change date which is the date that the owner was assigned to the opid. What I want to figure out is the date that the owner ceased to be assigned to the opid as well. If it is still the current owner then the end date should just be the current date.
Code Snippet
CREATE TABLE #op_owner_history(
[opshid] [int] IDENTITY(1,1) NOT NULL,
[opid] [int] NOT NULL,
[role] [varchar](30) NOT NULL,
[rep] [char](20) NOT NULL,
[percentage] [int] NOT NULL,
[ownerchg_date] [datetime] NOT NULL,
[ownerchg_rep] [char](20) NOT NULL,
CONSTRAINT [PK_#op_oppshare_history] PRIMARY KEY CLUSTERED
(
[opshid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 90) ON [PRIMARY]
) ON [PRIMARY]
SET IDENTITY_INSERT #op_owner_history ON
GO
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (4653, 23795, 'Sales','KOHLENBERG', 100, '9/26/2006 3:57:22 PM', 'Kohlenberg')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (8576, 23795, 'Sales', 'Haber', 100, '1/3/2007 10:40:00 AM', 'ADMIN')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (9363, 23795, 'Sales', 'KOHLENBERG', 100, '1/4/2007 12:40:14 PM', 'Kohlenberg')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (2919, 24623, 'Sales', 'COLEMAN', 100, '9/1/2006 12:02:03 PM', 'Dunkel')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (15475, 24623, 'Sales', 'COLEMAN', 100, '5/8/2007 8:10:51 AM', 'Woodruff')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (8580, 24623, 'Sales', 'Woodruff', 100, '1/3/2007 10:40:00 AM', 'ADMIN')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (4310, 5548, 'Sales', 'KOHLENBERG', 100, '9/19/2006 1:53:47 PM', 'KOHLENBERG')
INSERT into #op_owner_history (opshid,opid, role,rep,percentage,ownerchg_date,ownerchg_rep) VALUES (10649, 5548, 'Sales', 'HABER', 100, '2/7/2007 3:50:40 PM', 'Kohlenberg')
Based on this sample data, here is what I want to see in the results: (My apologies, I couldn't get it formated very well to make it more readable.)
opshid opid role rep percentage ownerchg_date End Date ownerchg_rep
4310 5548 Sales KOHLENBERG 100 9/19/2006 1:53:47 PM 2/7/2007 3:50:40 PM KOHLENBERG
10649 5548 Sales HABER 100 2/7/2007 3:50:40 PM GETDATE() Kohlenberg
4653 23795 Sales KOHLENBERG 100 9/26/2006 3:57:22 PM 1/3/2007 10:40:00 AM Kohlenberg
8576 23795 Sales Haber 100 1/3/2007 10:40:00 AM 1/4/2007 12:40:14 PM ADMIN
9363 23795 Sales KOHLENBERG 100 1/4/2007 12:40:14 PM GETDATE() Kohlenberg
2919 24623 Sales COLEMAN 100 9/1/2006 12:02:03 PM 1/3/2007 10:40:00 AM Dunkel
8580 24623 Sales Woodruff 100 1/3/2007 10:40:00 AM 5/8/2007 8:10:51 AM ADMIN
15475 24623 Sales COLEMAN 100 5/8/2007 8:10:51 AM GETDATE() Woodruff
Can anyone advise me as to how I can add the date and time to 2 columns in the sql server database for each record that is added. I'd prefer not to use the webform. Can sql server add the date automatically to the row? thanks
how to select record from the table where the data between a range. example between 2/16/2005 and 12/16/2005. the data record in the table formated like this ( 2/16/2005 11:44:38 PM). help me with some sql code, thanks
With this, I can build a query that subtracts the start and end dates to give me the total differences between each record... But, how do I write a query that can count the elapsed time between the current record's "start time" and the prior record's "end time" to give me the elapsed time between each record?
I want to get latest updated date on each transid and only for status =approved .
------------------- out put would be ------------ idtransid date status 31013/1/2014 approved 61031/2/2014 approved
table ----------- idtransid date status 11011/1/2014 approved 21012/1/2014 close 31013/1/2014 approved 41021/2/2014 approved 51022/2/2014 close 61031/2/2014 approved
I just discovered this cool forum. I am fairly new to T-SQL, so please bear with me.
Here is my problem. I am trying to return 1 record for each distinct MachineName, based on the most current CreateTime.
I have tried a bunch of different things, but the follwing query seems to get me close, except for all of the records, per MachineName, that aren't the newest CreateTime. Can anyone offer a suggestion I may be missing?
Here is my query:
SELECT rcv.Name AS MachineName, r.CreateTime, rpv.Path + rpv.Name AS ResourcePool
FROM dbo.Result_View AS r WITH (NOLOCK) INNER JOIN dbo.ResourceConfiguration_View AS rcv WITH (NOLOCK) ON r.ResourceConfigurationId = rcv.Id INNER JOIN dbo.Resource_View AS rv WITH (NOLOCK) ON rcv.ResourceId = rv.Id INNER JOIN dbo.ResourcePool_View AS rpv WITH (NOLOCK) ON rv.ResourcePoolId = rpv.Id
WHERE (rpv.Name NOT LIKE 'Archive') AND (r.CreateTime > '2/1/2008') AND (r.CreateTime = (SELECT TOP (1) r.CreateTime FROM dbo.Result_View))
ORDER BY MachineName
I have added the '2/1/2008' filter, so as not to hammer the DB too hard. It goes back for some time.
The following is a VB code which I use it to check the existence of the record before I insert a new record into my SQL 7.0 database. When I run the vb code, I got an error which is "-2147217913 [Microsoft][ODBC SQL Server Driver][SQL Server]The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value." I couldn't figure out what's wrong with my code especially the WHERE clause. Please help me look into this problem. TQ.
Private Sub AddDate() Dim rstDate As ADODB.Recordset Dim myDate As Date Dim Criteria As String
Criteria = "SELECT Date " _ & "FROM DateGen " _ & "WHERE Date = '" & myDate & "'"
Set rstDate = New ADODB.Recordset
With rstDate .ActiveConnection = cn .CursorType = adOpenDynamic .LockType = adLockOptimistic .Open Criteria End With
If rstDate.RecordCount > 0 Then RecordExist = True Else RecordExist = False rstDate.AddNew rstDate("Date") = Format(myFileDate, "dd-mm-yyyy") rstDate.Update End If rstDate.Close End Sub
How can I automatically change records by a specific date specified inside the record. An example would be the way ebay sales work. How does ebay have the status of an item change to closed, at the time inside the item record of the database.
I know i could use triggers or something to check the current date against the enddate everytime the record is accessed, but is there a more efficient method?
I HAVE THIS SQL STATEMENT WHICH GET THE MIN(AMOUNT) and MAX(AMOUNT) and DISPLAY IT IN A SINGLE ROW. HOW CAN I GET THE RECORD BEFORE THE MAX (AMOUNT) INBETWEEN DATES IN CASE THERE ARE 4 RECORDS WITH SAME EMPLOYEENO IN THE DATE RANGE SPECIFICIED ? THIS IS SORTED BY EMPLOYEENO AND STARTDATE DESC
SELECT EmployeeNo, StartDate AS StartDate, MIN(Amount) AS oldsalary, EndDate AS EndDate, BenefitCode, (SELECT TOP 1 MAX([amount]) FROM EMPBENEFITS T2 WHERE T2.employeeno = T.employeeno AND startdate >= '2001-06-01' AND startdate <= '2007-06-02') AS newsalary FROM dbo.empBenefits T WHERE (StartDate IN (SELECT TOP 1 ([startdate]) FROM EMPBENEFITS T1 WHERE T1.employeeno = T.employeeno AND Benefitcode <> 'HON' AND startdate >= '2001-06-01' AND startdate <= '2007-06-02')) GROUP BY EmployeeNo, Amount, BenefitCode, StartDate, EndDate, Amount ORDER BY EmployeeNo, StartDate DESC
I am currently using this SQL code to capture some records over the last 2 months and it has been working great. I am now being asked if I can change this code with specifications:
1) Scan the records in the system until the count (*) as Volume reaches 30 because they prefer that as a denominator when figuring an average
2) Only run the scan for a maximum of 6 months.
So, there will most likely be some records that do not reach a volume number of 30 in this date range. In this instance we will just take the maximum volume number reached at 6 months.
So, how can I write this so it will build the file each time a record has reached the maximum of 30 and keep scanning back until we reach 6 months? If someone could lead me in the right direction on the proper order of the methodology in my code to accomplish these results it would be greatly appreciated. Desperate!
declare @startdate smalldatetime, @enddate smalldatetime , @month int, @year int
pe1.patev_loc_id as LocID, pp_cproc_id_r as ProcID, count (*) as Volume, sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time)) as Minutes, sum (datediff (mi, pe1.patev_event_time, pe2.patev_event_time))/count(*) as AvgMin
from risdb_rch08_stag..performed_procedure (index pp_serv_time_r_ndx), risdb_rch04_stag..patient_event pe1, risdb_rch04_stag..patient_event pe2
where pp_service_time_r between @Startdate and @Enddate and pp_asn_req_no = pe1.patev_asn_req_no and pp_asn_seq_no = pe1.patev_asn_seq_no and pp_status_v = 'CP' and pp_rep_id > 0 and pe1.patev_event_code = 'PB' and (pp_asn_req_no = pe2.patev_asn_req_no and pp_asn_seq_no = pe2.patev_asn_seq_no and pe2.patev_event_code = 'PL') and datediff (mi, pe1.patev_event_time, pe2.patev_event_time) > 0
I have a base query that will return the ID, StartDate and Code for all IDs. I SELECT only for Codes 5 and 9. For most of the IDs I return a record for both a Code 5 and Code 9. They will have different dates however. How could I select from this base query one record for each ID with the oldest date? The items in yellow are the ones that I would want to return to a report in SSRS. Is there a way to put this data in a temp table and read through it to compare IDs and grab the one with the older date?
file_target_ID is identity column which will repeat per files_ID
Now, i just shown Target log for file_ID 77796 see the last Target Date i want another column which returns a previous log Target date for each files beside Target date column
Like this ..
Target Date New Column 2015-09-09 00:00:00.000 2015-09-16 00:00:00.000 2015-09-16 00:00:00.000 2015-09-25 00:00:00.000 2015-09-25 00:00:00.000 New Target date after 25-9-2015
I used this statement, select * from table1 where date1 = null, in SQL Query window and got a few records back. Now, I used the same statement in my VB 5 code and no record is found. How do I select all the records in table1 which do not have values in field date1? Thanks for the help.
I'm wanting a SQL Formula to insert into my Accounting Systems which uses a SQL Database which, when I add a new product code I want a custom field to update with today's date.
I've tried to use GetDate () however, what this does is to update all records with this date (each record has this custom field assign to it). I only want the new record to show todays date so I know when the product was created in the database. Should I be looking at creating this with a Function?
I need a trigger to set the creation date of a new record in the database... I tried the following, but it changed all records, not just the new one...
CREATE TRIGGER trgCreationDate ON [dbo].tabCustomerLookup FOR INSERT AS BEGIN UPDATE tabCustomerLookup SET CreationDate = getdate() END
Looking to see if thier is a better way to find the last record entered in a group of records.
What I'm doing now is finding the max for the secound column and then doing a sub query to find the max of the third column having the second columns equal.
Table example using simplied data.
PolId
CoveragId
EffDate
Status
Limit1
2
1
9/7/2007
a
10000
2
2
9/7/2007
a
150000
2
2
10/1/2007
a
200000
3
1
9/7/2007
a
10000
The parent program addes a row every time the data is changed. To make things worst; the records arn't always in sqenal order like the above table and some time edits the row instead.
The current query returns a single value. from a single table.
Current code used in the select protion on a larger query. bpi = basicpolicyInformation.
( Select c1.limit1 From AFW_Coverage as c1 Where c1.PolId=bpi.PolId and c1.CoverageId = (select max(CoverageId) as CoverageId From AFW_Coverage as c where c.PolId = c1.PolId and c.CoverageCode = 'Dwelling' and status <> 'D' ) and c1.effDate = (select max(Effdate) as Effdate From AFW_Coverage as c where c.PolId = c1.PolId and c.CoverageID = c1.CoverageId )
Explain the current code. It uses the two sub queries to find the correct record ID that has the data needed.
I have a situation where an agent has number of activities for a certain date range. If an agent has multiple activities within certain date range, I would like BALANCE BEFORE from the first activity and BALANCE AFTER from the last activity. Here is my current SQL query that returns the following data:
DECLARE @BeginDate Datetime DECLARE @EndDate Datetime Set @BeginDate = '05-1-2015' Set @EndDate = '05-31-2015' SELECT a.AgentName, R.BALANCEBEFORE,
[Code] ....
AGENTNAME BALANCE BEFORE BALANCE AFTER DATE DOUGLAS 9738.75 9782.75 2015-05-11 DOUGLAS 9782.75 9804.75 2015-05-12 DOUGLAS 9804.75 9837.75 2015-05-13
In the sample data above, ideally I would like my query to return data as follow:
AGENTNAME BALANCE BEFORE BALANCE AFTER DOUGLAS 9738.75 (from first activity) 9837.75 (from last activity)
Not sure how I can write sql query to accomplish this.
Hi All, Here is my story, how to change a column called Flag_Status based on the maximum Updated date. i.e. i want to make Flag_Status be 1 for the records which have maximum Updated_date (current record) and the rest to make it 0. for example accountID 1 has three records updated, but only one is current the rest are historical, thus i want the history record to be Falg_status 0 and the current record be 1. Note that Inserted_Date and Updated_Date are created using SSIS Derived column During loading the source table, it helps me when each record is inserted into the Data warehouse.
ChangeID ChangeDate EquipmentID ModuleID EquipStatus 1 12/9/08 230 1789 Normal 2 13/9/08 450 1245 Normal 3 17/9/08 230 1789 Open 4 21/9/08 230 1899 Open 5 21/9/08 450 1674 Normal 6 22/9/08 450 2364 Normal
Given a date, what module was each equipment item in on that date?How do I get the date of the nearest previous event from a list like this? I got a query from one of the post in this Forum only using Cross Apply to find the nearest record from the above table based on Date i.e.
SELECT outerT.* FROM your_table AS outerT CROSS APPLY ( SELECT TOP 1 equipment_id , change_date FROM your_table AS innerT WHERE innerT.change_date <= @point_in_time AND innerT.equipment_id = outerT.equipment_id ORDER BY change_date DESC ) AS applicable_records WHERE applicable_records.change_date = outerT.change_date
The problem is I need to get this query without using Cross Apply as i need to use the same for the LINQ which doesn't support Cross Apply.
The "Last" function in the query below (line 4 & 5) is not exactly what I'm after. The last function finds the last record in that table, but i need to find the most recent record in the table according to a date field.
Code: SELECT tblinmate.statusid, tblinmate.activedate, Last(tblclassificationhistory.classificationid) AS LastOfclassificationID, Last(tblsquadhistory.squadid) AS LastOfsquadID, tblperson.firstname, tblperson.middlename, tblperson.lastname,
[Code] ....
The query below finds the most recent record in a table according to a date field, my problem is i dont know how to integrate this Query into the above to replace the "Last" function
Code: SELECT a.inmateID, a.classificationID, b.max_date FROM ( SELECT tblClassificationHistory.inmateID, tblClassificationHistory.classificationID,
I am working on a query that needs to return the record order number with the most recent requested delivery date.
It seems to work most of the time, but I have found some glitches for some of the items.
example is my item 10702, it is showing 2 records (both valid ones) Record 1 is order # 10450-0, requested delivery date 03/21/2014 Record 2 is order # 10510-0, requested delivery date 04/29/2014
I need to only get the records with the most recent delivery date, in this example that would be 04/29/2014
This query is what I have so far:
SELECT s.PriorQuoteNumber ,s.PriorItemNumber ,s.PriorQuoteDate FROM ( SELECT s.SalesQuoteNumberAS 'PriorQuoteNumber'
[code]....
WHERE s.rn = 1What am I missing in my query> how can I change it so it only returns the most recent date?
CREATE TABLE Car ( carId Char (20) NOT NULL, model Char (20) NOT NULL, importDate smalldatetime NOT NULL, custId Varchar (50) NOT NULL, CONSTRAINT Car_PK PRIMARY KEY (carId));
I would like to know whether it is possible to add and updated date column in a slow changing dimension table using the slow changing dimension data flow transformation.
I would like to keep track of what record is updated in the dimension table based on the data being processed.